https://arxiv.org/api/nqqP0rgie2ut3UHQ1RLP0BUP3iY 2026-09-10T23:30:01Z 24198 90 15 http://arxiv.org/abs/2609.00223v1 2026-08-31T18:33:32Z

In this work, we thoroughly characterize third- and fourth-harmonic generation through cascaded four-wave mixing in a xenon-filled negative-curvature hollow-core fiber operated under a pressure gradient. The experimental results are supported by both a semi-analytical model and numerical simulations, which accurately reproduce the pressure dependence of the harmonic conversion. We identify the optimum pressure conditions for third and fourth-harmonic generation and experimentally observe the cascaded four-wave-mixing process extending into the vacuum ultraviolet (VUV), up to the sixth harmonic at 172 nm, with the accessible spectral range limited by the available VUV filter.

2026-08-31T18:33:32Z 13 pages, 7 figures Jose Otavio Rosa Frédéric Gérôme Fetah Benabid Jonas H. Osório Jonathas de Paula Siqueira http://arxiv.org/abs/2605.20259v2 2026-08-31T16:50:03Z

Plasmonic Optical Tweezers based on Double Nanohole (DNH) structures are an emerging tool for trapping and interrogating single proteins under physiologically relevant conditions without the need for labeling or tethering. Nevertheless, their current performance is hindered by low signal-to-noise ratios for small proteins, fabrication variability, and photothermal instabilities, in part due to the required high laser power. To address these limitations, we present a comprehensive optimization of DNH parameters using parametric simulations and morphological characterization of experimentally fabricated DNHs. This approach ensures that the optimized geometries are experimentally realizable and compatible with established fabrication processes. We evaluate critical structural features, including gap width, gap length, cusp curvature, wedged tapers, adhesion layer and gold layer thicknesses, and the inclusion of pillars inside the nanoholes. By tailoring these variables, we aim to maximize the transmission variation upon trapping single nanoparticles or proteins and the local electric-field enhancement, thereby maximizing the optical force, while minimizing the required optical power. Two optimized DNH designs are proposed and simulated using a heuristic approach and a differential evolution algorithm. Both substantially outperform the reference structure and deliver 6.5- and 22-fold increases in sensitivity and 2.4- and 1.4-fold improvement in electric-field enhancement, respectively. These refinements provide a framework for developing efficient nanostructures to study single-protein dynamics with Plasmonic Optical Tweezers.

2026-05-18T16:43:00Z 40 pages, 15 figures (including Supp. info) Pau Molet Edona Karakaçi Maria Sanz Paz Mariano Barella Michael Mayer http://arxiv.org/abs/2608.30822v1 2026-08-31T14:03:33Z

Spatial control of near-infrared (NIR) emission from hexagonal boron nitride (hBN) would facilitate coupling atomic-scale light sources to photonic structures, yet oxygen-related NIR emitters are generally formed at stochastic locations. Here, we combine single-shot femtosecond laser writing with annealing in an oxygen-rich environment to bias NIR activation toward predefined coordinates in exfoliated hBN. Spectra acquired with 532, 635, and 785 nm excitations show narrow and multipeak emission extending to a wavelength of 1 um. Among the spectra collected at written sites, over 83% under 785 nm excitation and 71% under 635 nm excitation contain at least one resolved peak above 810 nm. The emission intensity increases monotonically with writing-pulse energy, suggesting tunability and indicating that the optimum for the single-emitter regime may require lower energies. Band-pass-resolved measurements show zero-delay correlation dips with g2(0) values indicative of single-photon emission but also reveal contributions from the spectral background. Spectrally resolved time series under 785 nm excitation show persistent bands over the recorded intervals as well as intermittent emission above 900 nm. This approach demonstrates NIR-emitter activation at predefined sites while identifying residual off-site activation and spectral multiplicity as the principal targets for further optimization.

2026-08-31T14:03:33Z Tadas Paulauskas Vakaris Silys Edgaras Markauskas Julius Janusonis Ifra Bibi Skirmantas Kersulis Danielis Rutkauskas Marek Maciaszek http://arxiv.org/abs/2608.30729v1 2026-08-31T13:03:19Z

We derive bounds on manipulating partially coherent microwaves with programmable scattering systems. We first consider the concentration of power from a partially coherent input into a single output port and derive a prototype-aware bound by combining multiport network theory (MNT) with semidefinite relaxation (SDR). We then address general coherency-matrix synthesis, deriving architecture-independent bounds on fidelity and useful strength, prototype-specific scalar refinements thereof, and fully prototype-aware SDR bounds on the useful-strength--fidelity Pareto frontier. The prototype-aware formulations account for mutual coupling, loss, discrete tunability, and static scattering. We evaluate the bounds on four experimental RIS-parametrized MIMO systems with up to 100 1-bit-programmable elements, using proxy-MNT models estimated from measurements. The resulting bounds are generally tight compared with feasible discrete-optimization outcomes. Interestingly, for coherency synthesis, the simpler bounds can in some cases be tighter than the fully prototype-aware bounds, highlighting their complementarity. Our results provide certified limits for wave-domain processing and harvesting of partially coherent microwaves.

2026-08-31T13:03:19Z 15 pages with 3 figures Philipp del Hougne http://arxiv.org/abs/2608.22737v2 2026-08-31T12:00:03Z

We investigate the duty-cycle-dependent atomic response under full-depth intensity pulse-width modulation in Bell--Bloom optical pumping. A time-domain Bloch model explicitly resolves the pump-on/off spin dynamics, yielding piecewise analytical transient solutions and a periodic steady-state description without cycle averaging or harmonic truncation. An extended free-induction-decay method independently determines the effective dark and pump-on transverse-relaxation rates, $W_0$ and $W$. The predicted lock-in responses agree well with experimental results. We find that for each Larmor frequency $ω_0$, the slope is maximized at a finite pump rate that increases with $ω_0$. These results provide a practical framework for sensitivity-oriented optimization of the duty cycle and pump rate in PWM-driven atomic magnetometers.

2026-08-24T02:54:26Z Ying-Hao Ye Ling-Yan Hu Dui-Gao Yi Zhi-Fei Yu Bing Chen http://arxiv.org/abs/2608.30626v1 2026-08-31T11:33:52Z

The initial conditions of a deterministic nonlinear system affects the attained asymptotic solutions. This is a problem when the nonlinear behaviour is achieved by active control synthesis, and the initial conditions are not accessible for pre-constraining. Meanwhile, the generalized impedance control is recently gaining increasing attention in acoustics, and has been enlarged to achieve nonlinear mechanical responses of Electroacoustic Resonators at low excitation levels. Nevertheless, as the initial conditions of Electroacoustic Resonators are hardly accessible, the equilibrium points actually showcased by the synthetic nonlinear dynamics are not advantageous for noise attenuation in cavities excited by realistic noise sources. In this paper, we propose a control strategy being able to attain the desired equilibrium points, due to the definition of an exosystem characterized by a desired nonlinear impedance and a synthetic external excitation. The exosystem dynamics is integrated in real time and its response is enforced in the actual system (in our case, the Electroacoustic Resonator), by a model-inversion feedforward strategy. The proposed algorithm is implemented in the Electroacoustic Resonator, and is validated both numerically and experimentally. In particular, the experimental testing is conducted both in a quasi-open acoustic environment, and in enclosed cavities for acoustic mode attenuation.

2026-08-31T11:33:52Z Maxime Morell Emanuele De Bono Emmanuel Gourdon Manuel Collet Alireza Ture Savadkoohi Claude-Henri Lamarque http://arxiv.org/abs/2605.23971v3 2026-08-31T09:55:06Z

This work presents a physics-guided machine-learning framework for carbon monoxide concentration inference from experimentally measured resistance transients of a mixed-phase SnO-SnO$_2$ material gas sensor exhibiting temperature-dependent p-n switching behavior. Cycle-level transient responses are represented through physically interpretable descriptors and complemented by compact fast Fourier transform (FFT) and discrete wavelet transform (DWT)-based summaries. Using leakage-aware grouped cross-validation, we study both multi-class concentration classification and continuous concentration regression for the p-type and n-type sensing regimes separately. Across both regimes, fused features provide the strongest overall performance, while the physics-guided descriptor block remains highly competitive, indicating that the dominant concentration information is already encoded in physically meaningful transient dynamics. The p-type branch shows the best concentration-class discrimination, with the fused Random Forest classifier reaching approximately $96.5\%$ accuracy, whereas the n-type branch yields the best quantitative concentration estimation, with the fused Random Forest regressor achieving an MAE$\approx 1.48$ ppm and an R$^2$ $\approx 0.992$. These results reveal a clear dual-regime behavior: p-type sensing is particularly favorable for classification, whereas n-type sensing is more favorable for high-fidelity regression. More broadly, the study demonstrates that leakage-aware, cycle-level, physics-guided machine learning can extend conventional gas-sensing analysis beyond single-response metrics while preserving physical interpretability

2026-05-13T10:37:32Z 9 pages, 18 figures IEEE Sensors Journal, 2026 Sani Biswas Preetam Singh Amit Kumar Gangwar 10.1109/JSEN.2026.3723678 http://arxiv.org/abs/2608.30501v1 2026-08-31T09:30:57Z

In Metamorphosis of Plants (1790), Goethe traced diverse plant organs to transformations of a common leaf-like structure -- a principle modern mechanics attributes to two material ingredients: non-uniform in-plane strain from differential growth or shrinkage, and spatially patterned stiffness. Here we translate this principle into a synthetic fabrication framework called Polymer Membrane Tensegrity (PMT). A flat elastomeric film swollen with a second monomer is selectively UV-cured through a liquid-crystal display (LCD) photomask in a single-side digital photopatterning step, producing rigid rods embedded in a soft, shrinkable membrane. After the unreacted monomer is extracted with a solvent and the film is dried, the membrane shrinks far more than the rods, generating a ~50% in-plane strain differential and a ~2,000-fold modulus contrast -- conditions under which the contracting membrane is held in tension by mutually unconnected rods, a tensegrity-inspired arrangement within a single film. An origami-based inverse design algorithm computes the rod layout that morphs the film into a prescribed 3D surface. We demonstrate PMT on a dome, a hyperbolic surface, and a gyroid unit cell -- positively and negatively curved targets -- reproducing all three with mean deviations of 1.0-2.1% of the target size; perimeter curve optimization halves the mean deviation of the gyroid. Because patterning occurs on one side only, PMT eliminates the front-to-back alignment demanded by bilayer methods, offering a scalable route from flat polymer films to freeform 3D surfaces.

2026-08-31T09:30:57Z 10 pages, 4 figures. Supplementary Information included as ancillary file Shuto Ito Yuta Shimoda Haruka Fukunishi Mikihiro Hayashi http://arxiv.org/abs/2608.25051v2 2026-08-31T08:59:01Z

Raman spectroscopy is commonly reduced to molecular fingerprint sensing, neglecting Raman intensities. Atomic Raman intensity contributions trace Raman intensities back to their microscopic origin and act as local electronic structure descriptors; however, a both physical but intuitive framework is missing by now. Therefore, in this work, we combine the two main lines of decomposing Raman intensities: atomic Raman tensors and atomic Raman Intensity Densities (RIDs). The former are used to define atomic Raman intensities which quantify both the magnitude and the phase of each atom's contribution to the global Raman signal, demonstrating that weak Raman bands may arise from destructive interference of individually strong atomic contributions. The latter build on redefined atomic Raman Polarizability Densities, RPDs, and are defined in analogy to our atomic Raman intensities. They show how the motion of an individual atom modulates the polarizability of the entire molecule. Atomic RIDs thus show local interferences of different atomic contributions. They integrate to the atomic Raman intensities bridging the two main lines. Additional (atomic) Charge Density Differences (CDDs) extend the RIDs to electronic structure effects. Finally, we apply the methodology to experimental surface-enhanced Raman spectra of substituted 2-mercaptobenzothiazole derivatives and discuss substituent-induced Raman intensity changes. We show that such changes do not necessarily stem from globally altered polarizabilities but from changes in the relative phase of atomic contributions. However, this method is not limited to SERS but widely applicable to all kinds of Raman, SERS or picocavity TERS experiments offering a basis for atomically resolved investigations of molecular processes such as adsorption, catalysis, and chemical reactions

2026-08-25T18:40:56Z Marc Bröckel Johannes Gierschner Alfred J Meixner Kai Braun http://arxiv.org/abs/2608.30401v1 2026-08-31T07:54:08Z

The classical Bloch equation forms the foundation of magnetic resonance theory but may be insufficient to capture the complex effective dynamics observed in heterogeneous materials such as biological tissue. Here an effective-medium strategy is proposed to describe magnetic resonance dynamics from observations at macro-scale (order 1 mm$^3$). In this framework, the classical Larmor torque is retained while the relaxation term is replaced by a general nonlinear field (i.e. the effective medium term). This field is required to preserve key physical properties, including rotational symmetry, global stability of thermal equilibrium, and dissipativity. These requirements lead to a complete characterization of admissible relaxation fields and provide a constructive framework for generating nonlinear relaxation models. The resulting theory recovers classical Bloch dynamics as a special case and provides a principled foundation for effective-medium descriptions of magnetic resonance phenomena.

2026-08-31T07:54:08Z Alessandro Sbrizzi Miha Fuderer Ray Sheombarsing http://arxiv.org/abs/2608.30360v1 2026-08-31T07:18:13Z

The sound speed profile in the deep Arctic Ocean causes the surface layer to form a normal mode waveguide. When the depth of the sound source or receiver is near a node of the eigenfunction, the source cannot excite the mode, or the receiver cannot detect it, resulting in the modal amplitude at the receiver being approximately zero. This manifests as a dispersion interruption in the dispersion structure, which can be observed through time-frequency analysis of the received acoustic signal. Based on the interruption frequency identified from the received signal, combined with the relationship between node depth and modal frequency calculated from the ocean sound speed profile, the source depth can be estimated if the receiver depth is known. The phenomenon of dispersion interruption and the method of estimating source depth have been validated through simulations and experiments.

2026-08-31T07:18:13Z Weng Jinbao Laboratory of ocean acoustic and remote sensing, Third Institute of Oceanography, Ministry of Natural Resources, Xiamen, China Yang Yanming Laboratory of ocean acoustic and remote sensing, Third Institute of Oceanography, Ministry of Natural Resources, Xiamen, China Chen Benqing Laboratory of ocean acoustic and remote sensing, Third Institute of Oceanography, Ministry of Natural Resources, Xiamen, China Xu Dewei Laboratory of ocean acoustic and remote sensing, Third Institute of Oceanography, Ministry of Natural Resources, Xiamen, China Zhou Hongtao Laboratory of ocean acoustic and remote sensing, Third Institute of Oceanography, Ministry of Natural Resources, Xiamen, China http://arxiv.org/abs/2608.09371v2 2026-08-31T05:08:16Z

Hexagonal MnTe is a prototypical semiconducting altermagnet whose properties are heavily influenced by intrinsic disorder, yet how the resulting diverse transport regimes shape its magnetotransport behavior remains to be clarified alongside the role of relativistic spin-orbit coupling (SOC). Here, we present a systematic study of the anisotropic magnetoresistance (AMR), planar Hall effect (PHE), and nonlinear transport in MnTe bulk single crystals. Below the Néel temperature (TN ~ 304 K), the emergence of high-order harmonics in AMR and PHE within the high-temperature metallic regime reveals the interplay of magnetic order, crystalline symmetry, and SOC. At relatively lower temperatures, the disappearance of higher-order symmetries coincides with a transport crossover into the hopping conduction regime, suggesting that carrier localization diminishes the transport sensitivity to the Fermi-surface topology. In addition, we detect distinct second-order nonlinear Hall signals, providing evidence for a macroscopic inversion-asymmetric response in altermagnetic MnTe. Extending the investigations into the localized regime provides key insights into the subtle role of disorder and SOC in macroscopic charge transport. Our work thus underscores the necessity of exploring magnetotransport across diverse conducting regimes to comprehensively understand altermagnetic properties.

2026-08-10T09:49:13Z Frontiers of Physics,2026 Wei Zhou Zhifeng Xue Yunxing Li Nannan Tang Ye Tao Dingyong Zhong Jiawei Luo Donghui Guo Huichao Wang 10.15302/frontphys.2027.025204 http://arxiv.org/abs/2608.27765v2 2026-08-31T02:42:19Z

This work introduces a frequency synchronization circuit model for analog vector-matrix multiplication in the frequency domain. The frequency synchronization is implemented by coupling oscillators through all-to-all connections. Each oscillator is implemented using complementary cross-coupled transconductance pairs and RC high-pass filters. In this work, the frequency synchronization is achieved not only using oscillators alone but also through a configuration in which oscillators and resonator models (i.e., MEMS/NEMS resonators) are combined. While addressing the frequency synchronization of all the coupled oscillators, a partial synchronization is also discussed by controlling the coupling strength of a selected subset of oscillators. This frequency synchronization analysis focuses on the small-signal analysis using analog circuit and resonator models, thereby enabling an understanding of the synchronized frequency defined by the parameters of the analog circuit and resonator models.

2026-08-27T22:57:16Z 26 pages, 14 figures, technical reports Taeju Lee Scott T. Habermehl Timothy W. Caplice Michael L. Roukes Philip X. -L. Feng Kenneth L. Shepard http://arxiv.org/abs/2608.30146v1 2026-08-31T01:59:14Z

Synthetic complex frequency waves (CFWs) enhance spectral and spatial resolution by compensating loss through virtual gain. This approach is particularly useful in nano-photonics where loss is intrinsically linked to strong field confinement and system size. Here, we apply CFWs to metasurfaces composed of Fano-resonant plasmonic antennas with lithographically tunable coupling between the weak and strong coupling regimes and where loss may be reduced to the Drude damping limit. We quantitatively assess the impact of the virtual gain to find that, while reducing loss, internal coupling rates remain invariant. While the exceptional point associated with strong light-matter coupling is invariant under virtual gain, the cooperativity of Fano interference is enhanced. When the metasurfaces are functionalised with a molecular monolayer, CFWs are thus able to reveal a molecule's vibrational modes, even when obscured by loss, and allow direct extraction of the plasmon-molecule coupling strength. We thus use CFW analysis as a quantitative tool for revealing and assessing light matter-coupling.

2026-08-31T01:59:14Z 5 figures Toby Severs Millard Xiaofei Xiao Mayela Romero-Gómez Tom Aktaş-Vincent Nathaniel J. Huáng Chris C. Phillips Stefan A. Maier Olga Kazakova Rupert F. Oulton http://arxiv.org/abs/2608.30032v1 2026-08-30T20:41:39Z

In recent years, kirigami metamaterials have been widely studied and applied in science and engineering. While various two- and three-dimensional kirigami design methods have been developed, most of them are only applicable to a limited class of kirigami structures. In this work, we develop a unified framework for kirigami design that encompasses a wide range of 2D-to-2D, 2D-to-3D, and 3D-to-3D shape-morphing effects, as well as additional geometric and physical properties such as compact reconfigurability and rigid deployability. In particular, by reformulating the design task as a length-based constrained optimization problem and solving it simultaneously for multiple target states of the kirigami structure, our unified design framework enables greater design flexibility and stronger theoretical support. Experimental results with a wide range of shape-morphing effects are presented to demonstrate the effectiveness of our framework. We further present a rigorous theoretical analysis of several key aspects of kirigami design, covering inertia transposition, aspect-ratio law, and angle defects, thereby elucidating important design rules and limitations. Altogether, our work paves a new way for the design of shape-morphing mechanical metamaterials.

2026-08-30T20:41:39Z Qinghai Jiang Gary P. T. Choi