https://arxiv.org/api/XzzQORtVum11KA1TRf95eBhoZO0 2026-06-21T13:25:43Z 17764 765 15 http://arxiv.org/abs/2512.23112v1 2025-12-28T23:21:13Z

Viruses display striking diversity in structure, transmission mode, immune interaction, and evolutionary behavior. Despite this diversity, viral strategies are not unconstrained. Here we present a unifying framework that treats viral evolution as a problem of constrained optimization governed by physical decay, immune pressure, mutation robustness, and transmission architecture. We model virions as multi-component physical systems subject to irreversible environmental failure and viruses as replicators operating under immune-driven selection and mutation-selection balance. Within this framework, major viral transmission strategies arise as necessary solutions rather than taxonomic accidents. Environmentally transmitted and airborne viruses are predicted to be structurally simple, chemically stable, and reliant on replication volume rather than immune suppression. Structurally complex viruses tolerate rapid environmental decay by encoding immune-modulatory machinery, latency, or persistent replication, at the cost of reduced mutation robustness. Temperature-dependent seasonality emerges naturally from the thermally activated nature of viral decay, without invoking host behavior.

2025-12-28T23:21:13Z Mohammad Rasoolinejad http://arxiv.org/abs/2512.23094v1 2025-12-28T22:12:57Z

We propose a new analytical potential function to model proton transfer in the adenine-thymine base pair and develop a non-adiabatic quantum mechanical framework to calculate genetic mutation probabilities. This potential has been used to calculate the probability of mutation in a non-adiabatic process. The results of the new model have been shown to be consistent with the findings of other researchers.

2025-12-28T22:12:57Z 9 figures, 15 pages Chemical Physics, 2025, 113074, Chemical Physics, 113074 Hossien Hossieni 10.1016/j.chemphys.2025.113074 http://arxiv.org/abs/2512.23034v1 2025-12-28T18:23:39Z

The aim of this study was to investigate the impact of ambient air plasma treatment on both sunflower seed germination and early steps of seedling development under water stress. Dry seeds were exposed to a cold atmospheric plasma (CAP) generated in a dielectric barrier device where excited molecular nitrogen and ozone were detected by optical emission spectroscopy and mass spectrometry respectively. Interestingly, we explain the crucial role of gap's accuracy when treating seeds with CAP, especially to improve interaction between seeds and plasma and therefore ensure an efficient treatment. CAP significantly improved the germination rates of seeds of dormant and non-dormant sunflower genotypes under water stress, demonstrating its efficiency in alleviating seed dormancy and in improving germination under suboptimal conditions. Furthermore, greenhouse experiments demonstrated that plasma treatment also stimulated seedling development under water stress conditions. These findings highlight the potential of CAP treatment as an effective approach to promote the whole process of emergence of crop species.

2025-12-28T18:23:39Z J. Phys. D: Appl. Phys. 59 (2026) 015210 L. Taras C. Bailly T. Dufour 10.1088/1361-6463/ae2ae6 http://arxiv.org/abs/2512.12660v2 2025-12-28T15:06:06Z

Quantum synchronisation has recently been proposed as a mechanism for electronic excitation energy transfer in light-harvesting complexes, yet its robustness in driven-dissipative settings remains under active investigation. Here, we revisit this mechanism in cryptophyte photosynthetic antennae using an exciton--vibrational dimer model. By comparing the full open quantum dynamics with semi-classical rate equations for electronic density-matrix elements and vibrational observables, we demonstrate that quantum correlations between electronic and vibrational degrees of freedom, beyond the semi-classical factorised limit, underpin the emergence of quantum synchronisation. Furthermore, we introduce an environment-assisted transfer mechanism arising as a nonlinear, non-Condon correction to the dipole--dipole interaction. This mechanism enables long-lived quantum coherence and continuous, synchronisation-enhanced energy transfer in a driven-dissipative regime, thereby suggesting new avenues for investigating photosynthetic energy-transfer dynamics.

2025-12-14T12:16:09Z Wenhao Xu 10.1016/j.mtquan.2026.100059 http://arxiv.org/abs/2512.22820v1 2025-12-28T07:15:13Z

Chromatin is repeatedly deformed in vivo during transcription, nuclear remodeling, and confined migration - yet how mechanical response varies from locus to locus, and how it relates to epigenetic state, remains unclear. We develop a theory to infer locus-specific viscoelasticity from three-dimensional genome organization. Using chromatin structures derived from contact maps, we calculate frequency-dependent storage and loss moduli for individual loci and establish that the mechanical properties are determined both by chromatin epigenetic marks and organization. On large length scales, chromatin exhibits Rouse-like viscoelastic scaling, but this coarse behavior masks extensive heterogeneity at the single-locus level. Loci segregate into two mechanical subpopulations with distinct longest relaxation times: one characterized by single-timescale and another by multi-timescale relaxation. The multi-timescale loci are strongly enriched in active marks, and the longest relaxation time for individual loci correlates inversely with effective local stiffness. Pull-release simulations further predict a time-dependent susceptibility: H3K27ac-rich loci deform more under sustained forcing yet can resist brief, large impulses. At finer genomic scales, promoters, enhancers, and gene bodies emerge as "viscoelastic islands" aligned with their focal interactions. Together, these results suggest that chromatin viscoelasticity is an organized, epigenetically coupled property of the 3D genome, providing a mechanistic layer that may influence enhancer-promoter communication, condensate-mediated organization, and response to cellular mechanical stress. The prediction that locus-specific mechanics in chromatin are controlled by 3D structures as well as the epigenetic states is amenable to experimental test.

2025-12-28T07:15:13Z Also available on bioRxiv (doi: 10.64898/2025.12.27.696709) Guang Shi D. Thirumalai http://arxiv.org/abs/2512.22651v1 2025-12-27T17:03:12Z

The possibility that evolutionary forces -- together with a few fundamental factors such as thermodynamic constraints, specific computational features enabling information processing, and ecological processes -- might constrain the logic of living systems is tantalizing. However, it is often overlooked that any practical implementation of such a logic requires complementary circuitry that, in biological systems, happens through complex networks of genetic regulation, metabolic reactions, cellular signalling, communication, social and eusocial non-trivial organization. We review and discuss how circuitries are not merely passive structures, but active agents of change that, by means of hierarchical and modular organization, are able to enhance and catalyze the evolution of evolvability. Using statistical physics to analyze the role of non-trivial topologies in major evolutionary transitions, we show that biological innovations are related to deviation from trivial structures and (thermo)dynamic equilibria. We argue that sparse heterogeneous networks such as hierarchical modular, which are ubiquitously observed in nature, are favored in terms of the trade-off between energetic costs for redundancy, error-correction and maintainance. We identify three main features -- namely, interconnectivity, plasticity and interdependency -- pointing towards a unifying framework for modeling the phenomenology, discussing them in terms of dynamical systems theory, non-equilibrium thermodynamics and evolutionary dynamics. Within this unified picture, we also show that slow evolutionary dynamics is an emergent phenomenon governed by the replicator-mutator equation as the direct consequence of a constrained variational nonequilibrium process. Overall, this work highlights how dynamical systems theory and nonequilibrium thermodynamics provide powerful analytical techniques to study biological complexity.

2025-12-27T17:03:12Z 40 pages, 7 figures, 391 references Reports on Progress in Physics, 2026 Manlio De Domenico 10.1088/1361-6633/ae2ca2 http://arxiv.org/abs/2512.22568v1 2025-12-27T11:54:54Z

The phenomenal advances in large language models (LLMs) and other foundation models over the past few years have been based on optimizing large-scale transformer models on the surprisingly simple objective of minimizing next-token prediction loss, a form of predictive coding that is also the backbone of an increasingly popular model of brain function in neuroscience and cognitive science. However, current foundation models ignore three other important components of state-of-the-art predictive coding models: tight integration of actions with generative models, hierarchical compositional structure, and episodic memory. We propose that to achieve safe, interpretable, energy-efficient, and human-like AI, foundation models should integrate actions, at multiple scales of abstraction, with a compositional generative architecture and episodic memory. We present recent evidence from neuroscience and cognitive science on the importance of each of these components. We describe how the addition of these missing components to foundation models could help address some of their current deficiencies: hallucinations and superficial understanding of concepts due to lack of grounding, a missing sense of agency/responsibility due to lack of control, threats to safety and trustworthiness due to lack of interpretability, and energy inefficiency. We compare our proposal to current trends, such as adding chain-of-thought (CoT) reasoning and retrieval-augmented generation (RAG) to foundation models, and discuss new ways of augmenting these models with brain-inspired components. We conclude by arguing that a rekindling of the historically fruitful exchange of ideas between brain science and AI will help pave the way towards safe and interpretable human-centered AI.

2025-12-27T11:54:54Z Rajesh P. N. Rao Vishwas Sathish Linxing Preston Jiang Matthew Bryan Prashant Rangarajan http://arxiv.org/abs/2512.21870v1 2025-12-26T05:09:55Z

Soft surfaces, spanning vastly different environmental and biomedical settings, are frequently colonised by surface-associated bacteria. Yet, how soft surfaces govern bacterial dynamics and their self-organisation into colonies remains poorly understood. Using experiments and agent-based modelling, we report the self-organisation of bacterial cells into nascent biofilms on soft substrates. By tuning the elastic modulus over two orders of magnitude, we show that the colony morphology, spreading dynamics and collective behaviour depend on the substrate stiffness, wherein softer surfaces promote slowly expanding, geometrically anisotropic, multilayered colonies, while harder substrates drive rapid, isotropic expansion of bacterial monolayers before multilayer structures emerge. Supported a cell mechanical model and two-dimensional agent-based simulations, our results identify that anisotropic drag forces on soft substrates, emerging due to local deformations, underpin colony anisotropy and swift verticalisation. In contrast, reduced drag on hard surfaces allows rapid expansion of monolayers, thus delaying the transition to a multilayer structure. Surface compliance, a key but overlooked determinant of early-stage biofilm development, could be harnessed to engineer biofilm structures and dynamics for nature-inspired and biomedical applications.

2025-12-26T05:09:55Z 45 pages (including Supplementary Materials), 7 Figures, and 10 Supplementary Figures. arXiv admin note: substantial text overlap with arXiv:2508.01021 Garima Rani G. H. Philipp Nguyen René Wittmann Hartmut Löwen Anupam Sengupta http://arxiv.org/abs/2512.21854v1 2025-12-26T04:25:23Z

As the cover of embryos and adult organisms, epithelial tissues are subjected to substantial mechanical forces in tissue morphogenesis. However, the finite deformation behaviors of epithelial tissues remain largely unexplored. This study combines discrete vertex simulations with a multiscale constitutive model to investigate the necking behavior of epithelial tissues. In the multiscale model, the shape changes and topological transitions of single cells are mapped to the elastic and inelastic tissue deformations via a mean-field formulation. Our results show that the necking bifurcation of a stretched tissue arises from cellular topological transitions. The bifurcation condition and the steady state of necking propagation are predicted from the constitutive model and validated by vertex simulations. Furthermore, we find that topological defects in disordered tissues facilitate necking bifurcation but impede its propagation. These defects also induce the necked region to collapse into a thin thread, as observed in real tissues. Together, our work provides valuable insights into the deformation behaviors of epithelial tissues.

2025-12-26T04:25:23Z Yuan He Shi-Lei Xue http://arxiv.org/abs/2512.21537v1 2025-12-25T07:13:28Z

Orb-weaving spiders primarily sense leg vibrations to detect and locate prey caught on their wheel-shaped webs. Biological experiments and computational modeling elucidated the physics of how these spiders use long-timescale web-building behaviors, which occur before prey capture, to modulate vibration sensing of prey by controlling web geometry, materials, and tension distribution. By contrast, the physics of how spiders use short-timescale leg behaviors to modulate vibration sensing on a web during prey capture is less known. This is in part due to challenges in biological experiments (e.g., having little control over spider behavior, difficulty measuring the whole spider-web-prey system vibrations) and theoretical/computation modeling (e.g., close-form equations intractable for a complex web, high computation cost for simulating vibrations with behaving animals). Here, we use robophysical modeling as a complementary approach to address these challenges and study how dynamic leg crouching behavior common in orb-weaving spiders contributes to vibration sensing of prey on a web. We created a robophysical model consisting of a spider robot that can dynamically crouch its legs and sense its leg vibrations and a prey robot that can shake both on a horizontal physical wheel-shaped web. We discovered a physical mechanism that can allow the spider to use leg crouching to detect prey presence and distance. Our work demonstrated that robophysical modeling is a useful approach for discovering physical mechanisms of how spiders use short-time scale leg behaviors to enhance vibration sensing of objects on a web and providing new biological hypotheses.

2025-12-25T07:13:28Z 19 figures, 1 table Eugene H. Lin Yishun Zhou Hsin-Yi Hung Luke Moon Andrew Gordus Chen Li http://arxiv.org/abs/2512.17397v2 2025-12-24T22:08:45Z

Nanopores (NPs) grown by anodizing can be partially hidden beneath a relatively compact surface oxide layer, which limits the volumetric surface area of these nanostructures. In this work, nitinol (NiTi) alloy was anodized in an electrolyte containing ethylene glycol, water, and sodium chloride in static and stirred electrolyte stages with the aim of removing the irregular surface array while achieving a thick NP layer. Electron micrographs showed that anodization in the static electrolyte provides a controlled thickness of NP layers covered by an irregular surface layer. In contrast, anodizing in the stirred electrolyte reduced the thickness and the degree of irregularity, which were controlled by the different kinetics of dissolution at the tops, perimeters and bottoms of NPs. To benefit simultaneously from the thickness and regularity of the oxide layers, two-stage anodizing under static and then stirred electrolyte conditions was found to be effective. Following a 30 min anodization in the static electrolyte, anodizing for 30 min under the stirred conditions provided the highest regularity in the oxide array, resulting in NPs of almost 40 nm and 11 μm in diameter and layer thickness, respectively. Two-stage anodizing under static then stirred electrolyte conditions is proposed in order to promote NP structures for applications demanding higher surface areas.

2025-12-19T09:47:58Z Surface and Coatings Technology, 405 (2021) 126707 S. A. Mousavi A. Moshfeghi F. Davoodian E. Salahinejad 10.1016/j.surfcoat.2020.126707 http://arxiv.org/abs/2512.21389v1 2025-12-24T19:11:14Z

Rapid and accessible cardiac biomarker testing is essential for the timely diagnosis and risk assessment of myocardial infarction (MI) and heart failure (HF), two interrelated conditions that frequently coexist and drive recurrent hospitalizations with high mortality. However, current laboratory and point-of-care testing systems are limited by long turnaround times, narrow dynamic ranges for the tested biomarkers, and single-analyte formats that fail to capture the complexity of cardiovascular disease. Here, we present a deep learning-enhanced dual-mode multiplexed vertical flow assay (xVFA) with a portable optical reader and a neural network-based quantification pipeline. This optical sensor integrates colorimetric and chemiluminescent detection within a single paper-based cartridge to complementarily cover a large dynamic range (spanning ~6 orders of magnitude) for both low- and high-abundance biomarkers, while maintaining quantitative accuracy. Using 50 uL of serum, the optical sensor simultaneously quantifies cardiac troponin I (cTnI), creatine kinase-MB (CK-MB), and N-terminal pro-B-type natriuretic peptide (NT-proBNP) within 23 min. The xVFA achieves sub-pg/mL sensitivity for cTnI and sub-ng/mL sensitivity for CK-MB and NT-proBNP, spanning the clinically relevant ranges for these biomarkers. Neural network models trained and blindly tested on 92 patient serum samples yielded a robust quantification performance (Pearson's r > 0.96 vs. reference assays). By combining high sensitivity, multiplexing, and automation in a compact and cost-effective optical sensor format, the dual-mode xVFA enables rapid and quantitative cardiovascular diagnostics at the point of care.

2025-12-24T19:11:14Z 32 Pages, 6 Figures, 2 Tables Light: Science & Applications (2026) Gyeo-Re Han Merve Eryilmaz Artem Goncharov Yuzhu Li Shun Ye Aoi Tomoeda Emily Ngo Margherita Scussat Xiao Wang Zixiang Ji Max Zhang Jeffrey J. Hsu Omai B. Garner Dino Di Carlo Aydogan Ozcan 10.1038/s41377-026-02275-9 http://arxiv.org/abs/2512.21335v1 2025-12-24T18:59:47Z

Computational point-of-care (POC) sensors enable rapid, low-cost, and accessible diagnostics in emergency, remote and resource-limited areas that lack access to centralized medical facilities. These systems can utilize neural network-based algorithms to accurately infer a diagnosis from the signals generated by rapid diagnostic tests or sensors. However, neural network-based diagnostic models are subject to hallucinations and can produce erroneous predictions, posing a risk of misdiagnosis and inaccurate clinical decisions. To address this challenge, here we present an autonomous uncertainty quantification technique developed for POC diagnostics. As our testbed, we used a paper-based, computational vertical flow assay (xVFA) platform developed for rapid POC diagnosis of Lyme disease, the most prevalent tick-borne disease globally. The xVFA platform integrates a disposable paper-based assay, a handheld optical reader and a neural network-based inference algorithm, providing rapid and cost-effective Lyme disease diagnostics in under 20 min using only 20 uL of patient serum. By incorporating a Monte Carlo dropout (MCDO)-based uncertainty quantification approach into the diagnostics pipeline, we identified and excluded erroneous predictions with high uncertainty, significantly improving the sensitivity and reliability of the xVFA in an autonomous manner, without access to the ground truth diagnostic information of patients. Blinded testing using new patient samples demonstrated an increase in diagnostic sensitivity from 88.2% to 95.7%, indicating the effectiveness of MCDO-based uncertainty quantification in enhancing the robustness of neural network-driven computational POC sensing systems.

2025-12-24T18:59:47Z 18 Pages, 5 Figures ACS Nano (2026) Artem Goncharov Rajesh Ghosh Hyou-Arm Joung Dino Di Carlo Aydogan Ozcan 10.1021/acsnano.6c06616 http://arxiv.org/abs/2512.21369v1 2025-12-24T03:34:24Z

In this research, a novel group of Ca-Mg oxyfluorosilicates containing different levels of fluoride substituting for oxide was synthesized by an inorganic salt coprecipitation process followed by calcination/sintering. The effects of the incorporation of fluoride on the resultant structural characteristics, apatite-forming ability and biodegradability were evaluated by X-ray diffraction, transmission electron microscopy, scanning electron microscopy/energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, inductively coupled plasma spectroscopy and pH measurements. According to the results, the samples containing up to 2 mol% F present a single-phase structure of diopside (MgCaSi2O6) doped with F. It was also found that to meet the most biomineralization characteristic, the optimal value of fluoride in the homogeneous samples is 1 mol%. In this regard, on the one hand, the partial incorporation of fluoride into apatite (via forming fluorohydroxyapatite) and, on the other hand, the absence of fluorite (CaF2) as a consumer of Ca in the deposits are responsible for achieving the most apatite-forming ability circumstance controlled by an ion-exchange reaction mechanism. In conclusion, this study reflects the merit of the optimization of fluoride-doping into Ca-Mg silicates for development in biomedicine.

2025-12-24T03:34:24Z Ceramics International, 43 (2017) 10299-10306 E. Salahinejad M. Jafari Baghjeghaz 10.1016/j.ceramint.2017.05.059 http://arxiv.org/abs/2512.20894v1 2025-12-24T02:35:26Z

Stationary take-off, without a running start or elevated descent, requires substantial aerodynamic forces to overcome weight, particularly for large birds such as geese exceeding 2 kg. However, the complex wing motion and high-Reynolds-number (Re $\approx$$10^5$) flow dynamics challenge conventional expectations of avian flight aerodynamics, rendering this mechanism elusive. Analyzing 578 stationary take-offs from seven geese (\textit{Anser cygnoides}) and applying Principal Component Analysis (PCA), we reveal that the complex wing kinematics collapse onto a low-dimensional manifold dominated by two synergies: a Stroke Synergy responsible for fundamental rhythmic stroke, and a Morphing Synergy governing spanwise geometry. This modular control strategy orchestrates a stereotyped wing kinematics featuring an accelerated translational downstroke and a rapid tip-reversal upstroke. By integrating wing kinematic analysis with the mass distribution of the geese, we quantified the aerodynamic forces and found that entirely positive lift and thrust are generated throughout the motion cycle. The enhanced aerodynamic performance of geese takeoff results from three principal mechanisms. During the downstroke, significant lift generated from wing acceleration is predicted by the quasi-steady framework. Flow visualization reveals that wake capture further enhances the lift generation in downstroke by orienting the position of wake vortices. During the upstroke, the distal wing performs a rapid pitching motion and generates a substantial thrust, the vertical component of which contributes significantly to weight support.

2025-12-24T02:35:26Z 17 pages, 4 figures, to be submitted to a journal Jinpeng Huang Yang Xiang Lunbing Chen Suyang Qin Jixin Lu Sen Ye Yong Chen Hong Liu