Strategy for Bayesian Optimized Beam Steering at TRIUMF-ISAC's MEBT and HEBT Beamlines

2025-07-15T17:01:07Z

In preparation for operation of multiple Rare Isotope Beams (RIBs) when the Advanced Rare Isotope Laboratory (ARIEL) becomes operational, TRIUMF embarked on a program of advanced beam tuning applications and machine learning tools. The strategy for operationalizing Bayesian Optimization for beam steering purposes is being developed. A previously reported centroid correction algorithm is used to tune accelerated charged particle beams at TRIUMF's ISAC postaccelerator facility. We present findings and results from multiple machine development experiments conducted between October and November 2024, as part of a pivot toward semi-automated machine tuning methods. These findings were instrumental in shaping the tuning strategy for the medium and high energy beam transport (MEBT, HEBT) lines at ISAC, by sequentially optimizing sub-sections of the beamlines.

Recovery of hydrogen plasma at the sub-nanosecond timescale in a plasma-wakefield accelerator

2025-07-15T11:43:25Z

Plasma wakefield acceleration revolutionized the field of particle accelerators by generating gigavolt-per-centimeter fields. To compete with conventional radio-frequency (RF) accelerators, plasma technology must demonstrate operation at high repetition rates, with a recent research showing feasibility at megahertz levels using an Argon source that recovered after about 60 ns. Here we report about a proof-of-principle experiment that demonstrates the recovery of a Hydrogen plasma at the sub-nanosecond timescale. The result is obtained with a pump-and-probe setup and has been characterized for a wide range of plasma densities. We observed that large plasma densities reestablish their initial state soon after the injection of the pump beam (< 0.7 ns). Conversely, at lower densities we observe the formation of a local dense plasma channel affecting the probe beam dynamics even at long delay times (> 13 ns). The results are supported with numerical simulations and represent a step forward for the next-generation of compact high-repetition rate accelerators.

Excitation of Giant Surface Waves During Laser Wake Field Acceleration

2025-07-14T16:58:59Z

We have detected the presence of very high intensity surface waves that are excited during plasma waveguided laser wakefield acceleration. Wakefield acceleration can be enchanced by the introduction of an ``all optical" plasma waveguide that confines and guides a laser pulse at the optimal intensity over long distances, producing quasimonoenergetic multi-GeV electron bunches. However strong pulses of radio frequency radiation (RF) are also produced, and particle in cell simulations show why: a continuous stream of multi-MeV electrons are also ejected radially from the plasma due to nonlinear wave breaking, and these excite and copropagate coherently with a giant cylindrical Sommerfeld surface wave. Laboratory measurements, simulations, and analytic approximations all converge on a 20 J laser pulse exciting a 1 Joule, 400 GW broadband THz surface wave, with a peak electric field strength of 35 GV/m.

Characteristics of dark current from an S-band rf gun with exchangeable photocathode system

2025-07-14T12:30:29Z

Field emission or dark current from RF electron guns is problematic for accelerators for several reasons, and can be more difficult to predict, measure and understand, compared to the main beam. The work presented here is a study of the dark current emitted from the CLARA 3GHz 2.5 cell electron gun with exchangeable photocathode, which is a type of gun used for single pass high quality low emittance beams for uses such as Free Electron Lasers. The main purpose of these studies was to identify sources of dark current emission within the gun, by examining the dark current distribution and patterns on scintillating screens. It is shown that the features of the patterns can be reproduced qualitatively, and to some extent quantitatively, by finite element simulations. Thus, certain surfaces within the gun and cathode apparatus which contribute most significantly to problematic dark current can be identified, and further development and preparation of the guns and their cathodes can be informed to minimise dark current.

Design of an Active Thomson Parabola for the detection of ions accelerated by laser: Numerical simulations and characterization of different solutions

2025-07-11T16:07:55Z

This article describes the development of an active Thomson Parabola ion spectrometer designed to measure the energy spectra of different multi-MeV ion species generated in laser-plasmas interactions. To do so, GEANT4 optical simulations were carried out in order to design and build a spectrometer based on scintillator detectors capable of operating at rates comparable with the highest achievable at any existing or upcoming high intensity laser facilities. Details on the different configurations simulated and their characterization are discussed.

Optimizing Superconducting Nb Film Cavities by Mitigating Medium-Field Q-Slope Through Annealing

2025-07-11T14:41:57Z

Niobium films are of interest in applications in various superconducting devices, such as superconducting radiofrequency cavities for particle accelerators and superconducting qubits for quantum computing. In this study, we addressed the persistent medium-field Q-slope issue in Nb film cavities, which, despite their high-quality factor at low RF fields, exhibit a significant Q-slope at medium RF fields compared to bulk Nb cavities. Traditional heat treatments, effective in reducing surface resistance and mitigating the Q-slope in bulk Nb cavities, are challenging for niobium-coated copper cavities. To overcome this challenge, we employed DC biased high-power impulse magnetron sputtering to deposit niobium film onto a 1.3 GHz single-cell elliptical bulk niobium cavity, followed by annealing treatments aimed at modifying the properties of the niobium film. In-situ annealing at 340 °C increased the quench field from 10.0 to 12.5 MV/m. Vacuum furnace annealing at 600 °C and 800 °C for 3 hours resulted in a quench field increase of 13.5 and 15.3 MV/m, respectively. Further annealing at 800 °C for 6 hours boosted the quench field to 17.5 MV/m. Additionally, the annealing treatments significantly reduced the field dependence of the surface resistance. However, increasing the annealing temperature to 900 °C induced a Q-switch phenomenon in the cavity. The analysis of RF performance and material characterization before and after annealing has provided critical insights into how the microstructure and impurity levels in Nb films influence the evolution of the Q-slope in Nb film cavities. Our findings highlight the significant roles of hydrides, high local misorientation, and lattice and surface defects in driving field-dependent losses.

Spin-Orbit Structure and Helicity Anomaly in Relativistic Electron Vortex Beams

2025-07-11T11:17:20Z

The relativistic electron vortex beam (REVB) has attracted increasing attention due to its nontrivial spin-orbit structure recently. As relativistic electrons are governed by the Dirac equation, exact solutions to this equation provide the most reliable starting point for understanding angular momentum characteristics of REVBs. In this work, a set of exact eigensolutions of the Dirac equation are derived in a complex cylindrical coordinate system using a generalized series expansion method. We demonstrate that the eigenstate carries net angular momentum with the vortex charge being the quantum number of the total angular momentum along the propagation direction and deduce the explicit expression for the intrinsic spin-orbit coupling strength. Furthermore, we show that helicity, which exhibits anomaly in the vortex state, can serve as a practical characterizing quantity for the REVB. This work lays a theoretical foundation for further exploration of REVBs in both theory and experiment.

Differentiable simulations for particle tracking in accelerators: analysis, benchmarking and optimization

2025-07-11T10:38:10Z

Optimization of beamlines and lattices is a common problem in accelerator physics, which is usually solved with semi-analytical methods and numerical optimization routines. However, these are usually of the gradient-free or finite-differences type, whose computational cost grows quickly with the number of optimization parameters. On the other hand, the cost of gradient-based optimization can scale well with the number of parameters, but only if the computation of the gradient is itself efficient (e.g. not via finite differences, which are inefficient). Recently, there has been an emergence of so-called "differentiable" codes that efficiently provide gradients. Nevertheless, analysis and benchmarking comparisons of these techniques have largely been absent from the literature. In this work, we develop our own differentiable code, via auto-differentiation. We analyze and benchmark differentiability against finite differences in two test cases, a space-charge FODO cell from the literature and a realistic future beamline at CERN. The analyses and benchmarking are done both theoretically and empirically. Finally, we embed the gradient provided by the differentiable code in gradient-based optimization routines and compare with gradient-free methods. This work offers the first such analysis and benchmarking and thus contributes towards the development of more efficient and performant particle accelerators.

Theoretical study of the ECRIPAC accelerator concept

2025-07-11T07:42:27Z

The Electron Cyclotron Resonance Ion Plasma ACcelerator (ECRIPAC) is an original concept for a plasma-based particle accelerator able to generate pulsed ion beams with adjustable energy, targeting mostly medical applications. In a complementary letter (Cernuschi et al., arXiv:2507.07827) we thoroughly reviewed and corrected the current literature on the subject, including also an original theoretical investigation on the influence of several physical parameters on the accelerator stability. This study led to the proposal of a compact demonstrator device, which has been validated through Monte Carlo simulations. The present paper provides a detailed and more extended explanation of the ECRIPAC working principle and physics, including mathematical derivations for several physical formulas. Moreover, several other parameters have been included in the accelerator stability study, providing an overview of achievable external fields and plasma characteristics allowing a stable ion acceleration.

Milestone toward an ECRIPAC accelerator demonstrator

2025-07-10T15:00:20Z

The Electron Cyclotron Resonance Ion Plasma ACcelerator (ECRIPAC) is an original accelerator concept proposed in the nineties for the generation of highly energetic pulsed ion beams, suitable for a wide array of applications. The initial studies on the subject were characterized by an important calculation mistake, leading to an incomplete and erroneous literature on the topic. Nevertheless, the simple and well mastered techniques involved in the system (radio frequency and magnetic field), together with the device compactness, are strong motivations for further studies on ECRIPAC. The working principle and physical theory behind the ECRIPAC accelerator concept are thoroughly reviewed in this paper, incorporating significant corrections to the existing literature on the subject, making this work a suitable reference for future studies. A detailed theoretical investigation of the stability condition for the ion acceleration is presented, highlighting more stringent limitations than previously anticipated. Next, the impact of several physical parameters on the accelerator design is analyzed. This study led to the design of a compact demonstrator device able to accelerate He2+ ions up to 9.5 MeV per nucleon inside a 1.8 m long accelerating cavity. Finally, the results of a Monte-Carlo simulation, developed to model the electron dynamics inside the system, are used to validate the theoretical framework of ECRIPAC.

Estimation of superconducting cavity bandwidth and detuning using a Luenberger observer

2025-07-10T14:06:47Z

Enabled by progress in superconducting technology, several continuous wave linear accelerators are foreseen in the next decade. For these machines, it is of crucial importance to track the main cavity parameters, such as the resonator bandwidth and detuning. The bandwidth yields information on the superconducting state of the cavity. The detuning should be minimized to limit the required power to operate the cavity. The estimation of these parameters is commonly implemented in the digital electronics of the Low-Level RF control system to minimize the computation delay. In this proceeding, we present a way to compute the bandwidth and detuning using a Luenberger observer. In contrast to previous methods, a state observer yields estimations at the native control system sample rate without explicitly filtering the input signals. Additionally, the error convergence properties of the estimations can be controlled intuitively by adjusting gain parameters. Implementation considerations and test results on the derived observer are presented in the manuscript.

Single-particle Non-linear Beam Dynamics

2025-07-10T13:34:58Z

The investigation of single-particle dynamics in circular particle accelerators can be traced back to pioneering works in the 1950s. Traditionally, the design of new circular accelerators has focused on optimising linear dynamics, striving to minimise non-linear effects. When encountered, these effects were managed using suitable correction techniques. However, in recent years, this methodology has undergone significant reconsideration, leading to a more favourable view of non-linear beam dynamics. Notably, several new concepts have been promoted to improve the description and modelling of non-linear beam dynamics. Furthermore, new proposals have emerged that leverage the extensive potential of non-linear beam dynamics to enhance the control and manipulation of the characteristic features of charged particle beams. This article provides a detailed review and discussion of all these innovative approaches.

Design of a Storage Ring based on a Fixed Field Alternating Gradient Configuration with an Internal Target for Heavy-Ion Beams with Stochastic Charge State Conversions

2025-07-10T09:10:33Z

In the general use of a heavy-ion accelerator, an accelerated beam impinged on a target is spoiled into a beam dump. To make more efficient use of the beam, recycling of the beam passed through the target is proposed in the framework of the so-called energy recovery internal target (ERIT). In the ERIT system, the target is irradiated inside the circulating beam by recovering the energy lost in the target using rf cavities. So far, such a system has been realized only for proton beams. Here, the ERIT system for heavy-ion beam is demonstrated for the first time. A challenging issue is the circulation of all ions with different atomic charge. An ion has a probability of equilibrated charge state distribution after passing through the target, independent of the initial charge state. This phenomenon of stochastic charge state conversion (SCSC) causes rapid beam-emittance growth. To solve this problem, we developed a method to match the closed orbits and betatron functions of the beams in different charge states at the target location in a ring based on a scaling fixed field alternating gradient (FFA) lattice structure. We present the design of such an FFA ring and show, through full 6D beam tracking simulations, that transverse emittance growth can be effectively suppressed even in the presence of SCSC.

Collider-quality electron bunches from an all-optical plasma photoinjector

2025-07-10T02:59:22Z

We present a novel approach for generating collider-quality electron bunches using a plasma photoinjector. The approach leverages recently developed techniques for the spatiotemporal control of laser pulses to produce a moving ionization front in a nonlinear plasma wave. The moving ionization front generates an electron bunch with a current profile that balances the longitudinal electric field of an electron beam-driven plasma wave, creating a uniform accelerating field across the bunch. Particle-in-cell (PIC) simulations of the ionization stage show the formation of an electron bunch with 220 pC charge and low emittance ($ε_x = 171$ nm-rad, $ε_y = 76$ nm-rad). Quasistatic PIC simulations of the acceleration stage show that the bunch is efficiently accelerated to 20 GeV over 2 meters with a final energy spread of less than 1\% and emittances of $ε_x = 177$ nm-rad and $ε_y = 82$ nm-rad. This high-quality electron bunch meets the requirements outlined by the Snowmass process for intermediate-energy colliders and compares favorably to the beam quality of proposed and existing accelerator facilities. The results establish the feasibility of plasma photoinjectors for future collider applications making a significant step towards the realization of high-luminosity, compact accelerators for particle physics research.

Self-Adaptive Stabilization and Quality Boost for Electron Beams from All-Optical Plasma Wakefield Accelerators

2025-07-09T17:18:29Z

Shot-to-shot fluctuations in electron beams from laser wakefield accelerators present a significant challenge for applications. Here, we show that instead of using such fluctuating beams directly, employing them to drive a plasma photocathode-based wakefield refinement stage can produce secondary electron beams with greater stability, higher quality, and improved reliability. Our simulation-based analysis reveals that drive beam jitters are compensated by both the insensitivity of beam-driven plasma wakefield acceleration, and the decoupled physics of plasma photocathode injection. While beam-driven, dephasing-free plasma wakefield acceleration mitigates energy and energy spread fluctuations, intrinsically synchronized plasma photocathode injection compensates charge and current jitters of incoming electron beams, and provides a simultaneous quality boost. Our findings suggest plasma photocathodes are ideal injectors for hybrid laser-plasma wakefield accelerators, and nurture prospects for demanding applications such as free-electron lasers.