https://arxiv.org/api/2zROp59PoNL9rq75cK4M28uzYEA 2026-11-12T03:43:27Z 9693 15 15 http://arxiv.org/abs/2611.12967v1 2026-11-07T14:51:09Z

We present a constrained mixed variational formulation for incremental irreversible thermodynamics. A single augmented action combines a linearized contact-increment penalty, equilibrium and dissipative Fenchel--Young defects, a storage--transport functional, and multipliers enforcing the constitutive increments. Under frozen-coefficient and boundary assumptions, stationarity yields the linearized contact condition, the Tisza relation, the Onsager flux--force law, and the implicit balance equation. An exact-elimination theorem shows that the contact and multiplier fields can be reconstructed algebraically from a solution of the reduced weak balance problem. We also prove off-shell invariance of the equilibrium--storage--multiplier sector under an equilibrium-sector partial Legendre transformation; invariance of the full augmented action is not claimed. For Fourier heat conduction, we derive a weighted drift identity and a per-step energy-drift bound for the energy-representation three-term incremental functional. In one spatial dimension, a small-time-step estimate yields a uniform $H^1$ bound and a discrete $L^2(0,T_f;H^2)$ bound, leading to cumulative $O(δt)$ drift over fixed time intervals. A conservative mixed discontinuous Galerkin (DG0)--Raviart--Thomas (RT0) discretization with fully implicit conductivity $κ(T)=1+T^2$ preserves discrete energy to roundoff. A separate lumped-mass piecewise-linear benchmark reproduces the predicted finite-step drift.

2026-11-07T14:51:09Z 19 pages, 2 figures, 2 tables. Companion paper (Part II) to be submitted Mostafa Rostampour http://arxiv.org/abs/2611.08166v1 2026-11-05T15:25:33Z

A metasurface is an electrically thin interface that controls the phase, amplitude and polarization of a wave, upon reflection or transmission. Printed on a grounded dielectric substrate and spatially modulated across the aperture, it converts a guided surface wave into a radiated leaky wave, a mechanism used in holographic metasurface antennas. Controlling this conversion requires synthesizing a prescribed distribution of admittance tensors, each derived from the homogenization of a subwavelength unit cell. Many numerical and semi-analytical methods have been proposed to relate the geometry of a meta-atom to the tensor it produces. This paper presents, to the author's knowledge, the first analytical model, restricted to elliptical meta-atoms on a uniform lattice. The Galerkin method is applied directly to the geometry of the patches, without spatial meshing. An affine transformation maps any rotated ellipse onto the unit disk, so that a single formulation covers every configuration. A wideband response takes from minutes to tens of minutes with a periodic full-wave solver, while the proposed model evaluates it in a few tens of milliseconds on the same workstation, roughly three orders of magnitude faster. The predicted admittance agrees with a method-of-moments reference up to the fundamental resonance and captures the guided-mode anomaly of the substrate. Beyond the physical insight it brings, the model is a differentiable function of the geometry, which makes the quasi-real-time design of optimized metasurfaces possible.

2026-11-05T15:25:33Z 13 pages, 8 figures, MWE https://zenodo.org/records/23982840 Thomas Fromentèze http://arxiv.org/abs/2606.22444v2 2026-11-05T14:26:01Z

We consider localized oscillations of an Euler--Bernoulli beam on a visco-elastic foundation coupled to a damped discrete oscillator. All system parameters vary slowly and independently in time. For the conservative case, we employ three different analytical approaches: an asymptotic method, a technique based on the adiabatic invariance of the action of a trapped wave, and an analysis of the equivalent Hamiltonian system. All three approaches yield the identical formula for the oscillation amplitude. In the dissipative case, the oscillation amplitude is obtained solely via the asymptotic approach. Finally, we validate our analytical findings against numerical simulations, demonstrating excellent agreement.

2026-06-21T11:40:46Z 15 pages, 1 figure Ekaterina V. Shishkina Serge N. Gavrilov Yulia A. Mochalova http://arxiv.org/abs/2611.08557v1 2026-11-05T13:05:32Z

We present a numerical and conceptual overview of classical scattering under a Lennard-Jones potential. All results were obtained by direct integration of particle trajectories in the two-dimensional plane for varying impact parameters and energies. From these trajectories, we compute deflection functions, identify critical values associated with unstable circular orbits, and visualize non-monotonic behavior in the angular deflection. We construct color maps representing the deflection angle and interaction delay time as functions of energy and impact parameter, and determine the differential cross section from the deflection function, accounting for multi-valued contributions. These results are displayed both as individual plots and as a full color map in the energy-angle plane, providing a detailed picture of the scattering behavior in this central potential.

2026-11-05T13:05:32Z European Journal of Physics 46, 055001 (2025) Tiago Kroetz 10.1088/1361-6404/adecce http://arxiv.org/abs/2611.08545v1 2026-11-05T06:28:15Z

The classification of the motion of a heavy symmetric top when conserved angular momenta are different is studied by considering modern method and Routh's geometrical method. It is shown that Routh's method provides correct classification for four cases; however, it fails in two cases.

2026-11-05T06:28:15Z Vedat Tanriverdi http://arxiv.org/abs/2611.06567v1 2026-11-04T14:30:01Z

A stretched wire driven near its fundamental frequency can leave the plane of the driving force and whirl. At larger amplitudes the whirl becomes modulated, reverses its direction, and becomes chaotic. Three models of this motion are in common use: the geometrically exact string equations; a two-mode model -- the Kirchhoff-Carrier equation with one transverse mode in each plane; and the averaged equations for the slow amplitudes of those two modes. We integrate all three under similar conditions and compare them along the route to chaos, which starts with a Hopf bifurcation of the steady whirl and passes through period doublings to chaotic attractors organized by a Shil'nikov homoclinic orbit. The small parameter of the averaging, the ratio $\varepsilon = c/ω_1$ of the modulation rate to the fundamental frequency, runs from 0.005 to 0.02. Qualitatively the three models agree in the sequence of bifurcations, the coexisting attractors, the return maps and the Lyapunov exponents. Quantitatively, averaging places each local bifurcation $0.7\varepsilon$ to $1.2\varepsilon$ higher in the scaled detuning. The geometrically exact and two-mode models agree with each other to within 0.002 at the local bifurcations for $\varepsilon \le 0.01$. The Shil'nikov ratio, which decides whether chaos accompanies the homoclinic orbit, agrees among the three models to within 1.5% for $\varepsilon \le 0.01$, yet the homoclinic bifurcation itself moves by about $\varepsilon$ at the lower damping and by 6 to 9 times $\varepsilon$ at the higher; the difference is set by how quickly the return of the homoclinic loop changes with detuning.

2026-11-04T14:30:01Z 38 pages, 7 figures, 4 tables. Run data and MATLAB code: doi:10.5281/zenodo.23931253. Submitted to Journal of Sound and Vibration Nicholas B. Tufillaro http://arxiv.org/abs/2504.09369v3 2026-11-04T11:18:07Z

Understanding the energy transfer from wind to waves is an important but complex topic, typically based on phenomenology, on heavy numerics, or on technically challenging analysis, carried out on a case by case basis. Here we show that the approach by Miles, initially proposed for a still and infinitely deep ocean of inviscid water, is in fact generic: it can easily be adapted, as we demonstrate directly from the mathematical structure of the arguments put forward by Miles. We establish simple transformations, which infer wave growth rates in complex hydrodynamic situations directly from those in Miles' conditions, without any adjustable parameters. The corresponding conversion factors are determined from the hydrodynamic water pressure produced by a propagating surface wave, and can be determined without requiring to further analyse wind and air flow. Alternatively, the dispersion relation (in the absence of air andt hus wind) may be used as a starting point. We reproduce a variety of results for different hydrodynamic situations to show how such generalisations can be achieved with surprisingly simple calculations and without any additional numerical effort, which should make the approach interesting for real-life applications.

2025-04-12T23:35:46Z Christophe Chaubet Miguel A. Manna Norbert Kern http://arxiv.org/abs/2611.06354v1 2026-11-04T11:16:30Z

The Johnson-Koplik-Dashen viscous characteristic length $Λ$ and its thermal analogue $Λ'$ introduced by Champoux and Allard govern the leading $O(ω^{-1/2})$ boundary-layer behaviour of fluid-saturated porous media, but omit higher microgeometric effects associated with interface curvature and field gradients. We develop the asymptotic high-frequency expansions of dynamic tortuosity and dynamic compressibility beyond the leading boundary-layer terms. By resolving the oscillatory Stokes and heat conduction problems in the thin boundary-layer limit, we establish a recursive hierarchy, which can be continued to any order, defining successive microgeometric parameters, given by wall integrals. Each order requires transport equations of WKB type across the boundary layer, closed by a non-secularity condition, together with one Neumann problem for the potential displacement flow that the boundary layer induces. Applied to the values fitted on highly absorbing foams, these expressions show that the negative surface parameter is consistent with strong in-parallel disorder of the pore sizes, whereas the large positive third-order term points to strong constrictions or enlargements along part of the flow paths. The thermal parameters reduce to geometrical quantities: the integral mean curvature of the pore walls, a Willmore-type measure of their departure from umbilicity and, at the next order, this measure weighted by the mean curvature. Using the Avellaneda-Torquato relaxation-mode representation, we show that all these parameters are spectral data of the distribution of relaxation times. For isolated sharp edges across which the fluid flows, the singular terms of the formal expansion cancel, and the description persists with apparent, logarithmically varying values of the parameters.

2026-11-04T11:16:30Z 80 pages, 3 figures D. Lafarge A. Bouchendouka Z. E. A. Fellah http://arxiv.org/abs/2611.06243v1 2026-11-04T09:49:43Z

A discrete chain of one-dimensional elements with concentrated elastic stiffness is analyzed to investigate the effect of self-equilibrated dead loads acting at the microscale. Three homogenization models are formulated for a finite chain whose total length is much larger than the unit-cell length. Model (i) homogenizes the elastic properties and the microscopic loading simultaneously, yielding an equivalent rod with homogeneous axial and flexural stiffnesses, an effective prestress state, and a distribution of nonlinear rotational springs. In Models (ii) and (iii), the microforces remain periodically distributed as external loads. Model (ii) has homogeneous axial and flexural stiffnesses, whereas Model (iii) retains piecewise-constant axial stiffness. Model (i) is shown to recover the continuum limit of the fully loaded discrete system and to provide the most accurate, fully homogenized description. Incorporating the microforces into the nonlinear homogenization procedure produces an unconventional prestress and a distributed rotational constraint, including rotational springs with negative tangent stiffness. The nonlinear equilibrium equation of Model (i) admits a closed-form solution in terms of elliptic functions, enabling analysis of large deflections and initial post-buckling behavior of a cantilever. The model predicts tensile and compressive buckling, as well as restabilization of the straight configuration. Finally, combined control of the end load and microforces is explored for soft-robotic actuation. Suitable loading paths allow switching between straight and bent configurations and changing the bifurcation character from supercritical to subcritical.

2026-11-04T09:49:43Z 42 pages, 12 figures J. Mech. Phys. Solids 218 (2027) 106870 Yang Ye Andrea Piccolroaz Davide Bigoni 10.1016/j.jmps.2026.106870 http://arxiv.org/abs/2610.24340v3 2026-11-04T03:57:34Z

We derive a sharp upper bound on the quasi-steady temperature rise of a sensor of arbitrary shape and known thermometric volume $V_\mathrm{s}$, placed anywhere inside a region enclosed by an isothermal reference surface. The bound also requires the maximum net heat power $\dot Q_{\scriptscriptstyle \mathcal S \subseteq \mathcal{V}_{\mathrm r}}^{\max}$ crossing any closed surface within the region and a lower bound on its thermal conductivity $κ_{\scriptscriptstyle{\mathcal{V}_{\mathrm r}}}$. It is otherwise independent of the heat-source distribution, domain shape, and source-ensor distance. For $\dot Q_{\scriptscriptstyle \mathcal S \subseteq \mathcal{V}_{\mathrm r}}^{\max}=50~\mathrm{pW}$, $κ_{\scriptscriptstyle{\mathcal{V}_{\mathrm r}}} =0.1~\mathrm{W\,m^{-1}K^{-1}}$, and $V_{\mathrm s}$ equal to the volume of a $60~\mathrm{nm}$-diameter sphere, the theorem permits a maximum temperature rise of approximately $2~\mathrm{mK}$. Neither source localization nor uncertain source--sensor separation can therefore account for reported kelvin-scale intracellular readings under steady-state heat conduction. The result applies to sensors based on nanodiamonds, upconversion nanoparticles, fluorescent polymer beads, and core-shell quantum dots.

2026-10-17T00:17:04Z 9 pages, 3 figures Clarified heat-power definition, notation and the title. Main results are unchanged Taras Plakhotnik http://arxiv.org/abs/2606.29189v3 2026-11-03T23:05:21Z

We report the first continuous families of stable, ballistic, prograde cycler orbits in the circular restricted three-body problem: periodic trajectories that alternately undergo temporary capture and orbit each primary. We construct continuous families of symmetric cyclers from intersections of the stable and unstable manifold tubes of the $L_1$ Lyapunov orbit and exhibit stable examples across more than two orders of magnitude in mass ratio, from the Sun-Jupiter regime to the equal-mass limit. Linear stability separates naturally into planar and out-of-plane components. A planar-stable branch of every computed family is created simultaneously with a hyperbolic branch in a saddle-center bifurcation of the return map at the family's maximal Jacobi constant, while out-of-plane instability occurs only through isolated parametric resonances. Every computed family contains a subfamily that is linearly stable to both planar and out-of-plane perturbations. These stable cyclers persist into the full three-body problem for sufficiently small third mass. We conjecture that saddle-center birth is universal among cycler families, suggesting that stable cyclers are a generic feature of three-body dynamics.

2026-06-28T04:23:16Z 6 pages, 3 figures; Accepted in Physical Review E (Letter) Shane D. Ross Michael Roberts-Tsoukkas 10.1103/6jy8-bls1 http://arxiv.org/abs/2611.05125v1 2026-11-03T16:11:40Z

Linear and nonlinear mechanical structures with closely spaced modes and non-classical (nonproportional) damping distribution are susceptible to modal interactions with energy exchanges between modes. In this work we analyze these interactions in a two-degree-of-freedom (2 DoF) coupled oscillator subject to impulse excitation, utilizing action-angle variables and the method of multiple scales. To show the basic steps of the methodology we start from the linear system, then proceed to analyze modal interactions in the system with strongly nonlinear cubic stiffness nonlinearity. In contrast to the linear case, once the dynamics of the nonlinear system is captured in 1:1 resonance, strongly nonlinear modal interactions occur depending on energy. These regimes as well as attraction to capture, 1:1 capture and escape from capture are analyzed in detail. Our analytical study determines the ranges of parameter values for which nonlinear modal interactions due to resonance capture occur. The analytical predictions are fully verified by direct numerical simulations of the governing equations of motion. Possible extensions of the present work to systems of oscillators with more DoF and other types of dissipative elements, e.g., friction or hysteresis are discussed.

2026-11-03T16:11:40Z 23 pages, 6 Figures, supplemental material in https://github.com/csan94/2DoF_nonlinear_oscillator C. A. Hubay T. Kalmar-Nagy L. Bergman A. F. Vakakis http://arxiv.org/abs/2504.16816v17 2026-11-03T15:57:16Z

We present an alternative derivation of exact solutions for pendulum-like systems across all dynamical regimes using a standard technique in an undergraduate mathematical physics course: the Cauchy residue theorem, entirely independent from the traditional Jacobi elliptic functions. The solutions are exact in both the time and frequency domains, providing continuous trajectories and precise frequency decompositions. Pendulum-like dynamics is a foundational model across many areas of physics, underlying systems ranging from classical nonlinear oscillators to superconducting qubits and cold-atom tunneling platforms. While its time-domain solutions are well-known in terms of Jacobi elliptic functions, its obscured frequency-domain solutions have led a large body of theoretical and experimental work to develop and apply approximate methods when studying its spectral behavior. We discover that all regimes arise from a single spectral kernel, with parity selection distinguishing the periodic motions and the separatrix representing their discrete-to-continuum limit. Regime changes thus correspond to symmetry-driven reorganizations in frequency space rather than changes in the underlying spectral structure, with the stopping trajectory representing the continuum limit. By completely bypassing the traditional Jacobi elliptic functions, and relying on the symmetrical structure of the complex time plane, the derivation shows that the symmetrical spectral structure is not merely an algebraic artifacts of elliptic integrals, but fundamentally connected to the dynamical symmetries of the system. The derivation presented here not only serves as a powerful pedagogical exercise for this long-standing physics problem, but also reveals a highly symmetrical spectral organization in nonlinear dynamics.

2025-04-23T15:35:11Z submitted to European Journal of Physics Teepanis Chachiyo http://arxiv.org/abs/2607.07731v4 2026-11-03T15:21:44Z

A symmetric quartic potential is a physics model with expansive applications, ranging from broadband energy harvesters, quantum tunneling in molecules and the early universe, to torque-free spacecraft rotation. Its rich dynamics have been traditionally classified into regimes and expressed as disjointed time-domain solutions. Here we build a taxonomy for this broad class of motions and discover that their regimes exhibit a symmetrical spectral structure: they share a fundamental clock, obey parity selection, and dissolve into the separatrix through a discrete-to-continuum transition. Applied to the famous Dzhanibekov effect where a rotating body periodically undergoes rapid 180-degree flips in its attitude, the taxonomy reveals its spectral anatomy. The three principal-axis rotations share a common clock while occupying distinct parity channels, with stable-axis branches exchanging DC bias across the separatrix. We discuss a case study where the three spectral pillars: clock, parity, and continuum, survive the Wick rotation from real-time into imaginary-time kinematics.

2026-07-07T01:40:45Z Fix typos and add notes that detailed derivation for the Wick rotation is in the supplementary material Teepanis Chachiyo http://arxiv.org/abs/2611.09991v1 2026-11-03T00:32:46Z

The scaling of electrical conductance with the number of nanopores, $N$, in an array is of fundamental importance for applications in membrane separation and ion transport across biological membranes, and has been the subject of longstanding disagreement in the field. Combining finite element calculations with theory, we resolve this disagreement for pores with negligible surface charge by showing that two previously conflicting predictions are each correct in their own limiting reservoir geometry: cuboidal reservoirs commensurate with the interpore spacing, for which the conductance scales linearly with $N$, and infinite reservoirs, for which the scaling is sublinear in $N$ for closely spaced pores. We show the transition between these limits with increasing reservoir size and, for infinite reservoirs, we show that a simple analytical model from electrical contact theory is mathematically equivalent to an existing point-charge capacitance model for nanopore arrays and validate its applicability against finite element and method-of-moments calculations. Using this model, we derive a characteristic coupling length, $\ell_\mathrm{c,95}$, the interpore spacing at which the array conductance reaches $95\%$ of that of the same number of independent pores. $\ell_\mathrm{c,95}$ scales linearly with pore diameter $d$, and grows with $N$ as $\sim\log N$ for linear arrays and $\sim\sqrt{N}$ for square arrays, so that pore coupling persists to surprisingly large separations in large arrays. Our work provides a general framework for predicting nanopore array conductance as a function of pore arrangement and reservoir geometry, of importance to nanofluidics research and the targeted design of functional devices.

2026-11-03T00:32:46Z Jacob Bair Zachery Gottshall Matthias Kuehne