https://arxiv.org/api/AHSSxM44bmbVMkM+JZTpXyMxW5o2026-09-10T23:33:21Z281879015http://arxiv.org/abs/2008.08738v3Exact mapping from short-ranged harmonic elastic models of spin crossover materials to Ising models with interactions at all length scales2026-09-03T02:57:55ZSpin crossover (SCO) materials are reversible molecular switches found in a wide range of transition metal complexes and metal organic frameworks (MOFs). They exhibit diverse spin state orderings and transitions between them. Here we present an exact mapping from harmonic elastic models to Ising-like models with both a short-range Ising interaction that decays with a power law at large distances and a long-range (infinite-range) Husimi-Temperley interaction that is independent of distance. We apply this mapping to a simple model of SCO frameworks. This provides a microscopic justification for an Ising-Husimi-Temperley model description, which has previously only been justified on phenomenological grounds. Elastic frustration is required for non-zero Ising interactions, but whether or not the short-range interactions in the Ising model are geometrically frustrated depends on the ratio of the bulk and shear moduli, or equivalently Poisson's ratio. The long-range interaction has two origins: (i) a self-interaction on the average spin state, mediated through the coupling between the average spin state and the unit cell parameters; and (ii) an infrared divergence in the spin state-spin state coupling mediated by displacements of metals and ligands within the unit cell. %In the absence of elastic frustration these terms are equal and opposite so there is no long-range interaction. However, in general they do not cancel and there is a long-range Ising interaction. The long-range interaction is independent of the distance between metal centers, nevertheless it leads to an extensive contribution to the (free) energy. In this model the Husimi-Temperley interaction dominates transitions of spin states, whereas multistep transitions and intermediate order are observed if only the pure (power-law) Ising interaction are retained, only single-step transitions are found in the full model.2020-08-20T02:32:38ZRevised title. An additional author has been added. Our earlier derivation of the effective Ising model was incorrect as it did not take into account subtle boundary effects that lead to an infinite-range Ising interaction. This significantly changes the phase diagram of the model. For example, multi-step spin state transitions do not occurNadeem NattGian RuzziJace CruddasRoss H. McKenzieBen J. Powellhttp://arxiv.org/abs/2609.00594v2GW and Bethe-Salpeter Theory for Molecular Polaritons, Quasiparticles, and Excitons2026-09-03T02:54:17ZThe electron self-energy is central to quasiparticle theory, yet how an optical cavity enters it remains unclear. We address this question for a molecule in a single-mode cavity using the dipole-gauge Pauli-Fierz Hamiltonian and a coherent-state QED Hartree-Fock reference. The cavity enters through three channels: the static dipole self-energy (DSE) shift of reference orbital energies, direct DSE augmentation of the screened interaction, and the polariton pole carrying the bilinear electron-photon coupling. We benchmark QED-$GW$ ionization potentials (IPs) and electron affinities (EAs) against a cavity $Δ$-method ladder from QED-HF to correlated wave-function methods, whose cavity-induced shifts agree within 1 meV where directly comparable. For closed-shell molecules with unbound anions, $GW$ systematically overestimates cavity-induced IP redshifts, whereas EA shifts are reproduced nearly quantitatively, although this does not imply comparable accuracy for absolute EAs. For ionic molecules with bound anions, this ordering reverses, consistent with published QED coupled-cluster results. Coupling and detuning scans show that the error is predominantly quadratic in $λ$ and DSE-driven rather than resonant. The spectral function develops a polariton-replica photoemission sideband with weight scaling as $λ^2$. In the static screened interaction used in the Bethe-Salpeter equation, bare-photon exchange cancels the matching DSE contribution to the direct interaction, while exchange and polariton-screening corrections remain. Their net effect on the lowest excitation is appreciable only for ammonia in the molecules studied. Exciton-binding energies involving unbound anions are strongly basis-dependent and should therefore be viewed as diagnostics of electron-hole interactions rather than basis-converged molecular quantities.2026-09-01T02:33:49Z26 pages, 9 figuresSoohaeng Yoo WillowGi Beom SimTae Hyeon ParkTae In KimD. ChangMo YangMikuláš MatoušekJiří BrabecLibor VeisChang Woo Myunghttp://arxiv.org/abs/2608.08668v2What solvable models reveal about Born-Oppenheimer, Born-Huang, and exact factorization2026-09-03T02:06:03ZThe Born-Oppenheimer (BO) and single-surface Born-Huang (BH) approximations replace the full molecular problem by nuclear motion associated with one clamped electronic state, whereas the full BH expansion and exact factorization (EF) are exact representations. We use two analytically transparent models to identify what controls one-surface error. For Fernández's bilinearly coupled oscillators, the Brattsev ground-state bracket was already known; we derive closed-form differences proving strictness for every positive nuclear mass and nonzero stable coupling. Using Hunter's conditional-amplitude construction, we place the closed-form ground-state EF potential alongside BO and single-surface BH. Exact excited-state calculations show that the bracket does not extend through the spectrum. The diagonal BH correction is the quantum-metric coefficient of the retained electronic state divided by twice the nuclear mass. Fernández's sixth-order expansion shows that the next omitted correction contains the same derivative couplings, an additional inverse electronic-energy separation, and a factor depending on the nuclear state. We therefore add a two-state model with a position-dependent gap. Decreasing its minimum separation makes the metric higher and narrower while leaving the total Fubini-Study length equal to pi/2. The exact EF, BO, and BH potentials can differ visibly even when their nuclear ground-state amplitudes are nearly identical. The two models show that one-surface accuracy depends on nuclear mass, electronic-state variation, energy separation from omitted states, and the nuclear wavefunction.2026-08-09T12:22:10ZRevised and expanded version; title changed from "Born-Oppenheimer, Born-Huang, and exact factorization: quantum geometry and error in analytically transparent benchmark models." Historical attribution and terminology have been clarified, and the exact and numerical comparisons and error-budget discussion have been strengthened. Main conclusions unchanged. 37 pages, 5 figures, 5 tablesStephen Wigginshttp://arxiv.org/abs/2604.16013v2A Diagrammatic Route to Multi-Reference GW for Strongly Correlated Molecules2026-09-03T00:47:31ZThe GW approximation is a cornerstone of many-body perturbation theory for computing single-particle excitations, yet it can fail qualitatively in strongly correlated systems where the single-reference picture becomes inadequate. To overcome this limitation, we develop a diagrammatic route to multi-reference GW (MR-GW) from an interacting active-space reference, treating strong correlation nonperturbatively and the residual interaction through dynamical screening at the multi-reference random phase approximation level. Because the conventional diagrammatic self-energy expansion no longer applies, we define a practical one-shot MR-GW approximation within a generalized diagrammatic framework, recovering standard GW as a special case. Applications to prototypical correlated atoms and molecules show that the interacting active-space reference captures multiconfigurational satellite structures poorly described by single-reference GW, while dynamical screening generally improves the satellite energies as well as the leading ionization and electron-attachment energies. This work opens a diagrammatic route to Green's-function methods that combine nonperturbative strong correlation with dynamical screening.2026-04-17T12:42:51ZYuqi WangWei-Hai FangZhendong Lihttp://arxiv.org/abs/2609.03168v1Stochastic Tensor Contraction for Efficient MP2 Exchange2026-09-02T21:12:25ZSecond-order Moller--Plesset perturbation theory (MP2) is one of the simplest correlated wave-function methods, but its conventional $O(N^5)$ cost limits its application to large systems. Stochastic tensor contraction (STC) has recently appeared as a general technique to evaluate high-order tensor contractions in quantum chemistry. Here, we apply STC to the exchange contribution of Laplace-transformed MP2, which is the source of $O(N^5)$ scaling in the formulation. The resulting STC exchange algorithm has an $O(N^3)$ deterministic setup cost and an $O(N^2)$ stochastic cost at fixed absolute error. The estimator is unbiased and provides a way to specify the target stochastic error by estimating the number of required samples before the full calculation. We implement the algorithm using a hybrid deterministic--stochastic evaluation strategy, with grouped index sampling, to reduce the computational prefactor. Over a range of benchmark molecules containing up to $\sim 7000$ basis functions, the stochastic exchange evaluation takes as little as $1/270$ of the time of a complete DF-MP2 calculation on the same system. Within the Laplace-transformed formulation, the $O(N^4)$ scaling direct contribution is thus the only significant cost. Our results further substantiate the power of STC to serve as a general tensor-contraction engine for quantum chemistry.2026-09-02T21:12:25Z10 pages, 6 figuresJiace SunGarnet Kin-Lic Chanhttp://arxiv.org/abs/2609.03146v1Overlimiting Ion Transport and Reaction Limitations in Charged Porous Media2026-09-02T20:28:16ZElectrochemical reaction rates are controlled by both interfacial charge-transfer kinetics and reactive-ion transport. In charged porous media, fixed charges enrich reactive counterions near pore walls, enabling transport beyond the classical diffusion limit via surface conduction (SC). Under overlimiting conditions, classical Butler-Volmer kinetics predict indefinitely increasing current with overpotential, contrasting with microscopic electron-transfer theories, which impose a finite reaction-limited current. Here, we couple the one-dimensional leaky membrane model to coupled ion-electron transfer (CIET) kinetics to examine the interplay between transport and reaction limitations. The limiting behavior is governed by the scaled surface charge $(\tildeρ_s)$ and a Damköhler number $(Da)$ comparing reaction-limited and diffusion-limited currents. We derive analytical limiting-current expressions for neutral, positive, and negatively charged porous media, mapping underlimiting-to-overlimiting transitions in the $(Da,\tildeρ_s)$ plane. By preventing reactive-ion depletion, SC restores polarization-curve sensitivity to charge-transfer kinetics that would otherwise be obscured by diffusion limitation. Fitting to published Cu electrodeposition data in charged AAO membranes yields $Da\approx24$. CIET parameters fitted to AAO($-$) also describe AAO($+$) and predict a finite AAO($-$) reaction limit beyond the applied voltage range. These results provide a framework for distinguishing transport-limited and reaction-limited responses in electrochemical systems and establish charged porous media as platforms to reveal electrochemical reaction-kinetic descriptors.2026-09-02T20:28:16Z39 pages, 8 figuresArjun V. YennemadiJunghyun YoonMartin Z. Bazanthttp://arxiv.org/abs/1003.0563v3Cooperative and collective effects in light of the maximum energy dissipation principle2026-09-02T19:20:19ZWe compare the collective phenomena in physics and cooperative phenomena in bio logy/chemistry in terms of the variational description. The maximum energy dissipation employed and the cost -like functional was chosen according to an optimal control based formulation. Using this approach, the variational outline has been considered for non-equilibrium thermodynamic conditions. The differences between the application of the proposed approach to the description of cooperative phenomena in chemical/biochemical kinetics and the Landau free energy approach to collective phenomena in physics have been investigated.2010-03-02T11:35:09ZPreprint, 11 pages, 2 figures, submitted to Physics Letters A, appeared in 2010Physics Letters A 374 (2010) 2005-2010Adam Moroz10.1016/j.physleta.2010.02.066http://arxiv.org/abs/2609.03044v1Reactive calcium carbonate precipitation from an atomic cluster expansion potential and enhanced sampling2026-09-02T18:15:37ZCalcium carbonate formation from aqueous solution is central to biomineralization and to carbon sequestration through mineral carbonation. At near-neutral pH, the process is highly reactive, with proton transfer mediating the interconversion between carbonate species. Most atomistic simulations to date either treat carbonate speciation as fixed or consider proton transfer only in small clusters. Here, we combine an ab initio trained atomic cluster expansion (ACE) machine-learning potential for molecular dynamics with enhanced sampling to enable reactive simulations of the early stages of calcium carbonate precipitation at previously inaccessible length and time scales. We study proton transfer and carbonate speciation in ion pairs and triplets, as well as in the collective aggregation of many ions. Our simulations with few ions show that ion association provides a favorable pathway for proton transfer, facilitating interconversion between carbonate, bicarbonate, and carbonic acid. In many-ion systems, proton transfer occurs spontaneously alongside aggregation, and we observe significant changes in the coordination environments as species evolve during the simulations. These results show that ion aggregation and chemical reactivity can be strongly coupled during the early stages of nucleation from solution.2026-09-02T18:15:37ZEslam IbrahimYury LysogorskiyRalf DrautzPablo M. Piaggihttp://arxiv.org/abs/2609.02824v1Low-Temperature Transport in Li-Ion Battery EC/EMC/FEC Electrolytes: Molecular Dynamics and Machine-Learning Modeling2026-09-02T17:11:47ZLow-temperature operation imposes severe limitations on lithium-ion transport in battery electrolytes, yet the coupled effects of solvent composition and fluorinated additives in the cold-temperature regime remain insufficiently resolved. Here, we combine classical molecular dynamics (MD) and machine learning (ML) to investigate 1 M LiPF$_6$ electrolytes containing ethylene carbonate (EC), ethyl methyl carbonate (EMC), and EC/EMC (3:7), with 0-10 mol% fluoroethylene carbonate (FEC), from 298 to 233 K. MD simulations quantify Li$^+$ self-diffusion, Nernst-Einstein (NE) and Green-Kubo (GK) conductivities and local coordination, while Gaussian-process surrogates model conductivity across composition and temperature. Cooling produces a pronounced transport penalty, particularly in EMC-containing electrolytes, whose GK conductivity decreases by more than 98% at 233 K, compared with approximately 90% in EC-rich systems. Li$^+$ self-diffusion activation energies are 0.49-0.54 eV for EMC-containing systems and 0.27-0.29 eV for EC-based systems. Within the EC family, 0-2 mol% FEC gives comparable cold-temperature transport, whereas 5-10 mol% FEC shows lower conductivity retention at the coldest simulated temperature. The analyzed coordination channels remain solvent dominated, while direct Li$^+$-FEC coordination is not quantified in the present RDF set.The Gaussian-process surrogates achieve composition-disjoint cross-validated RMSE values of 0.56 and 0.57 mS cm$^{-1}$ for NE and GK conductivity. Within the simulated liquid-state trajectories, temperature and host-solvent composition dominate the bulk-transport response, with FEC acting as a secondary modifier.2026-09-02T17:11:47Zİpek Yenda ÇınarOguzhan OrhanM. Oluş ÖzbekŞener Özönderhttp://arxiv.org/abs/2512.17869v3Experimentally Mapping the Phase Diagrams of Photoexcited Small Polarons2026-09-02T16:30:13ZUnderstanding the fundamental properties that dictate photoexcited polarons in materials is critical to tuning their properties. Theoretical models of polarons have only recently been extended to the excited state. Experimental measurements of polaron formation and transport have been widely undertaken across a range of materials, from photocatalysts and superconductors to soft conducting polymers. Here, we map thermalized excited state experimental measurements of quantities such as polaron strength onto phase diagrams of the Holstein, Hubbard-Holstein, and t-J-Holstein models. This work demonstrates that tuning electron-phonon coupling strength, electron localization, and spin exchange can be leveraged to suppress or control polarons in transition metal oxides. We find that the t-J-Holstein model provides the clearest qualitative description of electron polarons in the measured iron oxides and could be generally applied to a wide range of systems that exhibit polaron formation in the excited state. This work combines experimental data with ground state models to provide a qualitative parameter space for informing photoexcited electron polaron design, under which excited state polaronic behavior can be classified within ground-state calculable models.2025-12-19T18:19:46Z43 pages, 5 figuresJocelyn L. MendesScott K. Cushinghttp://arxiv.org/abs/2609.02762v1Relating solute interactions to interfacial properties2026-09-02T16:02:19ZLiquid interfaces are both ubiquitous and also critically important for many commercial products, modern technologies, biological processes, and environmental phenomena. The properties of these interfaces can depend quite sensitively upon the composition of the bulk liquid phase. In this work, we develop a dilute solution theory (DST) for the influence of dilute cosolutes upon the interface between coexisting liquid and vapor phases. We employ a grand canonical perturbation theory to rigorously relate the interfacial free energy to the concentration of the liquid solution. We leverage a corresponding Gibbs ensemble to treat liquid-vapor coexistence and to eliminate the contribution of the bulk phases from this free energy. We express the coefficients of the resulting expansion in terms of microscopic partition functions. By treating solute-solute interactions to lowest order, we distinguish between the intrinsic and effective interfacial preferences of solutes. While the former reflects only solute-solvent interactions, the latter depends upon the solution composition and reflects the influence of solute-solute interactions. We assess this DST with molecular dynamics simulations of binary and ternary mixtures of Lennard-Jones spheres. These simulations demonstrate that DST accurately models the interfacial properties of these systems up to relatively high concentrations. Moreover, the simulations illustrate the impact of attractive solute-solute interactions in converting weak intrinsic surfactants into weak effective depletants.2026-09-02T16:02:19Z67 (41 + 26) pages, 6 figuresVarun MandalaparthyBenjamin M. CurleeWilliam G. Noidhttp://arxiv.org/abs/2609.02746v1HiPoly: a hierarchical polymer-native AI framework for property prediction and generative design2026-09-02T15:48:11ZPolymeric materials are central to modern technologies, with applications ranging from energy to health and transportation. Although AI has made significant advances in materials discovery, the hierarchical structure of polymers across multiple length scales makes them inherently difficult to represent in a unified and physically meaningful way. Here we introduce HiPoly, a polymer-native AI framework that processes complete polymer descriptions through a three-level hierarchical graph architecture built on the G2RINS representation. HiPoly encodes stochastic inter-monomer connectivity, composition, and molecular weight directly within its architecture, using physically motivated design principles that mirror the multi-scale nature of polymeric systems. The framework establishes an end-to-end AI-driven workflow from experimental formulation data to property prediction, generative molecular design, and physics-based validation through molecular simulations, all unified by a single polymer representation. We demonstrate state-of-the-art prediction accuracy for thermophysical properties of multi-component polymer systems, with ablation studies confirming that each hierarchical design choice contributes independently to model performance. As an example, the generative design pathway is applied here to the discovery of sustainable alternatives to persistent fluorinated polymers, where it is possible to identify and independently validate PFAS-free candidates with target surface-energy properties. This work demonstrates how polymer-native AI can accelerate discovery by linking representation, prediction, and design across complex polymer chemistries.2026-09-02T15:48:11ZGe SunGervasio ZaldivarYuan TianGustavo Perez LemusJuhae ParkDaryna SafarianMing HanJuan J. de Pablohttp://arxiv.org/abs/2609.02694v1RBMD 2.0: Random batch molecular dynamics package for large-scale simulations on multi-GPU architectures2026-09-02T15:01:29ZLarge-scale molecular dynamics simulations of particle systems on multi-GPU architectures are often constrained by the computational and communication costs of nonbonded force evaluation. We present RBMD 2.0, a major new release of the random batch molecular dynamics package designed for cross-node multi-GPU simulations of large-scale systems. It combines the improved random batch Ewald method with three-dimensional domain decomposition and ghost-particle communication to accelerate multi-GPU nonbonded force evaluation, while the DTK CUDA framework facilitates portability across heterogeneous accelerator architectures. Numerical experiments on multiple benchmark systems demonstrate both the accuracy and efficiency of simulations with RBMD 2.0. For simulations involving up to hundreds of millions of particles across multiple accelerator devices, one achieves speedups ranging from severalfold to approximately two orders of magnitude in nonbonded force evaluation while exhibiting over $97.5\%$ weak-scaling behavior. These results demonstrate the promising nature of RBMD 2.0 as a computational engine for future exascale molecular dynamics simulations.2026-09-02T15:01:29Z13 pages, 7 figuresQi ZhouYongfa GuoJincheng ZhongShou-Hang BoTeng ZhaoZhenli Xuhttp://arxiv.org/abs/2609.02666v1Liquid-liquid phase transitions in dipolar liquids. Insights into Supercooled Water2026-09-02T14:41:53ZDipolar liquids combine two coupled degrees of freedom, translational and dipolar. Intriguingly, these two sectors can reside in distinct thermodynamic states, with the state of one sector possibly favoring a specific state of the other. The onset of ferroelectric order in dipolar liquids is an example of this mutual stabilization. Since this coupling is often encoded in interaction potentials, projecting out one sector to derive an effective interaction for the other can uncover the microscopic mechanism underlying this phenomenon. A coarse-grained theory in which the distance between nearest-neighbor particles depends on their dipolar interaction through a density-dependent mechanical compliance shows that a ferroelectric transition can trigger a liquid-liquid transition. It also predicts a first-order liquid-liquid transition in the paraelectric phase that can in turn induce ferroelectric ordering. The anisotropic dipolar-dependent soft-core interaction is shown to lead to an effective Jagla-like isotropic two-length-scale interaction, known to support liquid-liquid phase transitions. Here, however, the two-length-scale pattern depends on density and dipolar configuration, becoming sensitive to dipolar order. Analysis of supercooled TIP4P/Ice water numerical simulations shows that first-coordination-shell features of pair correlation functions are sensitive to dipolar interaction, supporting the coarse-grained theory foundations. Comparison of low- and high-density liquid water reveals enhanced spatial anisotropy of the first coordination shell in the low-density liquid, with increased effective excluded volume, showing that the liquid-liquid transition involves structural changes within the first shell, beyond reorganization of the interstitial region and tetrahedral order. These findings point to a role for dipolar interactions in supercooled water liquid-liquid phase transition.2026-09-02T14:41:53ZMaria Grazia Izzohttp://arxiv.org/abs/2502.02429v4Modeling Reactions on the Solid-Liquid Interface With Next Generation Extended Lagrangian Quantum-Based Molecular Dynamics2026-09-02T14:13:47ZWe present a series of simulations of the oxygen reduction reaction (ORR) using a novel framework for atomistic simulations of surface catalysis under electrochemical bias. The framework makes use of quantum-mechanical extended Lagrangian Born-Oppenheimer molecular dynamics (XL-BOMD) simulations, which provide the speed and accuracy required for explicit atomistic treatment of both electrode and electrolyte. Simulations of solvated O$_2$ near nitrogen-doped graphene (NG) were performed to gain insight into the ORR, and different mechanisms were observed, depending on the applied bias. Under higher bias the ORR occurred by an outer-sphere mechanism, without adsorption of O$_2$ to NG. In this mechanism, electron transfer between the catalyst and the O$_2$ was mediated by the solvent. Under lower bias the ORR occurred by an inner-sphere mechanism involving adsorption of O$_2$ to NG, leading to direct electron transfer. Our extensive, all-atom quantum-mechanical molecular dynamics simulations also show clear differences between the kinetics of the ORR on this ideally polarizable electrode and commonly used kinetic theories, leading to new insights regarding mechanistic changes with varied overpotentials. Combining quantum accuracy with explicit solvation and electrostatic potential bias, XL-BOMD opens a route to predictive, atomistic insight into electrocatalytic processes, as demonstrated with the ORR.2025-02-04T15:53:48ZRae A. Corrigan GroveKevin G. KleinerJoshua FinkelsteinIvana MatanovicMichael E. WallTravis E. JonesAnders M. N. NiklassonChristian F. A. Negre