https://arxiv.org/api/aLK3Mu3+dloRyx1EpXJHGkinLsI 2026-06-21T22:00:08Z 9445 1080 15 http://arxiv.org/abs/2406.17799v1 2024-06-18T18:15:35Z

Vibration attenuation has played a crucial role in engineering structure, wherein metamaterials have found escalated usage. These structures can be cleverly built to be lightweight and have negative mass properties, which can attenuate waves at specific frequency bands. The first part studies wave propagation in meta-beam with coupled acoustic black holes and local resonators, whereas the second part discusses multi-stable nonlinear oscillators in a 1D metamaterial chain.

2024-06-18T18:15:35Z Master's thesis Arghya Mondal http://arxiv.org/abs/2406.12654v1 2024-06-18T14:25:17Z

Fault ruptures of regular earthquakes typically grow in a self-similar manner, where the radiated energy is proportional to the seismic moment. Their proportionality factor, termed as scaled energy, has been conventionally described as the ratio of stress drop to stiffness. By analyzing the self-similar circular crack model by Sato and Hirasawa (1973), Matsu'ura (2024) found a correction prefactor for this theoretical representation of the scaled energy, the cubed ratio of the rupture speed to the S-wave speed. The stress drop times the cubed rupture speed is the scaling prefactor of the self-similar seismic moment, and thus, Matsu'ura's solution tells that the seismic moment rate is determined by the scaled energy in the self-similar rupture growth. We rearrange the properties of the self-similar solution from this perspective, apply this Sato-Hirasawa-Matsu'ura relation to a series of seismic events thought to be self-similar, and estimate their source parameters and scaled energies. According to our estimation using the above self-similarity model, seismologically detected low-frequency and very-low-frequency earthquakes have a common scaled energy, while geodetically detectable slow slip events indicate multiple modes with different scaled energies. Meanwhile, for very-low-frequency earthquakes and tectonic tremors, the seismic moments were significantly smaller than expected for self-similar ruptures despite their moments being proportional to cubed duration values. It keeps alive a hitherto less contemplated possibility: the proportionality of the moment to cubed duration may not be a manifestation of the self-similarity for slow earthquake rupture growth.

2024-06-18T14:25:17Z 21 pages, 1 figure Dye SK Sato http://arxiv.org/abs/2406.12948v1 2024-06-18T12:07:59Z

The aim of this project was to develop a new Reservoir Computer implementation, based on a chaotic Chua circuit. In addition to suitable classification and regression benchmarks, the Reservoir Computer was applied to Post-Quantum Cryptography, with its suitability for this application investigated and assessed. The cryptographic algorithm utilised was the Learning with Errors problem, for both encryption and decryption. To achieve this, the Chua circuit was characterised, in simulation, and by physical circuit testing. The Reservoir Computer was designed and implemented using the results of the characterisation. As part of this development, noise was considered and mitigated. The benchmarks demonstrate that the Reservoir Computer can achieve current literature benchmarks with low error. However, the results with Learning with Errors suggest that a Chua-based Reservoir Computer is not sufficiently complex to tackle the high non-linearity in Post-Quantum Cryptography. Future work would involve researching the use of different combinations of multiple Chua Reservoir Computers in larger neural network architectures. Such architectures may produce the required high-dimensional behaviour to achieve the Learning with Errors problem. This project is believed to be only the second instance of a Chua-based Reservoir Computer in academia, and it is the first to be applied to challenging real-world tasks such as Post-Quantum Cryptography. It is also original by its investigation of hitherto unexplored parameters, and their impact on performance. It demonstrates a proof-of-concept for a mass-producible, inexpensive, low-power consumption hardware neural network. It also enables the next stages in research to occur, paving the road for using Chua-based Reservoir Computers across various applications.

2024-06-18T12:07:59Z 72 pages, 62 figures, Master of Engineering final project report Matthew John Cossins Sendy Phang http://arxiv.org/abs/2406.12306v1 2024-06-18T06:26:49Z

Recently, large-scale trapped ion systems have been realized in experiments for quantum simulation and quantum computation. They are the simplest systems for dynamical stability and parametric resonance. In this model, the Mathieu equation plays the most fundamental role for us to understand the stability and instability of a single ion. In this work, we investigate the dynamics of trapped ions with the Coulomb interaction based on the Hamiltonian equation. We show that the many-body interaction will not influence the phase diagram for instability. Then, the dynamics of this model in the large damping limit will also be analytically calculated using few trapped ions. Furthermore, we find that in the presence of modulation, synchronization dynamics can be observed, showing an exchange of velocities between distant ions on the left side and on the right side of the trap. These dynamics resemble to that of the exchange of velocities in Newton's cradle for the collision of balls at the same time. These dynamics are independent of their initial conditions and the number of ions. As a unique feature of the interacting Mathieu equation, we hope this behavior, which leads to a quasi-periodic solution, can be measured in current experimental systems. Finally, we have also discussed the effect of anharmonic trapping potential, showing the desynchronization during the collision process. It is hopped that the dynamics in this many-body Mathieu equation with damping may find applications in quantum simulations. This model may also find interesting applications in dynamics systems as a pure mathematical problem, which may be beyond the results in the Floquet theorem.

2024-06-18T06:26:49Z 15 pages, 14 figures Asma Benbouza Xiaoshui Lin Jin Ming Cui Ming Gong http://arxiv.org/abs/2303.05460v2 2024-06-17T13:33:56Z

This paper addresses the ill-posedness of the classical Rayleigh variational model of conducting charged liquid drops by incorporating the discreteness of the elementary charges. Introducing the model that describes two immiscible fluids with the same dielectric constant, with a drop of one fluid containing a fixed number of elementary charges together with their solvation spheres, we interpret the equilibrium shape of the drop as a global minimizer of the sum of its surface energy and the electrostatic repulsive energy between the charges under fixed drop volume. For all model parameters, we establish existence of generalized minimizers that consist of at most a finite number of components ``at infinity''. We also give several existence and non-existence results for classical minimizers consisting of only a single component. In particular, we identify an asymptotically sharp threshold for the number of charges to yield existence of minimizers in a regime corresponding to macroscopically large drops containing a large number of charges. The obtained non-trivial threshold is significantly below the corresponding threshold for the Rayleigh model, consistently with the ill-posedness of the latter and demonstrating a particular regularizing effect of the charge discreteness. However, when a minimizer does exist in this regime, it approaches a ball with the charge uniformly distributed on the surface as the number of charges goes to infinity, just as in the Rayleigh model. Finally, we provide an explicit solution for the problem with two charges and a macroscopically large drop.

2023-03-09T18:04:19Z 56 pages, 5 figures Arch. Ration. Mech. Anal. 248, 76 (2024) Cyrill B. Muratov Matteo Novaga Philip Zaleski 10.1007/s00205-024-02012-9 http://arxiv.org/abs/2406.09871v1 2024-06-14T09:33:01Z

In this paper, we employ a combination of analytical and numerical techniques to investigate the dynamics of lattice envelope vector soliton solutions propagating within a one-dimensional chain of flexible mechanical metamaterial. To model the system, we formulate discrete equations that describe the longitudinal and rotational displacements of each individual rigid unit mass using a lump element approach. By applying the multiple-scales method in the context of a semi-discrete approximation, we derive an effective nonlinear Schrödinger equation that characterizes the evolution of rotational and slowly varying envelope waves from the aforementioned discrete motion equations. We thus show that this flexible mechanical metamaterial chain supports envelope vector solitons where the rotational component has the form of either a bright or a dark soliton. In addition, due to nonlinear coupling, the longitudinal displacement displays kink-like profiles thus forming the 2-components vector soliton. These findings, which include specific vector envelope solutions, enrich our knowledge on the nonlinear wave solutions supported by flexible mechanical metamaterials and open new possibilities for the control of nonlinear waves and vibrations.

2024-06-14T09:33:01Z Antoine Demiquel Vassos Achilleos Georgios Theocharis Vincent Tournat http://arxiv.org/abs/2406.11606v1 2024-06-14T09:11:41Z

We study experimentally the manifestation of non-Weyl graph behavior in open systems using microwave networks. For this a coupling variation to the network is necessary, which was out of reach till now. The coupling to the environment is changed by indirectly varying the boundary condition at the coupling vertex from Dirichlet to Neumann using a dangling bond with variable length attached the coupling vertex. A transformation of equal length spectra to equal reflection phase spectra of the dangling bond allows to create spectra with different fixed coupling strength. This allows to follow the resonances in the complex plane as a function of the coupling. While going from closed (Dirichlet) to fully open (Neumann) graph we see resonances escaping via a superradiant transition leading to non-Weyl behavior if the coupling to the outside is balanced. The open tetrahedral graph displays a rich parametric dynamic of the resonances in the complex plane presenting loops, regions of connected resonances and resonances approaching infinite imaginary parts.

2024-06-14T09:11:41Z 6 pages, 3 figures Junjie Lu Tobias Hofmann Hans-Jürgen Stöckmann Ulrich Kuhl http://arxiv.org/abs/2312.04396v2 2024-06-13T14:09:54Z

We study the amount of backscattering of Valley Hall modes in a classical topological insulator. In reciprocal systems, the conservation of the valley index has been argued to be at the root of the high-transmission of Valley Hall modes, observed in many experimental realisations. Here, we reconsider this hypothesis by quantitatively analysing the canonical scattering problem of interface Valley Hall modes impinging on sharp bends which may or may not conserve the valley index. We consider a tight binding model of graphene ribbons with an interface and compute the reflection and transmission coefficients using a transfer matrix formalism. We find that, in all configurations considered, the transmission of Valley Hall modes is close to being maximal, even in cases where the valley index is not conserved. Hence there appears to be no correlation between valley conservation and good transmission. Our results serve as a reference case for the design of Valley Hall type metamaterial.

2023-12-07T16:08:39Z 47 pages, 25 figures, 2 extra appendices, modified figures/introduction/conclusion, references added Proc. A (2024) 480 (2300): 20230905 Theo Torres Cédric Bellis Régis Cottereau Antonin Coutant 10.1098/rspa.2023.0905 http://arxiv.org/abs/2406.06336v2 2024-06-12T20:55:15Z

We discuss here the direct and inverse problems for wave propagation in a waveguide with rough internal surface and arbitrary mean shape. The high degree of multiple scattering inside the waveguide poses significant challenges both for the forward computation and for the recovery of the surface profile, and raises important questions about scattering cross-sections. This paper falls into two parts corresponding to these issues. We first apply Left-Right (L-R) operator splitting to calculate the scattered fields in 2- and 3-dimensional waveguides. Using this we illustrate the scattered fields and the effect of surface roughness. In the second part we formulate an algorithm for surface recovery from field measurements along the waveguide axis, which generalises recent work on surfaces in 2 dimensions. This method utilizes forward scattering assumptions in effect by formulating an integral equation in the unknown surface field, treated as a function of the surface. Although discussed in the context of waveguides, the formulae are given in a form applicable to a variety of geometries, with coefficients which will depend on and be determined by each specific application.

2024-06-10T14:54:32Z Mark Spivack Orsola Rath Spivack http://arxiv.org/abs/2406.10277v1 2024-06-12T01:45:39Z

Tellegen medium has long been a topic of debate, with its existence being contested over several decades. It was first proposed by Tellegen in 1948 and is characterized by a real-valued cross coupling between electric and magnetic responses, distinguishing it from the well-known chiral medium that has imaginary coupling coefficients. Significantly, Tellegen responses are closely linked to axion dynamics, an extensively studied subject in condensed matter physics. Here, we report the realization of Tellegen metamaterials in the microwave region through a judicious combination of subwavelength metallic resonators, gyromagnetic materials, and permanent magnet discs. We observe the key signature of the Tellegen response, i.e. a Kerr rotation for reflected wave, while the polarization remains the same in the transmission direction. The retrieved effective Tellegen parameter is several orders of magnitude greater than that of natural materials. Our work opens door to a variety of nonreciprocal photonic devices and may provide a platform for studying axion physics.

2024-06-12T01:45:39Z 19 pages, 4 figures Qingdong Yang Xinhua Wen Zhongfu Li Oubo You Shuang Zhang http://arxiv.org/abs/2104.12650v2 2024-06-11T21:06:10Z

An approach is presented for the inversion of simulated and experimental in-plane, co-polarized light scattering data in p and s polarization to obtain the normalized surface-height autocorrelation function and the rms-roughness of a two-dimensional randomly rough metal surface. The approach is based on an expression, obtained on the basis of second-order phase perturbation theory, for the contribution to the mean differential reflection coefficient from the light scattered diffusely by the rough surface. The inversion scheme is validated by using several sets of computer generated scattering data for rough silver surfaces defined by Gaussian surface height correlation functions. The reconstructions obtained by this approach are found to be rather accurate for weakly rough surfaces illuminated by p- and s-polarized incident light; this is also true in cases where the contributions to the input data from multiple scattering of surface plasmon polaritons is not insignificant. Finally, the inversion scheme is applied to experimental scattering data obtained for characterized two-dimensional randomly rough gold surfaces, and the results obtained in this way, compare favorably to what is obtained by directly analyzing the surface morphology. Such results testify to the attractiveness of the computationally efficient inversion scheme that we propose.

2021-04-26T15:22:40Z 25 pages, 11 figures I. Simonsen J. B. Kryvi A. A. Maradudin http://arxiv.org/abs/2406.07462v1 2024-06-11T17:08:53Z

Extremal elastic materials here refer to a specific class of elastic materials whose elastic matrices exhibit one or more zero eigenvalues, resulting in soft deformation modes that, in principle, cost no energy. They can be approximated through artificially designed solid microstructures. Extremal elastic materials have exotic bulk wave properties unavailable with conventional solids due to the soft modes, offering unprecedented opportunities for manipulating bulk waves, e.g., acting as phonon polarizers for elastic waves or invisibility cloaks for underwater acoustic waves. Despite their potential, Rayleigh surface waves, crucially linked to bulk wave behaviors of such extremal elastic materials, have largely remained unexplored so far. In this paper, we theoretically investigate the propagation of Rayleigh waves in extremal elastic materials based on continuum theory and verify our findings with designed microstructure metamaterials based on pantographic structures. Dispersion relations and polarizations of Rayleigh waves in extremal elastic materials are derived, and the impact of higher order gradient effects is also investigated by using strain gradient theory. This study provides a continuum model for exploring surface waves in extremal elastic materials and may stimulate applications of extremal elastic materials for controlling surface waves.

2024-06-11T17:08:53Z 8 figures J. Mech. Phys. Solids, 193(105842), 2024 Yu Wei Yi Chen Wen Cheng Xiaoning Liu Gengkai Hu 10.1016/j.jmps.2024.105842 http://arxiv.org/abs/2305.01725v2 2024-06-11T13:41:14Z

We present the foundations of a projective geometric theory of elasticity, as well as outline a few possible application possibilities. We give the description of the Cauchy stress and infinitesimal strain tensors compatible with coordinate description of projective geometry and derive their transformation rules under projective transformations. We identify these tensors with generalized conics and quadrics; which shows that the material law cannot be directly given as a correlation, and that the absence of normal stresses and normal strains are projective invariants. The transformation of the graph of the Airy stress function is given in a point-wise projective three dimensional way, which preserves Pucher's equation corresponding to a unidirectionally loaded membrane shell. The paper closes with an example considering tapered beams, showing how to find a statically possible stress distribution in trapezioidal plates relying on the Euler-Bernoulli beam theory for rectangular beams.

2023-05-02T18:50:11Z Tamás Baranyai http://arxiv.org/abs/2406.08515v1 2024-06-11T08:57:19Z

Topological wave structures, such as vortices and skyrmions, appear in a variety of quantum and classical wave fields, including optics and acoustics. In particular, optical vortices have found numerous applications ranging from quantum information to astrophysics. Furthermore, both optical and acoustic structured waves are crucial for manipulation of small particles, from atoms to macroscopic biological objects. Here we report on the controllable generation of topological structures -- wave vortices, skyrmions, and polarization Möbius strips -- in interfering gravity water waves. Most importantly, we demonstrate efficient manipulation of subwavelength and wavelength-order floating particles with topologically structured water waves. This includes trapping of the particles in the high-intensity field zones, as well as controllable orbital and spinning motions due to the orbital and spin angular momenta of water waves. Our results reveal the water-wave counterpart of optical and acoustic manipulations, which paves the avenue for applications in hydrodynamics and microfluidics.

2024-06-11T08:57:19Z Nature 638, 394 (2025) Bo Wang Zhiyuan Che Cheng Cheng Caili Tong Lei Shi Yijie Shen Konstantin Y. Bliokh Jian Zi 10.1038/s41586-024-08384-y http://arxiv.org/abs/2402.12853v2 2024-06-10T12:06:54Z

Classical Faraday's law on electromagnetic induction states that a change of magnetic field through a coil wire induces a current in the wire. A mechanical analogue of the Lorentz force, induced by a magnetic field on an electric charge, is the gyroscopic force. Here, we demonstrate a mechanical analogy with a chiral elastic waveguide subjected to gyroscopic forcing. We study waves in an infinite mass-spring `gyrocore helix', which consists of a helix and a central line (gyroscopic elastic core). The helicoidal geometric chirality is considered in conjunction with a physical chirality, induced by gyroscopic forces. It is shown that the interplay between these two chiral inputs leads to the breaking of symmetry of the associated dispersion diagram, resulting in a unidirectional waveform with the direction of propagation being tunable through the gyricity.

2024-02-20T09:33:09Z Total Words:2412 Headers:6 Math Inline:90 Math Display:10 Finn J. P. Allison Ozgur Selsil Stewart G. Haslinger Alexander B. Movchan