https://arxiv.org/api/M3XH6B/k2UV6vsDJ0WAQzqpD+Pc 2026-06-15T08:12:54Z 8858 75 15 http://arxiv.org/abs/2605.13065v1 2026-05-13T06:39:37Z

This paper presents the design of a rapid cycling synchrotron (RCS) featuring a longitudinal localized kick driven fast extraction system for three-dimensional (3D) pencil beam scanning (PBS) proton FLASH delivery. The extraction method is designed to accommodate a novel scanning scheme that addresses the stringent requirement for substantially shorter delivery time compared to current solutions, where the scanning layer is parallel to the proton beam direction. In this method, the kicker pulse waveform is applied selectively to specific longitudinal segments of the proton bunch. For each scanning spot, the functional region of the kicker along the longitudinal direction is dynamically adjusted based on real-time beam longitudinal line density measured by a beam current monitor. The corresponding region-determination algorithm is provided. We analyze the spot dose accuracy and the beam loss at the septum, indentifying increased particle longitudinal line density will reduce spot dose accuracy and increase beam loss. A total number of particles of $2\times10^{10}$ can satisfy the requirements of spot dose accuracy and the beam loss due to the septum is less than 1%. The extraction system comprises a stripline kicker, an electric septum (ESe), and a magnetic septum (MSe), imposing specific requirements on the RCS lattice design. The RCS is carefully designed to meet these constraints, and the parameters of the extraction elements are detailed. By integrating a novel scanning scheme with a specially designed RCS and fast extraction method, this work demonstrates the feasibility of achieving 3D PBS proton FLASH delivery.

2026-05-13T06:39:37Z 16 pages, 21 figures, submitted to Physical Review Applied Yang Xiong Hongjuan Yao Shuxin Zheng http://arxiv.org/abs/2605.12912v1 2026-05-13T02:38:18Z

The FCC-ee is designed to operate with exceptionally strong beam--beam interactions, making continuous injection a critical and non-trivial aspect of its operation. During the injection process, an unavoidable charge imbalance between the two colliding beams leads to asymmetric beam--beam forces, potentially compromising transverse stability. In this paper, we introduce a quasi-strong-strong (QSS) beam--beam scheme, implemented in the SAD simulation framework. The method preserves a self-consistent beam--beam lens by coupling paired weak--strong simulations, while avoiding the computational cost of full strong--strong tracking. The injection process is modeled as a gradual increase of the stored bunch population, allowing the isolated study of beam--beam--driven optics deformation under charge imbalance. Using the QSS approach, we investigate the feasibility of bootstrapping injection in the Z, W, and H operating modes of FCC-ee. Stable injection paths up to the nominal bunch population are identified in the W and H modes. In contrast, in the explored parameter region, the Z mode exhibits saturation of the stored population below the nominal value.

2026-05-13T02:38:18Z 4 pages, 4 figures. This manuscript has been submitted to Physical Review Accelerator and Beams. This submission is a substantially revised version of a previously rejected manuscript. The QSS formulation has been clarified and the physical interpretation has been significantly expanded Takashi Mori Katsunobu Oide Frank Zimmermann http://arxiv.org/abs/2605.18828v1 2026-05-12T21:18:11Z

The purpose of this style guide is to provide a clear, consistent framework for the design and development of human system interfaces (HSIs) used throughout the Fermilab accelerator complex. It establishes a shared visual and interaction foundation to ensure that interfaces remain intuitive, effective, and cohesive, regardless of when or by whom they are developed. By adhering to these guidelines, developers can avoid introducing unnecessary deviations that compromise usability or increase system training burden. This consistency is especially critical in long-term, multi-contributor projects where interface continuity and maintainability are paramount. This document serves as a practical reference for all HSI development activities related to the accelerator control environment. While the guidance provided is comprehensive, it is not exhaustive of every potential design scenario. As such, the style guide is intended to function as a living document, subject to regular review and revision. Updates will be made at least annually to incorporate emerging best practices, operational feedback, and evolving system needs. Areas where detailed guidance is still under development are clearly indicated in gray throughout the document and will be addressed in future revisions according to project priorities.

2026-05-12T21:18:11Z arXiv admin note: text overlap with arXiv:2312.12579 Rachael Hill the ACORN Collaboration Casey Kovesdi the ACORN Collaboration Torrey Mortenson the ACORN Collaboration Madelyn Polzin the ACORN Collaboration Zach Spielman the ACORN Collaboration Katya Le Blanc the ACORN Collaboration http://arxiv.org/abs/2605.12267v1 2026-05-12T15:30:20Z

We present the first part of an efficient framework for nonlinear beam dynamics, termed Approximate Invariant Analysis (AIA). The framework is based on the construction of approximate invariants~[Y.~Li, D.~Xu, and Y.~Hao, Phys.\ Rev.\ Accel.\ Beams \textbf{28}, 074001 (2025)] and on the extraction of the betatron frequency with the geometric foundations of Poincaré rotation number~[S.~Nagaitsev and T.~Zolkin, Phys.\ Rev.\ Accel.\ Beams \textbf{23}, 054001 (2020)]. The method is demonstrated using the National Synchrotron Light Source~II (NSLS-II) storage ring as an illustrative example.

2026-05-12T15:30:20Z 5 pages, 6 figures, submitted to IPAC26 Yongjun Li Sergei Nagaitsev Derong Xu Yue Hao Chad Mitchell http://arxiv.org/abs/2605.11548v1 2026-05-12T05:25:43Z

Laser wakefield accelerators (LWFAs) are attractive compact drivers for free-electron lasers (FELs) because they can generate femtosecond electron beams with high peak current over centimeter-scale acceleration distances. However, their relatively large energy spread remains a major obstacle to high-gain FEL operation. Although bunch energy compression can reduce the slice energy spread to a level suitable for FEL amplification, it also introduces a strong energy chirp. The energy chirp detunes the FEL resonance along the planar undulator, causing phase slippage between the electrons and the radiation field, reduced bunching efficiency, and degraded radiation power and spectral quality. Here we investigate a longitudinally tapered undulator for compensating the chirp-induced resonance mismatch in a self-amplified spontaneous-emission (SASE) FEL driven by an energy-compressed LWFA beam. Using three-dimensional unaveraged simulations, we show that an optimized taper profile restores electron-radiation phase synchronization and significantly improves both the saturation power and the spectral properties relative to the untapered case. We also assess the sensitivity of the scheme to shot-to-shot beam-energy fluctuations characteristic of LWFA operation. Our results show that undulator tapering is an effective method for mitigating chirp-induced performance degradation in compact plasma-based FELs.

2026-05-12T05:25:43Z Shan-You Teng Wai-Keung Lau Shih-Hung Chen Wei-Yuan Chiang http://arxiv.org/abs/2605.10826v1 2026-05-11T16:44:57Z

A single-aperture, two-layer Canted-Cosine-Theta (CCT) sextupole magnet using high-temperature superconducting (HTS) ReBCO tape has been developed for the short straight sections (SSS) of FCC through the FCCee-HTS4 project. The magnet was designed, manufactured and tested under cryogenic conditions. Two HTS tapes from two manufacturers have been qualified for this specific application. Design and manufacturing details and cryogenic temperature measurements are presented. This demonstrator represents the first HTS CCT magnet ever constructed.

2026-05-11T16:44:57Z 4 pages, 6 figures M. Koratzinos F. Bardi V. Batsari I. Dimoulios O. Kuhlmann A. Thabuis M. Duda http://arxiv.org/abs/2605.05505v2 2026-05-11T11:32:12Z

Bulk niobium has long been the material of choice for superconducting radio-frequency applications. An alternative approach is the superconductor-insulator-superconductor multilayer structure, which enables the use of brittle high-$T_c$ materials such as NbTiN. At present, SIS coatings are limited to flat samples, with the single-cell TESLA cavity representing a key milestone. Extending coating processes to non-flat geometries is expected to introduce macroscopic inhomogeneities in coating thickness. We model these variations using Gaussian random fields parametrized by a length scale, and generated by solving a stochastic partial differential equation. The resulting field is incorporated into the boundary condition of the cavity eigenvalue problem, from which quantities of interest -- such as resonant frequency and quality factor -- are computed. This procedure is repeated for eight length scales, with \num{2048} samples per length scale, where the resulting quality factors are recorded. Our results show that the quality factors follow a normal distribution. The standard deviation increases with the length scale and can be statistically distinguished. In contrast, the mean values remain largely unchanged, with only a few significant differences. In extreme cases, depending on the length scale, the quality factor may differ from the uniform case by \SIrange{2}{6}{\percent}.

2026-05-06T23:03:02Z Aaron Gobeyn Wolfgang Ackermann Herbert De Gersem http://arxiv.org/abs/2605.09574v1 2026-05-10T14:37:52Z

Laser-plasma acceleration produces ultrashort, high-brightness ion beams reaching tens of MeV, yet their large divergence and broad energy spread require dedicated capture elements for beam transport. Using laser-accelerated protons from the GSI PHELIX laser to the LIGHT beamline as a reference, we developed a framework to optimize and assess such combined capture and transport systems, with emphasis on injection into conventional accelerators. In addition to our numerical analysis we derive scaling laws linking transmission and chromatic emittance growth to the initial half-opening angle, showing that the present performance is primarily divergence-limited. We also estimate and predict the longitudinal bunch quality and quantify the divergence reduction needed to approach injector-relevant intensities.

2026-05-10T14:37:52Z Daniel C. E. Dewitt Oliver Boine-Frankenheim Abel Blazevic http://arxiv.org/abs/2605.08370v1 2026-05-08T18:26:15Z

The Proton Improvement Plan - II (PIP-II) injector linac is an 800 MeV superconducting H$^-$ linac, christened Linac2, that will replace the existing 400 MeV injector to the accelerator complex at Fermilab. The higher energy, intensity and repetition rate require various upgrades to the existing accelerator complex consisting of the Booster, the Recycler Ring and the Main Injector, in order to be able to accept and accelerate beam from PIP-II. In this paper we discuss various upgrades that are required and steps being taken to implement them.

2026-05-08T18:26:15Z 17th International Particle Accelerator Conference (IPAC 2026) S. Krishnagopal Fermi National Accelerator Laboratory M. Convery Fermi National Accelerator Laboratory J. Dey Fermi National Accelerator Laboratory http://arxiv.org/abs/2605.08331v1 2026-05-08T17:47:07Z

The planned High Luminosity upgrade to the Large Hadron Collider at CERN aims to increase the instantaneous luminosity peak to about 7.5 x 10^{34} cm^{-2}s^{-1}. The ATLAS detector will be extensively re-designed to meet the challenges of this upgrade. This paper focuses on the use of computational fluid dynamics to characterise the thermoflow in order to model the dry nitrogen flushing scheme in the Common Environmental Monitoring and Interlock System for the ATLAS Inner Tracker as part of the upgrade process. The Technical Design Report considers the possibility for the bi-phase CO2 coolant temperature to drop to as low as -55 degrees C in the case of a fault. The specification for the highest Relative Humidity within the ITk volume is therefore equivalent to a dew point temperature at or below -60 degrees C in order to prevent condensation which could damage the detector electronics. The design accommodates for humidity monitoring to detect the onset of such events and dry nitrogen flushing to remove moisture. Therefore, it is important to thoroughly understand all consequences of atmospheric air ingress due to air-leaks and/or air-ingress from the outlets due to the over-pressure. The computational fluid dynamics model presented in this study was used to provide quantitative and qualitative insight into the various operational and failure conditions, informing engineering design changes to optimise the flushing scheme and ensure that the ITk remains dry and within the design specification of the acceptable dew point range.

2026-05-08T17:47:07Z 19 pages, 19 figures Muaaz Bhamjee Matthew Connell Simon Connell Emmanuel Igumbor Lerothodi Leeuw Pedro Mafa Marco Oriunno Marcel Vreeswijk http://arxiv.org/abs/2605.07958v1 2026-05-08T16:21:54Z

We extend the multilayer model of \etal{Kubo} for superconductor-insulator-superconductor (SIS) structures in two ways: first, by generalizing it to arbitrary sequences of layers of arbitrary type, i.e. superconducting, normal conducting, and insulating; and second, by accounting for all contributions, including ohmic losses and dielectric effects. We examine the maximum applicable field for $(\text{SI})^n\text{S}$ structures. We find that the optimum configuration corresponds to the $n=1$ case. However, the thickness of the superconducting coating layers can be reduced to below their penetration depth with minor performance penalty. We discuss the ability to model transitions in SS bilayers by introducing a set of virtual layers that represent the transition region through interpolated parameters. We find degradation of the maximum applicable field with thicker transition layers, and a larger effective penetration depth of the electromagnetic fields. Furthermore, the surface impedance of the multilayer structure is calculated using the Leontovich boundary condition, yielding a formulation suitable for integration into finite element simulations. Additionally, the Poynting theorem is used to determine the loss contributions of individual layers.

2026-05-08T16:21:54Z Aaron Gobeyn Wolfgang Ackermann Herbert De Gersem http://arxiv.org/abs/2605.07929v1 2026-05-08T16:02:13Z

We describe an electron bunch injector scheme based on proton-driven plasma wakefield acceleration for the Electron-Ion Collider. The proton bunches needed to drive the plasma wake are taken from the existing Blue-Ring of RHIC. The polarized electron source is taken from the current EIC design. We describe the different elements making up the injection scheme and give an estimate for the performance. Our initial study indicates that the design parameters of the EIC are within reach when accelerating the electron bunches in the proton-driven plasma wake, with average polarization of ~70% and a luminosity of 1e34 cm$^{-2}$s$^{-1}$.

2026-05-08T16:02:13Z 22 pages, 9 figures J. P. Farmer H. Jaworska A. Caldwell N. Lopes A. Pukhov L Reichwein F. Willeke M. Wing http://arxiv.org/abs/2605.07871v1 2026-05-08T15:28:38Z

We describe a scheme for generation of coherent $γ$-rays by backscattering intense visible laser light from a beam of partially stripped ions. The scheme is similar in principle to the proposed Gamma Factory at CERN, with the important difference that the scattering becomes coherent as a result of a collective instability which microbunches the ions. This instability is analogous to that which occurs in high-gain free electron lasers (FELs). The scheme potentially offers a route to a source of tuneable, coherent $γ$-rays, opening up a wide range of possible new applications and opportunities. We find that the parameter requirements for realization of coherent $γ$-ray generation regime are considerably more stringent than those proposed for the Gamma Factory, requiring significant increases in the pump laser intensity and possibly the ion beam current.

2026-05-08T15:28:38Z Nicola Piovella Gordon R. M Robb http://arxiv.org/abs/2603.01927v2 2026-05-08T14:09:10Z

Plasma accelerators are rapidly evolving toward user-relevant machines with increasing repetition rates, particle energies and average beam powers. Despite their compact size, the operational characteristics of plasma accelerators are comparable to those of radio-frequency linacs, involving the continuous generation and dumping of electron bunches. However, beam properties and loss patterns can differ substantially from those of conventional accelerators, leading to radiation safety considerations dominated by high peak charges and distributed beam losses relevant for both personnel protection and machine integrity. Using established scaling laws, we show that significant dose rates already occur at electron energies of several MeV, underscoring the relevance of radiation protection even for comparatively low-energy plasma accelerators. Based on a combination of Monte Carlo and particle-in-cell simulations, supported by radiation measurements from plasma accelerator experiments at DESY, we analyze typical radiation fields with a particular focus on radiation generated close to the plasma source. These findings highlight the need for dedicated shielding and beam-dump concepts tailored to plasma accelerators, especially in view of increasing average beam powers and future application-oriented operation.

2026-03-02T14:39:42Z 16 pages, 6 figures. Submitted to the proceedings of the 7th European Advanced Accelerator Conference (EAAC 2025), Revised version after referee comments S. Bohlen M. Kirchen T. Liang A. Leuschner A. R. Maier A. Martinez de la Ossa E. Panofski K. Schubert M. Thévenet P. A. Walker I-L. Yeh S. Zander http://arxiv.org/abs/2605.05734v1 2026-05-07T06:25:51Z

Femtosecond electron beams with complex modulation play a crucial role in applications such as X-ray Free Electron Lasers (XFELs) and plasma wakefield accelerators. However, diagnostics for the electron beam current profile still face challenges with complex structure. In this letter, we propose a novel temporal retrieval algorithm for the coherent transition radiation (CTR) diagnostics of complex modulated electron beams. Starting from the time-frequency analysis of the electron bunch train, the algorithm separates and reconstructs the high- and low-frequency components. A temporal kernel was derived from the inverse sampling of the measured spectrum to construct the high-frequency component, while the low-frequency envelope was composed of several basis functions. Tested on the electron bunch trains from the complex multi-gaussian model and bunching-enhanced coherent harmonic generation, the algorithm successfully reconstructed the temporal signals and achieves better performance than the Kramers-Kronig method. This method is expected to crucial provide temporal evidence for potential electron beam modulation schemes, and will enable broad prospects for future applications.

2026-05-07T06:25:51Z 8 pages, 5 figures Zixiao Guo Ke Feng Zhiheng Lou Guiyao Wang Wentao Wang Ruxin Li