Towards Agentic AI on Particle Accelerators

2025-09-02T19:53:40Z

As particle accelerators grow in complexity, traditional control methods face increasing challenges in achieving optimal performance. This paper envisions a paradigm shift: a decentralized multi-agent framework for accelerator control, powered by Large Language Models (LLMs) and distributed among autonomous agents. We present a proposition of a self-improving decentralized system where intelligent agents handle high-level tasks and communication and each agent is specialized to control individual accelerator components. This approach raises some questions: What are the future applications of AI in particle accelerators? How can we implement an autonomous complex system such as a particle accelerator where agents gradually improve through experience and human feedback? What are the implications of integrating a human-in-the-loop component for labeling operational data and providing expert guidance? We show three examples, where we demonstrate the viability of such architecture.

Generic Rolling Access to Synchrotron Radiation Facilities

2025-09-02T12:16:30Z

A generic model for rolling access to synchrotron radiation experiments is presented, which has the capacity to replace call-based access models. Proposal submission, evaluation and scheduling are all executed in a rolling fashion. This significantly reduces the waiting times between proposal submission and experiment execution than that of the call-based access model. The generic rolling access model is in principle applicable to any beamlines, regardless of the number of experimental methods or setups it provides to users. This access model is flexible and could provide faster access compared to call-based access model as well as accommodate experiments and projects requiring extended preparation times.

Application Of Large Language Models For The Extraction Of Information From Particle Accelerator Technical Documentation

2025-09-02T11:45:01Z

The large set of technical documentation of legacy accelerator systems, coupled with the retirement of experienced personnel, underscores the urgent need for efficient methods to preserve and transfer specialized knowledge. This paper explores the application of large language models (LLMs), to automate and enhance the extraction of information from particle accelerator technical documents. By exploiting LLMs, we aim to address the challenges of knowledge retention, enabling the retrieval of domain expertise embedded in legacy documentation. We present initial results of adapting LLMs to this specialized domain. Our evaluation demonstrates the effectiveness of LLMs in extracting, summarizing, and organizing knowledge, significantly reducing the risk of losing valuable insights as personnel retire. Furthermore, we discuss the limitations of current LLMs, such as interpretability and handling of rare domain-specific terms, and propose strategies for improvement. This work highlights the potential of LLMs to play a pivotal role in preserving institutional knowledge and ensuring continuity in highly specialized fields.

IsoDAR@Yemilab: Preliminary Design Report -- Volume I: Cyclotron Driver

2025-09-02T08:38:27Z

This Preliminary Design Report (PDR) describes the IsoDAR electron-antineutrino source in two volumes which are mostly site-independent and describe the cyclotron driver providing a 60 MeV, 10 mA proton beam (this Volume); and the medium energy beam transport line (MEBT) and target (Volume II). The IsoDAR driver and target will produce about 1.15e23 electron-antineutrinos over five years. Paired with a kton-scale liquid scintillator detector, it will enable a broad particle physics program including searches for new symmetries, new interactions and new particles. Here in Volume I, we describe the driver, which includes the ion source, low energy beam transport, and cyclotron. The latter features Radio-Frequency Quadrupole (RFQ) direct axial injection and represents the first accelerator purpose-built to make use of so-called vortex motion.

Demonstration of a tandem lens for producing shaped laser-ionized plasmas for plasma wakefield acceleration

2025-09-01T20:07:27Z

We demonstrate a tandem lens optical setup, comprising two diffractive optics, that focuses a high-power ultrafast laser with a shaped on-axis intensity profile, producing a meter-long Bessel focus. The intended use of the optical setup is to produce a laser-ionized plasma source for plasma wakefield acceleration. By controlling the on-axis intensity, the density profile of the plasma ramps at the entrance and exit of the plasma can be tailored to optimize matching of the electron beam into the plasma. In addition to demonstrating the optical system, we describe the algorithm used to calculate the lens phases and present detailed calculations of the lenses' expected performance.

Terahertz control of relativistic electron beams for femtosecond bunching and laser-synchronized temporal locking

2025-08-28T11:44:14Z

Femtosecond relativistic electron bunches and micro-bunch trains synchronised with femtosecond precision to external laser sources are widely sought for next-generation accelerator and photonic technologies, from extreme UV and X-ray light sources for materials science, to ultrafast electron diffraction and future high-energy physics colliders. While few-femtosecond bunches have been demonstrated, achieving the control, stability and femtosecond-level laser synchronisation remains critically out of reach. Here we demonstrate a concept for laser-driven compression of high-energy (35.5 MeV) electron bunches with temporal synchronisation to a high-power (few-TW) laser system. Laser-generated multi-cycle terahertz (THz) pulses drive periodic electron energy modulation, enabling subsequent magnetic compression capable of generating tuneable picosecond-spaced bunch trains with 30 pC total charge and 50 A peak currents, or to compress a single bunch by a factor of 27 down to 15 fs duration. The THz-driven compression simultaneously drives temporal-locking of the bunch to the THz drive laser, providing a route to femtosecond-level synchronisation, overcoming the timing jitter inherent to radio-frequency accelerators and high-power laser systems. This THz technique offers compact and flexible bunch control with unprecedented temporal synchronisation, opening a pathway to unlock new capabilities for free electron lasers, ultrafast electron diffraction and novel plasma accelerators.

Start-to-end modelling of laser-plasma acceleration, beam transport and dose deposition of very high-energy electrons for radiotherapy

2025-08-28T11:39:39Z

Radiotherapy using very high-energy electron (VHEE) beams generated by a laser-plasma accelerator has garnered significant interest due to its dose distribution capabilities and potential to address limitations of traditional photon-based radiotherapy. To explore the feasibility of such approach, the presented study uses the parameters of OONA, the commercial <1.3\,J, <25\,fs pulse duration laser recently installed at the Weizmann Institute of Science. Through particle-in-cell simulations of laser-plasma interaction, realistic electron beams were obtained. After filtering and collimation with a beamline and arranging them into an array of pencil beams, their radiotherapeutic potential was investigated. GEANT4 simulations were used to calculate the dose deposition in water phantoms and heterogeneous phantoms with bone inserts, considering realistic beam parameters for laser-plasma accelerators. Multifield irradiation setup and the dose distribution at the isocenter through different incidence angles were studied, simulating an intensity-modulated delivery. Our findings demonstrate that polychromatic VHEE beams generated from laser-plasma accelerators, when collimated using a compact beamline of quadrupoles and dipoles, can deliver an on-axis dose with enhanced precision and uniformity. This study highlights the transformative potential of laser-plasma accelerators in advancing radiotherapy modalities, paving the way for further research and clinical implementation.

Multiphysics Analysis of Cryogenically Cooled Photocathode in a CW SRF Injector cavity

2025-08-27T16:36:21Z

The paper evaluates the thermal regime of a cryogenically cooled copper photocathode integrated into a continuous-wave superconducting radio-frequency injector cavity with direct thermal contact. Such a photoinjector layout is being developed at DESY and has recently demonstrated a record-high 50 MV/m axial electric field in radio-frequency tests, marking an important milestone. To address the thermal effect of the picosecond excitation laser, we first develop a two-temperature model to describe the temperature of the emitting surface at cryogenic temperatures and solve it numerically. Subsequently, we present a one-temperature model of the bulk photocathode coupled with an electromagnetic model of the injector cavity. For the current injector design, we predict a negligible impact of the laser on the intrinsic quality factor of the cavity, identifying instead the cryogenic stability of the copper cathode as the primary operational limit. To overcome cooling challenges, we propose an improved configuration of the cathode plug. For the proposed geometry, the multiphysics analysis confirms stable performance at a nominal 2 W laser power, sufficient for 100 pC beams at 1 MHz under optimistic quantum efficiency assumptions. Operation at higher laser loads will benefit from further dedicated cryogenic analysis.

The 2025 Roadmaps for the US Magnet Development Program

2025-08-26T17:36:52Z

The US Physics community completed the Snowmass planning process in 2022, culminating in the HEPAP Particle Physics Project Prioritization Panel (P5) publishing its summary report at the end of 2023. Building on this, the US Magnet Development Program, a national accelerator magnet R&D program established by DOE-OHEP in 2016, has updated its strategic plan to align with the 2023 P5 report, resulting in this roadmap document.

Solar cosmic ray generation, Newtonian gravity, missing mass, dark energy, laboratory-based nuclear astrophysics, and all that

2025-08-25T17:52:16Z

Begun as part of a promotion of accelerator-based nuclear astrophysics, research toward this goal has shifted to cosmic ray production within the solar system. This has been motivated by the high quality of data collected recently by programs such as the International Space Station (ISS), by the fundamental importance of the topic, and by the unsatisfactory state of our understanding of the actual source of cosmic rays. A ``minor'' change in the Newtonian gravitational formulation converts solar production of high energy cosmic rays from ``impossible'' to ``likely'', without much disrupting the vast existent domain of well understood astronomical gravitational processes. This change enables the sun to ``capture'' protons of energy so high that they would, otherwise, escape the solar system. This change in Newton's gravitational formula would disrupt current cosmological understanding of missing mass and dark energy. With this changed understanding of gravity, it has been quite easy to produce a semi-quantitative understanding of the solar origin of cosmic rays up to energies at least as great as $10^6$\,GeV/nucleon that have by now been detected and measured so persuasively. A ``Double Slingshot'' mechanism is proposed according to which at least a substantial fraction of all cosmic rays could have begun their life within the solar system. Accelerator-based nuclear astrophysics is promoted, beginning with the functioning of an ``{\rm E}\&{\rm M}'' storage ring for laboratory-based study of processes such as ${\rm 6LI} + {\rm 7Li} \rightarrow {\rm 13C} + γ$. Especially to be emphasized are experiments made possible by ''rear-end collisions'' between nuclear isotopes of two different types traveling simultaneously at different velocities in the same direction in the same storage ring. This amounts to ``studying nuclear physics in a moving frame of reference''.

Terahertz-Driven Nano-tip Field-Emission Electron Gun and Cascaded Acceleration

2025-08-23T16:36:04Z

This paper reports two versions of terahertz (THz)-driven nanotip field-emission electron guns: single-layer reflective guns (SLRGs) and double-layer reflective guns (DLRGs). Both guns use nanotip emitters and accelerate electrons through the electric field of the THz wave. SLRGs employ a reflective structure to superimpose the initial and subsequent half-cycles of the THz electric field, enhancing the field amplitude and acceleration efficiency. Experiments have demonstrated that SLRGs achieve higher acceleration efficiency than single-layer nonreflective guns (SLNRGs) for identical THz input energies. This constitutes direct experimental verification of the efficacy of the reflective structure. Theoretically, SLRGs operating in single-feed mode can match the acceleration efficiency of dual-feed SLNRGs while reducing operational complexity. DLRGs demonstrate THz-driven cascaded electron acceleration through precise scanning of the delay between two incident THz beams. This represents a direct experimental demonstration of cascaded acceleration in THz-driven electron sources. The experimental results of DLRGs align closely with the results of electron dynamics predicted by simulations. This establishes the foundation for developing multilayer high-acceleration-efficiency THz-driven high-energy electron guns. The ability to manipulate the THz for each layer individually holds promising potential for improving the beam quality of THz electron guns.

Precision alignment and tolerance of a plasma wakefield accelerator in a laser-ionized plasma source

2025-08-23T01:21:54Z

We present a novel method for aligning a laser ionized plasma source to a pair of ultra-relativistic electron beams that comprise a plasma wakefield accelerator (PWFA). We achieve alignment by analyzing the plasma afterglow light observed at two longitudinal locations as the plasma column is scanned across the electron beam. By analyzing the relative plasma light intensity at the two locations, we aligned an 85-cm plasma source to a 10 GeV, 1.6 nC electron beam to within 10 um offset, 10 urad tilt. The alignment is verified by analyzing the drive beam energy loss, energy transfer efficiency, and the witness beam energy gain as a function of the misalignment between the beams and the plasma. From this measurement, we extract the alignment tolerance required between the laser-ionized plasma source and electron beams, an important metric necessary for collider design studies or light source applications based on a laser-ionized plasma source.

A rigorous study on the longitudinal beam coupling impedance of a cylindrical lossy pipe in normal and anomalous regimes

2025-08-22T09:29:51Z

One of the primary issues in designing particle accelerators is the effect of energy losses and collective instabilities caused by the conductivity of the vacuum chamber. Due to its relevance, many authors have long focused on studying the coupling impedance of lossy pipes with various geometries and metals. Most studies were developed for relativistic beams and room-temperature conductivity. In recent years, there has been increasing interest in the high-frequency impedance behavior of ultra-short bunches, as in the case of FELs, and in the anomalous conductivity at cryogenic temperatures of the vacuum chambers. This work introduces a new unifying theoretical framework for analyzing electromagnetic interactions in cylindrical pipes excited by charged particles traveling on the axis. In this context, a key achievement is the derivation of a rigorous expression for the electric conductivity, based on the Boltzmann theory of a Fermi gas, which forms the foundation for subsequent developments. New formulas for the surface impedance of cylindrical pipes are presented, from which a more general impedance expression is derived. Our approach captures the system's behavior across various energy and frequency regimes. Eventually, the anomalous regime is studied rigorously, providing analytical solutions for the electromagnetic field at cryogenic temperatures. Indeed, new and exact expressions for the anomalous surface impedance for carriers' reflection coefficients p = 0 and p = 1 are obtained, offering deeper insight into the electromagnetic properties of such systems under extreme conditions.

Moderator Simulation for the Compact Positron Source at NLCTA

2025-08-21T21:35:50Z

Positron moderation is a key part of the production of slow positrons. This paper examines G4beamline simulations of various moderator designs and the addition of a radiofrequency cavity to increase the efficiency of the moderator. A setup consisting of a 100 MeV electron beam incident on a 7 mm tungsten target, a 5 T adiabatic matching device, a 5-cell L-band RF cavity, and a single-crystal tungsten moderator leads to a 39.3x improvement in the number of positrons moderated over a common thin-foil polycrystalline moderator without the AMD and cavity. We also present a novel calculation method for determining the stopping distribution of low-energy positrons in a thin foil, modifying the Makhovian distribution with an exponential ramp to account for edge effects.

Laser-driven bunch compression for ultrashort free-electron laser pulses

2025-08-20T10:16:27Z

Generation of ultrashort X-ray pulses in a free-electron laser relies on high-density electron bunches with a precisely adjusted current and energy distribution. To this end, robust and flexible electron bunch manipulation techniques are required that allow a high degree of control over the phase space density of the bunch. This paper reports on the demonstration of ultrashort current spikes with femtosecond duration, created by compressing an electron bunch after a laser-induced energy modulation with linearly varying envelope. This scheme is implemented at the free-electron laser FLASH, where the energy modulation is created early in the linear accelerator before the bunch is accelerated to its final energy. Formation of the spikes is observed in measurements of the longitudinal phase space density. It is demonstrated that, in conjunction with conventional compression techniques, this laser-based scheme allows to create two spikes with variable temporal separation. Therefore, the demonstrated compression scheme shows great potential of enabling flexible ultrashort single- and double-pulse operation modes of free-electron lasers.