Bound state properties, positron annihilation and hyperfine structure of the four-body positronium hydrides

2024-03-15T00:03:53Z

Bound state properties of the ground (bound) ${}^{1}S(L = 0)-$state(s) in the four-body positronium hydrides ${}^{1}$HPs, ${}^{2}$HPs (DPs), ${}^{3}$HPs (TPs) and MuPs are determined and investigated. By using numerical data from our computations of these four-body systems we have determined a number of different annihilation rates for each of these positronium hydrides and evaluated the hyperfine structure splitting. The properties of the ground (bound) states in the four-body exitonic ${}^{M}h^{+} e^{-}_{2} e^{+}$ complexes, where $M \ge 1$ and $M \le 1$, have also been evaluated numerically. The neutral four-body systems ${}^{M}h^{+} e^{-}_{2} e^{+}$ with $M \gg 1$ are similar to the HPs hydrides. In particular, each of these states has only one bound state. We also discuss applications of the exponential and semi-exponential variational expansions for accurate, bound state computations of the four-body positronium hydrides.

From anti-Arrhenius to Arrhenius behavior in a dislocation-obstacle bypass: Atomistic Simulations and Theoretical Investigation

2024-03-14T21:10:02Z

Dislocations are the primary carriers of plasticity in metallic material. Understanding the basic mechanisms for dislocation movement is paramount to predicting the material mechanical response. Relying on atomistic simulations, we observe a transition from non-Arrhenius to Arrhenius behavior in the rate for an edge dislocation to overcome the elastic interaction with a prismatic loop in tungsten. Beyond the critical resolved shear stress, the process shows a non-Arrhenius behavior at low temperatures. However, as the temperature increases, the activation entropy starts to dominate, leading to a traditional Arrhenius behavior. We have computed the activation entropy analytically along the minimum energy path following Schoeck's methods [1], which capture the cross-over between anti-Arrhenius and Arrhenius domains. Also, the Projected Average Force Integrator (PAFI) [2], another simulation method to compute free energies along an initial transition path, exhibits considerable concurrence with Schoeck's formalism. We conclude that entropic effects need to be considered to understand processes involving dislocations bypassing elastic barriers close to the critical resolved shear stress. More work needs to be performed to fully understand the discrepancies between Schoeck's and PAFI results compared to molecular dynamics.

Temperature and Tautomeric Effects in High-Resolution Oxygen 1s X-ray Photoelectron Spectroscopy of Purines and Pyrimidines

2024-03-14T05:09:22Z

Purines and pyrimidines, crucial building blocks in biological systems, have attracted significant interest across molecular physics, biochemistry, pharmacology, and chemistry. Extensive spectroscopies have been employed for characterization, while the temperature and potential tautomeric effects can complicate the interpretation of underlying physics and chemistry. Here, we conducted first-principles simulations to analyze the vibrationally-resolved O1s X-ray photoelectron spectra of 6 common biomolecules at different temperatures, comprising 3 purine (xanthine, caffeine, and hypoxanthine) and 3 pyrimidine (thymine, 5F-uracil, and uracil) derivatives, and the tautomeric effect of hypoxanthine at varying temperatures. Using both time-independent (TI) and time-dependent (TD) methods under the Franck-Condon approximation, we obtained theoretical spectra that exhibited excellent agreement with experiments. Our analysis of these systems, all featuring carbonyl oxygens, unveiled distinctive characteristics of oxygen in N-CO-N (O2) compared to that within a N-CO-C structure (O1), showcasing higher O1s binding energy and total vibrational reorganization energy. We observed small differences in the zero-point vibration energies between the core-ionized and ground states, indicating a weak Duschinsky rotation effect. We consistently found that O1s ionization resulted in elongation of the O*=C bond length. The TI method facilitated the assignment of experimental spectra to different atoms or tautomers, where the atom-specific vibronic profiles of all 6 molecules exhibited similarity, with the 0-2 transitions dominating. TD enabled a more comprehensive exploration of the temperature effect, and the tautomeric effect of hypoxanthine by incorporating the Boltzmann population ratios of tautomers. We observed significant temperature dependence in the vibronic features present in these spectra.

Timepix3: single-pixel multi-hit energy-measurement behavior

2024-03-11T21:53:02Z

The event-driven hybrid-pixel detector readout chip, Timepix3, has the ability to simultaneously measure the time of an event on the nanosecond timescale and the energy deposited in the sensor. However, the behaviour of the system when two events are recorded in quick succession of each other on the same pixel was not studied in detail previously. We present experimental measurements, circuit simulations, and an empirical model for the impact of a preceding event on this energy measurements, which can result in a loss as high as 70~\%. Accounting for this effect enables more precise compensation, particularly for phenomena like timewalk. This results in significant improvements in time resolution -- in the best case, multiple tens of nanoseconds -- when two events happen in rapid succession.

Confinement of $N$-body systems and non-integer dimensions

2024-03-11T08:52:48Z

The squeezing process of a three-dimensional quantum system by use of an external deformed one-body oscillator potential can also be described by the $d$-method, without external field and where the dimension can take non-integer values. In this work we first generalize both methods to $N$ particles and any transition between dimensions below $3$. Once this is done, the use of harmonic oscillator interactions between the particles allows complete analytic solutions of both methods, and a direct comparison between them is possible. Assuming that both methods describe the same process, leading to the same ground state energy and wave function, an analytic equivalence between the methods arises. The equivalence between both methods and the validity of the derived analytic relation between them is first tested for two identical bosons and for squeezing transitions from 3 to 2 and 1 dimensions, as well as from 2 to 1 dimension. We also investigate the symmetric squeezing from 3 to 1 dimensions of a system made of three identical bosons. We have in all the cases found that the derived analytic relations between the two methods work very well. This fact permits to relate both methods also for large squeezing scenarios, where the brute force numerical calculation with the external field is too much demanding from the numerical point of view, especially for systems with more than two particles.

Electrochemical Lensing for High Resolution Nanostructure Synthesis

2024-03-09T21:07:35Z

The advancement of liquid phase electron beam induced deposition has enabled an effective direct-write approach for functional nanostructure synthesis with the possibility of three-dimensional control of morphology. For formation of a metallic solid phase, the process employs ambient temperature, beam-guided, electrochemical reduction of precursor cations resulting in rapid formation of structures, but with challenges for retention of resolution achievable via slower electron beam approaches. The possibility of spatial control of redox pathways via the use of water-ammonia solvents has opened new avenues for improved nanostructure resolution without sacrificing the growth rate. We find that ammonia concentration locally modulates reaction kinetics, altering the balance between reducing and oxidizing species, leading to distinct deposition outcomes. The key effect is an 'electrochemical lensing', achieved at an optimum ammonia concentration, in which a tightly confined and highly reducing environment is created locally to enable high resolution, rapid beam-directed nanostructure growth. We demonstrate this unique approach to high resolution synthesis through a combination of analysis and experiment.

Comprehensive Molecular Representation from Equivariant Transformer

2024-03-07T10:12:47Z

The tradeoff between precision and performance in molecular simulations can nowadays be addressed by machine-learned force fields (MLFF), which combine \textit{ab initio} accuracy with force field numerical efficiency. Different from conventional force fields however, incorporating relevant electronic degrees of freedom into MLFFs becomes important. Here, we implement an equivariant transformer that embeds molecular net charge and spin state without additional neural network parameters. The model trained on a singlet/triplet non-correlated \ce{CH2} dataset can identify different spin states and shows state-of-the-art extrapolation capability. Therein, self-attention sensibly captures non-local effects, which, as we show, can be finely tuned over the network hyper-parameters. We indeed found that Softmax activation functions utilised in the self-attention mechanism of graph networks outperformed ReLU-like functions in prediction accuracy. Increasing the attention temperature from $τ= \sqrt{d}$ to $\sqrt{2d}$ further improved the extrapolation capability, indicating a weighty role of nonlocality. Additionally, a weight initialisation method was purposed that sensibly accelerated the training process.

Correlated Rotational Alignment Spectroscopy: A New Tool for High-Resolution Spectroscopy and the Analysis of Heterogeneous Samples

2024-03-06T11:45:52Z

Correlated rotational alignment spectroscopy correlates observables of ultrafast gas-phase spectroscopy with high-resolution, broad-band rotational Raman spectra. This article reviews the measurement principle of CRASY, existing implementations for mass-correlated measurements, and the potential for future developments. New spectroscopic capabilities are discussed in detail: Signals for individual sample components can be separated even in highly heterogeneous samples. Isotopologue rotational spectra can be observed at natural isotope abundance. Fragmentation channels are readily assigned in molecular and cluster mass spectra. And finally, rotational Raman spectra can be measured with sub-MHz resolution, an improvement of several orders-of-magnitude as compared to preceding experiments.

Theoretical Prediction of Low-Energy Experimental Photoelectron Spectra of Al$_n$Ni$^{-}$ Clusters (n=1-13)

2024-03-01T22:40:18Z

Context Mixed-metal clusters have long been studied because of their peculiar properties and how they change with cluster size, composition and charge state and their potential roles in catalysis. The characterization of these clusters is therefore a very important issue. One of the main experimental tools for characterizing their electronic structure is photoelectron spectroscopy. Theoretical computation completes the task by fully determining the structural properties and matching the theoretical predictions to the measured spectra. We present density functional theory computations of the structural, magnetic and electronic properties of negatively charged mixed Al$_{n}$Ni$^{-}$ clusters with up to 13 Al atoms. The lowest energy structures of the anionic clusters with up to 7 atoms are also found to be low energy isomers of the neutral counterparts found in the literature. The 13-atom cluster is found to be a quartet and a perfect icosahedron. The predicted photoelectron spectra are also presented and can be used to interpret future experimental data. We also presented indicators that can be used to determine the potential of these systems for single atom catalysis. These indicators point to smaller clusters to be more reactive as the gap between the Fermi energy and the center of the d-band increases with cluster size and that Ni occupy and internal site for n=11-13. We speculate that reactivity can be enhanced if one adds an additional Ni atom. Methods The DFT calculations were performed using the Becke exchange and Perdew-Wang/91 correlation functionals (BPW91), a DFT-optimized all-electron basis set for the aluminum atom and the Stuttgart small core pseudopotential for the Ni atom. All of the computations used the Gaussian 03 software.

Equilibria and Dynamics of two coupled chains of interacting dipoles

2024-02-27T12:53:02Z

We explore the energy transfer dynamics in an array of two chains of identical rigid interacting dipoles. A crossover between two different ground state (GS) equilibrium configurations is observed with varying distance between the two chains of the array. Linearizing around the GS configurations, we verify that interactions up to third nearest neighbors should be accounted for accurately describe the resulting dynamics. Starting with one of the GS, we excite the system by supplying it with an excess energy DK located initially on one of the dipoles. We study the time evolution of the array for different values of the system parameters b and DK. Our focus is hereby on two features of the energy propagation: the redistribution of the excess energy DK among the two chains and the energy localization along each chain. For typical parameter values, the array of dipoles reaches both the equipartition between the chains and the thermal equilibrium from the early stages of the time evolution. Nevertheless, there is a region in parameter space (b,DK) where even up to the long computation time of this study, the array does neither reach energy equipartition nor thermalization between chains. This fact is due to the existence of persistent chaotic breathers.

Spectra of the D2O dimer in the O-D fundamental stretch region: the acceptor symmetric stretch fundamental and new combination bands

2024-02-22T19:07:20Z

The O-D stretch fundamental region of the deuterated water dimer, (D2O)2, is further studied using a pulsed supersonic slit jet and a tunable optical parametric oscillator infrared source. The previously unobserved acceptor symmetric O-D stretch fundamental vibration is detected, with Ka = 0 <-- 0 and 1 <-- 0 sub-bands at about 2669 and 2674 cm-1, respectively. Analysis indicates that the various water dimer tunneling splittings generally decrease in the excited vibrational state, similar to the three other previously observed O-D stretch fundamentals. Two new (D2O)2 combination bands are observed, giving information on intermolecular vibrations in the excited O-D stretch states. The likely vibrational assignments for these and a previously observed combination band are discussed.

Using biocompatible materials as substrate coating for electric field enhancement in tip-enhanced Raman spectroscopy

2024-02-20T09:05:28Z

In this article, tip-enhanced Raman spectroscopy (TERS) is investigated as a precise method for analysis of biological samples. Using Finite Difference Time Domain (FDTD) simulation, it has been tried to design the required structures for analysis of these samples. At first, by comparing different TERS structures and considering the material, dimensions and other parameters in the simulation, the ideal structure is introduced from a physical point of view and considering the electric field enhancement. In the following, taking into possibility of the effect of environmental and chemical reactions during testing on biological samples, biocompatible materials are used as substrate coating in the simulation, and the effect of using these materials are investigated in comparison with the previous conditions. After performing the simulations, we concluded that Au, Cu and Ag have the highest electric field enhancement, respectively, and the presence of Au next to Cu, also Au and Cu next to Ag, leads to the enhancement of the electric field in them. In the following, we found that the material and thickness of the layer under the coating in the substrate and tip have a great effect on the enhancement. finally, using five biocompatible materials as a coating in the case of using the Au tip and substrate, which creates the most electric field enhancement, we saw that the use of biocompatible materials greatly reduces the enhancement and the use of these five materials does not differ much from each other. Anyway, the use of a 1 nm layer of biocompatible coating creates a much more favorable effect on enhancement than upper thicknesses.

Formation and manipulation of diatomic rotors at the symmetry-breaking surfaces of kagome superconductors

2024-02-18T09:22:25Z

Artificial molecular rotors and motors hold great promise for functional nanomachines, but constructing diatomic rotors, crucial for these machines, is challenging due to surface constraints and limited chemical design. Here we report the construction of diatomic Cr-Cs and Fe-Cs rotors where a Cr or Fe atom revolves around a Cs atom at the Sb surface of the newly-discovered kagome superconductor CsV3Sb5. The rotation rate is controlled by bias voltage between the rotor and scanning tunneling microscope (STM) tip. The spatial distribution of rates exhibits C2 symmetry, might linked to the symmetry-breaking charge orders of CsV3Sb5. We have expanded rotor construction to include different transition metals (Cr, Fe, V) and alkali metals (Cs, K). Remarkably, designed configurations of rotors are achieved through STM manipulation. Rotor orbits and quantum states are precisely controlled by tunning inter-rotor distance. Our findings establish a novel platform for the atomically precise fabrication of atomic motors on symmetry-breaking quantum materials, paving the way for advanced nanoscale devices.

Compound-tunable embedding potential method to model local electronic excitations on $f$-element ions in solids: Pilot relativistic coupled cluster study of Ce and Th impurities in yttrium orthophosphate, YPO$_4$

2024-02-15T21:05:26Z

A method to simulate local properties and processes in crystals with impurities via constructing cluster models within the frame of the compound-tunable embedding potential (CTEP) and highly-accurate {\it ab initio} relativistic molecular-type electronic structure calculations is developed and applied to the Ce and Th-doped yttrium orthophosphate crystals, YPO$_4$, having xenotime structure. Two embedded cluster models are considered, the "minimal" one, YO$_8$@CTEP$_{\rm min}$, consisting of the central Y$^{3+}$ cation and its first coordination sphere of eight O$^{2-}$ anions (i.~e.\ with broken P--O bonds), and its extended counterpart, Y(PO$_4$)$_6$@CTEP$_{\rm ext}$, implying the full treatment of all atoms of the PO$_4^{3-}$ anions nearest to the central Y$^{3+}$ cation. CTEP$_{\rm min,ext}$ denote here the corresponding cluster environment described within the CTEP method. The relativistic Fock-space coupled cluster (FS RCC) theory is applied to the minimal cluster model to study electronic excitations localized on Ce$^{3+}$ and Th$^{3+}$ impurity ions. Calculated transition energies for the cerium-doped xenotime are in a good agreement with the available experimental data (mean absolute deviation of ca.0.3 eV for $4f{\to}5d$ type transitions). For the thorium-doped crystal the picture of electronic states is predicted to be quite complicated, the ground state is expected to be of the $6d$ character. The uncertainty for the excitation energies of thorium-doped xenotime is estimated to be within 0.35 eV. Radiative lifetimes of excited states are calculated at the FS RCC level for both doped crystals. The calculated lifetime of the lowest $5d$ state of Ce$^{3+}$ differs from the experimentally measured one by no more than twice.

Electron-Photon Exchange-Correlation Approximation for QEDFT

2024-02-15T08:50:36Z

Quantum-electrodynamical density-functional theory (QEDFT) provides a promising avenue for exploring complex light-matter interactions in optical cavities for real materials. Similar to conventional density-functional theory, the Kohn-Sham formulation of QEDFT needs approximations for the generally unknown exchange-correlation functional. In addition to the usual electron-electron exchange-correlation potential, an approximation for the electron-photon exchange-correlation potential is needed. A recent electron-photon exchange functional [C. Schäfer et al., Proc. Natl. Acad. Sci. USA, 118, e2110464118 (2021), https://www.pnas.org/doi/abs/10.1073/pnas.2110464118], derived from the equation of motion of the non-relativistic Pauli-Fierz Hamiltonian, shows robust performance in one-dimensional systems across weak- and strong-coupling regimes. Yet, its performance in reproducing electron densities in higher dimensions remains unexplored. Here we consider this QEDFT functional approximation from one to three-dimensional finite systems and across weak to strong light-matter couplings. The electron-photon exchange approximation provides excellent results in the ultra-strong-coupling regime. However, to ensure accuracy also in the weak-coupling regime across higher dimensions, we introduce a computationally efficient renormalization factor for the electron-photon exchange functional, which accounts for part of the electron-photon correlation contribution. These findings extend the applicability of photon-exchange-based functionals to realistic cavity-matter systems, fostering the field of cavity QED (quantum electrodynamics) materials engineering.