An Innovative Photon-Driven Subcritical Reactor Concept Powered by Synchrotron Radiation Source

2025-09-10T06:53:36Z

This paper introduces the conceptual design of a Photon Driven Reactor (PDR), an innovative subcritical reactor designed for energy generation driven by a synchrotron radiation. The PDR concept overcomes key technological challenges of conventional accelerator-driven systems, particularly the target's structural durability and its thermal management, by employing synchrotron photons directly interacting with fissile material to induce photonuclear reactions. Computational analyses involved criticality and fixed-source simulation using MCNPx and SERPENT Monte Carlo codes, providing robust evaluation of the neutron production, moderation, and multiplication mechanisms. The main focus of this study was to evaluate the system's capability to achieve a positive net energy gain, specifically assessing the thermal power output agains the electrical power absorbed from the grid. Furthermore, the adoption of spent nuclear fuel for the subcritical reactor core loading has been investigated, highlighting the sustainability and environmental benefits of the proposed PDR design. The proposed system is able to exploit a modularity feature. For each large synchrotron, up to fifty beam lines may be operated simultaneously, each delivering photons to an independent subcritical reactor core. With a photon flux on the order of $8.8 \times 10^{17}$ photons per second in each beamline, the results indicate that each individual reactor can achieve a thermal output up to 8 MW, while requiring about 435-660 kW of electrical input from the grid, thereby demonstrating the feasibility of energy amplification in the PDR.

Development of a national thrust test facility for electric propulsion at Robinson Research Institute, New Zealand

2025-09-09T22:31:32Z

The Robinson Research Institute is developing a type of electric propulsion for spacecraft called an applied-field magneto-plasma-dynamic (AF-MPD) thruster. The applied field module of the thruster features a cryocooler-cooled high-temperature-superconducting (HTS) magnet generating central fields exceeding 1 Tesla. This paper reports on the progress to date of the thruster test facilities established at the Institute to enable development of the AF-MPD and electric propulsion in general. The vacuum facilities consist primarily of a 1 m diameter, 3 m3 cylindrical chamber with a high-vacuum pumping speed, measured to be about 4200 L/s (Ar). The chamber can be reduced from atmospheric pressure to 1E10-5 hPa in about 2 h, enabling a rapid testing turn-around time, and maintains 5E10-4 hPa during thruster operation at typical mass flow rates of 5 mg/s (Ar). A pendulum thrust-stand has been purpose built to withstands static thruster loads of up to 30 kg and measure thrust forces up to 200 mN. It is also designed to be inherently insensitive to the unique challenges of measuring AF-MPD with superconducting magnets; strong magnetic fields, cryocooler vibration, and the thermal gradients. Initial thrust-stand testing, whilst implementing both water-cooling and a cryocooler showed it to be capable of measuring forces to a precision of approximately 1 mN and with an absolute accuracy of +/-2.3 mN (full scale). An extensive suite of software tools has also been developed to coordinate the large set of instruments needed to run the vacuum facilities, the thrust-stand, HTS magnet and cryocooler in addition to the many other auxiliary- and logging systems. Various upgrades to the facilities are in progress or planned.

Dynamic control of laser driven electron acceleration in a photonic structure using programmable optical pulses

2025-09-09T22:11:57Z

Progress in optical techniques has made precision control of the phase profile in optical pulses common and accessible in scientific laboratories. Carefully shaping the field profile of a laser pulse can be used to master the dynamics of electrons traveling in photonic accelerating structures such as the ones obtained by precisely aligning two dielectric gratings. Here we show that by applying a liquid-crystal-mask to program the phase and amplitude of an infrared laser pulse in combination with a pulse front tilt scheme, it is possible to implement dynamic control on a laser accelerator. This results in a nearly limitless live tuning capability of the accelerator beam dynamics, allowing the demonstration software-based correction of structure and optical front imperfections, implementation of transverse focusing schemes, control of the energy and charge of the output beam, and ultimately optimization of the interaction length, leading to measured energy gains of up to 0.55 MeV.

Quantum sensing of electron beams using solid-state spins

2025-09-09T20:08:32Z

Scattering experiments with energetic particles, such as free electrons, have been historically used to reveal the quantum structure of matter. However, realizing coherent interactions between free-electron beams and solid-state quantum systems has remained out of reach, owing to their intrinsically weak coupling. Realizing such coherent control would open up opportunities for hybrid quantum platforms combining free electrons and solid-state qubits for coincident quantum information processing and nanoscale sensing. Here, we present a framework that employs negatively charged nitrogen-vacancy centers (NV-) in diamond as quantum sensors of a bunched electron beam. We develop a Lindblad master equation description of the magnetic free-electron--qubit interactions and identify spin relaxometry as a sensitive probe of the interaction. Experimentally, we integrate a confocal fluorescence microscopy setup into a microwave-bunched electron beam line. We monitor charge-state dynamics and assess their impact on key sensing performance metrics (such as spin readout contrast), defining safe operating parameters for quantum sensing experiments. By performing $T_1$ relaxometry under controlled electron beam exposure, we establish an upper bound on the free-electron--spin coupling strength. Our results establish NV- centers as quantitative probes of free electrons, providing a metrological benchmark for free-electron--qubit coupling under realistic conditions, and chart a route toward solid-state quantum control with electron beams.

PWFA linear collider improvements -- from previous concepts to HALHF

2025-09-09T16:53:53Z

This note summarizes the major design changes from the plasma wakefield linear collider concept presented at Snowmass 2013 to the most recent HALHF 2.0 baseline.

Performance envelope of laser wakefield accelerators

2025-09-09T15:53:19Z

Laser wakefield accelerator experiments have made enormous progress over the past $\sim 20$ years, but their promise to revolutionize high-energy particle sources is only beginning to be realized. To make the next step toward engineering LWFAs for different accelerator outcomes, we need more reliable and quantitative models to predict performance. Using the data from $>50$ published experiments, we estimate scalings and the performance envelope. We compare the observed scalings with several models in the literature. We find that the total beam energy (centroid energy times beam charge) scales almost linearly with laser energy, supporting the value of investment in progressively higher energy driver lasers. The dataset includes pulse durations from 8 to 160 fs, but only laser wavelengths of 800 nm and 1 \si{\micro\meter}, meaning we could not check proposed wavelength scalings for alternative laser technologies. As a benchmark next-generation case, the observed scalings suggest that achieving a 100-GeV LWFA stage will require a $\gtrsim 30$ PW laser operating at electron density $<10^{17}/$cm$^3$.

Avoiding Beam Instabilities and Resonances With Circular Modes

2025-09-09T12:57:08Z

Beam instabilities and resonances affect the transverse dynamics in particle accelerators and, when encountered, can trigger emittance growth and beam loss. Resonance lines originate from non linear elements and effects in the lattice, imposing strict constraints on the choice of working points and narrowing the available tune space. Circular modes are round coupled beams with non zero angular momentum, provide an alternative beam motion and dynamics. In this study, we derive the third-order sextupole resonance conditions in the coupled (normal-mode) parametrization and show that, with circular-mode lattice design and beam operation, most of these resonance lines are naturally suppresses due to the inherent flatness of the mode.

Prism-based compensation of group delay dispersion in the components of a femtosecond laser resonator and analysis of the influence of prism configuration on laser radiation parameters

2025-09-08T13:12:46Z

A mathematical algorithm is described for calculating the minimum distance between prisms and the allowable prism insertion depth into the laser beam when solving the general problem of intracavity group delay dispersion (GDD) compensation. GDD is caused by the optical elements of the master oscillator in a femtosecond laser system. The calculation was carried out using analytical and geometrical methods. The influence of changing the distance between the prisms and the depth of their insertion into the laser beam on the GDD compensation has been investigated. Under experimental conditions, this changes the Q-factor of the laser resonator, which determines the central wavelength of the radiation and its spectral width in a titanium-sapphire laser.

Express Diagnostic of Intense Laser-driven MeV Radiation Source using Copper Isotopes

2025-09-08T11:53:08Z

We explored the generation and diagnosis of high-brightness MeV bremsstrahlung radiation caused by intense beam of relativistic electrons propagating in a tantalum converter. The intense electron beam was produced through direct laser acceleration mechanism in the interaction of relativistic high-power sub-ps laser pulse with near critical density plasma. We propose to detect the divergence angle and photon fluence of high-brightness and high-energy gamma radiation source based on the nuclear activation method. The radioactive 62^Cu was generated through photonuclear reactions 63^Cu(gamma,n) 62^Cu and the subsequent beta^+ decay of 62^Cu was measured to derive characteristics of the gamma radiation source. This method provides an express approach to diagnose the laser-driven MeV radiation source and a potential efficient way to produce 62^Cu isotopes.

First demonstration of coherent radiation imaging for bunch-by-bunch longitudinal compression monitoring

2025-09-04T22:37:47Z

Longitudinal bunch profile monitoring is a crucial diagnostic requirement in most accelerator facilities. This is particularly true in modern free-electron lasers and novel acceleration schemes, where bunch lengths are often <100 fs and standard instrumentation is invasive or lacks the required resolution. This paper proposes a new monitoring method in this challenging parameter space. Initial proof of principle results for relative compression monitoring via broadband imaging of coherent THz radiation are presented. The technique can utilize more conventional intensity monitoring or novel spatial distribution variation. Both techniques have been demonstrated using both invasive and non-invasive coherent radiation sources. These results pave the way for a future non-invasive longitudinal bunch profile monitor.

Shallow Angle Inverse Compton Scattering

2025-09-04T19:08:51Z

Inverse Compton Scattering at shallow angles can be used to tune the spectrum and increase the brightness of the emitted radiation. Here, we report on the demonstration of emission of visible light by a 4.7 MeV $e$-beam crossing a 780 nm laser at 5.8$^{\rm o}$ angle. Angular and spectral measurements of the radiation are in agreement with analytical and numerical predictions. We observe a characteristic dependence on the incoming polarization, not present in conventional head-on scattering, with suppression of the emission for $p$-polarization at condition equivalent to relativistic Brewster reflection.

The Compact Linear e$^+$e$^-$ Collider (CLIC)

2025-09-03T15:14:02Z

The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear e$^+$e$^-$ collider studied by the international CLIC and CLICdp collaborations. CLIC uses a two-beam acceleration scheme, in which normal-conducting high-gradient 12 GHz accelerating structures are powered via a high-current drive beam. CLIC is foreseen to be built and operated in stages. The initial 380 GeV stage, with a site length of 11 km, optimally combines the exploration of Higgs and top-quark physics, including a top threshold scan near 350 GeV. A higher-energy stage, still using the initial single drive-beam complex, can be optimised for any energy up to 2 TeV. Parameters are presented in detail for a 1.5 TeV stage, with a site length of 29 km. Since the 2018 ESPPU reporting, significant effort was invested in CLIC accelerator optimisation, technology developments and system tests, including collaboration with new-generation light sources and free-electron lasers. CLIC implementation aspects at CERN have covered detailed studies of civil engineering, electrical networks, cooling and ventilation, scheduling, and costing. The CLIC baseline at 380 GeV is now 100 Hz operation, with a luminosity of 4.5$\times 10^{34}$ cm$^{-2}$s$^{-1}$ and a power consumption of 166 MW. Compared to the 2018 design, this gives three times higher luminosity-per-power. The new baseline has two beam-delivery systems, allowing for two detectors operating in parallel. The cost estimate of the 380 GeV baseline is approximately 7.2 billion CHF. The construction of the first CLIC energy stage could start as early as ~2034/35 with first beams following a decade later. This report summarises the CLIC project, its implementation and running scenarios, with emphasis on new developments and recent progress. It concludes with an update on the CLIC detector studies and on the physics potential in light of the improved accelerator performance.

Wakefield acceleration of self-injected bunch in a conical plasma channels

2025-09-03T11:40:10Z

Laser wakefield acceleration is a widely studied method for accelerating charged particle bunches, with selfinjection being a key feature. However, as the bunch accelerates beyond the driver velocity, it shifts out of the maximal accelerating wakefield phase. This work proposes using a tapering cone channel to address this issue. The gradual narrowing synchronizes the bunch with the wake phase by reducing the bubble size, keeping the bunch in the accelerating phase. The obtained dependencies of the bunch length, field Ez, and mean longitudinal momentum pz on the channel radius are useful for further researches.

Plasma lens for the focusing of positron bunches

2025-09-03T11:28:01Z

The development of effective focusing schemes for positron bunches in plasma accelerators remains a significant challenge, as nonlinear regimes fail to create stable focusing channels for positrons. This work presents a method for focusing and improving the quality of positron bunches using a plasma lens operating in the linear regime. Through numerical simulations, we investigate two distinct focused positron bunch profiles: a purely Gaussian bunch and an elongated, flat-top bunch with Gaussian rising and falling edges. For both configurations, the results demonstrate the capability to achieve high-quality transverse focusing. Furthermore, beyond focusing, the proposed system enables potential possibility to reduce energy spread of positron bunches of the sequence after precursor.

Steels and Stainless Steels

2025-09-03T07:53:49Z

Steels, and in particular stainless steels, play a crucial role in the construction of large particle accelerators and high-energy physics experiments, of fusion reactors and their superconducting magnet structures. Such projects face severe material challenges, as they require a wide application of tightly specified steel products and grades, featuring a controlled microstructure and adequate mechanical, physical, magnetic and vacuum properties over a wide temperature range. A broad spectrum of relevant examples is presented, issued from the experience maturated within decades of building of large vacuum, cryogenic and associated structural systems that must guarantee a reliable, long-lasting service with limited interventions. The requirements, and in turn the metallurgical processes applied to achieve the final stringent properties are discussed - dictated by mechanical, magnetic or vacuum compatibility constraints and often by a combination of them. Case studies are developed. The study of a few major failure analysis cases and their root causes is also addressed.