https://arxiv.org/api/iZcXDrTUnFBBX4nMwY3vygklH5I 2026-04-15T07:51:40Z 8748 675 15 http://arxiv.org/abs/2504.12065v1 2025-04-16T13:20:36Z

This paper investigates the magnetic fields produced by a three-coil system, focusing on how different mesh resolutions affect the accuracy of the results. Using both the Poisson solver, as well as a numerical approach based on the solution of fractional integrals, the study examines coils with dimensions of 80 mm by 160 mm and a radius of 15.5 mm, each carrying a current of 200 A. The research explores how varying mesh step sizes within the coil regions influences the simulations accuracy and convergence. The results are analyzed along a line parallel to the central axis at a distance equal to half of the solenoid's radius.. The findings emphasize the consistency of the numerical results, the compatibility of the solvers, and offer insights into further optimization strategies for more efficient simulations.

2025-04-16T13:20:36Z Mostafa Behtouei Alberto Bacci Martina Carillo Moreno Comelli Luigi Faillace Mauro Migliorati Livio Verra Bruno Spataro http://arxiv.org/abs/2504.12028v1 2025-04-16T12:38:37Z

The U.S. Magnet Development Program (US-MDP) explores high-field accelerator magnets compatible with operational conditions beyond the limits of Nb$_3$Sn technology. The ongoing R\&D High-Temperature Superconductors (HTS) suggests using Bi$_2$Sr$_2$CaCu$_2$O$_{8-x}$ (Bi-2212) as superconducting element. Bi-2212 Rutherford cables maintain a high critical current (I$_C$) when exposed to a large external magnetic field. However, Bi-2212 exhibits an oversensitive stress-strain response when subject to large Lorentz forces. This paper reports on the magnetic and mechanical analysis of the Bi-2212 cosine-theta insert being developed at Fermilab for a hybrid magnet composed of two external layers of Nb$_3$Sn and two internal layers of Bi-2212. We performed a FEM analysis of the insert to estimate the HTS stress state in the coil's strands under magnetic and mechanical loads.

2025-04-16T12:38:37Z Supercond.Sci.Technol. 38 (2025) 3, 035021 A. D'Agliano A. V. Zlobin I. Novitski D. Turrioni E. Barzi S. Donati V. Giusti 10.1088/1361-6668/adb340 http://arxiv.org/abs/2403.06508v3 2025-04-16T07:51:35Z

Waveguides offer a means to controllably couple atomic ensembles to the electromagnetic field therein. Here, we demonstrate x-ray propagation in planar thin-film waveguides coupled to Mössbauer nuclei under collective resonant excitation by short pulses of synchrotron radiation. We record x-ray photons that have been emitted into resonant modes of the waveguide. Depending on the geometry and mode of excitation, two fundamentally different signatures of the collective emission are observed, for which we present a unifying theoretical model. Our results form a new platform for waveguide quantum electrodynamics in the hard x-ray regime with the potential to provide a coherent narrowband source of x-rays on the nanometer scale.

2024-03-11T08:35:04Z Phys. Rev. Lett. 135, 053601 (2025) Leon M. Lohse Petar Andrejić Sven Velten Malte Vassholz Charlotte Neuhaus Ankita Negi Anjali Panchwanee Ilya Sergeev Adriana Pálffy Tim Salditt Ralf Röhlsberger 10.1103/r2hf-9qn9 http://arxiv.org/abs/2504.11731v1 2025-04-16T03:10:54Z

An activity of the TRIUMF automatic beam tuning program, the Bayesian optimization for Ion Steering, BOIS, method has been developed to perform corrective centroid steering of beams at the TRIUMF ISAC facility. BOIS exclusively controls the steerers for centroid correction after the transverse optics have been set according to theory. The method is fully online, easy to deploy, and has been tested in low energy and postaccelerated beams at ISAC, achieving results comparable to human operators. scaleBOIS and boundBOIS are naive proof of concept solutions to preferably select beam paths with minimal steering. Repeatable and robust automated steering reduces reliance on operator expertise and operational overhead, ensuring reliable beam delivery to the experiments and thereby supporting TRIUMF's scientific mission.

2025-04-16T03:10:54Z 10 pages, 9 figures, 3 tables. Bayesian optimization applied to ion beam centroid tuning Emma Ghelfi Alexander Katrusiak Rick Baartman Wojtek Fedorko Oliver Kester Giordano Kogler Anele Olivier Shelbaya Defne Tanyer 10.1063/5.0233169 http://arxiv.org/abs/2501.19123v2 2025-04-15T09:08:31Z

This paper presents the successful application of a phase-lock feedback system to maintain the resonance condition of a radio frequency (rf) spin rotator (specifically, an rf Wien filter) with respect to a 120 kHz spin precession in the Cooler Synchrotron (COSY) storage ring. Real-time monitoring of the spin precession and the rf Wien filter signal allows the relative phase between the two to be stabilized at an arbitrary setpoint. The feedback system compensates for deviations in the relative phase by adjusting the frequency and/or phase as needed. With this method, a variation in phase relative to the demand phase with a standard deviation of $σ_{Δ\varphi}\approx 0.2\mathrm{rad}$ could be achieved. The system was implemented in two runs aiming at a first direct measurement of the deuteron electric dipole moment in 2018 and 2021. In addition, the difference between a single-bunch beam affected by the spin rotator and a two-bunch system in which only one bunch is exposed to the spin rotator fields is discussed. Both methods have been used during these beam times. The ability to keep the spin precession and the rf fields synchronized is also crucial for future investigations of electric dipole moments of charged particles using storage rings.

2025-01-31T13:27:25Z 13 pages, 10 figures V. Hejny A. Andres J. Pretz F. Abusaif A. Aggarwal A. Aksentev B. Alberdi L. Barion I. Bekman M. Beyß C. Böhme B. Breitkreutz N. Canale G. Ciullo S. Dymov N. -O. Fröhlich R. Gebel M. Gaisser K. Grigoryev D. Grzonka J. Hetzel O. Javakhishvili A. Kacharava V. Kamerdzhiev S. Karanth I. Keshelashvili A. Kononov K. Laihem A. Lehrach P. Lenisa N. Lomidze B. Lorentz G. Macharashvili A. Magiera D. Mchedlishvili A. Melnikov F. Müller A. Nass N. N. Nikolaev D. Okropiridze A. Pesce A. Piccoli V. Poncza D. Prasuhn F. Rathmann A. Saleev D. Shergelashvili V. Shmakova R. Shankar N. Shurkhno S. Siddique A. Silenko J. Slim H. Soltner R. Stassen E. J. Stephenson H. Ströher M. Tabidze G. Tagliente Y. Valdau M. Vitz T. Wagner A. Wirzba A. Wrońska P. Wüstner M. Żurek http://arxiv.org/abs/2504.09001v1 2025-04-11T22:38:53Z

Interactions between short laser pulses and electron bunches determine a wide range of accelerator applications. Finding spatiotemporal overlap between few-micron-sized optical and electron beams is critical, yet there are few routine diagnostics for this purpose. We present a method for achieving spatiotemporal overlap between a picosecond laser pulse and a relativistic sub-ps electron bunch. The method uses the transient change in optical transmission of a Ce:YAG screen upon irradiation with a short electron bunch to co-time the electron and laser beams. We demonstrate and quantify the performance of this method using an inverse Compton source comprised of a 30 MeV electron beam from an X-band linac focused to a 10 $μ$m spot, overlapped with a joule-class picosecond Yb:YAG laser system. This method is applicable to electron beams with few-microjoule bunch energies, and uses standard scintillator screens common in electron accelerators.

2025-04-11T22:38:53Z Kevin Eckrosh Sean Tilton Lucas Malin Taryn Brown Alan Dupre Antonella Semaan Alex Gardeck Gregory Babic Hyung Seo Lee Henrik Loos Mukhtar Hussein Arvinder Sandhu William S. Graves Mark R. Holl Samuel W. Teitelbaum http://arxiv.org/abs/2504.08963v1 2025-04-11T20:37:50Z

The device for injecting into a compact cyclotron is known as an inflector. The oldest simplest version is an electrostatic mirror. From the equations of motion through I derive the geometry of the mirror. Also the (1983 Bellomo et al.) transfer matrix is given in symplectic form.

2025-04-11T20:37:50Z Rick Baartman http://arxiv.org/abs/2504.08941v1 2025-04-11T19:48:18Z

The most common device for injecting into a compact cyclotron is an electrostatic device known as the spiral inflector. There is a known analytic solution for the trajectory, and therefore the electrode shape, in the idealized case of a uniform magnetic field. This is re-derived in this note and the conditions for perfect centring are found. It is moreover found that the 'Muller', or hyperboloid inflector is actually a special case of the spiral inflector.

2025-04-11T19:48:18Z Rick Baartman http://arxiv.org/abs/2503.24352v2 2025-04-11T19:07:14Z

Within the LHC community, a momentous transition has been occurring in authorization. For nearly 20 years, services within the Worldwide LHC Computing Grid (WLCG) have authorized based on mapping an identity, derived from an X.509 credential, or a group/role, derived from a VOMS extension issued by the experiment. A fundamental shift is occurring to capabilities: the credential, a bearer token, asserts the authorizations of the bearer, not the identity. By the HL-LHC era, the CMS experiment plans for the transition to tokens, based on the WLCG Common JSON Web Token profile, to be complete. Services in the technology architecture include the INDIGO Identity and Access Management server to issue tokens; a HashiCorp Vault server to store and refresh access tokens for users and jobs; a managed token bastion server to push credentials to the HTCondor CredMon service; and HTCondor to maintain valid tokens in long-running batch jobs. We will describe the transition plans of the experiment, current status, configuration of the central authorization server, lessons learned in commissioning token-based access with sites, and operational experience using tokens for both job submissions and file transfers.

2025-03-31T17:34:56Z Incorporates referee comments, 27th International Conference on Computing in High Energy and Nuclear Physics (CHEP 2024) Brian Bockelman Morgridge Institute for Research, USA Rahul Chauhan CERN, European Organization for Nuclear Research, Switzerland Diego Ciangottini INFN, Italy Dave Dykstra Fermilab National Accelerator Laboratory, USA Edita Kizinevic CERN, European Organization for Nuclear Research, Switzerland Stephan Lammel Fermilab National Accelerator Laboratory, USA Marco Mascheroni University of California at San Diego, USA Sarun Nuntaviriyakul CERN, European Organization for Nuclear Research, Switzerland Panos Paparrigopoulos CERN, European Organization for Nuclear Research, Switzerland Alan Malta Rodrigues University of Notre Dame, USA Chan-anun Rungphitakchai University of Wisconsin, USA Eric Vaandering Fermilab National Accelerator Laboratory, USA Vaiva Zokaite CERN, European Organization for Nuclear Research, Switzerland http://arxiv.org/abs/2411.17028v2 2025-04-11T17:44:56Z

Modern laser plasma accelerators (LPAs) often require plasma waveguides tens of cm long to propagate a high-intensity drive laser pulse. Tapering the longitudinal gas density profile in 10 cm scale gas jets could allow for single stage laser plasma acceleration well beyond 10 GeV with current petawatt-class laser systems. Via simulation and interferometry measurements, we show density control by longitudinally adjusting the throat width and jet angle. Density profiles appropriate for tapering were calculated analytically and via particle-in-cell (PIC) simulations, and were matched experimentally. These simulations show that tapering can increase electron beam energy using 19 J laser energy from ~9 GeV to >12 GeV in a 30 cm plasma, and the accelerated charge by an order of magnitude. This paper was published in Review of Scientific Instruments on April 11, 2025 DOI: https://doi.org/10.1063/5.0250698

2024-11-26T01:45:42Z R. Li A. Picksley C. Benedetti F. Filippi J. Stackhouse L. Fan-Chiang H. E. Tsai K. Nakamura C. B. Schroeder J. van Tilborg E. Esarey C. G. R. Geddes A. J. Gonsalves 10.1063/5.0250698 http://arxiv.org/abs/2504.08870v1 2025-04-11T11:28:43Z

The antiProton Unstable Matter Annihilation experiment (PUMA) at CERN aims to study the nucleonic composition in the matter density tail of stable and radioactive nuclei using low-energy antiprotons. Since there is no facility in which both low-energy antiprotons and radioactive nuclei can be produced, the experimental realization with exotic nuclei requires the transportation of the antiprotons from the Extra Low ENergy Antiproton (ELENA) facility to the nearby located Isotope mass Separator On-Line DEvice (ISOLDE). For tests and first applications of the proposed experimental technique to stable isotopes at ELENA, a dedicated offline ion source beamline was developed that will provide isotopically pure, cooled and bunched ion beams with intensities of more than $10^4$ ions per bunch while maintaining a vacuum of better than $5\times 10^{-10}$ mbar at the handover point. This offline ion source beamline is characterized and its capabilities are demonstrated using the example of stable krypton isotopes.

2025-04-11T11:28:43Z Moritz Schlaich Paul Fischer Paul Florian Giesel Clara Klink Alexandre Obertelli Lutz Schweikhard Frank Wienholtz http://arxiv.org/abs/2504.08309v1 2025-04-11T07:22:47Z

Frozen hydrogen filaments or droplets/pellets in vacuum are of great interest as target for many experiments at hadron and lepton accelerators as well as at high-power laser systems. Especially in case of large distances between the position of target beam generation and the interaction point with an accelerator or laser beam, a high target beam stability in space and time is crucial. Here we present recent results on the long-term stability of frozen hydrogen filaments in vacuum, which have been obtained using a new cryogenic target generator. It could be shown that the trajectory of the frozen hydrogen target beam with a diameter of $10\,\mathrm{μm}$ remains stable for over 60 hours, with angular fluctuations below $0.08\,^\circ$. Furthermore, we present a novel strategy for the manipulation of the target beam, named cryobending. Here, the produced hydrogen filament is deflected by helium gas emerging from correction nozzles. We demonstrate the deflection of the hydrogen beam with one and two nozzles, achieving deflection angles up to $(15.7\pm 0.4)\,^\circ$. The presented results open the door for further developments of this beam position system, which enables target beam adjustment without any mechanical movement of the target components itself. Potential applications of these stable hydrogen target filaments are, e.g., the upcoming MAGIX (MAinz Gas Injection target eXperiment) or the planned $\mathrm{\bar{P}ANDA}$ (anti-Proton ANnihilation at DArmstadt) experiment.

2025-04-11T07:22:47Z 12 pages, 10 figures, to be published in Nucl. Instr. Meth. A Jost Froning Christian Mannweiler Eva-Maria Hausch Anna-Luna Hannen Alfons Khoukaz 10.1016/j.nima.2025.170526 http://arxiv.org/abs/2502.10507v2 2025-04-11T00:02:32Z

Normal conducting linear particle accelerators consist of multiple rf stations with accelerating structure cavities. Low-level rf (LLRF) systems are employed to set the phase and amplitude of the field in the accelerating structure, and to compensate the pulse-to-pulse fluctuation of the rf field in the accelerating structures with a feedback loop. The LLRF systems are typically implemented with analogue rf mixers, heterodyne based architectures and discrete data converters. There are multiple rf signals from each of rf station, so the number of rf channels required increases rapidly with multiple rf stations. With many rf channels, the footprint, component cost and system complexity of the LLRF hardware increase significantly. To meet the design goals to be compact and affordable for future accelerators, we have designed the next generation LLRF (NG-LLRF) with higher integration level based on RFSoC technology. The NG-LLRF system samples rf signals directly and performs the rf mixing digitally. The NG-LLRF has been characterized in a loopback mode to evaluate the performance of the system and tested with a standing-wave accelerating structure, a prototype for the Cool Copper Collider (C3) with peak rf power up to 16.45 MW. The loopback test demonstrated amplitude fluctuation below 0.15% and phase fluctuation below 0.15 degree, which are considerably better than the requirements of C3. The rf signals from the different stages of accelerating structure at different power levels are measured by the NG-LLRF, which will be critical references for the control algorithm designs. The NG-LLRF also offers flexibility in waveform modulation, so we have used rf pulses with various modulation schemes which could be useful for controlling some of rf stations in accelerators. In this paper, the high-power test results at different stages of the test setup will be summarized, analyzed and discussed.

2025-02-14T19:11:33Z C. Liu L. Ruckman R. Herbst D. Palmer V. Borzenets A. Dhar D. Amirari R. Agustsson R. Berry E. Nanni http://arxiv.org/abs/2412.00463v2 2025-04-10T15:37:21Z

The International Muon Collider Collaboration (IMCC) is engaged in a design study for a future facility intended to collide muons. Subsequent to the initial linear acceleration, the counter-rotating muons and anti-muons are accelerated in a chain of rapid cycling synchrotrons (RCS) up to the multi-TeV collision energy. To maximise the number of muons available in the collider, it is essential to exploit the time dilation of the muon lifetime by employing a large accelerating gradient. The 1.3 GHz TESLA cavity serves as the baseline for the RCS chain. Considering the high bunch population and the small aperture of the cavity, the resulting beam-induced voltage per bunch passage is considerable, resulting in a substantial perturbation of the cavity voltage for subsequent bunch passages. In this contribution, the effects of beam loading during the acceleration cycle on the muons are calculated with the objective of determining the optimum parameters for minimising the cavity voltage transients. The interaction of the induced voltages, considering the counter-rotating beams, is studied.

2024-11-30T12:56:52Z Appears in the proceedings of the 14th International Computational Accelerator Physics Conference (ICAP'24), 2-5 October 2024, Germany Leonard Thiele Fabian Batsch Rama Calaga Heiko Damerau Alexej Grudiev Ivan Karpov Ursula van Rienen http://arxiv.org/abs/2409.13415v2 2025-04-09T09:58:04Z

The present investigation reports the design and development of an advanced material with a high figure of merit (FoM) for beampipe applications in particle accelerators by bringing synergy between computational and experimental approaches. Machine learning algorithms have been used to predict the phase(s), low density, and high radiation length of the designed Al-Ti-V alloys. Al-Ti-V alloys with various compositions for single-phase and dual-phase mixtures, liquidus temperature, and density values are obtained using the Latin hypercube sampling method in TC Python Thermo-Calc software. The obtained dataset is utilized to train the machine-learning algorithms. Classification algorithms such as XGBoost and regression models such as Linear Regression and Random Forest regressor have been used to compute the number of phases, radiation length, and density respectively. The XGBoost algorithms show an accuracy of $98\%$, the Linear regression model shows an accuracy of $94\%$, and the Random Forest regressor model is accurate up to $99\%$. The developed Al-Ti-V alloys exhibit high radiation length as well as a good combination of high elastic modulus and toughness due to the synergistic effect of the presence of hard $Al_3Ti$ phase along with a minor volume fraction of FCC $(Al)_{ss}$ solid solution phase mixture. The comparison of our alloys, alloy-1 ($Al_{75.2}Ti_{22.8}V_{2}$) and alloy-2 ($Al_{89}Ti_{10}V_{1}$) shows an increase in the radiation length by seven-times and a decrease in the density by two to three times as compared to stainless steel 304, the preferred material for constructing beampipes in low-energy particle accelerators. Further, we experimentally verify the elastic modulus of the alloy-1 and compute the FoM equal to 0.416, which is better than other existing materials for beampipes in low-energy experiments.

2024-09-20T11:27:13Z Same as the published version Phys. Rev. Accel. Beams 28, 043101 (2025) Kamaljeet Singh Kangkan Goswami Raghunath Sahoo Sumanta Samal 10.1103/PhysRevAccelBeams.28.043101