Livestock, Methane and Climate

2026-01-26T14:32:44Z

Methane emissions by livestock have a negligible effect on Earth's temperature. For example, killing all of the approximately 1.6 billion cattle on Earth in the year 2025, when this paper was written, would only reduce atmospheric methane concentrations enough to change the temperature by -0.04 C. Killing all 1.3 billion sheep would lead to a temperature change of -0.004 C. New Zealand's pledge to reduce methane emissions of their livestock by 14% to 24% from those in the year 2017 would change the temperature by -0.000005 to -0.000008 C, far too small to measure. These are maximum temperature savings where methane emissions from domestic livestock are not replaced by other sources (such as wild ruminants and termites) during the inevitable rewilding of managed grasslands and rangelands.

A strictly geostrophic product of sea-surface velocities from the SWOT fast-sampling phase

2026-01-26T06:09:29Z

While geostrophy remains the simplest and most practical balance to extract velocity information from sea-surface height anomaly (SSHa), confusions remain within the oceanographic community to what extent this balance can be applied to altimetric observations with the launch of the Surface Water and Ocean Topography (SWOT) satellite. Given the limited temporal resolution of SWOT, many studies have resorted to claiming that the spatially filtered SSHa fields correspond to the geostrophic component. This introduces the ambiguity of which spatial scale to choose. Here, we build upon the recent developments in internal tide (IT) corrections (Yadidya et al., 2025) and apply a dynamic mode decomposition (DMD)-based method introduced by Lapo et al. (2025) to robustly extract the geostrophic component associated with sub-inertial frequencies from the SWOT one-day-repeat orbit; we distribute the global dataset as a public good. We provide the joint probability density function (PDF) of vorticity and strain, and spectra of SSHa at a few cross-over regions.

Distance-Independent Atmospheric Refraction Correction for Accurate Retrieval of Fireball Trajectories

2026-01-25T18:11:32Z

Accurate determination of fireball direction is essential for retrieving trajectories and velocities. Errors in these measurements have significant implications, affecting the calculated pre-impact orbit, influencing mass estimates, and impacting the accuracy of dark flight simulations, where applicable. Here we implement a new atmospheric refraction correction technique that addresses a significant aspect previously overlooked in the field of meteor science. Traditional refraction correction techniques, originally designed for objects positioned at infinite distances, tend to overcompensate when applied to objects within the Earth's atmosphere. To rectify this issue, our study introduces the concept of the atmospheric refraction delta z correction technique, involving the artificial elevation of the observer site height above sea level. We utilize analytically derived formulas for the delta z correction in conjunction with commonly used refraction models, validating these results against a numerical solution that traces light rays through the atmosphere. This ray-tracing model is applied to finely meshed atmospheric layers, yielding precise correction values. We evaluate multiple sources of error in order to quantify the achievable accuracy of the proposed method. Our approach (1) enables the determination of fireball positions with improved astrometric accuracy, (2) removes the explicit dependence on the fireball distance from the observer or its height above Earth's surface within the limits imposed by realistic atmospheric variability, and (3) simplifies meteor data processing by providing a robust framework for analyzing low-elevation fireball observations, for which atmospheric refraction is significant and is automatically corrected by the method. As a result of this work, we provide open, publicly accessible software for calculating the delta z correction.

Scalar Dispersion from Wall-Mounted Cylinders at Large Reynolds Number: Plume Transitions and Regime Classification

2026-01-25T15:01:44Z

This study presents a comprehensive experimental investigation of scalar dispersion from the free end of wall-mounted cylindrical obstacles immersed in a large-Reynolds-number turbulent boundary layer. A key focus is the characterization of transition behavior between distinct dispersion regimes: elevated plumes (EP), ground-level plumes (GLP), and ground-level sources (GLS). Experiments systematically vary the primary and secondary aspect ratios ($AR_1, AR_2$) and the velocity ratio ($ r$) to explore their effects on the evolution of scalar plumes. Plume classification is governed by the non-dimensional parameter $\tilde{h}_s / δ_{cz}$, which quantifies the progressive interaction between the plume and the ground. Here, $\tilde{h}_s$ denotes the effective source height and $δ_{cz}$, the vertical plume half-width. Detailed concentration measurements demonstrate that the EP--GLP--GLS transitions substantially modify both vertical and lateral dispersion characteristics. The measurements reveal systematic departures from classical dispersion-coefficient scaling. To assess the capability of existing models under these conditions, the experimentally determined dispersion coefficients are used to evaluate the Gaussian Dispersion Model (GDM) and a Wall Similarity Model (WSM). The GDM captures general trends but deviates in specific regimes, whereas the WSM offers improved representation under GLS conditions. The resulting dataset, grounded in systematic laboratory measurements, establishes a critical benchmark for validating numerical simulations and informing the development of next-generation predictive models. Finally, leveraging these results, a concise data-informed predictive framework is introduced that captures the EP--GLP--GLS transitions and provides first-order estimates of ground-level concentration across geometric and momentum-ratio parameter space.

A Cloud Condensation Model on Insoluble Nuclei Validated with Radiosonde and Ceilometer Data: Implications for Dust based Rainfall Forecasting

2026-01-25T12:36:20Z

This study introduces and validates a cloud condensation model on insoluble nuclei using a novel comparative analysis of simultaneous radiosonde and ceilometer data. A transformation of the radiosonde's temperature and relative humidity profiles into a simulated optical backscatter signal is implemented via the model, which includes a critical rate-limiting activation step. By comparing this simulated signal with the ceilometer's measured data, the model can determine the minimum effective size of dust particles required to act as cloud condensation nuclei. This approach has direct implications for improving the parameterization of cloud formation in local weather models, particularly for rainfall forecasting in dust-prone arid and semi-arid regions.

Nowcast3D: Reliable precipitation nowcasting via gray-box learning

2026-01-25T02:36:07Z

Reliable nowcasting of extreme precipitation remains difficult because convective systems are strongly nonlinear, multiscale, and nonstationary in 3D. Radar is the backbone of nowcasting, yet existing methods struggle to predict extremes: physics-based extrapolation cannot capture growth and decay, deterministic learning tends to oversmooth and underestimate peaks, and purely generative models often lack physical consistency. Hybrid schemes help but are mostly limited to 2D composite reflectivity, collapsing the atmosphere into one layer and discarding vertical structure critical for height-dependent dynamics. We introduce Nowcast3D, a gray-box, fully 3D framework that works directly on volumetric radar reflectivity. The end-to-end model couples physically constrained neural operators (advection, local diffusion, and microphysics) with a conditional diffusion model to generate ensemble forecasts with quantified uncertainty. Trained on provincial-scale 3D volumes over a $10.24^\circ \times 10.24^\circ$ region and fine-tuned on a $2.56^\circ \times 2.56^\circ$ city region ($0.01^\circ \approx 1$ km), Nowcast3D provides near-real-time forecasts up to 3 h and outperforms competitive baselines in cross-region and temporal out-of-sample tests. It can also infer wind fields without labeled supervision, supporting physically plausible transport. In a nationwide blind evaluation by 160 meteorologists, Nowcast3D ranked first and was preferred in 57% of post-hoc assessments, surpassing the leading baseline (27%). These results highlight its reliability and operational value for extreme precipitation nowcasting.

Gravity Wave Interactions in the Stratocumulus-Topped Boundary Layer

2026-01-24T23:57:30Z

This work studies the breakup propensity of the stratocumulus-topped boundary layer (STBL) interacting with gravity waves using large-eddy simulation with a uniform vertical grid of $5$ m and horizontal spacing of $30$ m. A radiative-convective equilibrium (RCE) state is constructed to enforce stationarity in the STBL, and the gravity waves are introduced via a vertical momentum forcing mimicking a packet of plane waves. A nondimensionalization involving the inversion height and mean horizontal base wind as length and velocity scales is proposed to provide a framework to analyze the forcing parameter space. The magnitude of the scaled forcing amplitude ($\mathcal{A}$) is critical in understanding various STBL breakup conditions. Classification of breakup was based on the reduction of the liquid water path for each forced STBL case. We found that breakup did not occur for $\mathcal{A}<1$ and observed modest reductions in cloud for $1<\mathcal{A}<2$, but the deck recovered to the stationary state slowly after the single-period forcing ceased. Fixing $\mathcal{A}\sim 2$ showed that forcings with longer duration and wider locality promote breakup. However, when the forcing is a linear combination of waves of two different periods, the percentage of cleared cloud dramatically increases, though recovery of RCE is still observed in some cases. $\mathcal{A}\geq2.5$ marks a critical threshold by which the STBL breaks up entirely and remains patchy. We further explore the connection between these bulk breakup results and the turbulent state by examining energy budgets and the anisotropy induced by the forcing.

CondensNet: Enabling stable long-term climate simulations via hybrid deep learning models with adaptive physical constraints

2026-01-24T07:27:03Z

Accurate and efficient climate simulations are crucial for understanding Earth's evolving climate. However, current general circulation models (GCMs) face challenges in capturing unresolved physical processes, such as cloud and convection. A common solution is to adopt cloud resolving models, that provide more accurate results than the standard subgrid parametrisation schemes typically used in GCMs. However, cloud resolving models, also referred to as super paramtetrizations, remain computationally prohibitive. Hybrid modeling, which integrates deep learning with equation-based GCMs, offers a promising alternative but often struggles with long-term stability and accuracy issues. In this work, we find that water vapor oversaturation during condensation is a key factor compromising the stability of hybrid models. To address this, we introduce CondensNet, a novel neural network architecture that embeds a self-adaptive physical constraint to correct unphysical condensation processes. CondensNet effectively mitigates water vapor oversaturation, enhancing simulation stability while maintaining accuracy and improving computational efficiency compared to super parameterization schemes. We integrate CondensNet into a GCM to form PCNN-GCM (Physics-Constrained Neural Network GCM), a hybrid deep learning framework designed for long-term stable climate simulations in real-world conditions, including ocean and land. PCNN-GCM represents a significant milestone in hybrid climate modeling, as it shows a novel way to incorporate physical constraints adaptively, paving the way for accurate, lightweight, and stable long-term climate simulations.

Learning Accurate Storm-Scale Evolution from Observations

2026-01-24T02:53:28Z

Accurate short-term prediction of clouds and precipitation is critical for severe weather warnings, aviation safety, and renewable energy operations. Forecasts at this timescale are provided by numerical weather models and extrapolation methods, both of which have limitations. Mesoscale numerical weather prediction models provide skillful forecasts at these scales but require significant modeling expertise and computational infrastructure, which limits their accessibility. Extrapolation-based methods are computationally lightweight but degrade rapidly beyond 1-2 hours. This presents an opportunity for data-driven forecasting directly from observations using geostationary satellites and ground-based radar, which provide high-frequency, high-resolution observations that capture mesoscale atmospheric evolution. We introduce Stormscope, a family of transformer-based generative diffusion models trained on high-resolution, multi-band geostationary satellite imagery and ground-based weather radar over the continental United States. Stormscope produces forecasts at a temporal resolution of 10 minutes and 6 kilometer spatial resolution, which are competitive with state-of-the-art mesoscale NWP models for lead times up to 6 hours. Its generative architecture enables large ensemble forecasts of explicit mesoscale dynamics for robust uncertainty quantification. Evaluated against extrapolation methods and operational mesoscale NWP models, Stormscope achieves leading performance on standard deterministic and probabilistic verification metrics across forecast horizons from 1 to 6 hours. As Stormscope relies on globally available satellite observations (and radar where available), it offers a pathway to extend skillful mesoscale forecasting to oceanic regions and countries without strong operational mesoscale modeling programs.

Probing forced responses and causality in data-driven climate emulators: conceptual limitations and the role of reduced-order models

2026-01-24T01:13:18Z

A central challenge in climate science and applied mathematics is developing data-driven models of multiscale systems that capture both stationary statistics and responses to external perturbations. Current neural climate emulators aim to resolve the atmosphere-ocean system in all its complexity but often struggle to reproduce forced responses, limiting their use in causal studies such as Green's function experiments. To explore the origin of these limitations, we first examine a simplified dynamical system that retains key features of climate variability. We interpret the results through linear response theory, providing a rigorous framework to evaluate neural models beyond stationary statistics and to probe causal mechanisms. We argue that the ability of emulators of multiscale systems to reproduce perturbed statistics depends critically on (i) the choice of an appropriate coarse-grained representation and (ii) careful parameterizations of unresolved processes. These insights highlight reduced-order models, tailored to specific goals, processes, and scales, as valuable alternatives to general-purpose emulators. We next consider a real-world application by developing a neural model to investigate the joint variability of the surface temperature field and radiative fluxes. The model infers a multiplicative noise process directly from data, largely reproduces the system's probability distribution, and enables causal studies through forced responses. We discuss its limitations and outline directions for future work. Overall, these results expose key challenges in data-driven modeling of multiscale physical systems and underscore the value of coarse-grained, stochastic approaches, with response theory providing a principled framework to guide model design and enhance causal understanding.

Estimation of temperature and precipitation uncertainties using quantile neural networks

2026-01-24T00:31:25Z

Extreme events pose significant risks and are challenging to predict. Assessing climate hazards requires placing quantitative constraints on geophysical fields under observable but fluctuating conditions. We propose a framework for estimating uncertainties -- a ReLU-bias loss quantile neural network (RBLQNN) -- with two novel modifications to the loss function to enforce uniform quantile accuracy and reduce degenerate predicted probability distributions. We evaluate the RBLQNN against other probabilistic baselines on a suite of datasets: synthetic datasets, observed daily temperature maxima from 1,501 NOAA Global Surface Summary of the Day (GSOD) weather stations, and altimetry-observed precipitation from the Tropical Rainfall Measuring Mission (TRMM). On synthetic datasets, the RBLQNN accurately predicts conditional distributions where more restrictive methods like linear quantile regression (LQR) or mean-variance estimation (MVE) neural networks fail, mitigates shortcomings of some other quantile neural networks, and converges stably under a range of hyperparameters. When applied to daily temperature maxima, the RBLQNN reveals that temperature distributions are relatively well described by Gaussian statistics, though nonlinear dependencies on local sea level pressure and geopotential heights appear important. For precipitation statistics, the RBLQNN strongly outperforms both LQR and MVE baselines, demonstrating its capacity to capture highly nonlinear and non-Gaussian conditional distributions. The RBLQNN's performance across varied datasets demonstrates it is a flexible and general approach for constraining uncertainties in geophysical quantities with nonlinear or non-Gaussian conditional dependencies.

Black Carbon scavenging in liquid Arctic clouds: the role of size and mixing state

2026-01-23T18:58:50Z

Black carbon (BC) contributes to Arctic warming by absorbing sunlight and darkening snow. Its atmospheric lifetime critically determines its concentration and climate impact, yet the processes controlling its removal remain poorly constrained in the Arctic. From 18 months of single-particle measurements at the Zeppelin Observatory (Svalbard), we analysed 37 liquid cloud events (~200 hours) to investigate the link between BC properties and in-cloud scavenging, providing the most extensive in-cloud single particle BC dataset to date. While large BC cores (DrBC>200 nm) were consistently scavenged, smaller cores were only partly removed. However, even thin soluble coatings significantly enhanced their scavenging, showing that mixing state modulates BC scavenging in the CCN-limited regime typical of Arctic low-level clouds. Seasonal variability in clear sky BC mixing state further suggests corresponding changes in scavenging efficiency. Our results demonstrate that besides size, the size-resolved BC mixing state is a key variable for BC scavenging in the Arctic and models should take it into consideration to accurately predict BC-cloud interaction.

Climate-Adaptive and Cascade-Constrained Machine Learning Prediction for Sea Surface Height under Greenhouse Warming

2026-01-23T15:50:58Z

Machine learning (ML) has achieved remarkable success in climate and marine science. Given that greenhouse warming fundamentally reshapes ocean conditions such as stratification, circulation patterns and eddy activity, evaluating the climate adaptability of the ML models is crucial. While physical constraints have been shown to enhance the performance of ML models, kinetic energy (KE) cascade has not been used as a constraint despite its importance in regulating multi-scale ocean motions. Here we develop two sea surface height (SSH) prediction models (with and without KE cascade constraint) and quantify their climate adaptability at the Kuroshio Extension. Both models exhibit only slight performance degradation under greenhouse warming conditions. Incorporating the KE cascade as a physical constraint significantly improves the model performance, reducing eddy kinetic energy errors by 14.7% in the present climate and 15.9% under greenhouse warming. Additional validations using satellite observations and in the Gulf Stream region further confirm the robustness of the proposed models. Compared with the KE spectrum constraint, both constraints improve the cross-scale transfer and spectrum of KE, but the KE cascade constraint yields larger improvements in the cross-scale transfer. This work presents the first application of the KE cascade as a physical constraint for ML-based ocean state prediction and demonstrates its robust adaptability across climates, offering guidance for the further development of global ML models for both present and future conditions.

Diagnostic vs dynamic representation of the inverse barometer effect in a global ocean model and its potential for probabilistic storm surge forecasting

2026-01-23T09:10:41Z

The global ocean model NEMO is run in a series of stand-alone configurations (2015-2022) to investigate the potential for improving global medium-range storm surge forecasts by including the inverse barometer effect. The analysis focus on the residual water level, i.e. the water level variations not due to tides. Here, we compare a control experiment, where the inverse barometer effect was not included, against a run dynamically forced with mean sea level pressure. In the control experiment, the inverse barometer effect was then calculated diagnostically and added to the ocean model sea surface elevation, resulting in a total of three experiments to investigate. We compare against the global GESLA3 water level data set and find that the inclusion of the inverse barometer effect reduces the root-mean-square error by $\sim 1~cm$ on average. When we mask out all data where the observed residual water level is less than $\pm1$ or $\pm2$ standard deviations, including the inverse barometer effect reduces the RMS error by $4-5$ cm. While both methods reduce water level errors, there are regional differences in their performance. The run with dynamical pressure forcing is seen to perform slightly better than diagnostically adding the inverse barometer effect in enclosed basins such as the Baltic Sea. Finally, an ensemble forecast experiment with the Integrated Forecast System of the European Centre for Medium-range Weather Forecasts demonstrates that when the diagnostic inverse barometer effect is included for a severe storm surge event in the North Sea (Storm Xaver, December 2013), the ensemble spread of water level provides a stronger and earlier indication of the observed maximum surge level than the when the effect is excluded.

Toward Trustworthy Short-Range Forecasts with AFNO: From Skill Metrics to Conservation Checks

2026-01-22T05:19:51Z

Data driven weather models now approach traditional numerical weather prediction (NWP) skill at short to medium lead times, but their dynamical consistency during autoregressive rollout remains uncertain.