Seniority-zero Quadratic Canonical Transformation Theory

2026-04-29T01:12:18Z

We propose a method to solve the Schrödinger equation for systems with static/strong electron correlation using Hamiltonian transformations. Building on our previous work on seniority-zero canonical transformation theory, which seeks a unitary transformation that maps the Hamiltonian into the seniority-zero space, this method presents an alternative way of evaluating the Baker--Campbell--Hausdorff (BCH) expansion based on quadratic canonical transformation theory. The extension aims to relax the small-generator constraint by allowing approximate four-body contributions in the expansion, thus expanding the class of excitations previously allowed in SZ-LCT, where only approximate three-body operators were retained. Numerical tests reveal that the seniority-zero quadratic canonical transformation method (SZ-QCT) delivers good accuracy, with most errors within chemical accuracy. In particular, SZ-QCT shows sub-millihartree errors in cases where larger generators are needed to recover the residual dynamic correlation. The computational scaling of SZ-QCT is the same as that of SZ-LCT, $\mathcal{O}(N^8/n_c)$, where $n_c$ is the number of cores available for the computation

A Unified Formulation for $\langle \hat{S}^2 \rangle $ in Two-Component TDDFT

2026-04-29T00:50:52Z

Two-component linear-response time-dependent density functional theory (TDDFT) provides a unified framework that encompasses noncollinear excitations in noncollinear reference states, as well as both spin-conserving and spin-flip excitations in collinear reference states. In this work, we present a general formalism for evaluating the expectation value $\langle \hat{S}^2 \rangle$ of electronically excited states obtained within two-component TDDFT. We then derive and analyze specialized forms of the resulting equations for collinear reference determinants, for which the two-component formalism decomposes into conventional spin-conserving and spin-flip TDDFT. The resulting working equations are systematically compared with previously proposed theoretical approaches. On the basis of our analysis, $\langle \hat{S}^2 \rangle$ in the excited states is shown to arise from two distinct sources: (i) $\langle \hat{S}^2 \rangle_0$ in the reference state and (ii) additional $Δ\langle \hat{S}^2 \rangle$ introduced by the excitation process itself. Finally, we evaluate the expectation value $\langle \hat{S}^2 \rangle$ by performing two-component TDDFT calculations based on two-component DFT, unrestricted Kohn-Sham (UKS), and restricted open-shell Kohn-Sham (ROKS) reference states, respectively.

A Tutorial Review of Bayesian Optimization with Gaussian Processes to Accelerate Stationary Point Searches

2026-04-28T23:59:41Z

Building local surrogates to accelerate stationary point searches on potential energy surfaces spans decades of effort. Done correctly, surrogates can reduce the number of expensive electronic structure evaluations by roughly an order of magnitude while preserving the accuracy of the underlying theory, with the gain depending on oracle cost, search distance, and the availability of analytical forces. We present a unified Bayesian optimization view of minimization, single-point saddle searches, and double-ended path searches: all three share one six-step surrogate loop and differ only in the inner optimization target and the acquisition criterion. The framework uses Gaussian process regression with derivative observations, inverse-distance kernels, and active learning, and we develop optional extensions for production use, including farthest-point sampling with the Earth Mover's Distance, MAP regularization, an adaptive trust radius, and random Fourier features for scaling. Accompanying pedagogical Rust code demonstrates that all three applications use the same Bayesian optimization loop, bridging the gap between theoretical formulation and practical execution.

Solv-eze: Automated Placement of Explicit Water Molecules Using 3D-RISM

2026-04-28T21:57:40Z

Molecular dynamics (MD) simulations are widely used to study biological systems, where water molecules often play a critical role in protein-ligand interactions. In conventional MD preparation protocols, water molecules are typically added from a pre-equilibrated solvent box and removed using conservative steric cutoffs, an approach that can eliminate important interfacial waters that are often not recovered during equilibration due to kinetic barriers limiting exchange with bulk solvent. In this work, we present an automated and computationally efficient method for placing water molecules around biomolecular solutes using three-dimensional reference interaction site model (3D-RISM) solvent density distributions. By identifying regions of high solvent probability, the method generates physically meaningful initial hydration structures without requiring extended sampling or specialized techniques such as grand canonical Monte Carlo (MC) or hybrid MC/MD approaches, and will be released as an update to AmberTools 26, enabling seamless integration into standard MD preparation pipelines. We validate the approach on a diverse set of protein-ligand complexes with crystallographically resolved bridging waters, showing that 3D-RISM-based placement reproduces a large fraction of these experimentally observed waters, while subsequent minimization further improves agreement as crystallographic waters relax toward positions consistent with those predicted by our approach. Overall, this method enables more accurate and practical initialization of interfacial hydration, improving the reliability of MD simulations with modest computational cost relative to routine system preparation.

A Priori Sampling of Transition States with Guided Diffusion

2026-04-28T20:58:14Z

Transition states, the first-order saddle points on the potential energy surfaces, govern the kinetics and mechanisms of chemical reactions and conformational changes. Locating them is challenging because transition pathways are topologically complex and can proceed via an ensemble of diverse routes. Existing methods address these challenges by introducing heuristic assumptions about the pathway or reaction coordinates, which limits their applicability when a good initial guess is unavailable or when the guess precludes alternative, potentially relevant pathways. We propose to bypass such heuristic limitations by introducing ASTRA, A Priori Sampling of TRAnsition States with Guided Diffusion, which reframes the transition state search as an inference-time scaling problem for generative models. ASTRA trains a score-based diffusion model on configurations from known metastable states. Then, ASTRA guides inference toward the isodensity surface separating the basins of metastable states via a principled composition of conditional scores. A Score-Aligned Ascent (SAA) process then approximates a reaction coordinate from the difference between conditioned scores and combines it with physical forces to drive convergence onto first-order transition states. Validated on benchmarks ranging from 2D potentials to biomolecular conformational changes and a chemical reaction, ASTRA locates transition states with high precision and discovers multiple reaction pathways, enabling mechanistic studies of complex molecular systems.

DFT-assisted natural abundance 13C zero-field NMR via optical magnetometry

2026-04-28T19:20:24Z

Zero-field (ZF) nuclear magnetic resonance (NMR) spectroscopy probes scalar J-couplings between nuclei while dispensing with large homogeneous magnetic fields, enabling low-cost and geometrically flexible detection, including through conductive enclosures. Despite these advantages, its broader use for chemical analysis has been limited by sensitivity and by the difficulty of predicting the dense spectral multiplets that arise at zero field. Here we demonstrate natural-abundance (1.1%) 13C ZF spectroscopy on off-the-shelf liquids using a compact commercial 87Rb magnetometer for the first time, without hyperpolarization or special sample preparation. Instrumental advances yield improved sensitivity, <250-mHz linewidths and >week-long stability, enabling isotopomer-resolved fingerprint spectra across a 13-molecule library, including the ability to discern rare (0.0121%) doubly 13C-labelled species. In parallel, we demonstrate vibrationally corrected density-functional theory (DFT) based prediction of ZF NMR spectra for chemically diverse molecules with few-hertz accuracy. Comparing experiment with these calculations renders residual deviations as chemically informative, reporting on hydrogen bonding, hydration and ion pairing at high ionic strength. Together, these results contribute towards DFT-assisted ZF NMR as a general platform for field-constraint-free molecular identification and for extracting transient solution-state structure from responsive J-coupling observables.

Thermodynamic Properties of Diatomic Molecules from the Frost-Musulin Potential

2026-04-28T16:11:58Z

In this study, we present a quantum-statistical analysis of H$_2$ and LiH diatomic molecules within the Frost--Musulin potential framework. By combining the analytical bound-state approach to the radial Schrödinger problem with the near-equilibrium Pekeris representation, we obtain a validated rotation-vibration spectrum that reproduces a physically consistent ordering of energy levels. These bound states are subsequently combined with standard translational and rotational ideal gas contributions to construct the total partition function and the corresponding thermodynamic observables of the ground state. The resulting formulation captures the Gibbs free energy deviation function for both molecules with high quantitative accuracy and provides chemically plausible trends for heat capacity and enthalpy increase over a wide temperature range. At the same time, residual errors become increasingly pronounced in derivative-sensitive quantities, particularly at high temperatures; this indicates that the dominant limitations now stem not from the local bound-state spectrum itself, but from the neglect of inelastic rotational, continuity contributions and dynamics close to dissociation. Consequently, the present results define the potential model as a compact and analytically tractable representation of the bound region, recovering a significant portion of the observed thermochemistry whilst also delineating the regime where more comprehensive molecular statistical mechanics is required.

Quantum sensing-enabled deuterium NMR spectroscopy with nanoscale sensitivity at low magnetic fields

2026-04-28T15:16:06Z

Nuclear magnetic resonance (NMR) spectroscopy provides unparalleled access to molecular structure and dynamics but is traditionally limited by weak signal strength, requiring large sample volumes and high magnetic fields. Here, we demonstrate nanoscale deuterium (2H) NMR spectroscopy using nitrogen vacancy (NV) centers in diamond, reproducing the characteristic quadrupolar powder line shapes that are present in the conventional bulk NMR spectra. By detecting statistical spin fluctuations from nanometer scale detection volumes, our approach delivers a sensitivity enhancement of six to eight orders of magnitude over inductive detection while operating at magnetic fields two orders of magnitude lower than those used in conventional NMR. Temperature dependent measurements of a deuterated polymer and molecular solid reveal distinct motional averaging and phase transitions with nanoscale sensitivity. Powder-like NV detected 2H NMR establishes a powerful tool for probing molecular dynamics on the nanoscale and, in the ultimate limit, at the single molecule level - capabilities beyond those of most existing spectroscopic techniques.

Validity of DFT+U band gaps in all its known functional forms

2026-04-28T14:34:05Z

The Density Functional Theory plus Hubbard $U$ (DFT+$U$) technique is one of the most widely used tools by condensed matter physicists and solid state chemists for the simulation of transition-metal and lanthanide bearing crystals, and increasingly of much more diverse chemistries. Although often synonymous with the corrective functionals of Dudarev et al. and Liechtenstein et al., there exists a wide variety of DFT+$U$-type functionals ready to be utilized, and no doubt yet to be developed. Since the earliest days, the gap in the DFT+$U$ single-particle eigenspectrum has been associated with the fundamental band gap, and the method has typically found more success for spectra than for total-energy derived properties. There has been some doubt, however, as to the conceptual validity of this association. Here, extending findings from recent years regarding local and semi-local functionals, we prove that the DFT+$U$ eigenspectrum gap is indeed valid, in the sense that it matches its own fundamental gap calculated using total-energy differences. This is true for pristine periodic systems with converged $k$-point sampling but not, however, for defective ones or isolated systems. We show that bandgap validity for solids holds in the presence of pseudopotentials and PAW potentials, when using hybrid functionals, and in DFT+$U$(+$J$) irrespective of the level of subspace projection onto the band-edge states. We survey every DFT+$U$-type functional known to have been published to date, within a unified notation. We verify analytically under which conditions the eigenvalue gap equals its fundamental gap for each functional, and analyze its effect on total energies and gaps for the hydrogen lattice in the Mott-Hubbard limit.

AI-Powered Surrogate Modelling for Multiscale Combustion: A Critical Review and Opportunities

2026-04-28T13:24:25Z

Recent advances in combustion science have led to the generation of large volumes of data from high-fidelity simulations, detailed chemical-kinetic calculations and engine-relevant measurements and create new opportunities for data-driven modelling across interacting physical and chemical scales. Among these approaches, artificial intelligence has emerged as a promising framework for constructing surrogate models that reduce computational costs, deliver substantial speed-up and support prediction in complex reacting systems. This review provides a state-of-the-art assessment of AI-powered surrogate modelling for multiscale combustion, spanning chemical kinetics, mechanism reduction, turbulent flames, combustors, engines, and emissions prediction. Supervised, unsupervised, and hybrid or physics-guided learning approaches are examined and compared in terms of predictive accuracy, physical consistency, computational efficiency, and generalizability across conditions and scales. The review further discusses key challenges, including limited transferability across fuels and operating regimes, extrapolation errors, inconsistency in datasets and benchmarks, and the difficulty of building robust and trustworthy models for practical combustion workflows. Future opportunities are identified in the development of more reliable, scalable, and physically grounded surrogate frameworks for next-generation combustion research.

Accelerated Surface Hopping via Scaling the Spin--Orbit Coupling: Opportunities for Machine Learning

2026-04-28T13:09:14Z

Surface hopping (SH) methods are typically employed to simulate ultrafast nonadiabatic processes, but long timescales often remain beyond their reach. To address this, accelerated SH scheme mitigate this limitation by scaling the driving forces of such process, either nonadiabatic couplings (NACs) in case of internal conversion or spin-orbit couplings (SOCs) for intersystem crossing. However, obtaining the actual time constant requires extrapolation from several ensembles of trajectories with different scaling factors. This introduces a significant computational demand, often restricting the number of trajectories per ensemble and, therefore, reducing the statistical confidence in the resulting time constant. In this work, we investigate the accelerated scheme using silaethylene (CH$_2$SiH$_2$) as a case study, evaluating various population fitting methods and extrapolation techniques. We trained machine learning models for potential energy surfaces (PESs) and NACs, and extended our rotate-predict-rotate approach to fit SOCs. These models demonstrate high performance, yielding populations within the confidence interval of the reference MR-CISD/SA-CASSCF(2,2) data; however, the extrapolation itself is highly sensitive to the fitted time constants, leading to discrepancies in the final time constant. Finally, we showcase and discuss how ML models can enhance the reliability of an accelerated SH scheme.

Self-consistent vertex corrected $GW$ with static and dynamic screening using tensor hypercontraction: assessment of molecular ionization potentials

2026-04-28T12:49:56Z

In this work, we benchmark tensor hypercontraction (THC)-accelerated fully self-consistent $GW$ (sc$GW$) and vertex-corrected self-consistent $GW$ (sc$GWΓ$) methods for predicting molecular first ionization potentials (IPs). The vertex function, $Γ$, is inserted into the self-energy in a fully self-consistent manner, and representative sc$GW$ and sc$GWΓ$ variants are assessed across the $G_0W_0\Gamma29$ and $GW100$ data sets. We find that the THC decomposition introduces negligible errors into self-consistent $GW$ ionization potentials, indicating that the acceleration preserves the underlying fully self-consistent results. Across both benchmark sets, vertex-corrected sc$GWΓ$ methods primarily produce systematic shifts in the IPs relative to sc$GW$ rather than consistent accuracy improvements. These results identify THC as a reliable route to lower-cost sc$GW$ and sc$GWΓ$ calculations

Suiren-1.0 Technical Report: A Family of Molecular Foundation Models

2026-04-28T11:33:25Z

We introduce Suiren-1.0, a family of molecular foundation models for the accurate modeling of diverse organic systems. Suiren-1.0 comprising three specialized variants (Suiren-Base, Suiren-Dimer, and Suiren-ConfAvg) is integrated within an algorithmic framework that bridges the gap between 3D conformational geometry and 2D statistical ensemble spaces. We first pre-train Suiren-Base (1.8B parameters) on a 70M-sample Density Functional Theory dataset using spatial self-supervision and SE(3)-equivariant architectures, achieving robust performance in quantum property prediction. Suiren-Dimer extends this capability through continued pre-training on 13.5M intermolecular interaction samples. To enable efficient downstream application, we propose Conformation Compression Distillation (CCD), a diffusion-based framework that distills complex 3D structural representations into 2D conformation-averaged representations. This yields the lightweight Suiren-ConfAvg, which generates high-fidelity representations from SMILES or molecular graphs. Our extensive evaluations demonstrate that Suiren-1.0 establishes state-of-the-art results across a range of tasks. All models and benchmarks are open-sourced.

Excitation of Low-Frequency Modes and the Effects of Protein Dynamics on Spectral Densities of Bacteriochlorophyll Molecules

2026-04-28T10:06:52Z

In the theory of open quantum systems, spectral densities are key quantities for modeling the dynamics and spectroscopic properties of the system under investigation. In the case of light-harvesting complexes, they encode the frequency-dependent coupling of electronic excitations in pigment molecules to their environment, reflecting contributions from both intrinsic vibrational modes and the protein surrounding. In particular, the low-frequency components of the spectral densities are crucial for exciton transfer between pigment molecules. Apparently, slow internal modes of bacteriocholophyll molecules in the gas phase are less well represented by common force fields based on classical molecular dynamics (MD) simulations. Here, we demonstrate that Born-Oppenheimer molecular dynamics (BOMD) based on the numerically efficient density functional-based tight-binding approach can accurately recover these low-frequency features, whereas normal mode analysis captures them only partially. In contrasting approaches for determining spectral densities, the low-frequency region of the spectral densities obtained is only associated with protein fluctuations; the usage of BOMD, however, also captures the low-frequency contributions arising from slow intramolecular vibrations of the pigment molecules themselves. Notably, this behavior is consistently observed for both the flexible B800 and the more rigid B850 rings in light-harvesting 2 (LH2) complexes of purple bacteria, as well as in the Fenna-Matthews-Olson (FMO) complex of green sulfur bacteria. Interestingly, we also find that the spectral densities of the pigments in the B850 ring of LH2 are not influenced by the environment, i.e., the gaps between ground and first excited state are not changed significantly by the fluctuations of the protein environment.

How hydrodynamic interactions alter polymer stretching in turbulence

2026-04-28T09:10:55Z

Hydrodynamic interactions (HI) between segments of a polymer have long been known to strongly affect polymer stretching in laminar viscometric flows. Yet the role of HI in fluctuating turbulent flows remains unclear. Using Brownian dynamics simulations, we examine the stretching dynamics of bead-spring chains with inter-bead HI, as they are transported in a homogeneous isotropic turbulent flow (within the ultra-dilute, one-way coupling regime). We find that HI-endowed chains exhibit a steeper coil-stretch transition as the elastic relaxation time is increased, i.e., HI cause less stretching of stiff polymers and more stretching of moderately to highly elastic polymers. The probability distribution function of the end-to-end extension is also modified, with HI significantly limiting the range of extensions over which a power-law range appears. On quantifying the repeated stretching and recoiling of chains by computing persistence time distributions, we find that HI delays migration between stretched and coiled states. These effects of HI, which are consistent with chains experiencing an effective conformation-dependent drag, are sensitive to the level of coarse-graining in the bead-spring model. Specifically, an HI-endowed dumbbell, which cannot form a physical coil, is unable to experience the hydrodynamic shielding effect of HI. Our results highlight the importance of incorporating an extension-dependent drag force in dumbbell-based simulations of turbulent polymer solutions. To develop and test such an augmented dumbbell model, we propose the use of a time-correlated Gaussian random flow, in which the turbulent stretching statistics are shown to be well-approximated.