https://arxiv.org/api/WgUpK78AYVPugixFfBpegCxQgCs 2026-03-22T14:38:11Z 8715 45 15 http://arxiv.org/abs/2602.20564v1 2026-02-24T05:29:29Z

Levitated dipole reactors offer an attractive path towards economic fusion power generation. The intrinsic decoupling of the confining magnetic field-generating REBCO magnets and the vacuum vessel offer unparalleled accessibility and maintainability, allowing for high plant duty factors and theoretically low electricity prices. In order to achieve rapid deployment of fusion power to the grid, the use of the Deuterium-Tritium (DT) fuel cycle is required due to its lower required plasma triple products. Historically, designs of levitated dipole fusion power plants have targeted advanced fuels as a DT device was seen to be infeasible due to the high fluxes of 14.1 MeV neutrons on the superconducting core magnet. This study presents high level designs for two feasible first-of-a-kind (FOAK) DT levitated dipole fusion power plants, the larger of which produces 667 MW of fusion power and is predicted to produce 208 MW of net electric power. Both designs consist of a heavily neutron-shielded, high-field REBCO core magnet capable of producing peak magnetic field strengths of 23 T while keeping peak mechanical strains below 0.4%. The neutron shielding is comprised of a layered structure of tungsten and boron carbide, which allows for 92% of the heat deposited in the neutron shield to be radiated out to the first wall while still providing sufficient neutron attenuation to give adequate REBCO conductor lifetimes. The core magnet REBCO coil is comprised of a small "sacrificial" section and a larger semi-permanent section. The sacrificial section, comprising ~20% of the coil, will have a neutron damage limited lifetime of ~1 year, after which the core magnet will be quickly removed from the vacuum vessel and replaced. This allows the damaged core magnet to be refurbished and reused, reducing cost and allowing for economic fusion power generation from a DT levitated dipole reactor.

2026-02-24T05:29:29Z 31 pages, 23 figures, Submitted to Fusion Engineering and Design T. Simpson R. A. Badcock T. Berry C. S. Chisholm P. J. Fimognari P. Fisher D. T. Garnier K. Lenagh-Glue B. Leuw R. Mataira L. Meadows T. McIntosh J. Poata K. Richardson B. Smith A. Simpson J. D. Tyler T. Wordsworth http://arxiv.org/abs/2602.20428v1 2026-02-24T00:01:02Z

The Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab is investigating a significant energy upgrade utilizing Fixed-Field Alternating-gradient (FFA) recirculating arcs. This upgrade requires the design of complex horizontal beam splitters to manage up to six concurrent beam passes. This paper presents the conceptual design of these splitters, which are subject to severe physical constraints imposed by the existing accelerator tunnel and multifaceted beam dynamics requirements for matching into the permanent-magnet FFA arcs. The design methodology, centered on multi-pass simulations in the Bmad toolkit, is detailed from the initial geometric layout through the advanced optics matching. Key results include a robust geometric arrangement that fits within the spatial boundaries and the development of multiple, flexible optics matching solutions. Furthermore, the design integrates a viable scheme for extracting high-energy beams for the experimental halls, a critical operational requirement. This work establishes a comprehensive and viable conceptual design, forming a baseline for future engineering and performance optimization studies.

2026-02-24T00:01:02Z To be submitted to Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 59 Pages (including 3 appendices) 14 figures Ryan Bodenstein Jay Benesch Alexander Coxe Kirsten Deitrick Brian Freeman Randika Gamage Reza Kazimi Donish Khan Katheryne Price Ben Schaumloffel http://arxiv.org/abs/2602.20411v1 2026-02-23T23:17:52Z

The SPARTA project aims to design a medium-sized accelerator facility that facilitates new experiments in strong-field quantum electrodynamics using plasma-based accelerators. For this, we need several plasma stages and, therefore, several drivers. Drivers can be either an ultra-relativistic charged particle beam or a high-intensity laser beam. In case we use particle beams, we need a method of distributing these beams from a radio-frequency accelerator to the different plasma stages. A central part of this is a delay scheme that ensures temporal synchronization of the drivers. In this paper, we demonstrate how to achieve a 2 ns delay in $\sim$12 m, while keeping the first-order beam parameters periodic.

2026-02-23T23:17:52Z 10 pages, 7 figures. This paper is being submitted to the European Advanced Accelerator Conference proceedings D. Kalvik E. Adli P. Drobniak F. Peña C. A. Lindstrøm http://arxiv.org/abs/2602.20233v1 2026-02-23T18:55:33Z

We present an on-line tuning strategy for the ISAC post-accelerator that pre-sets machine optics with a digital twin and then performs Bayesian optimization for steering under online operation with beam. The model computes end-to-end tunes in seconds and interfaces with the control system under device bounds, slew-rate limits, and loss interlocks. We report three experimental case studies demonstrating that decoupling optics from steering yields faster and more reliable convergence than a fully Bayesian optics-plus-steering baseline under identical conditions. Across these cases, iterations to high transmission tunes are reduced by a factor of 4-6, with final average transmissions in the mid- to high-90% range. By factorizing optics from steering, the dimensionality of the parameter space is reduced, convergence becomes more predictable, and operational safeguards are easier to enforce.

2026-02-23T18:55:33Z 12 pages, 9 figures O. Hassan O. Shelbaya P. M. Jung O. Kester T. Planche W. Fedorko http://arxiv.org/abs/2602.19830v1 2026-02-23T13:29:03Z

This course introduces key aspects of superconducting magnet technology in accelerators: basic principles, superconducting materials (NbTi, Nb$_3$Sn, ReBCO), wire and cable architectures, and fabrication methods. Compared to copper or permanent magnets, superconducting systems require cryogenics and complex protection schemes but enable superior performance. Core challenges - like flux pinning, magnetization effects, quench behavior, mechanical forces interception, power tests and magnetic measurements - are addressed through examples of magnets from PSI and CERN.

2026-02-23T13:29:03Z 35 pages, contribution to the CAS - CERN Accelerator School: Mechanical & Materials Engineering for Particle Accelerators and Detectors, 2-15 June 2024, Sint-Michielsgestel, Netherlands Stephane Sanfilippo http://arxiv.org/abs/2602.19808v1 2026-02-23T13:07:52Z

This course introduces conventional magnets used in particle accelerators, focusing on both normal-conducting copper coil magnets and permanent magnets (PMs). It covers magnet classification, design principles, material selection, and mechanical constraints. Advantages and limitations of PMs compared to copper coil magnets are discussed. Key construction steps and cooling methods are presented. The course also includes magnetic field measurement techniques and quality control. Practical examples from PSI and CERN illustrate the concepts.

2026-02-23T13:07:52Z 28 pages, contribution to the CAS - CERN Accelerator School: Mechanical & Materials Engineering for Particle Accelerators and Detectors, 2-15 June 2024, Sint-Michielsgestel, Netherlands Stephane Sanfilippo http://arxiv.org/abs/2602.19712v1 2026-02-23T11:02:13Z

Cancer therapy for deep-seated tumors requires precise irradiation of a small target deep within the patient while minimizing radiation exposure to surrounding tissues. This can be accomplished with a round beam sharply converging towards a single spot, requiring a large beam size in both planes at the exit of the focusing system. Achieving this over a short distance using only quadrupole lenses is challenging; but by using a linear active plasma lens (APL) in defocusing mode, the beam can be quickly and non-destructively enlarged before focusing using quadrupoles. The position of the irradiation spot can also be scanned in three dimensions by changing magnet settings. The SHARP project will develop and test this concept. Such a system can be used with very high energy electrons (hundreds of MeV), creating a Bragg-peak-like spot using novel accelerator technology. This could lead to more compact radiotherapy facilities, not requiring a bulky infrastructure typically associated with proton radiotherapy machines. If successful, SHARP will enable precision conformal radiotherapy, spatial fractionation, and potentially be useful for FLASH radiotherapy.

2026-02-23T11:02:13Z 18 pages, 9 figures. Submitted to the proceedings of the European Advanced Accelerator Conference (EAAC) 2025 Kyrre Ness Sjobak Elisabeth Rød-Lindberg Abélia Ellingsen Pierre Drobniak Vilde Flognfeldt Rieker Fardous Reaz Carl Andreas Lindstrøm Erik Adli http://arxiv.org/abs/2601.00586v3 2026-02-23T06:30:26Z

We present a detailed account of the kinetic approach for describing the effect of synchrotron radiation on electron and positron spin polarization in storage rings. This approach was introduced in 1974 by Derbenev and Kondratenko and was extended by us since 2001. The kinetic approach is much less frequently utilized but it is more general than the original non-kinetic approach of Derbenev and Kondratenko from 1972 since the kinetic approach is not centered on the invariant spin field. As with the non-kinetic approach the kinetic approach covers the radiative depolarization effect, the Sokolov-Ternov effect and its Baier-Katkov correction as well as the kinetic polarization effect but it enables the calculation of corrections to the original Derbenev-Kondratenko formulas and thereby provides estimates of the reliability of the latter. The kinetic approach is applicable to storage rings with energies from a few GeV up to the energies of the FCC-ee and CEPC and beyond. The kinetic approach is based on the spin-orbit Wigner functions which lead to the so-called Bloch equation for the polarization density which is a generalization of Fokker-Planck equations to spin motion. In turn, as discovered in 2019, the Bloch equation is based on stochastic ordinary differential equations which can be used to develop Monte-Carlo spin tracking codes covering the key effects beyond the radiative depolarization effect. These stochastic ordinary differential equations lead to a new viewpoint of the physical effects, in particular the kinetic polarization effect.

2026-01-02T06:14:44Z Klaus Heinemann Dan T. Abell Jose Agudelo Desmond P. Barber Oleksii Beznosov Joseph P. Devlin James A. Ellison Eiad Hamwi Boaz Nash Mathias Vogt http://arxiv.org/abs/2602.14870v2 2026-02-23T03:50:15Z

In order to achieve its ambitious luminosity target, the SuperKEKB collider must achieve and sustain high beam currents on the order of Ampere in its storage rings. This requires continuous top-up injection and operation with a two-bunch injection scheme, injecting two 96 ns spaced bunches in a single injection cycle. An important input for tuning the injection beam is the position reading from a dedicated beam position monitor (BPM), located after the septum magnets, slightly upstream of where the injected and stored beams converge. Previously, the readout electronics used for these special BPMs were not capable of independent measurement of both bunches in the two-bunch injection mode and modification of the concerned devices and their firmware was not feasible. The opportunity was taken to develop a new readout device based on the AMD/Xilinx RF System on a Chip (RFSoC) platform with the goal of not only providing a sufficiently flexible and performant readout solution for the concerned BPMs, but also to evaluate and gain experience with the platform for beam monitor electronics applications. This paper is concerned with the details of this development as well as evaluation and operation of the developed device.

2026-02-16T16:02:20Z 17 pages, 11 figures, prepared for submission to JINST; spell out acronyms (GSPS, FPGA, PLL), add arxiv number on title page B. Urbschat G. Mitsuka L. Ruckman http://arxiv.org/abs/2602.19081v1 2026-02-22T07:37:47Z

High-quality and prebunched electron beams can produce coherent x-rays with high intensity and narrow bandwidth, which is essential for modern light sources. An all-optical scheme based on plasma-based acceleration to produce bright electron beams that are pre-bunched on nanometer-scales is proposed. By using a density modulation created by two low intensity counter-propagating lasers, the phase velocity of the plasma wake excited by an intense driver laser in a uniform plasma can be modulated at a frequency twice that of the colliding lasers and thus turn the injection on and off. The injected electrons are micro-bunched at the Doppler shifted wavelength of the modulated wavelength using the corresponding phase velocity of the gradual expansion of the wakefield. It is demonstrated that by controlling the properties of the drive and colliding lasers, that beams with exotic pre-bunched structures can be produced, which may have critical applications in ultrafast high power x-rays. This extremely compact, all-optical scheme to produce ultra-bright pre-bunched electron beams may therefore enable novel applications for ultrafast x-ray users and arouse general interest in various fields.

2026-02-22T07:37:47Z 10 pages, 4 figures Zhenan Wang Zewei Xu Qianyi Ma Yuhui Xia Letian Liu Chenxu Wang Thamine Dalichaouch Xueqing Yan Xinlu Xu Warren B. Mori http://arxiv.org/abs/2510.05507v3 2026-02-19T21:31:15Z

Long lived fission products represent a major challenge in nuclear waste management due to persistent radiotoxicity over very long timescales. This study focuses on six of these fission products: Se-79, Zr-93, Tc-99, Sn-126, I-127, Cs-135. This study investigates the feasibility of spallation driven transmutation, in which a high energy proton beam strikes a heavy spallation target to generate neutrons that induce transmutation in the fission products surrounding the target. Lead and depleted uranium are identified as the principal spallation target candidates, reflecting contrasting trade offs in neutron yield, secondary reactions, and heat generation. Simulations assess nuclide specific behavior under reactor scale inventories and practical geometric constraints. Results demonstrate that technetium, iodine, and selenium are strong candidates for transmutation using this pathway, while tin shows partial resistance but benefits from thermal flux. By contrast, zirconium is neutron transparent and inefficient to transmute, and cesium suffers from low net reduction due to competition with lighter isotopes. Cost effectiveness is highly isotope dependent: technetium is most favorable, whereas cesium and zirconium remain expensive. These findings highlight the advantages and limitations of spallation driven systems and motivate strategies with optimized target-blanket designs.

2025-10-07T01:51:34Z 12 pages, 6 tables, 4 figures. Submitted to Scientific Reports. Original submission replaced to add an author Grigor Tukharyan William Reed Kendrick Areg Danagoulian Benoit Forget 10.1038/s41598-026-38736-9 10.1038/s41598-026-38736-9 10.1038/s41598-026-38736-9 10.1038/s41598-026-38736-9 10.1038/s41598-026-38736-9 http://arxiv.org/abs/1201.1154v2 2026-02-19T17:07:41Z

RF cavities loaded with magnetic alloy (MA) or ferrite ring cores are used in synchrotrons and storage rings if the maximum RF frequency is in the order of a few MHz. A simple model for the description of cavities of this type is derived. The most important parameters are defined, and some properties of the material and of the cavity are summarized. Different cavity configurations, development aspects, and several practical topics are covered. A few specific ferrite- and MA-loaded cavity systems are discussed as examples.

2012-01-05T12:50:29Z 20 pages, contribution to the CAS - CERN Accelerator School: RF for Accelerators, 18 June - 01 July 2023, Berlin Germany Harald Klingbeil Technische Universität Darmstadt and GSI Helmholtzzentrum für Schwerionenforschung GmbH http://arxiv.org/abs/2602.17536v1 2026-02-19T16:49:36Z

This position paper presents a vision for self-driving particle accelerators that operate autonomously with minimal human intervention. We propose that future facilities be designed through artificial intelligence (AI) co-design, where AI jointly optimizes the accelerator lattice, diagnostics, and science application from inception to maximize performance while enabling autonomous operation. Rather than retrofitting AI onto human-centric systems, we envision facilities designed from the ground up as AI-native platforms. We outline nine critical research thrusts spanning agentic control architectures, knowledge integration, adaptive learning, digital twins, health monitoring, safety frameworks, modular hardware design, multimodal data fusion, and cross-domain collaboration. This roadmap aims to guide the accelerator community toward a future where AI-driven design and operation deliver unprecedented science output and reliability.

2026-02-19T16:49:36Z 14 pages, 1 figure Chris Tennant http://arxiv.org/abs/2602.17468v1 2026-02-19T15:34:28Z

Plasma-based accelerators offer high accelerating gradients and scalability through staging or long plasma sources, which makes them good candidates for future accelerator and collider concepts. Proton-driven accelerators in particular have the potential to bring particles to high energy in a single stage. In the quasilinear regime - where the plasma wake is only partially evacuated - a witness bunch of electrons drives a cavitated wake, which acts to preserve the emittance of the portion of the witness inside this self-blowout. In the case of a misalignment between the driver and witness, this behaviour can persist, but its effectiveness is reduced. In this paper, we study transverse witness dynamics in this regime, and develop analytical models to describe the witness motion, and develop a metric to estimate emittance preservation based on a single parameter which estimates the density of the witness after phase mixing. Particle in cell simulations using the AWAKE Run 2c baseline parameters show excellent agreement with the predictive models developed. This work allows alignment constraints to be set both for the AWAKE experiment and other wakefield acceleration schemes operating in the quasilinear regime.

2026-02-19T15:34:28Z 7 pages, 5 figures T. C. Wilson J. Farmer K. Lotov A. Pukhov http://arxiv.org/abs/2602.17173v1 2026-02-19T08:39:35Z

This note is intended to provide an overview of the implications of regulations and standards on the safety of mechanical equipment, with a focus on accelerator components. Each research facility has different internal rules and standards which are applicable to specific cases; however, the main reference legal frame in Europe is everywhere based on the applicable European Directives. After a brief introduction to the 'safety' for mechanical systems, the process of 'risk analysis' will be introduced. The majority of this note will then deal with regulations and standards for pressure and cryogenic equipment. The European Pressure Equipment Directive (PED) will be briefly described, together with the concept of 'harmonized standards' and their implications on the entire lifecycle of a pressure equipment, with some hints at the peculiarities of accelerator components. In the second part of this note, regulations and standards for machinery, load-lifting accessories and buildings will be briefly mentioned to complete the picture of the most common cases in an accelerator facility.

2026-02-19T08:39:35Z 17 pages, contribution to the CAS - CERN Accelerator School: Mechanical & Materials Engineering for Particle Accelerators and Detectors, 2-15 June 2024, Sint-Michielsgestel, Netherlands Luca Dassa