https://arxiv.org/api/IAVq8nOfLSr+qd3l5OV9A/eEwNA 2026-04-11T12:47:11Z 8743 420 15 http://arxiv.org/abs/2509.13668v1 2025-09-17T03:42:51Z

Probing the dynamics of superconductor phase transitions induced by strong electromagnetic fields is vital to designing high power devices leveraging these materials. The development of high temperature superconductors (HTS) is particularly interesting due to critical temperatures ($T_c$) approaching 90 K, the ability to support high current densities, and their ability to operate in strong static magnetic fields. This work aims to determine the transition dynamics of these materials at radio-frequencies (rf) in the microwave range where they have enormous potential for new applications ranging from particle accelerators to dark matter searches. We have tested two types of coatings formed from rare earth barium copper oxide (REBCO): a film deposited by electron-beam physical vapor deposition, and HTS conductor tapes soldered to a copper substrate with exposed REBCO surfaces. Testing was performed via a hemispherical transverse-electric mode cavity that maximizes the surface rf magnetic field and minimizes the surface electric field on a 2-inch diameter sample. We report on steady-state measurements at low rf power, as well as fully time-resolved transition dynamics on the microsecond timescale seen for the first time with strong surface rf fields.

2025-09-17T03:42:51Z 7 pages, 6 figures Ankur Dhar Mitchell E. Schneider Emilio A. Nanni Jessica Golm Patrick Krkotić Walter Wuensch Sergio Calatroni Neil Lamas Teresa Puig Joffre Gutierrez http://arxiv.org/abs/2509.13555v1 2025-09-16T21:43:49Z

Research linking surface hydrides to Q-disease, and the subsequent development of methods to eliminate surface hydrides, is one of the great successes of SRF cavity R&D. We use time-dependent Ginzburg-Landau to extend the theory of hydride dissipation to sub-surface hydrides. Just as surface hydrides cause Q-disease behavior, we show that sub-surface hydrides cause high-field Q-slope (HFQS) behavior. We find that the abrupt onset of HFQS is due to a transition from a vortex-free state to a vortex-penetration state. We show that controlling hydride size and depth through impurity doping can eliminate HFQS.

2025-09-16T21:43:49Z 11 pages, 9 figures Aiden Harbick Mark Transtrum Nathan Sitaraman Tomás Arias Matthias Liepe http://arxiv.org/abs/2509.13526v1 2025-09-16T20:40:28Z

Recording changes in beam transverse positions re-ported by Beam Position Monitors (BPMs) in response to a beam deflection by an upstream dipole corrector (orbit response) is a powerful tool for analysis of accelerator optics and assisting with machine tuning. In the Fermilab Linac, orbit responses are recorded by oscillating the currents of up to 19 correctors, providing faster, drift-resistant measurements through frequency-domain analysis. This report describes the technique, including error estimations and consistency checks and shows an example of the measurements.

2025-09-16T20:40:28Z 2025 North American Particle Accelerator Conference A. Shemyakin Fermilab, Batavia, IL, USA A. Pathak Fermilab, Batavia, IL, USA R. Sharankova Fermilab, Batavia, IL, USA http://arxiv.org/abs/2509.13494v1 2025-09-16T19:51:55Z

The Side-Coupled Linac (SCL) section of the FNAL linac accelerates the beam from 117 MeV to 401.5 MeV, operating at 22-24 mA beam current. Transverse focusing is performed by 32 quadrupoles, and the beam orbit is guided by 19 dipole correctors and measured by 29 BPMs. The bunch length is measured in a single location by a Bunch Shape Monitor (BSM). This paper presents a three-step reconstruction of the machine optics. First, the transverse and longitudinal Twiss parameters at the start of the SCL section are determined using quadrupole scans and BSM measurements at different settings of an upstream cavity. Second, the quadrupole calibrations are adjusted based on differential-trajectory measurements. Finally, the beam is propagated along the SCL linac using the code TraceWin. A comparison between TraceWin simulations and the beam envelope measured by the 12 wire scanners of the SCL linac was performed. Transverse and longitudinal beam parameters at the entrance of the transition section will be reported.

2025-09-16T19:51:55Z 2025 North American Particle Accelerator Conference J. -P. Carneiro Fermi National Accelerator Laboratory, Batavia, USA E. Chen Fermi National Accelerator Laboratory, Batavia, USA A. Pathak Fermi National Accelerator Laboratory, Batavia, USA R. Sharankova Fermi National Accelerator Laboratory, Batavia, USA A. Shemyakin Fermi National Accelerator Laboratory, Batavia, USA http://arxiv.org/abs/2509.13478v1 2025-09-16T19:23:03Z

The Fermilab Linac delivers 400MeV, 25mA H$^-$; beam. The longitudinal bunch parameters are reconstructed using a Bunch Shape Monitor (BSM) installed in the middle of the Linac. For that, the bunch length is measured as a function of the phase of an upstream cavity and fitted to simulations. The cavity gradient and its phase with respect to the beam are recovered from readings of Beam Position Monitors (BPMs). Since the cavity provides a significant transverse defocusing, the BSM measurements are correlated with transverse beam size measurements by a wire scanner (WS). Simulations connect these three types of measurements, allowing to deduce the longitudinal emittance and Courant-Snyder parameters.

2025-09-16T19:23:03Z 2025 North American Particle Accelerator Conference R. Sharankova Fermi National Accelerator Laboratory, Batavia, IL, USA J-P. Carneiro Fermi National Accelerator Laboratory, Batavia, IL, USA E. Chen Fermi National Accelerator Laboratory, Batavia, IL, USA A. Shemyakin Fermi National Accelerator Laboratory, Batavia, IL, USA http://arxiv.org/abs/2509.13465v1 2025-09-16T19:02:54Z

Fermilab is upgrading its Booster synchrotron to increase ramp rate and intensity. This is part of the Proton Improvement Plan (PIP-II) that will allow the Main Injector to achieve proton beam power of 1.2 MW within the next few years. This upgrade includes running the 55-year-old Booster magnets at 20 Hz instead of the usual 15 Hz, and construction of some shorter and wider aperture versions of these combined-function gradient magnets. Magnetic measurements were performed to characterize the present 15 Hz AC performance, and then again with 20 Hz ramp cycle to ensure performance and compatibility in this new operating regime. A 3 m-long curved flat-coil was developed for these measurements using Printed Circuit Board (PCB) technology. The probe also has a separate 0.5 m-long body-field probe, allowing integral, body, and end fields to be measured across 100 mm of the magnet aperture. The sampling rate for these measurements during the AC cycle was 200 kHz, and field resolution was better than 0.01%. Details of the probe, measurements, and results are presented.

2025-09-16T19:02:54Z 2025 International Conference on Magnet Technology (MT29) J. DiMarco D. Assell T. Cummings D. Johnson V. Kashikhin M. Kifarkis J. Kuharik J. Larson M. Mubarak S. Poopathi K. Triplett http://arxiv.org/abs/2509.13455v1 2025-09-16T18:40:24Z

The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory (ORNL) is being upgraded from 1.0 GeV to 1.3 GeV (or 1.4 to 2.8 MW). Several water-cooled magnets have been upgraded to transport 30% higher beam energy. Fermilab contributed the magnet design for the new chicane magnets and injection/extraction septum. Designing the magnets was a challenging task because the new magnets required good combined integrated field quality and needed to occupy the old magnets space but with about 20% greater integrated magnetic field. Additional strong requirements applied to the magnets fringe field so as not to disturb the circulating beam. After fabrication of the magnets, an extensive measurement campaign was developed and performed at Fermilab's Magnet Test Facility. The measurements needed to assess magnet performance and provide comparison to design calculations. These included verification of field strength and harmonics along an 8 m length and 200 mm good field diameter for the chicane dipoles, end-field Hall probe mapping of these magnets, and measurements along two differently curved trajectories within the ~3 m septum gradient magnet. Details of the measurements and systems are presented along with results and comparison to field models.

2025-09-16T18:40:24Z 2025 International Conference on Magnet Technology (MT29) J. DiMarco D. Harding V. Kashikhin O. Kiemschies M. Kifarkis A. Makulski J. Nogiec S. Stoynev T. Strauss M. Tartaglia P. Thompson http://arxiv.org/abs/2506.03796v3 2025-09-16T15:03:48Z

Geoff is a collection of Python packages that form a framework for automation of particle accelerator controls. With particle accelerator laboratories around the world researching machine learning techniques to improve accelerator performance and uptime, a multitude of approaches and algorithms have emerged. The purpose of Geoff is to harmonize these approaches and to minimize friction when comparing or migrating between them. It provides standardized interfaces for optimization problems, utility functions to speed up development, and a reference GUI application that ties everything together. Geoff is an open-source library developed at CERN and maintained and updated in collaboration between CERN and GSI as part of the EURO-LABS project. This paper gives an overview over Geoff's design, features, and current usage.

2025-06-04T09:58:48Z 18 pages, 5 figures. Submitted to SoftwareX SoftwareX 32 (2025) 102335 Penelope Madysa Sabrina Appel Verena Kain Michael Schenk 10.1016/j.softx.2025.102335 http://arxiv.org/abs/2509.11522v2 2025-09-16T06:58:11Z

Electron-positron colliders operating in the GeV region of center-of-mass energies or the Tau-Charm energy region, have been proven to enable competitive frontier research, due to its several unique features. With the progress of high energy physics in the last two decades, a new-generation Tau-Charm factory, Super Tau Charm Facility (STCF) has been actively promoting by the particle physics community in China. STCF holds great potential to address fundamental questions such as the essence of color confinement and the matter-antimatter asymmetry in the universe in the next decades. The main design goals of STCF are with a center-of-mass energy ranging from 2 to 7 GeV and a peak luminosity surpassing 5*10^34 cm^-2s^-1 that is optimized at a center-of-mass energy of 4 GeV, which is about 50 times that of the currently operating Tau-Charm factory - BEPCII. The STCF accelerator is composed of two main parts: a double-ring collider with the crab-waist collision scheme and an injector that provides top-up injections for both electron and positron beams. As a typical third-generation electron-positron circular collider, the STCF accelerator faces many challenges in both accelerator physics and technology. In this paper, the conceptual design of the STCF accelerator complex is presented, including the ongoing efforts and plans for technological R&D, as well as the required infrastructure. The STCF project aims to secure support from the Chinese central government for its construction during the 15th Five-Year Plan (2026-2030) in China.

2025-09-15T02:20:12Z 296 pages Jiancong Bao Anton Bogomyagkov Zexin Cao Mingxuan Chang Fangzhou Chen Guanghua Chen Qi Chen Qushan Chen Zhi Chen Kuanjun Fan Hailiang Gong Duan Gu Hao Guo Tengjun Guo Chongchao He Tianlong He Kaiwen Hou Hao Hu Tongning Hu Xiaocheng Hu Dazhang Huang Pengwei Huang Ruixuan Huang Zhicheng Huang Hangzhou Li Renkai Li Sangya Li Weiwei Li Xuan Li Xunfeng Li Yu Liang Chao Liu Tao Liu Xiaoyu Liu Xuyang Liu Yuan Liu Huihui Lv Qing Luo Tao Luo Mikhail Skamarokha Shaohang Ma Wenbin Ma Masahito Hosaka Xuece Miao Yihao Mo Kazuhito Ohmi Jian Pang Guoxi Pei Zhijun Qi Fenglei Shang Lei Shang Caitu Shi Kun Sun Li Sun Jingyu Tang Anxin Wang Chengzhe Wang Hongjin Wang Lei Wang Qian Wang Shengyuan Wang Shikang Wang Ziyu Wang Shaoqing Wei Yelong Wei Jun Wu Sang Wu Chunjie Xie Ziyu Xiong Xin Xu Jun Yang Penghui Yang Tao Yang Lixin Yin Chen Yu Ze Yu Youjin Yuan Yifeng Zeng Ailin Zhang Haiyan Zhang Jialian Zhang Linhao Zhang Ning Zhang Ruiyang Zhang Xiaoyang Zhang Yihao Zhang Yangcheng Zhao Jingxin Zheng Demin Zhou Hao Zhou Yimei Zhou Zeran Zhou Bing Zhu Xinghao Zhu Zi'an Zhu Ye Zou http://arxiv.org/abs/2509.12030v1 2025-09-15T15:13:20Z

While the prediction of AC losses during transients is critical for designing large-scale low-temperature superconducting (LTS) magnets, brute-force finite-element (FE) simulation of their detailed geometry down to the length scale of the conductors is a computational challenge. Multi-scale methods, balancing between a coarse approximation of the fields at the scale of the magnet and a detailed description at the scale of the conductors, are promising approaches to reduce the computational load while keeping a sufficient accuracy. In this work, we introduce a neural network approach to accelerate multi-scale magneto-thermal simulations of LTS magnets by replacing costly single-turn FE models with neural network surrogates. The neural network architecture is presented and discussed, together with an automated procedure for generating simulation data for its training. The resulting accelerated multi-scale model is used to simulate current ramp-up procedures for the IBA S2C2 magnet. The surrogate-based multi-scale model is compared with a conventional multi-scale model based on a composite wire-in-channel FE model. The surrogate model is shown to reproduce single-turn filament hysteresis, inter-filament coupling, and eddy losses, while the computational time of the multi-scale method is reduced by a factor of 800.

2025-09-15T15:13:20Z 5 pages, 6 figures Louis Denis Julien Dular Vincent Nuttens Mariusz Wozniak Benoît Vanderheyden Christophe Geuzaine http://arxiv.org/abs/2509.11014v1 2025-09-14T00:04:41Z

The high gradients potentially achievable in distributed-coupling C-band photoinjectors make them attractive for many high brightness applications. Here we discuss optimization results for a 1.6 cell C-band photoinjector with a 240 MV/m peak field at the cathode that delivers a 250 pC electron bunch charge. We use a Multi-Objective Genetic Algorithm (MOGA), obtaining a Pareto front of emittance vs. bunch length. We also perform MOGA optimizations including an aperture to retain only a bright beam core. We find this reduces the emittance of the final beam by more than factor of 2 in some cases. For example, we find that at a root mean square bunch length of 1.6 ps, the use of an aperture improves the transverse emittance from 120 nm to 58 nm assuming negligible photocathode intrinsic emittance. The sacrificial charge at the periphery of the electron beam removed by the aperture linearizes the final slice phase space inside of the remaining beam core. The results obtained surpass the experimental state-of-the-art for beamlines with similar bunch charge.

2025-09-14T00:04:41Z M. Kaemingk P. M. Anisimov J. M. Maxson J. B. Rosenzweig E. I. Simakov H. Xu http://arxiv.org/abs/2509.10738v1 2025-09-12T22:55:48Z

We report on the experimental characterization of the RIT-2.5 radiofrequency ion thruster, complemented by particle-in-cell (PIC) simulations to establish correlations between plasma parameters and extracted beam properties. The thruster was operated in a dedicated vacuum facility and equipped with optical spectroscopy, Faraday cup, and retarding field energy analyzer (RFEA) diagnostics. Electron temperature was determined from optical emission line ratios (Te about 3-7 eV), while the energy distribution of extracted ions was measured using the RFEA. A comparative simulation campaign was performed to reproduce the experimentally observed energy spectra and to extract plasma density values otherwise inaccessible due to the lack of intrusive diagnostics, yielding best-fit estimates of ne about 1.2x10E16 m-3. The results demonstrate that the energy spread of the extracted beam is strongly dependent on plasma density and electron temperature. The combined experimental-numerical approach provides a non-intrusive yet robust pathway for performance optimization of RF ion thrusters, offers validation benchmarks for advanced plasma simulation codes, and is particularly well-suited to compact micro-N-class thrusters for nanosatellite attitude and orbit control.

2025-09-12T22:55:48Z N. Joshi O. Meusel http://arxiv.org/abs/2509.09905v1 2025-09-12T00:23:32Z

The low-level RF (LLRF) systems for linear accelerating structures are typically based on heterodyne architectures. The linear accelerators normally have many RF stations and multiple RF inputs and outputs for each station, so the complexity and size of the LLRF system grows rapidly when scaling up. To meet the design goals of being compact and affordable for future accelerators, or upgrading existing ones, we have developed and characterized the next generation LLRF (NG-LLRF) platform based on the RF system-on-chip (RFSoC) for S-band and C-band accelerating structures. The integrated RF data converters in RFSoC sample and generate the RF signals directly without any analogue mixing circuits, which significantly simplified the architecture compared with the conventional LLRF systems. We have performed high-power tests for the NG-LLRF with the S-band accelerating structure in the Next Linear Collider Test Accelerator (NLCTA) test facility at SLAC National Accelerator Laboratory and a C-band structure prototyped for Cool Cooper Collider (CCC). The NG-LLRF platform demonstrated pulse-to-pulse fluctuation levels considerably better than the requirements of the targeted applications and high precision and flexibility in generating and measuring the RF pulses. In this paper, the characterization results of the platform with different system architectures will be summarized and a selection of high-power test results of the NG-LLRF will be presented and analyzed.

2025-09-12T00:23:32Z C. Liu E. Snively R. Herbst K. Kim E. A. Nanni http://arxiv.org/abs/2503.19862v3 2025-09-11T13:51:23Z

This document, written by early career researchers (ECRs) in particle physics, aims to represent the perspectives of the European ECR community and serves as input for the 2025--2026 update of the European Strategy for Particle Physics. With input from a community-wide survey, it highlights key challenges faced by ECRs -- career stability, funding access and long-term research opportunities -- while proposing policy recommendations and targeted initiatives. It underscores the importance of practices fostering diverse, equitable, inclusive and healthy workplaces, as well as of stronger ECR communities, and highlights how effective communication and interdisciplinary collaborations reinforce the societal relevance of particle physics and promote continued support for large-scale and long-term projects. Finally, the future of both collider and beyond-collider experiments is addressed, emphasising the critical role of ECRs in shaping future projects. The ECR contribution is formed of two parts: the ten-page executive summary submitted as input to the European Strategy for Particle Physics Update and, as backup document, this extended white paper providing additional context.

2025-03-25T17:29:10Z Endorsed by the ECFA ECR Panel. Editor and author attribution in the document Jan-Hendrik Arling Deutsches Elektronen-Synchrotron DESY, Hamburg, Germany Alexander Burgman Stockholm University, Stockholm, Sweden Christina Dimitriadi KTH Royal Institute of Technology, Stockholm, Sweden Ulrich Einhaus Karlsruhe Institute for Technology, Karlsruhe, Germany Axel Gallén Uppsala University, Uppsala, Sweden Abdelhamid Haddad Laboratoire de Physique de Clermont Auvergne, CNRS/IN2P3, Université Clermont Auvergne, France Laura Huhta University of Jyväskylä, Jyväskylä, Finland Armin Ilg University of Zürich, Zürich, Switzerland Jan Klamka University of Warsaw, Warsaw, Poland Elizabeth Long Charles University, Prague, Czech Republic Thomas Madlener Deutsches Elektronen-Synchrotron DESY, Hamburg, Germany Arnau Morancho Tardà Niels Bohr Institute, Copenhagen, Denmark Emanuela Musumeci Instituto de Física Corpuscular Krzysztof Mękała Deutsches Elektronen-Synchrotron DESY, Hamburg, Germany University of Warsaw, Warsaw, Poland Elena Pompa Pacchi The University of Oklahoma, Norman, Oklahoma, USA Marvin Pfaff Imperial College London, London, United Kingdom Daniel Reichelt CERN, Geneva, Switzerland Leonhard Reichenbach CERN, Geneva, Switzerland University of Bonn, Bonn, Germany Birgit Stapf CERN, Geneva, Switzerland Francesco P. Ucci University of Pavia, Pavia, Italy INFN - Sezione di Pavia, Pavia, Italy Erik Wallin Lund University, Lund, Sweden Harriet Watson The University of Edinburgh, Edinburgh, United Kingdom Sagar Vidya Addepalli SLAC National Accelerator Laboratory, Menlo Park, USA Bruno Alves Laboratoire Leprince-Ringuet, CNRS/IN2P3, Ecole Polytechnique, Institut Polytechnique de Paris, Palaiseau, France Robert Mihai Amarinei University of Geneva, Geneva, Switzerland Ricardo Barrué Laboratório de Instrumentação e Física Experimental de Partículas Lydia Brenner National Institute for Subatomic Physics Giacomo Da Molin Laboratório de Instrumentação e Física Experimental de Partículas Arturo de Giorgi Institute for Particle Physics Phenomenology, Durham University, Durham, United Kingdom Bohdan Dudar University of Mainz, Mainz, Germany Francesco Giuli Dipartimento di Fisica, Università degli Studi di Roma Tor Vergata, Rome, Italy INFN - Sezione di Roma 2, Rome, Italy Andrea Gurgone Università di Pisa, Pisa, Italy INFN - Sezione di Pisa, Pisa, Italy César Jesús-Valls Kavli IPMU Antoine Laudrain Deutsches Elektronen-Synchrotron DESY, Hamburg, Germany Martin J. Losekamm Technical University of Munich, Munich, Germany Rafał Masełek Laboratoire de physique subatomique et de cosmologie de Grenoble, Grenoble, France Wrishik Naskar University of Glasgow, Glasgow, United Kingdom Miquel Nebot-Guinot The University of Edinburgh, Edinburgh, United Kingdom Marko Pesut University of Zürich, Zürich, Switzerland Thomas Pöschl CERN, Geneva, Switzerland Efrain P. Segarra Paul Scherrer Institute, Villigen, Switzerland Rebecca Taylor Imperial College London, London, United Kingdom CERN, Geneva, Switzerland Pavel Vana Charles University, Prague, Czech Republic Hannah Wakeling John Adams Institute for Accelerator Science, University of Oxford, Oxford, United Kingdom Aidan R. Wiederhold University of Manchester, Manchester, United Kingdom http://arxiv.org/abs/2410.21162v3 2025-09-10T18:40:15Z

We present the first demonstration of simultaneous phase space compression in two spatial dimensions of a positive muon beam, the first stage of the novel high-brightness muon beam under development by the muCool collaboration at the Paul Scherrer Institute. The keV-energy, sub-mm size beam would enable a factor 10$^5$ improvement in brightness for precision muSR, and atomic and particle physics measurements with positive muons. This compression is achieved within a cryogenic helium gas target with a strong density gradient, placed in a homogeneous magnetic field, under the influence of a complex electric field. In the next phase, the muon beam will be extracted into vacuum.

2024-10-28T16:03:41Z Submission to SciPost SciPost Phys. Core 8, 071 (2025) A. Antognini N. J. Ayres I. Belosevic V. Bondar A. Eggenberger M. Hildebrandt R. Iwai K. Kirch A. Knecht G. Lospalluto J. Nuber A. Papa M. Sakurai I. Solovyev D. Taqqu T. Yan 10.21468/SciPostPhysCore.8.4.071