https://arxiv.org/api/RcstZlOmhB8SmbOcxf7KnFrtLoU 2026-06-21T18:32:49Z 9445 1035 15 http://arxiv.org/abs/2408.03949v1 2024-07-22T15:39:08Z

This paper characterizes a realistic feed for cylindrical metasurfaces, allowing it to be included in metasurface design. Specifically, it investigates a coaxial feed which is displaced from the center (off-center) of concentrically-cascaded cylindrical metasurfaces. Formulas are reported to quickly compute the multimodal S-matrix (scattering properties) of a displaced feed from that of the central feed. The theory is rigorously derived based on the addition theorem of Hankel functions for all azimuthal modes. Moreover, the resulting multimodal S-matrix is combined with the multimodal wave matrix theory used to model cylindrical metasurfaces, allowing devices to be designed that realize arbitrary field transformations from a displaced coaxial feed. A design example is reported, which opens new opportunities in the realization of realistic, high-performance cylindrical-metasurface-based devices.

2024-07-22T15:39:08Z 11 pages, 8 figures Chun-Wen Lin Richard W. Ziolkowski Anthony Grbic http://arxiv.org/abs/2304.04747v4 2024-07-20T22:22:09Z

In this paper, we describe the dynamical symmetries of classical supersymmetric oscillators in one and two spatial (bosonic) dimensions. Our main ingredient is a generalized Poisson bracket which is defined as a suitable classical counterpart to commutators and anticommutators. In one dimension, i.e., in the presence of one bosonic and one fermionic coordinate, the Hamiltonian admits a $U(1,1)$ symmetry for which we explicitly compute the first integrals. It is found that suitable forms of the supercharges emerge in a natural way as fermionic conserved quantities. Following this, we describe classical supercharge operators based on the generalized Poisson bracket and subsequently define supersymmetry transformations. We perform a straightforward generalization to two spatial dimensions where the Hamiltonian has an overall $U(2,2)$ symmetry. We comment on plausible supersymmetric generalizations of the Pais-Uhlenbeck and isotonic oscillators, and also present the possibility of defining a generalized Nambu bracket within the classical formalism.

2023-04-10T17:58:51Z v2: Minor correction to section-(VA), references added; v3: Substantially revised, to appear in Physica Scripta; v4: Minor changes and one typo corrected Akash Sinha Aritra Ghosh Bijan Bagchi 10.1088/1402-4896/ad63d6 http://arxiv.org/abs/2407.14752v1 2024-07-20T05:17:08Z

Existing methods for calculating substructure characteristic modes require treating interconnected metal structures as a single entity to ensure current continuity between different metal bodies. However, when these structures are treated as separate entities, existing methods exhibit inaccuracies, affecting the assessment of structural performance. To address this challenge, we propose an enhanced electromagnetic model that enables accurate characteristic mode analysis for regional structures within interconnected metal bodies. Numerical results validate the accuracy of the proposed method, and an antenna design example demonstrates its practical utility.

2024-07-20T05:17:08Z Chenbo Shi Jin Pan Xin Gu Shichen Liang Le Zuo 10.1109/LAWP.2024.3449107 http://arxiv.org/abs/2405.07383v2 2024-07-19T17:46:28Z

Resonant states underlie a variety of metastructures that exhibit remarkable capabilities for effective control of acoustic waves at subwavelength scales. The development of metamaterials relies on the rigorous mode engineering providing the implementation of the desired properties. At the same time, the application of metamaterials is still limited as their building blocks are frequently characterized by complicated geometry and can't be tuned easily. In this work, we consider a simple system of coupled Helmholtz resonators and study their properties associated with the tuning of coupling strength and symmetry breaking. We numerically and experimentally demonstrate the excitation of quasi-bound state in the continuum in the resonators placed in a free space and in a rectangular cavity. It is also shown that tuning the intrinsic losses via introducing porous inserts can lead to spectral splitting or merging of quasi-\textit{bound states in the continuum} and occurrence of \textit{exceptional points}. The obtained results will open new opportunities for the development of simple and easy-tunable metastructures based on Helmholtz resonances.

2024-05-12T21:59:14Z Mariia Krasikova Felix Kronowetter Sergey Krasikov Mikhail Kuzmin Marcus Maeder Tao Yang Anton Melnikov Steffen Marburg Andrey Bogdanov 10.1103/PhysRevApplied.22.024045 http://arxiv.org/abs/2407.13888v1 2024-07-18T20:24:56Z

The friction force is derived using fractional calculus by considering the non-uniform flow of time in dissipative processes. The approach incorporates inhomogeneous velocity without unphysical approximations, resulting in a Lagrangian where the order of fractional derivatives measures time intervals. The fractional term in the Lagrangian provides correct Euler-Lagrange, and ultimately, the Hamilton equations, and vanishes during energy change measurements, like a ghost.

2024-07-18T20:24:56Z Georgii Koniukov http://arxiv.org/abs/2407.13843v1 2024-07-18T18:25:11Z

The thermal conductivity, $κ$, of a homogeneous chain of generically-ranged interacting planar rotors, more precisely the inertial $α-XY$ model, is numerically studied with the coupling constant decaying as $r^{-α}$. The conductance ($σ\equiv κ/L$) is calculated for typical values of $α$, temperature $T$ and lattice size $L$. For large $L$, the results can be collapsed into an universal $q$-stretched exponential form, namely $L^{δ_α} σ\propto e_{q_α}^{-B_α(L^{γ_α}T)^{η_α}}$, where $e_q^z\equiv [1+ (1-q)z]^{1/(1-q)}$. The parameters $(γ_α,δ_α,B_α, η_α)$ are $α$-dependent, and $q_α$ is the index of the $q$-stretched exponential. This form is achievable due to the ratio $η_α/(q-1)$ being almost constant with respect to the lattice size $L$. Two distinct regimes are identified: for $0 \le α< 2$, the Fourier law is violated, whereas for $α\ge 2$, it is satisfied. These findings provide significant insights into heat conduction mechanisms in systems with long-range interactions.

2024-07-18T18:25:11Z 11 pages, 6 figures Henrique Santos Lima Constantino Tsallis Deniz Eroglu Ugur Tirnakli http://arxiv.org/abs/2407.14555v1 2024-07-18T08:04:21Z

The flow patterns created by a coherent horizontal liquid jet impinging on a vertical wall atmoderate flow rates (jet flowrates 0.5-4.0 L min-1, jet velocities 2.6-21 m s-1) are studied withwater on glass, polypropylene and polymethylmethacrylate (acrylic, Perspex(R)) using a novelparticle image velicometry (PIV) technique employing nearly opaque fluid doped withartificial pearlescence to track surface velocity. Flow patterns similar to those reported inprevious studies are observed on each substrate: their dimensions differed owing to theinfluence of wall material on contact angle. The dimensions are compared with models for (i)the radial flow zone, reported by Wang et al. (2013b), and the part of the draining film belowthe jet impingement point where it narrows to a node. For (ii), the model presented by Mertenset al. (2005) is revised to include a simpler assumed draining film shape and an alternativeboundary condition accounting for surface tension effects acting at the film edge. This refinedmodel gives equally good or better fits to the experimental data. The effective contact anglewhich gives good agreement with the data is found to lie between the measured quasi-staticadvancing and receding contact angles, at approximately half the advancing value. The PIVmeasurements confirmed the existence of a thin fast moving film with radial flow surroundingthe point of impingement, and a wide draining film bounded by ropes of liquid below theimpingement point. While these measurements generally support the predictions of existingmodels, these models assume that the flow is steady. In contrast, surface waves were evident inboth regions and this partly explains the difference between the measured surface velocity andthe values estimated from the models.

2024-07-18T08:04:21Z Experimental Thermal and Fluid Science, 2016, 74, pp.429-443 W. Aouad DAMTP Julien R. Landel DAMTP S. B. Dalziel DAMTP J. F. Davidson D. I. Wilson 10.1016/j.expthermflusci.2015.12.010 http://arxiv.org/abs/2407.13794v1 2024-07-16T09:49:39Z

A ring may be regarded as a torus with r << R, where R is the major radius and r is the minor radius. When such a ring is placed on a rough rod and released with some angular velocity, it may continue to vertically spin around the rod for some time instead of falling down immediately. It was observed that two different kinds of motion for the rod exist, which are referred to as single point and double point contact motion, based on the number of contact points of the ring that are in contact with the rod. Single point contact motion was observed for rings and double point contact motion was observed in the case of a washer. We investigated the characteristics of the single point contact motion. An explanation is provided for the single point contact motion of the ring and an analysis of the forces on the ring is made. We observe a hyperbolic decay in the angular velocity of the ring. An explicit solution is determined for the single point contact motion of the ring and the obtained solutions match the observed motion of the ring.

2024-07-16T09:49:39Z 7 pages, 6 figures Aradhya Jain http://arxiv.org/abs/2301.11106v2 2024-07-15T18:00:55Z

The Klein-Gordon equation for a scalar field sourced by a static spherically symmetric background is an interesting second-order differential equation with applications in particle physics, astrophysics, and elsewhere. Here we present static solutions for generic source density profiles in the case where the scalar field has no interactions or a mass term. For a $λφ^4$ self-interaction term, we develop the techniques that are necessary numerical computation. We also provide code to perform the numerical calculations that can be adapted for arbitrary density profiles.

2023-01-23T19:00:02Z 7 pages, 2 figures, comments welcome! v2: discussion and references expanded, matches published version Phys. Lett. B 855 (2024) 138860 Peter B. Denton 10.1016/j.physletb.2024.138860 http://arxiv.org/abs/2407.13792v1 2024-07-15T14:38:30Z

In previous work I have shown that Herglotz actions reproduce the dynamics of classical mechanical theories which exhibit dynamical similarities. Recent work has shown how to extend field theories in both the Lagrangian and de Donder-Weyl formalism to contact geometry. In this article I show how dynamical similarity applies in field theory. This is applied in both the Lagrangian and Hamiltonian frameworks, producing the contact equivalents. The result can be applied to general relativity where I demonstrate how to construct a complete description of the dynamics, equivalent to those derived from the Einstein-Hilbert action, without reference to the conformal factor.

2024-07-15T14:38:30Z David Sloan http://arxiv.org/abs/2407.09054v1 2024-07-12T07:20:48Z

A simplified 3D FE model based on McCormick's model is developed to numerically predict the spatiotemporal behaviors of the PLC effect in Ti-12Mo alloy tensile tests at 350 degrees C with strain rates from the order of $10^{-4}$ s$^{-1}$ to $10^{-2}$ s$^{-1}$. The material parameter identification procedure is firstly presented in details, and the simulated results are highly consistent with experimental ones, especially in terms of stress drop magnitudes and PLC band widths. The distribution of simulated stress drop magnitudes at a constant tensile velocity (0.01 mm/s) follows a normal distribution and its peak value is in the range of 26-28 MPa. Furthermore, the simulated band width slightly fluctuates with the increase of true strain and its average value is about 1.5 mm. Besides, the staircase behavior of strain-time curves and the hopping propagation of the PLC band are observed in Ti-12Mo alloy tensile process, which are related to the strain localization and stress drop magnitudes.

2024-07-12T07:20:48Z Metals and Materials International, 2023, 29 (2), pp.269-279 Shiyuan Luo IRDL Yongxin Jiang IRDL Sandrine Thuillier IRDL Philippe Castany ISCR Liangcai Zeng 10.1007/s12540-022-01226-4 http://arxiv.org/abs/2401.13775v2 2024-07-12T06:42:48Z

We use the concept of active antenna available power to derive a generalization of the Friis transmission formula for multiport antenna systems. With beamformer weights chosen such that the array patterns are the same when transmitting and receiving, the active antenna available power at the receiving antenna divided by the input power at the transmitter is symmetric under link direction reversal in the near field as well as the far field. These results generalize the Friis transmission formula to beamformed multiport antenna systems in an arbitrary reciprocal propagation environment.

2024-01-24T19:50:21Z 11 pages, 6 figures Karl F. Warnick Frederic Broyde Lukas Jelinek Miloslav Capek Evelyne Clavelier 10.1109/TAP.2024.3427400 http://arxiv.org/abs/2407.07733v1 2024-07-10T15:05:58Z

Plastic deformation in metallic glasses at room temperature leads to the development of shear bands due to shear localization. In many experiments, shear bands have shown local density variations along their path, with a distinct imbalance in magnitude between local densification and dilation. However, a comprehensive mechanistic understanding or theory to explain this asymmetry has been lacking until now. Here, we introduce a new model that consists of a sequential arrangement of alternating topological 'charges', generating a dipolar field. The resulting microscopic displacement field, when integrated into the deformation gradient tensor, provides an accurate analytical solution for the observed imbalances in the density variations. The implications of this method are discussed, highlighting the potential to elucidate a broader range of observations in shear bands.

2024-07-10T15:05:58Z Accepted for publication in Phys. Rev. B Physical Review B 110, 014107 (2024) Harald Rösner Arabinda Bera Alessio Zaccone 10.1103/PhysRevB.110.014107 http://arxiv.org/abs/2305.04125v5 2024-07-10T13:44:31Z

We apply perturbative techniques to a driven undamped sinusoidal oscillator at resonance. The angular displacement, $θ$, obeys the dynamics $\Ddotθ + ω^{2} \sinθ = H\cos{ωt}$. The linearized approximation gives a divergent response (at long times) but the nonlinear terms make the response finite. We address the nonlinearity-induced finiteness in two ways by separately treating the short and long time scales. At long times, we use the traditional perturbative techniques to extract two drive dependent behaviours - one, the amplitude of oscillation scales as $(H/ω^{2})^{1/3}$ and, two, the time period of the slow mode varies as $(H/ω^{2})^{-2/3}$. For the early time behaviour, on the other hand, we devise an alternate perturbative expansion where the successive terms get larger with the order of evaluation but have alternating signs. The alternating signs (phase differences) between these terms leads to adestructive interference like effect. A careful consideration of this destructive interference like effect between successive terms leads to a finite response which describes the initial behaviour of the amplitude of the response reasonably correctly. We further note that for larger drive values, the system seems to undergo a first order transitional behaviour with a sudden jump in the largest Lyapunov exponent.

2023-05-06T19:34:47Z 14 pages, 11 figures; Added references; Adjusted figures and text; added new figures and text Shihabul Haque Jayanta K. Bhattacharjee 10.1088/1751-8121/ad6412 http://arxiv.org/abs/2403.00089v2 2024-07-09T14:09:50Z

One-dimensional systems, such as nanowires or electrons moving along strong magnetic field lines, have peculiar thermalization physics. The binary collision of point-like particles, typically the dominant process for reaching thermal equilibrium in higher dimensional systems, cannot thermalize a 1D system. We study how dilute classical 1D gases thermalize through three-body collisions. We consider a system of identical classical point particles with pairwise repulsive inverse power-law potential $V_{ij} \propto 1/|x_i-x_j|^n$ or the pairwise Lennard-Jones potential. Using Monte Carlo methods, we compute a collision kernel and use it in the Boltzmann equation to evolve a perturbed thermal state with temperature $T$ toward equilibrium. We explain the shape of the kernel and its dependence on the system parameters. Additionally, we implement molecular dynamics simulations of a many-body gas and show agreement with the Boltzmann evolution in the low density limit. For the inverse power-law potential, the rate of thermalization is proportional to $ρ^2 T^{\frac{1}{2}-\frac{1}{n}}$ where $ρ$ is the number density. The corresponding proportionality constant decreases with increasing $n$.

2024-02-29T19:31:12Z 13 pages, 12 figures M. Eltohfa Xinghan Wang Colton M. Griffin F. Robicheaux