https://arxiv.org/api/ZOiCqVYgo5whghW4Hc+Y6BcgxuY2026-07-17T20:50:43Z9488015http://arxiv.org/abs/2607.15233v1Study of Duffing oscillator using an improved Lindstedt Poincare method and relevant comparisons2026-07-16T17:33:08ZThe undamped Duffing oscillator is a nonlinear dynamical system with broad applications in physics, engineering and biological system. We present a comprehensive analysis of this system using the Lindstedt Poincare method (LPM) and its modifications and make comparison with numerical solution obtained using higher order Runge-Kutta. It is also shown the method suggested in this article converges better than the standard LPM and Lindstedt Poincare method with Burton's modification.2026-07-16T17:33:08ZRamij AhamedSubhankar Rayhttp://arxiv.org/abs/2607.13833v1Cooling rate and glassy behavior in the Fermi--Pasta--Ulam system2026-07-15T13:42:39ZIn this work, we numerically studied the cooling process of a Fermi--Pasta--Ulam system, which occurs when the FPU system is placed in contact with a gas whose temperature $T$ is reduced with a certain cooling rate $ξ$. It was found that the existence of a weak stochastic threshold has a significant impact on the cooling process, because below such a stochastic threshold the specific FPU energy is larger than its temperature, i.e., the FPU system falls out of equilibrium. The difference remains finite in the limit $T \to 0$, so that the FPU system maintains a residual amount of energy $E_0$ at vanishing temperature. Our numerical simulations reveal that this energy exhibits a power--law dependence on both the system size and the cooling rate, scaling approximately as $E_{0} \sim (ξN)^{2/3}$.2026-07-15T13:42:39ZFive figuresMatteo RazzaAndrea CaratiLuigi Galganihttp://arxiv.org/abs/2607.11988v1Density evolution at fluid-fluid interfaces: A generalized Gibbs-Duhem theory2026-07-13T14:50:34ZThe classical Gibbs-Duhem relation applies to quasi-static processes and neglects kinetic effects, leaving a fundamental gap between Gibbs thermodynamics and Newtonian mechanics. Here, we derive a generalized Gibbs-Duhem framework that incorporates kinetic contributions, thereby establishing a unified connection between classical thermodynamics and Newtonian mechanics. Based on this framework, we propose an alternative evolution equation governing density dynamics at fluid-fluid interfaces. In appropriate limiting cases, the resulting density evolution equation naturally recovers the definition of the speed of sound, Bernoulli's law, and the van der Waals equation of state (EOS).2026-07-13T14:50:34ZFei Wanghttp://arxiv.org/abs/2607.11480v1Surface charge density of current-carrying conductors: An exact analytical solution for infinitely thin wires of arbitrary shape2026-07-13T12:34:59ZAn exact asymptotic expression is derived for the surface charge density associated with a steady current in closed loops or wire segments of infinitesimal cross section connected to a battery. Except for vanishingly thin boundary layers at the ends of the wire, and irrespective of the conductor shape, the charge density varies linearly with arc length, as does the electrostatic potential along the curve. This proportionality generalizes earlier results and provides a clear physical picture of charge accumulation in electrical circuits.2026-07-13T12:34:59ZRoberto Merlinhttp://arxiv.org/abs/2607.10303v1Tuning Plasma Frequency of Nested Wire Media2026-07-11T13:15:14ZWe study nested wire media possessing $C_6$ and $C_4$ rotational symmetries whose plasma frequencies can be controlled through breathing deformation. Numerical simulations reveal tunability exceeding $80\%$ and $60\%$ for the considered $C_6$ and $C_4$ breathing geometries, respectively. To describe these structures, we develop an analytical model based on the local field approach within the thin-wire approximation, which confirms the high tunability of the studied wire structures. We also propose an approximation for dense wire media. The developed framework is applicable to the general case of nested wire structures -- wire media with an arbitrary parallelogram lattice and multiple wires per unit cell.2026-07-11T13:15:14ZDenis SakhnoPavel A. Belovhttp://arxiv.org/abs/2606.29189v2Stable Ballistic Prograde Cyclers in the Three-Body Problem2026-07-10T19:50:15ZWe report the first continuous families of stable, ballistic, prograde cycler orbits in the circular restricted three-body problem: periodic trajectories that alternately undergo temporary capture and orbit each primary. We construct continuous families of symmetric cyclers from intersections of the stable and unstable manifold tubes of the $L_1$ Lyapunov orbit and exhibit stable examples across more than two orders of magnitude in mass ratio, from the Sun--Jupiter regime to the equal-mass limit. Linear stability separates naturally into planar and out-of-plane components. A planar-stable branch of every computed family is created simultaneously with a hyperbolic branch in a saddle-center bifurcation of the return map at the family's maximal Jacobi constant, while out-of-plane instability occurs only through isolated parametric resonances. Every computed family contains a subfamily that is linearly stable to both planar and out-of-plane perturbations. These stable cyclers persist into the full three-body problem for sufficiently small third mass. We conjecture that saddle-center birth is universal among cycler families, suggesting that stable cyclers are a generic feature of three-body dynamics.2026-06-28T04:23:16Z5 pages, 3 figures; submitted to Physical Review EShane D. RossMichael Roberts-Tsoukkashttp://arxiv.org/abs/2607.09213v1Mean field homogenization schemes for composites with prolate and oblate spheroids: use of the orientation tensors and computation of the strain second-moments2026-07-10T09:02:35ZIn this document we provide the homogenized stiffnesses from Mori-Tanaka scheme and Ponte-Casta{ñ}eda and Willis scheme applied to composites with spheroidal inclusions. The inclusions can be prolate spheroids ('fibers') or oblate spheroids ('penny-shapes'). We show how to compute the homogenized stiffnesses for particular distribution of spheroid orientations, using the second-order and fourth-order orientation tensors. We also provide formulas to compute the derivatives of these quantities w.r.t. the material parameters, which is of particular interest for computing the second-moments of the strains.2026-07-10T09:02:35ZAntoine MartinIRESNEhttp://arxiv.org/abs/2607.09083v1Chiral switching of elastic spin via dynamic encirclement of exceptional points2026-07-10T04:01:45ZDynamically encircling exceptional points (EPs) enables chiral state conversion in classical wave systems. However, whether this mechanism can be extended to chiral spin conversion has remained elusive. Here we demonstrate chiral switching of elastic spin via dynamic encirclement of EPs in a non-Hermitian micropolar (Cosserat) metamaterial. The interplay between micropolar chirality and anisotropic loss generates EPs with a nontrivial Riemann-sheet topology. Encircling these EPs converts the elastic spin, with the final spin sign dictated solely by the handedness of the encircling trajectory. Our results establish a fundamental route for the selective manipulation of elastic spin, opening avenues for non-Hermitian spin phononics and broader applications in other wave systems.2026-07-10T04:01:45Z7 pages, 4 figuresChenwen YangShubo Wanghttp://arxiv.org/abs/2607.14135v1Generalization of Rayleigh's high-frequency theory for the 2D Helmholtz equation in a half-space subject to a radiation condition at infinity and a Dirichlet condition on a 1D periodically-uneven boundary2026-07-09T22:25:12ZThe 2D Helmholtz equation, radiation condition and Dirichlet boundary condition, are the translation, in mathematical terms, of (at least) three physical 2D problems for the prediction of the total scalar wavefield on one side of an impenetrable 1D periodically uneven boundary when: a) a plane TE electromagnetic wave propagating in the vacuum strikes the boundary the other side of which is occupied by a perfectly-conducting medium, b) a plane SH elastic elastic wave strikes a rigid boundary, c) a plane acoustic wave strikes a pressure-release boundary. The first attempt to solve such problems in a non-heuristic manner was made by Lord Rayleigh (in his book, 'The Theory of Sound' which appeared in 1896). My task will be to revisit Rayleigh's theory of diffraction by a sinusoidal-shaped, impenetrable boundary, and more specifically, his perturbation method for obtaining a mathematically-explicit solution to the diffraction problem in the high-frequency regime. In so doing, I shall correct and generalize Rayleigh's method to obtain solutions for arbitrary angles of incidence as well as for 1D periodic impenetrable boundaries of quite-general shape.2026-07-09T22:25:12ZArmand Wirginhttp://arxiv.org/abs/2604.20690v2Unidirectional Transverse Scattering in Acoustic Dimers2026-07-09T20:16:44ZWe study unidirectional transverse scattering in a two-dimensional acoustic dimer composed of two circular subwavelength scatterers. Using a coupled multipole model, we show that interparticle coupling enables effective monopole--dipole interference and supports a transverse Kerker effect under plane-wave excitation. In contrast to a single non-absorbing rotationally symmetric particle, where Kerker-type directional scattering is only approached in the weak-scattering limit, the dimer can combine pronounced directionality with strong overall scattering. This regime is promising for compact acoustic beam steering and directional wave routing.2026-04-22T15:37:55Z9 pages, 5 figuresPhotonics and Nanostructures - Fundamentals and Applications 72 (2026), 101594Mikhail SmaginIuliia TimankovaPavel PankinYong LiMihail Petrov10.1016/j.photonics.2026.101594http://arxiv.org/abs/2607.08184v1An advanced undergraduate derivation of acceleration thermality2026-07-09T07:33:09ZThe thermal radioactivity of beta-decay photons, described by a 1D Planck distribution, can be modeled as classical radiation emitted by an accelerated electron. Here, we present the basics of the out-of-equilibrium computation to illustrate acceleration thermality. Suitable for advanced undergraduate calculations, we demonstrate that an exactly soluble non-uniformly accelerated trajectory enables spectral analysis of the emitted photons, facilitates time evolution, and reveals Planckian radiation.2026-07-09T07:33:09Z10 pages, 1 figureEur. J. Phys. (2026)Michael R. R. Good10.1088/1361-6404/ae87eahttp://arxiv.org/abs/2510.26360v3Momentum-Transfer Framework Unifies High-Velocity Impact and Failure Across Materials, Geometries, and Scales2026-07-08T17:38:56ZMaterials that dissipate energy efficiently under high-speed impacts, from micrometeoroid strikes on spacecraft to ballistic penetration in protective systems, are essential for maintaining structural integrity in extreme environments. Yet, despite decades of study, predicting and comparing impact performance across materials, geometries, and length scales remains challenging because conventional projectile-impact models often rely on conservation-based or empirically partitioned descriptions that assume the projectile-target interaction is a closed system. Here, we relax this assumption and directly observe the momentum and energy transferred out of the projectile during impact. We find that the momentum transferred to the target consistently reaches its maximum at the ballistic-limit velocity, demonstrated through a coordinated suite of micro-projectile impact experiments spanning varied projectile diameters, target thicknesses, and impact velocities, and further supported by targeted macroscale tests. This behavior is reinforced across a broad range of independent studies encompassing metals, polymers, composites, sandwich panels, and reinforced concrete, with thicknesses ranging from nanometers to hundreds of millimeters and projectiles of spherical, blunt, ogive, and conical shape, under both normal and oblique impacts. Together, these observations reveal a consistent impact behavior across all available data: maximum momentum transfer occurs at the ballistic limit. Extending this bound into the energy absorption landscape addresses an entrenched misconception in the field by revealing that specific energy absorption inherently inflates the performance of thinner targets due to geometric normalization, rather than reflecting genuine material enhancement.2025-10-30T11:08:47ZYasara DharmadasaNicholas JaegersbergAra KimJizhe CaiRamathasan Thevamaranhttp://arxiv.org/abs/2607.07734v1Constrained Classical Trajectories with Fixed Symplectic Area2026-07-07T11:16:46ZWe study finite bundles of $N$ classical trajectories subject to a fixed symplectic-area condition on their phase-space covariance. We derive constraint forces that preserve this condition with zero bundle-averaged power. Setting $κ= \hbar^2/4$ fixes only the area scale: the trajectories remain classical, and the finite bundle need not be Gaussian. In the Gaussian large-$N$ limit, the centroid and width equations coincide with those of variational Gaussian wave-packet dynamics. Here $N$ specifies the finite-bundle representation, not an order in the Moyal expansion or in an $\hbar$ expansion.2026-07-07T11:16:46ZTaisuke Hasegawahttp://arxiv.org/abs/2601.21776v3Model density approach to Ewald summations2026-07-07T10:30:51ZThe evaluation of the electrostatic potential is fundamental to the study of condensed phase systems. We discuss the calculation of the relevant lattice summations by Ewald-type techniques. A model charge density is introduced, that cancels multipole moments of the crystalline charge distribution up to a desired order, for accelerating convergence of the Ewald sums. The method is applicable to calculations of bulk systems, employing arbitrary unit cells in a classical or quantum context, and with arbitrary basis functions to represent the charge density. The efficacy of the method is demonstrated on the calculation of the fundamental gap of the gallium arsenide bulk semiconductor, as a prototype example, where significantly accelerated convergence is numerically confirmed, due to a reduction of the number of two-electron integrals that need to be computed. The approach clarifies a decades-old implementation in the CRYSTAL code.2026-01-29T14:27:01ZChiara RibaldoneJacques Kontak Desmaraishttp://arxiv.org/abs/2607.07731v1Spectral taxonomy for quartic systems: fundamental clock, parity, and continuum2026-07-07T01:40:45ZA symmetric quartic potential is a physics motif with incredibly expansive applications, ranging from broadband energy harvesters, quantum tunneling in molecules and the early universe, to torque-free spacecraft rotation. For nearly two centuries, its rich dynamics have been classified into regimes and expressed as disjointed time-domain solutions. Here we build a taxonomy for this broad class of motions and discover that their regimes exhibit a universal spectral structure: they share a fundamental clock, obey parity selection, and dissolve into the separatrix through a discrete-to-continuum transition. Applied to the famous Dzhanibekov effect where a rotating body (e.g., a spacecraft) periodically undergoes rapid 180-degree flips in its attitude, the taxonomy reveals its spectral anatomy. The three principal-axis rotations share a common clock while occupying distinct parity channels, with stable-axis branches exchanging DC bias across the separatrix. This converts the torque-free tumbling from a purely time-domain crisis into a frequency-domain design opportunity. By presenting the exact spectral solutions and their taxonomy, we offer a new frequency-aware framework by which physical systems can be characterized, designed, and controlled. We discuss a case study where the three spectral pillars: clock, parity, and continuum, survive the Wick rotation from real-time into imaginary-time kinematics. The persistent characteristics also invite the possibility that the universal spectral structure encompasses an entire class of major physics motifs -- a possible canonical behavior in conservative 1D dynamics.2026-07-07T01:40:45ZTeepanis Chachiyo