https://arxiv.org/api/XjTBf9//W+HfTEc6ajVcXhAWPVg 2026-04-14T23:16:02Z 8745 600 15 http://arxiv.org/abs/2505.24585v1 2025-05-30T13:33:03Z

We developed, built, characterized on bench and beam-tested a permanent magnet (PM) Compact Wiggler (CW) prototype with a hydraulic assist gap-controlling mechanism. The prototype is of ~50cm long, 20cm wide and 40cm high and weights ~50kg. Magnetic structure has a 76.2mm period. At 6.5mm minimal gap the structure demonstrated ~2.3 Tesla peak field. At this gap, the magnet arrays attract each other with 7,990 N (1,796 lbf) force. Hydraulic system is employed to balance the attractive forces. Here we describe the mechanical and magnetic design, present some construction details and provide test results.

2025-05-30T13:33:03Z Alexander Temnykh Ivan Temnykh http://arxiv.org/abs/2505.16768v3 2025-05-30T07:45:48Z

The generation of intense, femtosecond-scale X-ray pulses is crucial for probing matter under extreme temporal and field conditions. Current chirped-pulse amplification (CPA) techniques in free-electron lasers (FELs), however, face efficiency limitations in the soft X-ray regime due to the inherent constraints of conventional optical compressors. To address this challenge, we propose a high-efficiency plasma-based compressor utilizing highly ionized noble gas plasma. Exploiting strong refractive index dispersion near ionic resonances, this scheme achieves over 70% transmission efficiency around 5.2 nm, and is extendable to other highly charged ions for operation across the soft X-ray to vacuum ultraviolet range. Simulations demonstrate that a 25 fs FEL pulse can be compressed to 1.4 fs with peak power boosted to over 100 GW, while maintaining high energy throughput. This approach overcomes the long-standing efficiency bottleneck of soft X-ray CPA and opens a scalable path toward compact, high-brightness attosecond FEL sources.

2025-05-22T15:08:21Z Mingchang Wang Li Zeng Bingbing Zhang Qinghao Zhu Xiaozhe Shen Xiaofan Wang Qinming Li Weiqing Zhang http://arxiv.org/abs/2505.22876v1 2025-05-28T21:17:39Z

The low-level RF (LLRF) systems for S-band linear accelerating structures are typically implemented with heterodyne base architectures. We have developed and characterized the next generation LLRF (NG-LLRF) based on the RF system-on-chip (RFSoC) for C-band accelerating structures, and the platform delivered the pulse-to-pulse fluctuation levels considerably better than the requirement of the targeted applications. The NG-LLRF system uses the direct RF sampling technique of the RFSoC, which significantly simplified the architecture compared to the conventional LLRF. We have extended the frequency range of the NG-LLRF to S-band and experimented with different RFSoC devices and system designs to meet the more stringent requirements for S-band LLRF applications. In this paper, the characterization results of the platform with different system architectures will be summarized and the high-power test results of the NG-LLRF with the S-band accelerating structure in the Next Linear Collider Test Accelerator (NLCTA) test facility at the SLAC National Accelerator Laboratory will be presented and analyzed.

2025-05-28T21:17:39Z Chao Liu Ankur Dhar Emma Snively Mohamed Othman Ryan Herbst Emilio A. Nanni http://arxiv.org/abs/2505.22872v1 2025-05-28T21:13:35Z

In various of particle accelerator designs, amplitude and phase modulation methods are commonly applied to shape the RF pulses for implementing pulse compressors or compensating for the fluctuations introduced by the high-power RF components and beam loading effects. Phase modulations are typically implemented with additional phase shifters that require drive or control electronics. With our recent next-generation LLRF (NG-LLRF) platform developed based on direct RF sampling technology of RF system-on-chip (RFSoC) devices, RF pulse shaping can be realized without the analogue phase shifters, which can significantly simplify the system architecture. We performed a range of high-power experiments in the C-band to evaluate the RF pulse-shaping capabilities of the NG-LLRF system at different stages of the RF circuits. In this paper, the high-power characterization results with the Cool Copper Collider (C3) structure driven by RF pulses with different modulation schemes will be described. With the pulse modulation and demodulation completely implemented in the digital domain, the RF pulse shaping schemes can be rapidly adapted for X-band structures simply by adding analogue mixers.

2025-05-28T21:13:35Z Chao Liu Ankur Dhar Ryan Herbst Emilio A. Nanni http://arxiv.org/abs/2505.22188v1 2025-05-28T10:00:31Z

By solving Maxwell's equations the exact dispersion equation for electromagnetic waves propagating in a layered coaxial ferrite line is obtained. In particular the analytical consideration is carried out for a simpler case of complete filling of the coaxial line with ferrite (i.e. homogeneous ferrite line). The behavior of dispersion curves of TEM - electromagnetic waves, as well as E - and H - waveguide electromagnetic waves, is investigated.

2025-05-28T10:00:31Z V. A. Balakirev I. N. Onishchenko http://arxiv.org/abs/2505.21654v1 2025-05-27T18:27:29Z

Particle physicists aim to construct a electron-positron Higgs factory as the next major particle collider. However, the high associated costs motivate the development of more affordable collider designs. Plasma-wakefield acceleration is a promising technology to this end. HALHF is a proposal for a Higgs factory that utilizes beam-driven plasma-wakefield acceleration to accelerate electrons to high energy with high gradient, while using radio-frequency acceleration to accelerate positrons to a lower energy. This asymmetry sidesteps a major difficulty in plasma acceleration: that of accelerating positrons with high efficiency and quality. Since publication, several challenges were identified in the original baseline design. We summarize the updated baseline design, which addresses these challenges, and describe the parameter- and cost-optimization process used to arrive at this design.

2025-05-27T18:27:29Z 4 pages, 2 figures, submitted as an IPAC'25 proceeding (MOCD1) Proceedings of the 16th International Particle Accelerator Conference, p. 53 (2025) C. A. Lindstrøm E. Adli J. B. B. Chen P. Drobniak E. E. Hørlyk D. Kalvik K. N. Sjobak T. Barklow S. Gessner M. Hogan M. Berggren A. Laudrain B. List J. List V. Maslov K. Põder M. Thévenet N. Walker J. Wood S. Boogert P. N. Burrows V. Cilento R. D'Arcy B. Foster S. Farrington X. Lu G. Moortgat-Pick A. Seryi 10.18429/JACoW-IPAC2025-MOCD1 http://arxiv.org/abs/2505.21313v1 2025-05-27T15:12:18Z

Plasma lensing provides compact focusing of electron beams, since they offer strong focusing fields (kT/m) in both planes simultaneously. This becomes particularly important for highly diverging beams with a large energy spread such as those typically originating from plasma accelerators. The lens presented here is a nonlinear active plasma lens, with a controlled focusing-strength variation purposely introduced in one transverse direction. This lens is a key element of a larger transport lattice, core of the ERC project SPARTA, which aims to provide a solution for achromatic transport between plasma-accelerator stages. We report on preliminary experimental results from the CLEAR facility at CERN, which aims to probe the magnetic field structure of the lens using an electron beam, in search of the desired nonlinearity, together with 2D plasma simulation results.

2025-05-27T15:12:18Z 4 pages, 2 figures, submitted as an IPAC'25 proceeding (MOPS027) Proceedings of the 16th International Particle Accelerator Conference, p. 641 (2025) P. Drobniak E. Adli H. B. Anderson K. N. Sjobak C. A. Lindstrøm A. Dyson S. M. Mewes M. Thévenet 10.18429/JACoW-IPAC25-MOPS027 http://arxiv.org/abs/2501.10602v2 2025-05-26T09:33:04Z

High efficiency is essential for plasma-wakefield accelerators to be a cost-effective alternative in high-power applications, such as a linear collider. However, in a plasma-wakefield accelerator the beam-breakup instability can be seeded by a transverse offset between the driver and trailing bunch. This instability, which rapidly increases the oscillation amplitude of the trailing bunch, grows with higher power-transfer efficiency from the driver to the trailing bunch [V. Lebedev et al., Phys. Rev. Accel. Beams 21, 059901 (2018)]. In this paper, we use particle-in-cell simulations to investigate the efficiency$\unicode{x2013}$instability relation that constrains the driver-to-trailing-bunch power-transfer efficiency in beam-driven plasma accelerators. We test the relation using a grid of simulations across all parameters that affect the beam-breakup instability, assuming a uniform accelerating field (optimal beam loading) and no ion motion. We find that the previously proposed efficiency$\unicode{x2013}$instability relation represents a lower limit on the strength of the instability for a given efficiency. For each normalized wake radius, only a certain accelerating field reaches this lowest value of the transverse instability; deviating from this point can increase the growth rate by several orders of magnitude. Lastly, we highlight how the oscillation-amplitude growth of the trailing bunch can be reduced or damped with an initial uncorrelated energy spread and the presence of ion motion.

2025-01-17T23:33:02Z 11 pages, 9 figures O. G. Finnerud C. A. Lindstrøm E. Adli http://arxiv.org/abs/2212.00763v2 2025-05-25T18:12:12Z

The theory of the strong force, Quantum Chromodynamics (QCD) remains one of the most important ways to understand the fundamental properties of ordinary matter. However, at low momentum transfer Q2, in the regime where the strong force becomes extremely strong, our understanding of QCD for ordinary nucleons becomes hazy. Several cutting edge theories such as Chiral Perturbation Theory and Lattice QCD have provided valuable predictions in this regime, but Lattice QCD has not yet extended predictions of many important quantities to this kinematic region, and Chiral Perturbation Theory has faced several important disagreements with experimental data for the neutron over the last several decades. It is therefore of extreme importance to have a benchmark of experimental data in the low energy regime for the proton's behavior, as a test of leading theories for the behavior of QCD in this regime. The E08-027 (g2p) experiment ran at Jefferson Lab in 2012 with the goal of collecting this valuable data. Full details of the g2p experiment and my experimental work at the University of New Hampshire are presented in this thesis, as well as a detailed description of the analysis process and the exciting benchmark results, which serve as a direct test of all current and future theories of QCD in the low-Q2 regime.

2022-12-01T18:50:38Z Ph.D. Dissertation, Approved 11/16/22 by the University of New Hampshire David Ruth http://arxiv.org/abs/2501.13863v3 2025-05-22T12:26:31Z

This theoretical study explores resonant elastic photon scattering in the presence of external electric and magnetic fields, motivated by potential applications in storage ring experiments, such as the Gamma Factory project at CERN. In this framework, resonant scattering involves head-on collisions of relativistic ion beams and counter-propagating laser photons, leading to a strong enhancement of the external field strength due to the Lorentz transformation between ion rest and laboratory frame. Calculations for He-like Ca ions reveal a notable impact of the external fields on the scattering rate as well as the angular distribution and polarization of emitted photons. This opens interesting avenues for diverse applications for the Gamma Factory project, such as as resonance condition tuning, beam cooling, and polarization control.

2025-01-23T17:34:02Z Jan Richter Mieczyslaw Witold Krasny Jan Gilles Andrey Surzhykov http://arxiv.org/abs/2505.16052v1 2025-05-21T22:05:49Z

Anomalies in radio-frequency (RF) stations can result in unplanned downtime and performance degradation in linear accelerators such as SLAC's Linac Coherent Light Source (LCLS). Detecting these anomalies is challenging due to the complexity of accelerator systems, high data volume, and scarcity of labeled fault data. Prior work identified faults using beam-based detection, combining RF amplitude and beam-position monitor data. Due to the simplicity of the RF amplitude data, classical methods are sufficient to identify faults, but the recall is constrained by the low-frequency and asynchronous characteristics of the data. In this work, we leverage high-frequency, time-synchronous RF phase data to enhance anomaly detection in the LCLS accelerator. Due to the complexity of phase data, classical methods fail, and we instead train deep neural networks within the Coincident Anomaly Detection (CoAD) framework. We find that applying CoAD to phase data detects nearly three times as many anomalies as when applied to amplitude data, while achieving broader coverage across RF stations. Furthermore, the rich structure of phase data enables us to cluster anomalies into distinct physical categories. Through the integration of auxiliary system status bits, we link clusters to specific fault signatures, providing additional granularity for uncovering the root cause of faults. We also investigate interpretability via Shapley values, confirming that the learned models focus on the most informative regions of the data and providing insight for cases where the model makes mistakes. This work demonstrates that phase-based anomaly detection for RF stations improves both diagnostic coverage and root cause analysis in accelerator systems and that deep neural networks are essential for effective analysis.

2025-05-21T22:05:49Z 16 pages, 9 figures Jia Liang William Colocho Franz-Josef Decker Ryan Humble Ben Morris Finn H. O'Shea David A. Steele Zhe Zhang Eric Darve Daniel Ratner http://arxiv.org/abs/2505.15673v1 2025-05-21T15:51:48Z

We present a study of high-$β$* optics configurations at Interaction Point 2 (IP2) of the Large Hadron Collider (LHC), developed to enable forward and diffractive physics measurements with the ALICE experiment during Runs 3 and 4. Using MAD-X, we designed a $β$* = 30 m optics scheme that satisfies beam stability and aperture requirements, while offering improved sensitivity to small-angle scattering. The configuration follows the Achromatic Telescopic Squeeze (ATS) optics scheme, originally developed for IP1 and IP5, which provides enhanced control over phase advance and chromaticity. The resulting optics layout enables a forward physics program with continuous data-taking. We also outline possible extensions toward even higher $β$* values and discuss the implementation roadmap.

2025-05-21T15:51:48Z 8 pages, 5 figures. Focus on optics matching and forward physics motivation at IP2. Intended for arXiv:hep-ex Sorina Popescu http://arxiv.org/abs/2503.20637v2 2025-05-21T14:06:36Z

With the recent implementation of a radio-frequency quadrupole (RFQ) cooler-buncher and a multi-step laser resonance ionization technique, our previously developed collinear laser spectroscopy setup has been successfully upgraded into a fully functional collinear resonance ionization spectroscopy system. The new system was fully characterized using a bunched ion beam at 30~keV, during which hyperfine structure spectra of $^{85,87}$Rb isotopes were measured. An overall efficiency exceeding 1:200 (one resonant ion detected for every 200 ions after the RFQ cooler-buncher) was achieved while maintaining a spectral resolution of 100 MHz. Under these conditions, the extracted hyperfine structure parameters and isotope shift for $^{85,87}$Rb show excellent agreement with the literature values. These results demonstrate the system's capability to perform high-resolution and high-sensitivity laser spectroscopy of neutron-rich Rb isotopes, which are expected to be produced at the Beijing Radioactive Ion-beam Facility at a rate of approximately 100 particles per second.

2025-03-26T15:32:37Z H. R. Hu Y. F. Guo X. F. Yang Z. Yan W. C. Mei S. J. Chen Y. S. Liu P. Zhang S. W. Bai D. Y. Chen Y. C. Liu S. J. Wang Q. T. Li Y. L. Ye C. Y. He J. Yang Z. Y. Liu http://arxiv.org/abs/2502.20915v2 2025-05-21T08:14:14Z

Generating a mono-energetic, high-energy muon beam using accelerator facilities can be very attractive for many purposes, for example, improving muon tomography currently limited by the low flux and wide energy spread of cosmic ray muons, and searching for muon related new physics beyond the Standard Model. One potential accelerator facility is the High Intensity Heavy-Ion Accelerator Facility (HIAF), which is currently under construction in Huizhou City, China. Considering the projectile energy and beamline length, a high-intensity and GeV-energy muon flux could be produced and delivered by the High Energy Fragment Separator beamline of the HIAF facility. In this paper, the flux intensity and purity of muon beam based on HIAF are discussed in detail. For the $μ^+$ beam, the highest muon yield reaches $8.2 \times 10^6 ~ μ$/s with the purity of approximately $2\%$ at a momentum of 3.5 GeV/c; meanwhile, for the $μ^-$ beam, the maximum muon yield is 4.2 $\times 10^6 ~ μ$/s with the purity of around $20\%$ at a momentum of 1.5 GeV/c. The results also indicate that, for muon beams with an energy of several GeV, by applying a suitable purification strategy, we can get a muon beam with a purity of 100\% and an intensity of the order of $10^5 ~ μ$/s.

2025-02-28T10:16:27Z 12 pages, accepted for publication in the PHYSICAL REVIEW ACCELERATORS AND BEAMS Yu Xu Xueheng Zhang Yuhong Yu Pei Yu Li Deng Jiajia Zhai Liangwen Chen He Zhao Lina Sheng Guodong Shen Ziwen Pan Qite Li Chen Zhou Qiang Li Lei Yang Zhiyu Sun http://arxiv.org/abs/2505.14834v1 2025-05-20T18:57:35Z

The magnetization of ReBCO tape stacks and tape stack cables in high magnetic fields (up to 30 T) are not commonly reported. Here we report magnetization measurements of tape stack cables in magnetic fields up to 30 T at 4.2 K. We observed that flux jumps, commonly relegated to low field regimes for single tapes, persisted up to 17 T in tape stacks, an effect which could have substantial technological relevance for high field applications including fusion devices or accelerator magnets. On the other hand, with the use of small spacers, we could suppress flux jump behavior, in some cases eliminating jumps entirely. Our findings provide critical insights for the optimization of designs for ReBCO cables for high-field applications, including fusion magnets and particle accelerators.

2025-05-20T18:57:35Z 9 pages, 3 figures, 1 table Scientific Reports (published online 19 Nov 2025) Tushar Garg Center for Superconducting and Magnetic Materials, Materials Science Department, Ohio State University Mike D. Sumption Center for Superconducting and Magnetic Materials, Materials Science Department, Ohio State University Milan Majoros Center for Superconducting and Magnetic Materials, Materials Science Department, Ohio State University Edward Collings Center for Superconducting and Magnetic Materials, Materials Science Department, Ohio State University Jan Jaroszynski National High Magnetic Field Laboratory Eun-Sang Choi National High Magnetic Field Laboratory 10.1038/s41598-025-24605-4