femto-PIXAR: a neural network method for reconstruction of femtosecond X-ray free electron laser pulse energy

2025-07-30T09:22:05Z

X-ray Free Electron Lasers (X\nobreakdash-FELs) operate in a wide range of lasing configurations for a broad variety of scientific applications at ultrafast time-scales such as structural biology, materials science, and atomic and molecular physics. Shot-by-shot characterization of the X-FEL pulses is crucial for analysis of many experiments as well as tuning the X-FEL performance. However, for the weak pulses found in advanced configurations, e.g. those needed for coherent, two-pulse studies of quantum materials, there is no current method for reliably resolving pulse profiles. Here we show that a physics-based U-net model can reconstruct the individual pulse power profiles for sub-picosecond pulse separation without the need for simulations. Using experimental data from weak X-FEL pulse pairs, we demonstrate we can learn the pulse characteristics on a shot-by-shot basis when conventional methods fail.

On operation and control of CW magnetrons for superconducting accelerators

2025-07-29T20:23:47Z

CW magnetrons, developed for industrial RF heaters, were suggested to feed RF cavities of superconducting accelerators due to higher efficiency and lower cost of RF power than provide traditionally used klystrons, IOTs or solid-state amplifiers. RF amplifiers driven by a master oscillator serve as coherent RF sources. CW magnetrons are regenerative RF auto generators with a huge regenerative gain. This causes regenerative instability with a notable noise when a magnetron operates as an auto generator i.e., with the anode voltage above the threshold of self-excitation. Traditionally, an injection locking by a small signal is used for phase stabilization of magnetrons. In this case CW magnetrons with the injection-locked (coherent) oscillations generate a notable level of noise. This may preclude use of CW magnetrons in this mode in the Superconducting RF (SRF) accelerators. This paper reviews PIC modeling and previously obtained experimental results for the operation and control of CW magnetrons, which led to the development of techniques most suitable for various SRF accelerators using forced RF oscillation of magnetrons, when the magnetron is launched by an injected forcing signal, and regenerative noise is suppressed.

Quantum and Material Effects in Undulator-Based LSW Searches for Dark Photons

2025-07-29T17:57:09Z

The dark photon is one of the simplest extensions of the Standard Model and provides a minimal laboratory for quantum-mechanical phenomena. Light-shining-through-a-wall (LSW) searches often adopt the dark photon-photon oscillation formula as if the sensitivity were independent of the light source, the wall, and the surrounding medium. In this paper, I revisit an LSW experiment whose light source is an undulator and systematically include various quantum effects: finite wave packets, kinematical suppression due to the microscopic structure of the source, and mixing suppression/enhancement in the wall and the air. We find that the resulting sensitivities deviate significantly from those obtained with the naïve oscillation formula, especially depending on the mass of the dark photon, relevant to reflective index of the medium or walls, there can be resonance effects enhancing the sensitivity significantly. Accounting for these effects, we show that placing a photon detector outside the shielding along the beamline of a synchrotron facility enables an economical, parasitic LSW search for dark photons.

100s TeV/m-Level Particle Accelerators Driven by High-density Electron Beams in Micro Structured Carbon Nanotube Forest Channel

2025-07-29T14:19:47Z

Solid-state materials, such as carbon nanotubes (CNTs), have the potential to support ultra-high accelerating fields in the TV/m range for charged particle acceleration. In this study, we explore the feasibility of using nanostructured CNTs forest to develop plasma-based accelerators at the 100 TeV/m-level, driven by high-density, ultra-relativistic electron beams, using fully three-dimensional particle-in-cell simulations. Two different acceleration mechanisms are proposed and investigated: the surface plasmon leakage field and the bubble wakefield. The leakage field, driven by a relatively low-density beam, can achieve an acceleration field up to TV/m, capable of accelerating both electron and positron beams. In particular, due to the direct acceleration by the driver beam, the positron acceleration is highly efficient with an average acceleration gradient of 2.3 TeV/m. In contrast, the bubble wakefield mechanism allows significantly higher acceleration fields, e.g. beyond 400 TV/m, with a much higher energy transfer efficiency of $66.7\%$. In principle, electrons can be accelerated to PeV energies over distances of several meters. If the beam density is sufficiently high, the CNT target will be completely blown out, where no accelerating field is generated. Its threshold has been estimated. Two major challenges in these schemes are recognised and investigated. Leveraging the ultra-high energy and charge pumping rate of the driver beam, the nanostructured CNTs also offer significant potential for a wide range of advanced applications. This work represents a promising avenue for the development of ultra-compact, high-energy particle accelerators. We also outline conceptual experiments using currently available facilities, demonstrating that this approach is experimentally accessible.

Detuning Properties of RF Phase Modulation in an Electron Storage Ring

2025-07-29T13:40:59Z

In electron storage rings, it is possible to increase the bunch length by applying phase modulation to the radio frequency accelerating field by choosing appropriate parameters for the modulation. Such a bunch lengthening effect improves beam parameters such as beam lifetime, which can help us achieve better beam stability. It is well known that the modulation frequency around the double synchrotron frequency is effective in lengthening the bunch. The dependence of bunch lengthening on modulation frequency, the so-called detuning property, has a peak around the double synchrotron frequency with a frequency width that depends on the modulation amplitude. Nonlinear effects due to phase modulation lead to a peak frequency shift in a negative direction from the double synchrotron frequency, accompanied by an asymmetric peak shape. Beam current also affects the properties of the detuning condition of such bunch lengthening. We investigated the detuning property using a theoretical model and systematic measurements at the electron storage ring KARA, and we verified the qualitative agreement between the experiments and the theoretical model. The macro-particle simulations have confirmed the agreement.

Electrostatic toroidal bender and its fringe fields

2025-07-28T22:18:48Z

I describe the COSY-Infinity code GES that we have developed and used in various forms in the past 30 years to calculate maps to third order through electrostatic bend elements. It has been a mystery that COSY's in-built procedures ES, ESP and ECL disagreed with our own code. This note is intended to clarify the issue.

Rapid-cycling ReBCO dipole magnet concept for muon acceleration

2025-07-28T14:47:45Z

We present a concept of the rapid-cycling 1.7 T ReBCO magnet for 1 to 10 kT/s ramping range as required for muon acceleration in a future muon collider presently under study. This approach is based on the 6 kA CORC-like cable constructed with 12 superconducting ReBCO tapes of 2 mm width. Based on theoretical prediction there is a linear scaling of the ReBCO cable hysteresis loss with the crossing magnetic field possibly generating power loss independent of the magnetic field ramping speed. This feature makes this ReBCO cable suitable for the construction of rapid-cycling magnets. In this work we outline the design of a dipole magnet for 1.7 T gap magnetic field and discuss the helium coolant parameters for the minimal electric power.

Numerical Studies for EuPRAXIA@SPARC\_LAB Plasma Beam Driven Working Point

2025-07-28T10:21:09Z

The realization of a plasma based user facility on the model of EuPRAXIA@SPARC\_LAB requires to design a working point for the operation that allows to get an high accelerating gradient preserving a low emittance and low energy spread of the accelerated beam. Such beam is supposed to pilot a soft x-ray free electron laser with a wavelength of 2-\SI{4}{\nano\meter}. In this work several simulation scans are presented, varying at the same time the plasma density and driver-witness separation in order to show that, in a realistic working point for EuPRAXIA@SPARC\_LAB, it is possible to find an ideal compromise for a witness with a peak current >1kA that allows to preserve the energy spread of the core (80\% of the charge) below 0.1\%, while maintaining an accelerating gradient inside the plasma module around of 1 GV/m. The study is completed with a parametric analysis with the aim of establishing the stability requirements of the RF working point and the plasma channel in order to preserve the energy jitter at the same level of the energy spread.

Twinac: A Universal Framework for Virtual Accelerator Controls

2025-07-28T03:03:19Z

We propose a universal framework for a system of virtual accelerator controls (Twinac), a standard toolkit for research institutions to design, maintain, and use a real-time, end-to-end "digital twin" of their particle accelerator facility. This virtual counterpart will mirror any physical accelerator to provide (1) predictive maintenance; (2) surveillance of hidden environmental factors, such as seasonal temperature variations, which could impact performance of power supplies, magnets, and other instruments; and (3) a capability to model novel ways to operate the accelerator without risking equipment damage. Twinac is envisioned as accelerator facility agnostic, allowing institutions to share and reuse myriad simulation approaches (analytics-based, A.I.-driven, or combinations of the like) across facilities. The Twinac system lays the groundwork for a collaborative network of institutions to maintain and update this shared virtual accelerator technology.

Enhanced energy gain through higher-order resonances during direct laser acceleration with superluminal phase velocity

2025-07-26T14:44:45Z

Ultra-high intensity laser-plasma interactions can produce ultra-relativistic electrons via direct laser acceleration, assisted by quasi-static plasma magnetic and electric fields. These fields transversely confine electron motion and induce betatron oscillations. The net energy gain is strongly influenced by the interplay between two frequencies: the betatron frequency and the frequency of laser field oscillations experienced by the electron. Prior work has shown that energy gain is enabled by a resonance between the betatron oscillations and the oscillations of the laser field. In particular, higher-order resonances occur when the laser field completes multiple cycles during one betatron oscillation, allowing additional regimes of energy transfer beyond the fundamental (betatron) resonance. In this work, we demonstrate that such resonances become particularly effective when the laser's phase velocity is superluminal. Although the two frequencies generally evolve differently with increasing electron energy, which leads to detuning, a superluminal phase velocity introduces a non-monotonic frequency ratio with a global minimum. This minimum allows sustained frequency matching over a broad energy range, thereby enabling enhanced energy gain. As the phase velocity increases, the betatron resonance becomes ineffective due to premature frequency detuning. At the same time, higher-order resonances become increasingly effective, emerging as the dominant mechanisms for enhanced energy gain in this regime of direct laser acceleration.

Optics design of the Super Tau-Charm Facility collider rings

2025-07-25T03:33:30Z

The Super Tau-Charm Facility (STCF), China's next-generation electron-positron collider, targets an unprecedented luminosity exceeding 5x10^34 cm^-2 s^-1 at a center-of-mass energy of 4 GeV. The implementation of a submillimeter vertical beta function at interaction point (< 1 mm) and crab-waist collision scheme in this low-energy regime introduces critical challenges through severe nonlinear effects that constrain dynamic aperture and degrade Touschek lifetime. To address these constraints, we propose a novel quasi-two-fold symmetric lattice design integrating several synergistic features: Linear optics optimization minimizing the H-invariant around the ring to maximize local momentum acceptance (LMA); Up to third-order of local chromaticity correction in the interaction region combined with second-order achromatic arc optics, enhancing off-momentum beam dynamics; Configured FODO arc structure with interleaved sextupole groups satisfying -I transformation, suppressing third-order geometric aberrations while optimizing Montague function distributions; Advanced final focus system integrating chromatic sextupoles, crab sextupoles, and strategically positioned octupoles to counteract final quadrupole fringe fields. Furthermore, we develop a multi-objective genetic algorithm using the in-house toolkit PAMKIT to simultaneously optimize 46 sextupole families, maximizing both dynamic aperture and momentum bandwidth. Optics performance is evaluated under error conditions with appropriate corrections, ensuring robust beam dynamics.

Commissioning of a radiofrequency quadrupole cooler-buncher for collinear laser spectroscopy

2025-07-24T14:23:01Z

A RadioFrequency Quadrupole (RFQ) cooler-buncher system has been developed and implemented in a collinear laser spectroscopy setup. This system is dedicated to convert a continuous ion beam into short bunches, while enhancing beam quality and reducing energy spread. The functionality of the RFQ cooler-buncher has been verified through offline tests with stable rubidium and indium beam, delivered from a surface ion source and a laser ablation ion source, respectively. With a transmission efficiency exceeding 60\%, bunched ion beams with a full width at half maximum of approximately 2~$μ$s in the time-of-flight spectrum have been successfully achieved. The implementation of the RFQ cooler-buncher system also significantly improves the overall transmission efficiency of the collinear laser spectroscopy setup.

Modelling Tritium Production and Release at High-Energy Proton Accelerators

2025-07-24T11:27:13Z

Tritium is a well-known byproduct of particle accelerator operations. To keep levels of tritium below regulatory limits, tritium production is actively monitored and managed at Fermilab. We plan to study tritium production in the targets, beamline components, and shielding elements of the Fermilab facilities such as NuMI, BNB, and MI-65. To facilitate the analysis, we construct a simple model and use three Monte Carlo radiation codes, FLUKA, MARS, and PHITS, to estimate the amount of tritium produced in these facilities. The analysis could also serve as an intercomparison between these code results related to tritium production. To assess the actual amounts of tritium that would be released from various materials, we employ a semi-empirical diffusion model. The results of this analysis are compared to experimental data whenever possible. This approach also helps to optimize proposed target materials with respect to the tritium production and release.

Advanced Ceramic Plasma Discharge Capillaries for high repetition rate operation

2025-07-24T09:19:16Z

In view of future applications of plasma-based particle accelerators, within the fields of high-energy physics and new light sources, the capability of plasma sources to operate at high repetition rates is crucial. In particular for gas-filled plasma discharge capillaries, which allow direct control over plasma properties, a key aspect is the longevity of the material, subject to erosion due to the heat flux delivered by high voltage plasma discharges. In this regard, we present an innovative design of discharge capillaries based on the use of different ceramic materials, which can sustain high voltage plasma discharges at high repetition rate and, moreover, be easily machined for the complex geometries required for plasma-based accelerators. Experimental campaigns are carried out at 10-150 Hz, assessing the longevity of ceramic capillaries by means of different diagnostic techniques. In addition, numerical simulations are performed to analyze the heat transfer within the whole plasma source. Results from experimental and numerical analysis highlight the capability of ceramic capillaries to preserve plasma properties and the integrity of the source during long-term plasma discharge operation at high repetition rate. In particular, we demonstrated the suitability of the proposed solution for the operative range of 100-400 Hz, foreseen for EuPRAXIA@SPARC_LAB project.

A Supervised Machine Learning Framework for Multipactor Breakdown Prediction in High-Power Radio Frequency Devices and Accelerator Components: A Case Study in Planar Geometry

2025-07-23T19:14:46Z

Multipactor is a nonlinear electron avalanche phenomenon that can severely impair the performance of high-power radio frequency (RF) devices and accelerator systems. Accurate prediction of multipactor susceptibility across different materials and operational regimes remains a critical yet computationally intensive challenge in accelerator component design and RF engineering. This study presents the first application of supervised machine learning (ML) for predicting multipactor susceptibility in two-surface planar geometries. A simulation-derived dataset spanning six distinct secondary electron yield (SEY) material profiles is used to train regression models - including Random Forest (RF), Extra Trees (ET), Extreme Gradient Boosting (XGBoost), and funnel-structured Multilayer Perceptrons (MLPs) - to predict the time-averaged electron growth rate, $δ_{avg}$. Performance is evaluated using Intersection over Union (IoU), Structural Similarity Index (SSIM), and Pearson correlation coefficient. Tree-based models consistently outperform MLPs in generalizing across disjoint material domains. MLPs trained using a scalarized objective function that combines IoU and SSIM during Bayesian hyperparameter optimization with 5-fold cross-validation outperform those trained with single-objective loss functions. Principal Component Analysis reveals that performance degradation for certain materials stems from disjoint feature-space distributions, underscoring the need for broader dataset coverage. This study demonstrates both the promise and limitations of ML-based multipactor prediction and lays the groundwork for accelerated, data-driven modeling in advanced RF and accelerator system design.