https://arxiv.org/api/Oguizf32Y6QUdG5oWqsGrYGKrdA 2026-03-22T16:10:41Z 8715 60 15 http://arxiv.org/abs/2602.17000v1 2026-02-19T01:49:24Z

Superconducting waveguides are a promising platform for ultralow-loss transmission in the millimeter-wave to terahertz band under cryogenic conditions, with potential applications in astronomical instrumentation and emerging quantum technologies. We develop a framework, based on microscopic superconductivity theory, to evaluate the power-flow attenuation constant $α$ of superconducting rectangular waveguides in the $100~\mathrm{GHz}$--THz range, applicable to arbitrary electronic mean free paths $\ell$ from the dirty limit $\ell\llξ_0$ to the clean limit $\ell\ggξ_0$. We also derive an analytical expression for two-level-system (TLS)-induced attenuation $α_{\rm TLS}$ in thin native oxide layers within the standard TLS model. Using this framework, we perform numerical evaluations of $α$ for representative materials over standard waveguide sizes from WR15 to WR1. In the high-frequency regime $f \gtrsim 0.5 Δ/h$, low attenuation favors the clean regime $\ell\gtrsimξ_0$, indicating that high-purity materials can achieve very low attenuation below their gap frequency. For the TLS contribution, using parameter values representative of native Nb oxides, we find that $α_{\rm TLS}$ can become relevant at sufficiently low temperatures $T/T_c\lesssim 0.1$-0.2, where quasiparticle dissipation is exponentially suppressed. Finally, we extend the discussion to the strong-excitation regime using a recently developed nonlinear-response theory within the Keldysh--Usadel framework of nonequilibrium superconductivity and show that nonlinear dissipation produces a Higgs-mode peak in $α$ near $f\simeq Δ/h$ via a Kerr-type nonlinearity of the dissipative conductivity. This peak provides a distinct hallmark of the Higgs mode that has been largely overlooked so far.

2026-02-19T01:49:24Z 16 pages, 12 figures Takayuki Kubo http://arxiv.org/abs/2602.16672v1 2026-02-18T18:09:08Z

This study investigates how target geometry and material influence pion and muon production from an 8 GeV proton beam, in support of target-system design for a muon collider demonstrator. A 2 m long, 0.7 m radius solenoid with a 5 T peak magnetic field is used to capture secondary particles, with the target positioned at its center. We examine how variations in target radius, length, and material affect secondary-beam yield and emittance at the solenoid exit. In parallel, we evaluate temperature rise within the target to assess material limitations and guide future work on thermal and structural survivability. The results provide initial intuition for optimizing both particle yield and target durability in muon collider front-end systems.

2026-02-18T18:09:08Z Presented at the 32nd International Symposium on Lepton Photon Interactions at High Energies, Madison, Wisconsin, USA, August 25 to 29, 2025 Ruaa Al-Harthy http://arxiv.org/abs/2602.16624v1 2026-02-18T17:18:25Z

The self-modulation (SM) instability transforms a long charged particle bunch traveling in plasma into a train of microbunches that resonantly drives large-amplitude wakefields. We present the first determination of the saturation length of SM using experimental and numerical results. The saturation length is the distance over which wakefields reach their maximum amplitude along the plasma. By varying the plasma length and measuring the radius of the transverse distribution of the bunch, we find that the saturation length of SM decreases with plasma density and initial field amplitude, e.g., when seeding. The saturation length is a fundamental parameter of the instability, and these results are key for understanding SM and designing plasma wakefield accelerators driven by long bunches, such as AWAKE, or by long laser pulses for radiation production.

2026-02-18T17:18:25Z 8 pages, 4 figures A. Clairembaud M. Turner M. Bergamaschi L. Ranc F. Pannell J. Mezger H. Jaworska N. van Gils J. Farmer P. Muggli the AWAKE Collaboration http://arxiv.org/abs/2602.16529v1 2026-02-18T15:17:12Z

Channeling radiation in oriented crystals arises from transitions between quantized transverse bound states in the MeV regime and is strongly affected by thermal diffuse scattering through population transfer and decoherence. A frozen-phonon multislice propagation framework is developed to track a reduced transverse Hilbert space spanned by selected bound-state manifolds using configuration-resolved projection amplitudes. Beyond reproducing transition energies, the method yields reduced manifold density matrices, thermal population kinetics, and depth-resolved coherence metrics. Applied to axial electron channeling in $\langle100\rangle$ diamond at 16.9 MeV, the results show approximately exponential population loss with strongly state-dependent feeding among low-lying manifolds. For an initial coherent superposition in the degenerate 2p manifold, the intra-manifold purity relaxes toward the maximally mixed limit, consistent with thermally induced random basis rotations. Under 1s initial excitation, population transferred into the 2p and 3d manifolds remains close to maximally mixed, while weak cross-manifold coherences persist. The framework enables quantitative analysis of thermal population dynamics, decoherence, and their links to spontaneous and coherently driven emission observables across a broad range of crystal structures.

2026-02-18T15:17:12Z Tadas Paulauskas http://arxiv.org/abs/2602.15992v1 2026-02-17T20:29:09Z

The paper will present SVAROG, a compact neutron supermirror transmission multichannel polarizer with an electromagnetic system. The basic properties of this polarizer will be considered. Variants for using this polarizer in experimenrtla facilities of the PIK research reactor (Petersburg Nuclear Physics Institute of National Research Centre «Kurchatov Institute» (NRC «Kurchatov Institute» - PNPI)) will be discussed and a comparison of the considered polarizer with known neutron transmission polarizers will be carried out.

2026-02-17T20:29:09Z 57 pages, 67 figures, 3 tables V. G. Syromyatnikov S. Yu. Semenikhin M. V. Lasitsa http://arxiv.org/abs/2602.15777v1 2026-02-17T18:06:54Z

The focusing of particle beams for collider experiments is crucial for maximizing the luminosity and thus the discovery potential of these machines. In recent years, plasma wakefield acceleration has emerged as a leading candidate for achieving higher energy collisions with smaller facility footprints due to the large accelerating gradients in the plasma. This higher beam energy poses significant challenges for the final focusing system of the collider. Here, we discuss the various challenges of final focusing for TeV-scale plasma accelerators and propose possible solutions. Finally, we present the first design of a final focusing system for a 10 TeV linear wakefield collider, evaluate its performance, and discuss its shortcomings as well as improvements for future designs.

2026-02-17T18:06:54Z 11 pages, 6 figures, 4 tables Keegan Downham University of California, Santa Barbara SLAC National Accelerator Laboratory Spencer Gessner SLAC National Accelerator Laboratory Lewis Kennedy CERN Rogelio Tomás CERN Andrei Seryi Old Dominion University http://arxiv.org/abs/2509.25423v2 2026-02-16T22:54:04Z

Electropolishing is the premier surface preparation method for high-Q, high-gradient superconducting RF cavities made of Nb. This leaves behind an apparently smooth surface, yet the achievable peak magnetic fields fall well below the superheating field of Nb, in most cases. In this work, the ultimate surface finish of electropolishing was investigated by studying its effect on highly polished Nb samples. Electropolishing introduces high slope angle sloped-steps at grain boundaries. The magnetic field enhancement and superheating field suppression factors associated with such a geometry are calculated in the London theory. Despite the by-eye smoothness of electropolished Nb, such defects compromise the stability of the low-loss Meissner state, likely limiting the achievable peak accelerating fields in superconducting RF cavities. Finally, the impact of surface roughness on impurity diffusion is investigated which can link surface roughness to the effectiveness of heat treatments like low-temperature baking or nitrogen infusion in the vortex nucleation or hydride hypotheses. Surface roughness tends to decrease the effective dose of impurities as a result of the expansion of impurities into regions with greater internal angle. The effective dose of impurities can be protected by minimizing slope angles and step heights, ensuring uniformity.

2025-09-29T19:31:12Z Accepted for publication in Superconductor Science and Technology 2026 Supercond. Sci. Technol. 39 025014 Oleksandr Hryhorenko Anne-Marie Valente-Feliciano Eric M. Lechner 10.1088/1361-6668/ae40a3 http://arxiv.org/abs/2602.15205v1 2026-02-16T21:35:42Z

The focus of this educational text is selected examples of high-frequency electronic circuits and their components employed for the accurate phasing and synchronisation of accelerator cavities. Examples have been chosen to describe the basics of RF electronics. The starting point is transmission lines, connectors, discontinuities, and the handling of reflection. The application of simple surface mount components is discussed. The use of the Kuroda identities for converting lumped circuit designs to printed circuit designs is demonstrated. The accelerator example used to demonstrate the use of components is a circuit designed for the synchronisation of the CLIC crab cavities. This example employs co-planar waveguide, SMA connectors, Wilkinson splitters, and surface-mount double-balanced mixers. For the control of cavity phase and amplitude, the benefit of I&Q controllers will be explained. The text will then discuss the operation and use of I&Q modulators and VCOs.

2026-02-16T21:35:42Z 38 pages, contribution to the CAS - CERN Accelerator School: RF for Accelerators, 18 June - 01 July 2023, Berlin Germany Amos Christopher Dexter http://arxiv.org/abs/2602.14824v1 2026-02-16T15:16:14Z

This paper presents experimental validation of the homogenized harmonic balance finite element method (HomHBFEM), which we have developed as a dedicated simulation technique for magnets with fast excitation cycles, in particular the fast corrector (FC) magnets for PETRA IV at DESY. The HomHBFEM allows efficient three-dimensional nonlinear eddy-current simulations of laminated magnets at elevated frequencies with a relatively coarse finite element (FE) mesh and without computationally expensive time-stepping. This is achieved by combining a frequency-domain-based homogenization technique with the harmonic balance FE method. The simulation results for the magnetic flux density along the axis of the FC magnets as a function of frequency and the resulting integrated transfer function (ITF) are compared to Hall probe and search coil measurements of the first prototype FC magnet for PETRA IV. A good agreement between simulated and measured ITFs is achieved for excitation frequencies from 10 Hz to 10 kHz.

2026-02-16T15:16:14Z 12 pages, 23 figures Jan-Magnus Christmann Laura Anna Maria D'Angelo Herbert De Gersem Sven Pfeiffer Sajjad Hussain Mirza Adeel Amjad Lucas Rousselange Matthias Thede http://arxiv.org/abs/2602.14734v1 2026-02-16T13:24:55Z

Regenerative amplifier x-ray free-electron lasers constitute alternative configurations for fourth generation light sources which are typically operated in self-amplified spontaneous emission (SASE) mode. However, SASE exhibits relatively large fluctuations in the power and spectral properties from shot to shot, whereas XRAFELs provide a much more stable source of hard x-ray photons. Here, we study the performance of an x-ray cavity under consideration at the Stanford Linear Accelerator Facility using both uniform and step-tapered undulators with either transmissive or hole out-coupling.

2026-02-16T13:24:55Z 6 pages, 12 figures Henry P. Freund P. J. M. van der Slot P. G. O'Shea http://arxiv.org/abs/2602.01504v3 2026-02-16T09:32:25Z

Three-dimensional spiral injection enables beam storage in ultra-compact rings with nanosecond revolution periods. We report first storage of a $297 \, \mathrm{keV/}c$ electron beam in a $22 \,\mathrm{cm}$ weak-focusing ring with a $4.7\,\mathrm{ns}$ revolution period using a $140\,\mathrm{ns}$ kicker pulse. A scintillating-fiber detector observes signals $>5σ$ above noise for $\geq 1\, \mathrm{μs}$, and varying the weak-focusing field potential shifts the stored-beam region, consistent with Monte Carlo predictions, validating beam storage. This proof-of-principle opens a path to ultra-compact storage rings for next-generation precision measurements.

2026-02-02T00:33:47Z 5 pages, 4 figures. Submitted to Physical Review Letters R. Matsushita H. Iinuma S. Ohsawa H. Nakayama K. Furukawa S. Ogawa N. Saito T. Mibe M. A. Rehman http://arxiv.org/abs/2602.14555v1 2026-02-16T08:35:02Z

We study relativistic twisted (orbital-angular-momentum) states of a massive charged particle propagating through an axially symmetric, longitudinally inhomogeneous solenoid field and a co-directed accelerating or decelerating electric field. Starting from the Dirac equation and using controlled spinless and paraxial approximations, we show that the transverse envelope obeys an effective nonstationary Schrödinger equation governed by a Caldirola--Kanai Hamiltonian. The longitudinal energy gain or loss encoded in $f(z)=[E_0-V(z)]^2-m^2$ generates an effective gain or damping rate $\widetildeγ(z)=\partial_z f(z)/[2f(z)]$ and a $z$-dependent oscillator frequency $\widetildeω(z)=p_0Ω(z)/\sqrt{f(z)}$. Exploiting the Ermakov mapping (unitary equivalence of Caldirola--Kanai systems), we obtain a closed-form propagated twisted wave function by transforming the stationary Landau basis. The transverse evolution is controlled by a single scaling function $b(z)$ that satisfies a generalized Ermakov--Pinney equation with coefficients determined by $E_z(z)$ and $B_z(z)$. In the limiting cases of uniform acceleration with $B_z=0$ and of solenoid focusing with negligible acceleration, our solution reduces to previously known analytic results, providing a direct bridge to established models.

2026-02-16T08:35:02Z 9 pages, 2 figures N. V. Filina S. S. Baturin http://arxiv.org/abs/2512.08442v4 2026-02-16T08:33:19Z

The generation of relativistic vortex electron beams via photoemission requires ultraviolet laser beams with well-controlled orbital angular momentum (OAM) and compatibility with radio-frequency (RF) photoinjector drive-laser systems. High-OAM vortex beams at a wavelength of 266 nm are generated using three fabricated diffractive optical elements integrated into an operational photoinjector beamline: a reflective fork grating, a high-topological-charge spiral phase plate, and binary axicons. The spiral phase plate produces a high-purity Laguerre-Gaussian mode with an OAM of l = 64 and a conversion efficiency of 80%, whereas binary axicons generate low-divergence quasi-Bessel beams forming a superposition of multiple OAM states with a finite OAM bandwidth imposed by their binary phase structure. Fork gratings provide flexible access to lower OAM values and enable robust modal diagnostics. The generated beams are characterized using cylindrical-lens mode conversion and radial intensity analysis, demonstrating practical control of both the OAM content and spectral bandwidth of ultraviolet structured light for accelerator-based applications.

2025-12-09T10:15:02Z A. S. Dyatlov D. M. Dolgintsev V. V. Gerasimov V. V. Kobets V. P. Nazmov M. A. Nozdrin A. N. Sergeev D. S. Shokin K. E. Yunenko D. V. Karlovets http://arxiv.org/abs/2602.14298v1 2026-02-15T20:13:37Z

The period 1980-2000 saw the impressive development of applied superconductivity in high-energy particle accelerators, from single components to long strings of superconducting magnets and high-frequency acceleration cavities. Large and powerful cryogenic systems were designed ancillary to superconducting devices operating generally close to the normal boiling point of helium, but also above 4.2 K in supercritical and below 2 K in superfluid. Low-temperature operation in accelerators also involves considerations of ultra-high vacuum, limited stored energy and beam stability. We recall the rationale for cryogenics in high-energy particle accelerators and review its development over the period of interest, with reference to the main engineering domains of cryostat design and heat loads, cooling schemes, efficient power refrigeration and cryogenic fluid management. In view of its importance and novelty, a specific section is devoted to the developments that led to the LHC at CERN.

2026-02-15T20:13:37Z Invited presentation at the 4th Symposium on the History of Particle Physics CERN, Geneva, 10-13 November 2025 Philippe Lebrun http://arxiv.org/abs/2509.00732v4 2026-02-14T15:17:36Z

We present beam-dynamics simulations for an S-band RF photoinjector test bench under development at the Joint Institute for Nuclear Research, aimed at producing high-quality electron beams and enabling future generation of relativistic vortex electrons with a quantized orbital angular momentum (OAM). Simulations of the 1.5-cell photogun are performed assuming an RF gradient of 45 MV/m, which, in accordance with our simulations with CST Studio, corresponds to the currently achieved input RF power of 3 MW. At low charge (Q = 0.63 pC), stable bunch formation is obtained, with weak space-charge effects and transverse emittance dominated by RF-induced correlations. Optimization of the injection phase and cathode solenoid results in a robust emittance-compensated regime with a final normalized emittance of 2.08 pi mm mrad. To assess prospects for accelerating vortex electron beams, we additionally model the quantum evolution of single-electron Laguerre-Gaussian wave packets. The results show that multi-MeV acceleration suppresses free-space spreading of the electron packet and preserves the packet's initial OAM structure, indicating that the test bench provides suitable conditions for forthcoming experimental studies of relativistic vortex electrons.

2025-08-31T07:52:04Z A. S. Dyatlov V. V. Kobets A. E. Levichev M. V. Maksimov D. A. Nikiforov M. A. Nozdrin K. Popov K. A. Sibiryakova K. E. Yunenko D. V. Karlovets