https://arxiv.org/api/tKw+s/5HPClcPufb3j4fLK4SXA0 2026-06-21T19:51:50Z 9445 1050 15 http://arxiv.org/abs/2407.06717v1 2024-07-09T09:44:51Z

The explanation of the basic acoustic properties of crystals requires a recognition of the acoustic axes. To derive the acoustic axes in a given material, one requires both a workable method and the necessary and sufficient criteria for the existence of the acoustic axes in a partial propagation direction. We apply the reduced form of the acoustic tensor to the acoustic axis conditions in the present work. Using this tensor, we obtain in a compact form, allowing for qualitative analysis, the necessary and sufficient criteria for the existence of the acoustic axis. Furthermore, the well-known Khatkevich criteria and their variants are recast in terms of the reduced acoustic tensor. This paper's primary input is an alternate minimal polynomial-based system of acoustic axes conditions. In this approach, we derive an additional characteristic of acoustic axes: the directions in which the minimal polynomial of the third order is reduced to that of the second order. Next, we offer a general solution to the second-order minimum polynomial equation, that utilizes a scalar and a unit vector for defining the acoustic tensor along the acoustic axis. It is shown that the scalar matches the eigenvalue of the reduced acoustic tensor, and the vector corresponds to the polarization into the single eigenvalue direction. We use the minimal polynomial construction to demonstrate the equivalence of different acoustic axis criteria. We demonstrate the applicability of this approach to actual computations of the acoustic axes and their fundamental properties (phase speeds and polarizations) for high symmetry cases, such as isotropic materials and RTHC crystals.

2024-07-09T09:44:51Z Yakov Itin http://arxiv.org/abs/2209.04902v7 2024-07-09T02:45:59Z

Putting several hard balls into a two-dimensional bowl can form a very basic two-dimensional model of hard-ball system. When the two-dimensional bowl has a parallel-rotation at a uniform speed around a center, when the number of balls is small, the direction of motion of the small balls in the two-dimensional bowl is consistent with that of the two-dimensional bowl; However, when we increase the number of balls one by one, the two will seem to show the opposite movement trend. We analyze this problem comprehensively through physical modeling and inspire readers to think about the significance of the model for analyzing complex physical problems. Finally, because this article involves many aspects of knowledge, college physics teachers can choose the whole problem or part of the problem to introduce it into the classroom.

2022-09-11T16:46:12Z The theory needed further discussion T. Z. Lin http://arxiv.org/abs/2407.09568v1 2024-07-08T16:20:45Z

In a recent Note (Am. J. Phys. 92:397, 2024; arXiv:2309.10826), Vallejo and Bove provide a physical argument based nominally on the second law of thermodynamics as a way of resolving the mathematical question appearing in the title. A remarkable aspect of their argument is that it does not depend on the numerical value of $π$, because $e^{x} \ge x^{e}$ for all positive $x$, with equality occurring only when $x = e$. Moreover, their argument does not depend on the validity of the second law but is rather a limited proof of it for this particular case.

2024-07-08T16:20:45Z 5 pages, 1 figure, accepted for publication by Am. J. Phys., comment on arXiv:2309.10826 Roderick M. Macrae http://arxiv.org/abs/2306.08837v3 2024-07-08T06:51:58Z

In this paper, we examine the role of the Jacobi last multiplier in the context of two-dimensional oscillators. We first consider two-dimensional unit-mass oscillators admitting a separable Hamiltonian description, i.e., $H = H_1 + H_2$, where $H_1$ and $H_2$ are the Hamiltonians of two one-dimensional unit-mass oscillators; it is shown that there exists a third functionally-independent first integral $Θ$, thereby ensuring superintegrablility. Various examples are explicitly worked out. We then consider position-dependent-mass oscillators and the Bateman pair, where the latter consists of a pair of dissipative linear oscillators. Quite remarkably, the Bateman pair is found to be superintegrable, despite admitting a Hamiltonian which cannot be separated into those of two isolated (non-interacting) one-dimensional oscillators.

2023-06-15T03:47:58Z v1: Preliminary version, comments are welcome; v2: Revised version with some new examples and few errors corrected; V3: To appear in Pramana Pramana 98, 101 (2024) Akash Sinha Aritra Ghosh 10.1007/s12043-024-02786-3 http://arxiv.org/abs/2403.18801v2 2024-07-08T05:40:05Z

Time and again, non-conventional forms of Lagrangians with non-quadratic velocity dependence have found attention in the literature. For one thing, such Lagrangians have deep connections with several aspects of nonlinear dynamics including specifically the types of the Liénard class; for another, very often the problem of their quantization opens up multiple branches of the corresponding Hamiltonians, ending up with the presence of singularities in the associated eigenfunctions. In this article, we furnish a brief review of the classical theory of such Lagrangians and the associated branched Hamiltonians, starting with the example of Liénard-type systems. We then take up other cases where the Lagrangians depend upon the velocity with powers greater than two while still having a tractable mathematical structure, while also describing the associated branched Hamiltonians for such systems. For various examples, we emphasize upon the emergence of the notion of momentum-dependent mass in the theory of branched Hamiltonians.

2024-03-27T17:48:54Z v1: Preliminary version, comments are welcome; v2: Published in Symmetry Symmetry 16, 860 (2024) Bijan Bagchi Aritra Ghosh Miloslav Znojil 10.3390/sym16070860 http://arxiv.org/abs/2407.04894v1 2024-07-05T23:40:20Z

Cutting-edge smart materials are transforming the domains of soft robotics, actuators, and sensors by harnessing diverse non-mechanical stimuli, such as electric and magnetic fields. Accurately modelling their physical behaviour necessitates an understanding of the complex interactions between the structural deformation and the fields in the surrounding medium. For thin shell structures, this challenge is addressed by developing a shell model that effectively incorporates the three-dimensional field it is embedded in by appropriately accounting for the relevant boundary conditions. This study presents a model for the nonlinear deformation of thin hyperelastic shells, incorporating Kirchhoff-Love assumptions and a rigorous variational approach. The shell theory is derived from 3D nonlinear elasticity by dimension reduction while preserving the boundary conditions at the top and bottom surfaces of the shell. Consequently, unlike classical shell theories, this approach can distinguish between pressure loads applied at the top and bottom surfaces, and delivers a platform to include multi-physics coupling. Numerical examples are presented to illustrate the theory and provide a physical interpretation of the novel mechanical variables of the model.

2024-07-05T23:40:20Z arXiv admin note: text overlap with arXiv:2308.12300 Abhishek Ghosh Andrew McBride Zhaowei Liu Luca Heltai Paul Steinmann Prashant Saxena http://arxiv.org/abs/2407.04319v1 2024-07-05T07:42:24Z

Soft lubrication has been shown to drastically affect the mobility of an object immersed in a viscous fluid in the vicinity of a purely elastic wall. In this theoretical study, we develop a minimal model incorporating viscoelasticity, carrying out a perturbation analysis in both the elastic deformation of the wall and its viscous damping. Our approach reveals the singular-perturbation nature of viscoelasticity to soft lubrication. Numerical resolution of the resulting non-linear, singular and coupled equations of motion reveals peculiar effects of viscoelasticity on confined colloidal mobility, opening the way towards the description of complex migration scenarios near realistic polymeric substrates and biological membranes.

2024-07-05T07:42:24Z Bharti Bharti UiO, LOMA Quentin Ferreira LOMA Aditya Jha LOMA Andreas Carlson UiO David S. Dean LOMA Yacine Amarouchene LOMA Tak Shing Chan UiO Thomas Salez LOMA http://arxiv.org/abs/2406.00208v2 2024-07-04T01:47:37Z

The quest to reveal the physical essence of the infinitely many symmetries and conservation laws that are intrinsic to integrable systems has historically posed a significant challenge at the confluence of physics and mathematics. This scholarly investigation delves into five open problems related to these boundless symmetries within integrable systems by scrutinizing their multi-wave solutions, employing a fresh analytical methodology. For a specified integrable system, there exist various categories of $n$-wave solutions. Each sub-wave comprising the $n$-wave solution may possess free parameters, including center, width, and periodic parameters. It is evident that these solutions are translation invariant with respect to all these free parameters. We postulate that the entirety of the recognized infinite symmetries merely constitute linear combinations of these finite wave parameter translation symmetries. The conjecture intimates that the currently known infinitely many symmetries are not exhaustive, and an indeterminate number of symmetries remain to be discovered. This conjecture further indicates that by imposing an infinite array of symmetry constraints, it becomes feasible to derive exact multi-wave solutions. By considering the renowned KdV equation and the Burgers equation as simple examples, the conjecture is substantiated for the $n$-soliton solutions. It is unequivocal that any linear combination of the wave parameter translation symmetries retains its status as a symmetry associated with the particular solution. This observation suggests that by introducing a ren-variable and a ren-symmetric derivative which serve as generalizations of the Grassmann variable and the super derivative, it may be feasible to unify classical integrable systems, supersymmetric integrable systems, and ren-symmetric integrable systems within a cohesive hierarchical framework.

2024-05-31T21:46:02Z Mathematics 2024, 12, 3224 S. Y. Lou 10.3390/math12203224 http://arxiv.org/abs/2312.02271v2 2024-07-03T14:40:25Z

We study the $N$ fracton problem in classical mechanics, with fractons defined as point particles that conserve multipole moments up to a given order. We find that the nonlinear Machian dynamics of the fractons is characterized by late-time attractors in position-velocity space for all $N$, despite the absence of attractors in phase space dictated by Liouville's theorem. These attractors violate ergodicity and lead to non-equilibrium steady states, which always break translational symmetry, even in spatial dimensions where the Hohenberg-Mermin-Wagner-Coleman theorem for equilibrium systems forbids such breaking. While a full understanding of the many-body nonlinear problem is a formidable and incomplete task, we provide a conceptual understanding of our results using an adiabatic approximation for the late-time trajectories and an analogy with the idea of `order-by-disorder' borrowed from equilibrium statistical mechanics. Altogether, these fracton systems host a new paradigm for Hamiltonian dynamics and non-equilibrium many-body physics.

2023-12-04T19:00:03Z 12 pages, 11 figures, v2: minor changes, close to published version Phys. Rev. B 110, 024305 (2024) Abhishodh Prakash Ylias Sadki S. L. Sondhi 10.1103/PhysRevB.110.024305 http://arxiv.org/abs/2407.02951v1 2024-07-03T09:42:12Z

Lato-lato, a pendulum-based toy gaining popularity in Indonesian playgrounds, has sparked interest with competitions centered around maintaining its oscillatory motion. While some find it easy to play, the challenge lies in sustaining the oscillation, particularly in maintaining both "up and down collisions." Through a Newtonian dynamics numerical analysis using Python (code by ChatGPT), this study identifies two equilibrium phases - phase 1, characterized by normal pendulum motion, and phase 2, the double collision mode - by using the driven oscillation model. In addition, further analysis and discussion are done using the obtained numeric data. The difficulty in remaining in phase 2 highlights the intricate hand-eye coordination required, shedding light on the toy's appeal and the skill it demands.

2024-07-03T09:42:12Z 17 pages, 8 figures 2024 Eur. J. Phys. 45 045007 Fansen Candra Zainul Abidin 10.1088/1361-6404/ad523a http://arxiv.org/abs/2407.02897v1 2024-07-03T08:18:00Z

The bifurcation problem of a circular Euler-Bernoulli rod subject to a uniform radial force distribution is investigated under three distinct loading conditions: (i.) hydrostatic pressure, (ii.) centrally-directed, and (iii.) dead load. Previous studies on this apparently 'familiar' structural problem have yielded controversial results, necessitating a comprehensive clarification. This study shows that results previously labelled as 'correct' or 'wrong' simply refer to different external constraints, whose presence becomes necessary only for the two latter loads, (ii.) and (iii.). Moreover, the paper presents the first experimental realization of a circular rod subjected to centrally-directed loads. The experimental findings align with the theoretical predictions and show the exploitation of a new type of load acting on a continuous structural element. The feasibility of this load is demonstrated through the use of inextensible cables and opens the way to applications in flexible robotics when cables are used for actuation.

2024-07-03T08:18:00Z 25 pages, 10 figures Int. J. NonLinear Mech. 165 (2024) 104820 Matteo Gaibotti Davide Bigoni Arsenio Cutolo Massimiliano Fraldi Andrea Piccolroaz 10.1016/j.ijnonlinmec.2024.104820 http://arxiv.org/abs/2407.02541v1 2024-07-02T06:32:32Z

During the years 1948-2019 the ampere was defined via the magnetic force between two long thin parallel wires carrying stationary current. However, if a stationary current flows through a resistive wire, static electric charges appear on the surface of the wire, and this will lead to an additional electric force between the wires. This article discusses the ratio of electric over magnetic forces in the asymptotic limit of infinitely thin wires, which is not accessible by numerical methods. The electric force between the two wires depends also on the choice of the common ground node. For extremely thin or extremely long resistive wires the electric force dominates over the magnetic one.

2024-07-02T06:32:32Z 15 pages, 4 figures Udo Ausserlechner http://arxiv.org/abs/2407.01078v1 2024-07-01T08:31:48Z

The junction temperature is a very important parameter for monitoring power electronics converters based on MOSFET transistors. They offer the possibility of switching at relatively higher frequencies than other transistors like IGTBTs. However, the electrical parameters of MOSFETs are highly thermally dependent. The thermo-dependence of MOSFET electrical parameters is rarely taken into consideration when implementing control strategies, for many technological reasons, such as the difficulty of measuring the junction temperature. In practice, the junction temperature of transistors is inaccessible for direct measurement. The presence of a gel covering the chips, that provides electrical and thermal insulation, makes measurement by infrared thermography impossible. Furthermore, direct thermocouple measurement cannot be implemented due to the electromagnetic disturbances in the environment. Several researchers have attempted to correlate chip temperature with thermosensitive electrical parameters. In the present work, a thermal convolutive model has been developed to estimate the junction temperatures of two MOSFET transistors belonging to the same electronic circuit from external temperature measurements in two well-chosen locations (far away enough from the junction to avoid electromagnetic interference), using also the measured power dissipated on each chip. The thermal coupling between the two transistors has been considered in the form of mutual transmittances. The model was first calibrated using three-dimensional numerical simulations in COMSOL Multiphysics, followed by an experimental study. The results are very promising, illustrating the robustness of the convolutional model.

2024-07-01T08:31:48Z ICIPE 2024, Jun 2024, Buzios - Rio de Janeiro, Brazil Ali El Arabi LEMTA Denis Maillet LEMTA Nicolas Blet LEMTA Benjamin Remy http://arxiv.org/abs/2407.02529v1 2024-07-01T03:21:30Z

The quantitative phase image formation process is posed as a problem of parameter estimation from intensity measurements. This approach is inclusive of traditional pixel-oriented imaging, where the sought parameters are the pixel values. The resulting optimization process to find the parameters is then seen to depend on the Sensitivity Field: this is the gradient of the scattered field with respect to the parameters, and it turns out to obey a scattering relationship that is analogous to that of the original scattered field. Examples are given from several regimes of scattering strength.

2024-07-01T03:21:30Z George Barbastathis http://arxiv.org/abs/2402.12301v2 2024-06-30T09:49:52Z

Stimuli-responsive gels are the gels that vary the volume depending on environmental conditions. It has been reported that the stimuli-responsive gel with an inhomogeneous structure exhibits faster volume change than the gel without it. It is understood as a difference in the transfer dynamics of the solvent, though, there are few models for discussing the effect of inhomogeneity explicitly. In this paper, we propose a simple model for the kinetics of volume change by introducing inhomogeneity as the probability distribution for a random variable that characterizes the structure. Under this framework, we demonstrate that inhomogeneity actually increases the rate of volume change. Furthermore, through analysis of a simplified example, we show that some features that are often seen in experiments can be reproduced by the model. This model provides a simple equation for the time series of volume change that can be used to characterize the experimental data based on a simple physical picture of the phenomenon.

2024-02-19T17:24:35Z Yuhei Yamada Shingo Maeda 10.7566/JPSJ.93.083801