https://arxiv.org/api/IQbyRdNW17yqZt3NNnAYkSHeh7o 2026-09-10T22:26:35Z 24198 75 15 http://arxiv.org/abs/2609.02061v1 2026-09-02T03:39:59Z

Surface enhanced Raman spectroscopy (SERS) in the ultraviolet (UV) region offers important advantages for biomolecular detection, including resonance enhancement and reduced fluorescence interference. However, the development of UV SERS substrates that combine low cost, reproducibility, and chemical stability remains challenging. Here, we employ a dry synthesis approach to fabricate nanoporous Cu and copper oxide (CuO) films on silicon substrates and systematically evaluate their UV SERS performance using adenine as a Raman reporter under 325 nm excitation. Among the substrates investigated, nanoporous Cu exhibits the strongest enhancement, enabling adenine detection down to 10 microM. In contrast, no detectable adenine Raman signal is observed under 532 nm excitation, indicating that the enhancement is dominated by a UV induced chemical, charge transfer mechanism rather than conventional electromagnetic enhancement. The Cu substrates further enable the UV Raman spectroscopy of streptavidin, as a test protein, and, more interestingly, the discrimination between L and D tryptophane based solely on differences in UV SERS intensity, without chiral selectors or additional surface functionalization. By varying the substrate rotation speed during metal evaporation, the enantioselective response can be tuned, yielding L over D intensity ratios from 1.10 to 2.35 and demonstrating the critical role of substrate morphology in chiral discrimination. The dry synthesized nanoporous films provide a simpler, scalable, and ligand free fabrication strategy while offering additional capability for enantioselective detection. These findings establish dry processed nanoporous Cu films as promising platforms for UV-SERS biosensing and label free chiral analysis.

2026-09-02T03:39:59Z Huaizhou Jin Anastasiia Sapunova Yanqiu Zou Ali Douaki German Lanzavecchia Nicolo Maccaferri Costantino De Angelis Roman Krahne Zhenrong Zheng Shangzhong Jin Denis Garoli http://arxiv.org/abs/2609.01703v1 2026-09-01T17:27:41Z

Multidimensional optical microscopy - extracting 3D location, orientation, and spectral information from nanoscale emitters - is key to modern nanoscience. However, this multidimensional capability requires complex instrumental setups, demanding exceptional stability and specialized expertise in optics. Here, we overcome these barriers by introducing Double Refraction Microscopy (DRM), a passive imaging method providing a straightforward pathway to multidimensional super-resolution imaging. Based on bifocal imaging via a birefringent microscope slide, DRM splits nanoprobe light into a characteristic double image encoding 3D location, orientation, and spectral signature, while requiring zero hardware modifications to standard wide-field microscopes. To showcase its robustness, we implement DRM across three distinct slides of varying materials and thicknesses, calibrating 3D localization with 450-nm nanoparticles and demonstrating high orientation sensitivity using polarization-controlled emitters. Furthermore, we confirm spectral readout using a pinhole array acting as a grid of point emitters back-illuminated at various wavelengths to generate distinct spectral signatures. Finally, we showcase practical utility by performing a two-colour 3D localization measurement within a $10\,μ\text{m}$ gap, utilizing the single optical pathway of a standard epi-fluorescence microscope. Ultimately, DRM provides the missing optical hardware simplicity to complement established computational tools, promising to transfer advanced super-resolution capabilities from specialized facilities to every laboratory bench.

2026-09-01T17:27:41Z 25 pages manuscript (double-spaced, single-column), 6 figures, plus 3 pages Supplementary Information Jörg König Institute of Micro- and Nanotechnologies, Technische Universität Ilmenau, Germany Institute of Thermodynamics and Fluid Mechanics, Technische Universität Ilmenau, Germany Christian Cierpka Institute of Micro- and Nanotechnologies, Technische Universität Ilmenau, Germany Institute of Thermodynamics and Fluid Mechanics, Technische Universität Ilmenau, Germany http://arxiv.org/abs/2609.01539v1 2026-09-01T17:05:37Z

A central question in physical inference is whether strongly constrained dynamical systems can realize accurate input--output maps through their own finite-time evolution. We study this question in Kuramoto phase networks, whose deterministic dynamics form an input-conditioned gradient flow and whose predictions are read directly from output oscillators. As a constructive training approach, we develop a two-stage teacher--student procedure. A neural teacher is first converted into an explicit phase trajectory whose terminal oscillator activations reproduce the teacher outputs, and the Kuramoto parameters are trained by matching the student vector field along this prescribed path. Because accurate teacher-forced path matching does not ensure accurate autonomous inference, we then differentiate through the autonomous finite-time rollout and directly align its terminal output with the neural target. The resulting oscillator system, with $74$ oscillators, reaches mean test accuracies of $96.711\%$ on MNIST and $86.399\%$ on Fashion-MNIST. This capability persists across neural-teacher architectures, matched system sizes, thermal perturbations, and integration-grid refinement. Together, these results provide a constructive demonstration that a strongly constrained, small-sized Kuramoto gradient-flow system can be trained for high-accuracy finite-time inference through a direct oscillator readout.

2026-09-01T17:05:37Z Yi Cheng Zongli Lin http://arxiv.org/abs/2603.22827v5 2026-09-01T16:23:01Z

Wafer-to-wafer (WxW) bonding is a key enabler for three-dimensional integration, including hybrid bonding for fine-pitch Cu--Cu interconnects. During bonding, wafer deformation and the air entrapped between the wafers interact through a strongly coupled, time-dependent fluid--structure interaction (FSI) that can produce non-intuitive bonding dynamics and process sensitivities. This paper develops a mathematically consistent reduced-order model for WxW bonding by deriving a Kirchhoff--Love plate equation for wafer bending from three-dimensional linear elasticity and coupling it to a Reynolds lubrication equation for the inter-wafer air film. The resulting nonlinear plate--Reynolds system is discretized and solved monolithically in the high-performance FEniCSx framework using a $C^0$ interior-penalty formulation for the fourth-order plate operator, standard continuous Galerkin discretization for the pressure field, implicit time integration, and a Newton solver with automatic differentiation. Simulations reproduce experimentally reported wafer displacement histories for multiple initial gaps and verify force equilibrium at the bond front, where the Reynolds pressure acts as an effective contact reaction. Parametric studies reveal nonlinear, and in some cases non-monotonic, sensitivities of bonding-front kinetics to the initial gap, air viscosity, and interfacial energy, providing actionable trends for process optimization.

2026-03-24T06:04:00Z Kamalendu Ghosh Bhavesh Shrimali Subin Jeong http://arxiv.org/abs/2609.01302v1 2026-09-01T14:30:14Z

We studied orbital-torque generation in Cr(10nm)/Gd($t_{\mathrm{Gd}}$)/Co(3nm)/TaO$_x$ and the inverted stack Co(3nm)/Gd($t_{\mathrm{Gd}}$)/Cr(10nm) with $t_{\mathrm{Gd}}$ from 0 to $5\,\mathrm{nm}$ by combining electrical harmonic Hall measurements with magnetometry. A detailed understanding of the magnetometric data is obtained by cross-sectional chemical composition mapping. The data show temperature-dependent magnetic compensation points, while elemental analysis provides evidence of pronounced intermixing, in particular of Gd and Co layers. From the harmonic Hall dataset we extract the damping-like (DL) and field-like (FL) torque efficiencies normalized to the applied electric field, $ξ_{\mathrm{DL}}^{E}$ and $ξ_{\mathrm{FL}}^{E}$, and interpret their dependence on the Gd interlayer thickness using two different descriptions: (i) a naive-layer model and (ii) an alloy model that accounts for interfacial mixing. Notably, upon reversing the stack order, the FL contribution changes sign, whereas the DL contribution does not change sign within the harmonic Hall measurements.

2026-09-01T14:30:14Z Tiago de Oliveira Schneider Michel Heidkamp Luana Caron Inga Ennen Matthias Opel Alexey Arzumanov Lambert Alff Markus Meinert http://arxiv.org/abs/2608.13813v2 2026-09-01T10:18:14Z

Transient thermal grating (TTG) experiments provide a powerful means of probing material properties and resolving their dynamics at small spatio-temporal scales through the temporal response to a spatially periodic excitation. However, quantitative interpretation of the measured transient requires a forward model that consistently connects energy deposition, subsequent transport, and detection within the finite space-time window of the experiment, for which such a formulation is still lacking in TTG. Here, we formulate a continuum, operator-based TTG forward model in which the physical processes from energy deposition to detection of the evolving spatial mode are treated within a unified transfer-function framework. Thermal transport dynamics is represented by a temporal memory kernel, allowing unresolved relaxation processes to be incorporated at the scale of experimental observability without imposing an a priori microscopic transport mechanism. The formulation provides a basis for inferring effective material properties and the dynamics resolved within the experimental window, which can subsequently be related to material-specific microscopic degrees of freedom and their interactions. In addition, analysis of the resulting TTG transients shows that the observability of flux memory is not equivalent to the presence of oscillations in the measured response. Oscillations provide a clear signature when finite flux-relaxation dynamics becomes resolved on the experimental time scale, whereas their absence does not imply the Fourier limit. Memory can instead remain observable through non-oscillatory modifications of the transient shape and characteristic time scales.

2026-08-13T22:53:12Z 27 pages, 6 figures Slobodanka Galovic Steva Jacimovski http://arxiv.org/abs/2509.21246v2 2026-09-01T09:10:18Z

Inverse photoelectron spectroscopy (IPES) is a powerful technique for probing the unoccupied electronic states of materials. It can be regarded as the inversion process of photoelectron spectroscopy (PES), which examines the occupied states. Recently developed low-energy inverse photoelectron spectroscopy (LEIPS) can significantly advance the study of unoccupied states, owing to minimal sample damage and suppressed dark counts compared to conventional IPES. However, the instrumental resolution remains at 0.2 eV, which is one order of magnitude lower than that of PES. Spectral broadening caused by the low instrumental resolution often results in overlapping peaks. Peak separation is therefore crucial in the analysis of LEIPS spectra. In this study, we compared three peak separation methods-second derivative, curve fitting, and deconvolution. These methods were applied to modeled and experimental LEIPS spectra of the lowest unoccupied molecular orbital-derived band of pentacene, which consists of two splitting peaks due to the two inequivalent molecules in the unit cell. We systematically and quantitatively evaluated the performance of each method in terms of analysis parameters and discussed its robustness to noise as well as its peak separation capabilities as a function of peak energy spacing and intensity ratio. This work offers a practical framework for peak separation in LEIPS, with extensions to PES and a wide range of spectroscopies.

2025-09-25T14:39:26Z 16 pages, 7 figures. Published in Review of Scientific Instruments Rev. Sci. Instrum. 97, 023906 (2026) Ryotaro Nakazawa Haruki Sato Hiroyuki Yoshida 10.1063/5.0303140 http://arxiv.org/abs/2605.12663v3 2026-09-01T09:07:34Z

Quantum emitters in hexagonal boron nitride (hBN) have emerged as a promising solid-state platform for quantum technology applications. However, a persistent challenge in the field is the unclear origin of many observed emission lines, particularly in the visible range, which can be difficult to distinguish from signals arising from organic or process-induced contamination during sample preparations and handling. This ambiguity limits both the reproducibility of emitter generation and the reliable identification of truly intrinsic quantum defects. This work provides a step-by-step framework to assess whether quantum emitters in electron-irradiated hBN are associated with organic contaminants introduced during sample preparation. We employ hyperspectral imaging, thermal annealing, and oxygen plasma etching to investigate the origin of the green-yellow emitters in electron-irradiated hBN. The combined results not only rule out organic contamination as the source of emission but also provide insight into the spectral variability, thermal stability, and vertical localization of the emitters generated in electron-irradiated hBN that was created without any pre- or post-processing. In addition, our experiments demonstrate the feasibility of creating stable emitters in hBN with thicknesses below 10 nm. These findings provide practical guidance for the identification and controlled implementation of hBN-based single-photon emitters in quantum photonic devices.

2026-05-12T19:10:44Z Mouli Hazra Anna Rupp Mohammad N. Mishuk Josefine Krause Anand Kumar Julien Chénedé Mingi Kang Bayarjargal N. Tugchin Marijn Rikers Isabelle Staude Thomas Pertsch Alexander Högele Tobias Vogl 10.1002/advs.77322 http://arxiv.org/abs/2510.00865v3 2026-09-01T09:02:46Z

Accurate determination of low-density electronic states in the bandgap (in-gap states) is crucial for optimizing the performance of organic optoelectronic devices. Derivative photoelectron yield spectroscopy (PYS) is employed to estimate the density of states (DOS) of in-gap states. However, low-energy photons in PYS can generate excitons and anions in organic semiconductors, raising questions about whether derivative PYS spectra truly represent the DOS. We revealed that PYS signals originate from the single-quantum external photoelectron effect (SQEPE) of in-gap states, SQEPE of the singly occupied molecular orbital (SOMO) of anions, and the biphotonic electron emission (BEE) effect via exciton fusion. Because BEE signals mask the DOS contribution, derivative PYS misestimates the DOS of in-gap states. In contrast, constant final state yield spectroscopy (CFS-YS) reliably determines the DOS by separating these components. For a tris(8-hydroxyquinoline) aluminum (Alq3) film, CFS-YS revealed the DOS of in-gap and SOMO states over six orders of magnitude, clarifying why the Alq3 layer works effectively in organic light-emitting diodes. In the devices, BEE can act as carrier-generation and degradation processes, and CFS-YS can also probe it. We provide the practical guidelines of low-energy photon measurements for DOS determination, such as measurements of photon-flux dependency.

2025-10-01T13:14:52Z 17 pages, 7 figures. Published in The Journal of Physical Chemistry C J. Phys. Chem. C (2026) 130 (9): 3418-3427 Ryotaro Nakazawa Masaya Kitaoka Ryota Kaimori Manato Tateno Runa Hoshikawa Yuya Tanaka Hisao Ishii 10.1021/acs.jpcc.5c07058 http://arxiv.org/abs/2609.00933v1 2026-09-01T08:54:25Z

Cellular automata conform a set of computational models which evolve with a reduced set of simple rules, yet still are able to show extremely complex emergent phenomena such as fractals and universal computation. Despite their apparent simplicity, they have shown great potential in simulating natural systems and solving challenging computational tasks such as classification and image generation. Instead of implementing cellular automata purely at the software level, it is desirable to design novel analog computing platforms that physically evolve following the automata's underlying rules, thereby reducing power requirements and latency. Here, we introduce an optical extreme learning machine for the simulation of a wide range of cellular automata. Our system operates in free space, and uses a spatial light modulator to encode the evolution rules of the system, while coherent wave propagation performs the corresponding computations. Our results demonstrate a simple, fully-programmable, cost and power efficient, and easy to build and align platform for the implementation of a wide range of complex computational systems such as elementary cellular automata, Conway's Game of Life, and two-dimensional Turing machines.

2026-09-01T08:54:25Z 17 pages, 6 figures, preprint Elena Moreno Fernando Soldevila Daniel Torrent http://arxiv.org/abs/2607.28492v2 2026-09-01T07:47:36Z

Conventional X-ray fluorescence (XRF) and X-ray diffraction (XRD) analysis applied to the investigation of ancient metal salts used as pigments and/or therapeutics provide bulk average compositions in two stand-alone data sets; however, major elements aside, these two sets cannot inform on the spatial distribution of one with respect to the other. To address this issue, we present here a multimodal approach incorporating spatially resolved XRF, XRD and nanoscale X-ray imaging applied to the analysis of archaeological and experimental samples of synthetic lead carbonate (PbCO3 - Greek psimythion); psimythion was used in antiquity as a cosmetic and/or a therapeutic for external applications. The experimental sample was produced according to a well-documented recipe dated to the 4th century BCE. In this paper we demonstrate that by using a multimodal approach we can confidently assign trace elements to individual crystalline or to infer the existence of non-crystalline phases. Although the assignment of an element to a phase (i.e. the location) is now possible, the origin underlying it (i.e. the mechanism) is not always clear. Trace elements do not 'control' chemical/mineralogical composition, but they can influence it. Our approach is particularly suited to following changes in the artefact's chemical/mineralogical profile, from its manufacture, to use and burial, to excavation and conservation.

2026-07-30T16:41:20Z Sumera Rehman Spyridon Panagiotopoulos Georgios E Christidis Athena Athanassiadou Alessandro Olivo Effie Photos-Jones Silvia Cipiccia http://arxiv.org/abs/2608.09382v2 2026-09-01T04:21:58Z

Electromagnetic inverse scattering is a nonlinear and ill-posed computational imaging problem, where accurate reconstruction is challenging due to measurement limitations, noise, and high computational costs, especially for 3-D imaging. Although physics-driven neural networks (PDNNs) reduce the dependence on labeled training data, existing accelerated PDNN frameworks often rely on preliminary reconstruction-based region selection, which may introduce instability when the selected region is inaccurate. In this paper, a coordinate-residual physics-driven neural network (CRPDNN) is proposed for 3-D electromagnetic inverse scattering. CRPDNN represents the unknown complex contrast distribution using normalized spatial coordinates and a residual convolutional network, whose parameters are optimized by enforcing consistency between the measured and model-predicted scattered fields. Unlike existing subregion-accelerated PDNN approaches, CRPDNN does not require a preliminary reconstruction, thereby avoiding dependence on its accuracy. For the reported noise-free 3-D synthetic cases, CRPDNN achieves an average relative error of 2.10\%, compared with 7.97\% for CSI and 3.99\% for $L_{2/3}$-FBE-WCIE, while providing approximately 5.5- and 12.1-fold speedups over the two baselines, respectively. Additional 2-D comparisons further demonstrate its stability and computational efficiency relative to existing PDNN frameworks. CRPDNN also maintains reliable reconstruction performance under noisy measurements, and the 3-D Fresnel experiments further indicate its potential for practical imaging applications.

2026-08-10T09:57:57Z Yutong Du Zicheng Liu Bo Qi Yali Zong Peixian Han http://arxiv.org/abs/2603.07701v3 2026-09-01T04:15:34Z

We report the first realization of a fractional topological phase in a fully unitary, noninteracting discrete-time quantum walk implemented on finite cyclic graphs. Using a single-coin split-step cyclic quantum walk (SCSS-CQW), we uncover topological phenomena that are inaccessible within conventional cyclic quantum-walk dynamics. The protocol enables controlled engineering of quasienergy spectra, flat bands, and topological phase transitions through the step-dependency parameter and coin-rotation angle. We show that cyclic graphs with even and odd numbers of sites exhibit qualitatively different band structures, while rotational flat bands arise exclusively in $4n$-site cycles; a general analytic condition for their emergence is derived. The SCSS-CQW produces fractional winding numbers $\pm \frac{1}{2}$ (Zak phases $\pm \fracπ{2}$), in sharp contrast with the integer invariants in standard cyclic quantum walks. These fractional invariants lead to an unconventional bulk-boundary correspondence and support protected {zero energy} edge states beyond the usual integer topological classification. In the step-dependent protocol, transitions between distinct fractional winding sectors generate robust edge modes pinned at zero quasienergy. Numerical simulations show that these states remain stable in the presence of both dynamic and static coin disorder as well as phase-preserving perturbations, while survival-probability analysis demonstrates their long-time persistence. Requiring only a constant number of detectors independent of the evolution time and fewer operators, the proposed scheme offers a minimal-resource and experimentally accessible platform for realizing fractional topology, flat bands, and protected zero energy edge states in small-scale synthetic quantum systems.

2026-03-08T15:59:21Z 30 pages, 27 figures, 3 tables Dinesh Kumar Panda Aditi Rath Colin Benjamin http://arxiv.org/abs/2512.24820v2 2026-08-31T22:55:44Z

Nanoscale mechano-optical surfaces enable electronics-free strain sensing, attractive for skin-interfaced devices, yet reported implementations require laser/spectrometer interrogation, negating this advantage. Here, we report electrically passive mechanical transduction of arterial pulsation into diffractive colour shifts read by unmodified smartphone cameras, enabled by a dual-function monolithic poly-dimethylsiloxane (PDMS) film. Using large-area double-sided nanoimprinting, we achieve a strain-sensitive nanophotonic surface on one face of the film and a bio-inspired 3D structural adhesive on the other. We measure strain-dependent optical response and reproduce it in colour-mixing optical simulations. In uniaxial cyclic loading tests, 2% strain produces a 9% RGB-intensity modulation, stable over 1000 cycles. Further, 3D structuring improves adhesive shear strength by 65% on skin over flat PDMS. Hand-held smartphone recordings in humans ($n=13$) resolve sub-beat hemodynamics in agreement with clinical reference (per-beat waveform $ρ=0.94 \pm 0.03$), exceeding established non-invasive techniques such as active reflectance photoplethysmography (PPG), imaging PPG, and piezoelectric pulse-force sensors in simultaneous recordings. Importantly, mechanical transduction at the elastomer--air interface presents an optical cardiovascular monitoring approach agnostic to dermal-melanin, a known PPG confounder. Together, these advances establish camera-readable mechanochromic elastomers as versatile materials platforms for wearable cardiovascular monitoring, point-of-care diagnostics, and electronics-free human-machine interfaces.

2025-12-31T12:14:24Z Advanced Materials (2026), e74512 Torjus Steffensen Vegar Stubberud Emilie S. Hennisen Eryk T. Winogrocki Julia Lövgren Arthur G. S. Torvund Håvard Vestad Nils K. Skjærvold Martin Steinert Angelos Xomalis 10.1002/adma.74512 http://arxiv.org/abs/2609.00271v1 2026-08-31T19:11:01Z

Ultra high field REBCO magnets operate under strongly coupled electromagnetic, thermal and mechanical conditions, where screening currents, localized heating, thermal expansion and Lorentz forces can modify both the structural state and the critical current density of the conductor. In this work, a coupled electromagnetic, thermal and mechanical model is developed for a metal-insulated nested REBCO insert designed for a 40 T class SuperEMFL magnet. The existing electromagnetic formulation resolves the non-uniform screening currents in the REBCO tapes. The thermal model is extended from an explicit Finite Difference Method (FDM) to an implicit Backward Euler scheme with Picard iteration, while a new axisymmetric mechanical FDM solver based on BiCGSTAB is introduced to calculate displacements, strains and stresses in the coil windings and G10 spacer regions. Thermal expansion and Lorentz force contributions are included, and the calculated longitudinal mechanical strain is coupled back to the electromagnetic model through a strain dependent critical current density, which also depends on temperature, magnetic field, and its orientation. A literature-informed Parabolic-Weibull model is used to model reversible and irreversible strain degradation of the REBCO conductor. The numerical methods are benchmarked, and the resulting framework provides a computationally efficient approach for investigating temperature gradients, thermo-mechanical stresses, strain-dependent critical current degradation and quench behaviour in full scale nested high field REBCO magnets.

2026-08-31T19:11:01Z Anang Dadhich Nikola Jerance Tara Benkel Philippe Fazilleau Enric Pardo