https://arxiv.org/api/T+3HIO8qm3E1XuIcGzy/6BEUyEQ2026-04-09T08:19:41Z933818015http://arxiv.org/abs/2503.13851v3Thermodynamic uncertainty relations for multi-terminal systems with broken time-reversal symmetry2026-01-06T11:27:00ZWe investigate the thermodynamic uncertainty relations (TURs) in steady-state transport for a multi-terminal system consisting of two conducting terminals and N-2 probe terminals, within the linear response regime under broken time-reversal symmetry. We independently derive exact bounds on the TURs for the steady-state particle and heat currents under a strong constraint on the Onsager coefficients. Based on our proposed exact bounds, the analysis reveals that the bounds differ for particle and heat currents and are dependent on the system parameters. Furthermore, we demonstrate that under specific parameter conditions, the TURs of the particle and heat currents have a unified minimum value that depends solely on the number of terminals.2025-03-18T02:52:07Z15 pages, 3 figuresYanchao ZhangXinzhi LiuXiaolong LüShanhe Suhttp://arxiv.org/abs/2512.19768v2A Dynamical-Time Framework for the Dynamics of Charged Particles2026-01-06T02:33:59ZWe present a dynamical framework for modeling the motion of point-like charged particles, with or without mass, in general external electromagnetic fields. A key feature of this formulation is the treatment of time coordinate as a dynamical variable. The framework applies to the relativistic regime while consistently admitting a nonrelativistic limit. We also introduce a representation of particle trajectories in velocity space, which provides clear insight into the nature and asymptotic behavior of the dynamics. As an application, we compare the motion of massive and massless particles in a constant electromagnetic field and find that, for identical field configurations, their asymptotic behavior is independent of both mass and initial conditions. Finally, we explore the computational advantages of the dynamical-time formulation over the conventional uniform-time approach in two case studies: a uniform electromagnetic field, and an elliptically polarized wave propagating along a uniform magnetic field. In both scenarios, the proposed scheme exhibits improvements in accuracy and computational efficiency.2025-12-22T02:59:12Z11 pages, 4 figures. Version v2: Concluding remarks rewritten; minor notational changes; one additional referenceZui OportoGonzalo Marcelo Ramírez-Ávilahttp://arxiv.org/abs/2601.02338v1Merry-go-round and time-dependent symplectic forms2026-01-05T18:33:41ZIn the merry-go-round fictitious forces are acting like centrifugal force and Coriolis force. Like the Lorentz force Coriolis force is velocity dependent and, following Arnold, can be modeled by twisting the symplectic form. If the merry-go-round is accelerated an additional fictitious force shows up, the Euler force.
In this article we explain how one deals symplectically with the Euler force by considering time-dependent symplectic forms. It will turn out that to treat the Euler force one also needs time-dependent primitives of the time-dependent symplectic forms.2026-01-05T18:33:41Z17 pages, 1 figureUrs FrauenfelderJoa Weberhttp://arxiv.org/abs/2601.02169v1Broadband quasistatic passive cloaking: bounds and limitations in the near-field regime2026-01-05T14:46:45ZWe consider here several aspects of the following challenging question: is it possible to use a passive cloak to make invisible a dielectric inclusion on a finite frequency interval in the quasistatic regime of Maxwell's equations for an observer close to the object? In this work, by considering the Dirichlet-to-Neumann (DtN) map, we not only answer negatively this question, but we go further and provide some quantitative bounds on this map that provide fundamental limits to both cloaking as well as approximate cloaking. These bounds involve the following physical parameters: the length and center of the frequency interval, the volume of the cloaking device, the volume of the obstacle, and the relative permittivity of the object. Our approach is based on two key tools: i) variational principles from the abstract theory of composites and ii) the analytic approach to deriving bounds from sum rules for passive systems. To use i), we prove a new representation theorem for the DtN map which allows us to interpret this map as an effective operator in the abstract theory of composites. One important consequence of this representation is that it allows one to incorporate the broad and deep results from the theory of composites, such as variational principles, and to apply the bounds derived from them to the DtN map. These results could be useful in other contexts other than cloaking. Next, to use ii), we show that the passivity assumption allows us to connect the DtN map (as function of the frequency) with two important classes of analytic functions, namely, Herglotz and Stieltjes functions. The sum rules for these functions, combined with the variational approach, allows us to derive new inequalities on the DtN map which impose fundamental limitations on passive cloaking, both exact and approximate, over a frequency interval. We consider both cases of lossy and lossless cloaks.2026-01-05T14:46:45Z72 pages, 3 figuresMaxence CassierGraeme W. MiltonAaron Weltershttp://arxiv.org/abs/2501.18604v2The magnetic scalar potential for a rectangular prism2026-01-05T11:52:52ZWe analytically solve Poisson's equation for the magnetic scalar potential generated by a uniformly magnetized rectangular prism and determine a closed-form solution for the magnetic scalar potential given only in terms of arctan and natural logarithmic functions. We show that the magnetic scalar potential can be written as a demagnetization vector, containing all the geometric information, multiplied with the magnetization, analogous to demagnetization tensors. We validate the derived analytical expression for the magnetic scalar potential by comparing with a finite element simulation and show that these agree perfectly. We finally extend the concept of the demagnetization vector and tensor, which contains the geometric information for the source generating the potential, to gravitational objects.2025-01-19T13:19:08Z7 pages, 2 figuresIEEE Transactions on Magnetics, 62, 7000206, 2026Berian JamesStefan PollokJes FrellsenRasmus Bjørk10.1109/TMAG.2025.3632626http://arxiv.org/abs/2601.01981v1How localized nonlinear losses condition the acoustical design of a self-sustained oscillator: the clarinet and its register hole2026-01-05T10:35:45ZThe register tube marks the invention of the clarinet in the early eighteenth century, tripling the range of its ancestor, the chalumeau, and giving it the widest range among wind instruments. Opening this narrow tube causes the fundamental frequency of the played note to increase by a factor of three, from the first to the second register of the resonator. The geometry and location of the register hole condition not only this mode selection mechanism, but also the global tuning of the second register. However, existing self-sustained nonlinear models of reed instruments fail to predict whether a register transition can occur, limiting optimization of the register hole geometry. Here, we introduce a sparse self-oscillating clarinet model that includes localized nonlinear acoustic losses in the register hole. This nonlinear mechanism is shown to be necessary to reproduce register transitions observed experimentally. Using systematic exploration of the control and design parameter spaces, we identify combinations of register hole diameter, position, and chimney length that ensure reliable register transitions. We show that the competing demands of playability and tuning are only satisfied by a long and narrow tube. Our findings provide a predictive tool for instrument making, assisting manufacturers in refining clarinets as well as other reed instruments, including oboes, bassoons, and saxophones.2026-01-05T10:35:45ZNathan SzwarcbergLMATom ColinotLMAChristophe VergezLMAMichaël Jousserandhttp://arxiv.org/abs/2506.03875v3Register jumps on the clarinet: numerical and in-vitro investigation into basins of attraction and phase-tipping2026-01-05T10:30:09ZWhen playing the clarinet, opening the register hole allows for a transition from the first to the second register, producing a twelfth interval. On an artificial player system, the blowing pressure range where the second register remains stable can be determined by gradually varying the blowing pressure while keeping the register hole open. However, when the register hole is opened while the instrument is already producing the first register, the range of blowing pressures that lead to a stable second register is narrower than the full stability zone of the second register. This phenomenon is investigated numerically by performing multiple hole openings at different times, for various values of the blowing pressure and the embouchure parameter. In some narrow regions of the control parameters space, the success of a register transition depends on the phase at which the hole is opened. This illustrates an instance of phase-tipping, where the limit cycle of the closed-hole regime may intersect multiple basins of attraction associated with the open-hole regimes. Furthermore, to assess the robustness of the basins of attraction, random noise is introduced to the control parameters before the register hole is opened. Results indicate that the equilibrium regime is more robust to noise than the other oscillating regimes. Finally, long-lasting transient quasiperiodics are investigated. The phase at which the hole is opened influences both the transient duration and the resulting stable regime.2025-06-04T12:09:03ZNathan SzwarcbergLMATom ColinotLMAChristophe VergezLMAMichael JousserandLMALéonie MaignanLMAAnthia PatsinakidouLMAGiordano GattiLMAHrant ArzumanyanLMAP. F. Oliveira MoraisLMAhttp://arxiv.org/abs/2301.09355v4Generalized virial theorem for contact Hamiltonian systems2026-01-05T00:25:27ZWe formulate and study a generalized virial theorem for contact Hamiltonian systems. Such systems describe mechanical systems in the presence of simple dissipative forces such as Rayleigh friction, or the vertical motion of a particle falling through a fluid (quadratic drag) under the action of constant gravity. We find a generalized virial theorem for contact Hamiltonian systems which is distinct from that obtained earlier for the symplectic case. The `contact' generalized virial theorem is shown to reduce to the earlier result on symplectic manifolds as a special case. Various examples of dissipative mechanical systems are discussed. We also formulate a generalized virial theorem in the contact Lagrangian framework.2023-01-23T10:47:38Zv1: Preliminary version; v2: Revised version, references added; v3: Minor changes; v4: This version corrects typos, notational issues, minor technical errors, and references, and adds clarifying remarksJ. Phys. A: Math. Theor. 56, 235205 (2023)Aritra Ghosh10.1088/1751-8121/accfd3http://arxiv.org/abs/2410.08167v3Invariant measures for some dissipative systems from the Jacobi last multiplier2026-01-05T00:22:16ZHamiltonian dynamics describing conservative systems naturally preserves the standard notion of phase-space volume, a result known as the Liouville's theorem which is central to the formulation of classical statistical mechanics. In this paper, we obtain explicit expressions for invariant phase-space measures for certain (generally dissipative) mechanical systems, namely, systems described by conformal vector fields on symplectic manifolds that are cotangent bundles, contact Hamiltonian systems, and systems of the Liénard class. The latter class of systems can be described by certain generalized conformal vector fields on the cotangent bundle of the configuration space. The computation of the invariant measures is achieved by making use of the formalism of Jacobi last multipliers.2024-10-10T17:44:52Zv1: Preliminary version; v2: Improved version with some errors corrected; v3: This version corrects some typos and includes a minor modification to Definition 4.1Phys. Scr. 100, 035220 (2025)Aritra Ghosh10.1088/1402-4896/adb10bhttp://arxiv.org/abs/2510.26360v2Momentum-Transfer Framework Unifies High-Velocity Impact and Failure Across Materials, Geometries, and Scales2026-01-04T22:38:10ZMaterials that dissipate energy efficiently under high-speed impacts, from micrometeoroid strikes on spacecraft to ballistic penetration in protective systems, are essential for maintaining structural integrity in extreme environments. Yet, despite decades of study, predicting and comparing impact performance across materials, geometries, and length scales remains challenging because conventional projectile-impact models often rely on conservation-based or empirically partitioned descriptions that assume the projectile-target interaction is a closed system. Here, we relax this assumption and directly observe the momentum and energy transferred out of the projectile during impact. We find that the momentum transferred to the target consistently reaches its maximum at the ballistic-limit velocity, demonstrated through a coordinated suite of micro-projectile impact experiments spanning varied projectile diameters, target thicknesses, and impact velocities, and further supported by targeted macroscale tests. This behavior is reinforced across a broad range of independent studies encompassing metals, polymers, composites, sandwich panels, and reinforced concrete, with thicknesses ranging from nanometers to hundreds of millimeters and projectiles of spherical, blunt, ogive, and conical shape, under both normal and oblique impacts. Together, these observations reveal a consistent impact behavior across all available data: maximum momentum transfer occurs at the ballistic limit. Extending this bound into the energy absorption landscape addresses an entrenched misconception in the field by revealing that specific energy absorption inherently inflates the performance of thinner targets due to geometric normalization, rather than reflecting genuine material enhancement.2025-10-30T11:08:47ZYasara DharmadasaNicholas JaegersbergAra KimJizhe CaiRamathasan Thevamaranhttp://arxiv.org/abs/2601.01135v1Ion Clustering Regulated by Extreme Nanoconfinement Enables Mechanosensitive Nanochannels2026-01-03T09:43:54ZMechanosensitive ion nanochannels regulate transport by undergoing conformational changes within nanopores. However, achieving precise control over these conformational states remains a major challenge for both artificial soft or solid pores. Here, we propose an alternative mechanism that modulates the charge carrier density inside nanopores, inspired by transistors in solid-state electronics. This strategy leverages a novel phenomenon of confinement-regulated ion clustering in two-dimensional extremely confined nanochannels, revealed by extensive $μ$s-scale enhanced-sampling molecular simulations based on an \emph{ab initio}-refined force field and nucleation theory. The resulting \emph{force-ion transistor} enables mechanically gated control of ion transport and provides a conceptual foundation for designing ionic mechanical logic gates. Our findings offer new insights into piezochannel mechanosensing and electromechanical coupling in biosystems beyond conformational signaling, opening pathways to integrate artificial ion channels with neuromorphic devices for processing mechanical stimuli.2026-01-03T09:43:54ZKe Zhouhttp://arxiv.org/abs/2601.00643v1Reversibility, Chaos, and Attractors in Periodically Sheared Elastic Filaments2026-01-02T11:02:29ZThe dynamics of filaments in flow are central to understanding a wide range of biological and soft-matter systems, yet their behavior under time-dependent forcing remains poorly understood. Here, we investigate the long-time dynamics of Brownian inextensible elastic filaments subjected to strong uniform oscillatory shear by combining microfluidic experiments on actin filaments with numerical simulations based on a fluctuating Euler-Bernoulli elastica model in a viscous fluid. As the oscillation period increases, irreversibility emerges from the interplay of flow-induced deformations and thermal noise. This leads to a departure from reversible, deterministic rigid-body dynamics: in this regime, the filaments cycle between nearly straight, flow-aligned conformations at full periods and buckled shapes at half periods. Owing to the time-glide symmetry of the system, two such attracting states in fact coexist with a phase shift of half a period. The system spontaneously selects one, but occasionally switches between them as a result of noise, producing intermittent transitions between apparent order and disorder. This system constitutes an experimentally accessible realization of stochastic symmetry breaking, attractor hopping, and intermittency in a minimal nonequilibrium soft-matter system, with novel implications for the design and control of soft matter systems under time-dependent flows.2026-01-02T11:02:29Z12 pages, 6 figuresFrancesco BonacciBrato ChakrabartiOlivia du RoureAnke LindnerDavid Saintillanhttp://arxiv.org/abs/2401.00911v3Calculus and applications2026-01-01T00:59:52ZThis is an introduction to calculus, and its applications to basic questions from physics. We first discuss the theory of functions $f:\mathbb R\to\mathbb R$, with the notion of continuity, and the construction of the derivative $f'(x)$ and of the integral $\int_a^bf(x)dx$. Then we investigate the case of the complex functions $f:\mathbb C\to\mathbb C$, and notably the holomorphic functions, and harmonic functions. Then, we discuss the multivariable functions, $f:\mathbb R^N\to\mathbb R^M$ or $f:\mathbb R^N\to\mathbb C^M$ or $f:\mathbb C^N\to\mathbb C^M$, with general theory, integration results, maximization questions, and basic applications to physics.2024-01-01T00:24:33Z400 pagesTeo Banicahttp://arxiv.org/abs/2601.00903v1A Taxonomy of Magnetostatic Field Lines2025-12-31T19:38:41ZContrary to widespread belief, magnetostatic field lines do not ordinarily form closed loops. Why, then, are they in fact closed for so many familiar examples? What other topologies are possible, and what current configurations generate them?2025-12-31T19:38:41ZAm. J. Phys. 92, 583-592 (2024)Joel FranklinDavid GriffithsDarrell Schroeter10.1119/5.0186335http://arxiv.org/abs/2512.25024v1On Nonlinear Inertial Transformations2025-12-31T18:22:10ZIt is often assumed that the most general transformation between two inertial reference frames is affine linear in their Cartesian coordinates, an assumption which is however not true. We provide a complete derivation of the most general inertial frame transformation, which is indeed nonlinear; along the way, we shall find that the conditions of preserving the Law of Inertia take the form of Schwarzian differential equations, providing perhaps the simplest possible physics setting in which the Schwarzian derivative appears. We then demonstrate that the most general such inertial transformation which further preserves the speed of light in all directions is, however, still affine linear. Physically, this paper may be viewed as a reduction of the number of postulates needed to uniquely specify special relativity by one, as well as a proof that inertial transformations automatically imbue spacetime with a vector space structure, albeit in one higher dimension than might be expected. Mathematically, this paper may be viewed as a derivation of the higher-dimensional analog of the Schwarzian differential equation and its most general solution.2025-12-31T18:22:10Z20 pagesNicholas Agia