https://arxiv.org/api/u3NyEVtRg2i3rwBRxo0yvDkd0XM 2026-04-11T09:43:58Z 8743 390 15 http://arxiv.org/abs/2510.09640v1 2025-10-02T08:42:28Z

This paper summarizes our work on the fabrication, characterization, and modeling of a high-temperature superconducting double racetrack (DRC) coil. Using an in-house developed winding system, a DRC was wound with ReBCO superconducting tape. The coil was first characterized under direct current to obtain its IV characteristic and its critical current. It was then characterized under alternating current (60 Hz and 120 Hz) to measure its alternating current losses (AC losses). These measurements were compared with a 3D finite element model and show reasonable agreement given the modeling assumptions. The coil exhibits good performance, did not undergo any degradation during winding, and can be used for further studies. This validates our fabrication process and our approach to superconducting coil characterization.

2025-10-02T08:42:28Z in French language SYMPOSIUM DE GENIE ELECTRIQUE (SGE 2025), Jul 2025, Toulouse, France Lauro Ferreira GeePs Yasmine Baazizi GeePs Simon Meunier GeePs Tanguy Phulpin GeePs Tianyong Gong GeePs Loïc Quéval GeePs http://arxiv.org/abs/2510.00640v1 2025-10-01T08:16:23Z

Precise spectral control in the hard X-ray regime remains a long-standing challenge that limits applications in atomic-scale science and ultrafast spectroscopy. We present an actively mode-locked cavity-based X-ray free-electron laser that achieves deterministic spectral programmability with phase-locked pulse trains and comb-like spectra, by coherently modulating the electron-beam energy. Three-dimensional time-dependent simulations predict \SI{700}{\micro\joule} total energy, \SI{30}{\giga\watt} peak power, and frequency-comb spacing of \SI{1.55}{\electronvolt} set by the modulation frequency. We further develop selective single-line amplification via undulator tapering and absolute frequency positioning through modulation-laser tuning with better than $2 \times 10^{-5}$ relative precision. Importantly, stable mode-locked operation persists under >80\% peak-to-peak cavity-reflectivity variations, substantially relaxing requirements on X-ray optics. These results establish active mode locking as a practical route to fully coherent, spectrally agile hard X-ray sources and enable new opportunities in time-resolved core-level spectroscopy, X-ray quantum optics, and precision metrology.

2025-10-01T08:16:23Z Nanshun Huang Hanxiang Yang Haixiao Deng http://arxiv.org/abs/2509.25870v1 2025-09-30T07:06:31Z

The production of high-yield, longitudinally polarized positron beams represents an outstanding challenge in advanced accelerator science. Laser-driven schemes offer a compact alternative but typically yield only transverse polarization, or require pre-polarized electron beams, and struggle to efficiently accelerate positrons to high energies. Here, we introduce an all-optical scheme that overcomes these limitations by integrating positron generation, acceleration, and spin manipulation in a unified framework. Through a head-on collision between an ultraintense, circularly polarized laser pulse and a counterpropagating unpolarized electron beam, we drive a robust QED cascade. The nonlinear Breit-Wheeler process within the cascade produces positrons that are born directly within the strong laser field. Crucially, these positrons are instantaneously captured and accelerated to multi-GeV energies (up to $\sim$9 GeV) via a direct laser acceleration mechanism, while their spins are simultaneously rotated to longitudinal alignment by the field dynamics. Our Monte-Carlo simulations confirm the simultaneous achievement of a high positron yield ($\sim$20 $e^+/e^-$), a high average longitudinal polarization ($\sim$50\%), and GeV-scale energies. This all-optical source, feasible at upcoming ultraintense laser facilities, presents a compact and efficient solution for applications in collider physics and fundamental high-energy experiments.

2025-09-30T07:06:31Z Rui-Qi Qin Peng-Pei Xie Yan-Fei Li Xian-Zhang Wu Zheng-Yang Zuo Bing-Jun Li Jun Liu Liang-Liang Ji Yu-Tong Li http://arxiv.org/abs/2509.24775v1 2025-09-29T13:40:21Z

Laser-accelerated electron bunches and the secondary radiation sources they produce exhibit unique temporal resolution for probing ultrafast physical processes due to their ultrashort pulse duration. The inherently short temporal profile of these pulses leads to extremely high peak bunch currents, thereby enabling a wide range of practical applications. In this study, we propose an innovative method for generating such bunch by utilizing high-harmonics generated through laser-plasma interaction as the driving pulse, which subsequently interacts with a thin target to produce an attosecond electron bunch. Using this method, we successfully generated an electron bunch characterized by excellent collimation and an ultra-short duration of approximately 100 attoseconds, representing a substantial reduction in bunch duration. The total bunch charge achieved was 0.38 nC, with an emittance of $4.5 \times 10^{-3} \, \text{mm} \cdot \text{mrad}$ and a divergence angle of approximately $10^\circ$. Moreover, by systematically analyzing the effects of laser intensity and target positioning, we determined an optimized set of simulation parameters. This research establishes a robust foundation for the generation of ultrashort electron bunches and opens new prospects for their application in advanced high-energy and attosecond physics experiments.

2025-09-29T13:40:21Z Yang He Mamat Ali Bake Cheng-Qi Zhang Bai-Song Xie http://arxiv.org/abs/2509.05228v2 2025-09-27T20:01:29Z

This paper describes performance of a voltage controlled phase shifter designed for a high average power and a high figure of merit. The device is a reflection-type, resonant phase shifter that utilizes ferroelectric capacitors and impedance matching to the port impedance. With state-of-the-art ferroelectric materials, the device achieves a high Figure of Merit of nearly a thousand degrees phase shift per dB insertion loss at 800 MHz, along with sub-microsecond response. This phase shifter is capable of handling average power up to a megawatt. Its application is expected to enhance the electrical efficiency of particle accelerators, reducing both capital and operating costs.

2025-09-05T16:45:20Z Improved the clarity of the application of equation (14), which depends on the value of D being larger or smaller than 1 Ilan Ben-Zvi Alick Macpherson Samuel Smith http://arxiv.org/abs/2508.18450v2 2025-09-26T15:19:33Z

The Mu2e experiment at Fermilab will search for the charged lepton flavour violating process of coherent neutrinoless muon-to-electron conversion in the presence of an aluminum nucleus. The muons are produced by an 8 GeV proton beam from the Fermilab Booster striking a production target to create hadrons that decay to muons. The production target design space is strongly constrained by a required one-year operating lifetime and the need for radiative cooling in a vacuum. Uncertainties in the lifetime of the existing baseline design - a monolithic, segmented tungsten (WL10) target - are large, particularly due to unknown effects of radiation damage at the very high proton fluences expected in the experiment. We have begun evaluating a new design utilizing Inconel 718. Here, we present an engineering analysis of a prototype modular design. specifically thermal management, structural stability, fatigue lifetime, and fabrication changes. The results approve a promising new target design for the Mu2e experiment.

2025-08-25T20:00:02Z 13th International Conference on Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation (MEDSI2025) JACoW 2025 Z. Liu Fermi National Accelerator Laboratory J. Williams Fermi National Accelerator Laboratory A. Makovec Fermi National Accelerator Laboratory M. Hedges Fermi National Accelerator Laboratory F. Pellemoine Fermi National Accelerator Laboratory K. Yonehara Fermi National Accelerator Laboratory G. Annala Fermi National Accelerator Laboratory K. Lynch Fermi National Accelerator Laboratory M. Bloomer York College / CUNY J. Popp Emory University A. Edmonds Emory University J. Miller Boston University 10.18429/JACoW-MEDSI2025-THOB03 http://arxiv.org/abs/2509.22397v1 2025-09-26T14:23:57Z

State-of-the-art additive manufacturing technologies are not only finding ever-wider applications in everyday life, but also assuming an increasingly important role in scientific research. This kind of advanced manufacturing method eliminates many of the constraints of conventional processes in fabricating components with complex external shapes or intricate internal structures, thereby providing enhanced flexibility for the design and realization of a new generation of more efficient particle accelerators and storage rings. The RACERS team initiated by the Stochastic Cooling Group at GSI, Germany, is worldwide one of the first teams working on this topic. Based on the metal 3D-printing technology, two novel accelerating structures and one efficient cooling plate for a future stochastic cooling system are under development at GSI and for the FAIR project, respectively. Some successful experience as well as learnt lessons will be presented.

2025-09-26T14:23:57Z Chuan Zhang Roland Böhm Eduard Boos Ramy Cherif Alexander Japs Stefan Wunderlich http://arxiv.org/abs/2411.11621v2 2025-09-26T07:00:16Z

Spin-polarized particle beams are of interest for applications like deep-inelastic scattering, e.g. to gain further understanding of the proton's nuclear structure. With the advent of high-intensity laser facilities, laser-plasma-based accelerators offer a promising alternative to standard radiofrequency-based accelerators, as they can shorten the required acceleration length significantly. However, in the scope of spin-polarized particles, they bring unique challenges. This paper reviews the developments in the field of spin-polarized particles, focusing on the interaction of laser pulses and high-energy particle beams with plasma. The relevant scaling laws for spin-dependent effects in laser-plasma interaction, as well as acceleration schemes for polarized leptons, ions, and gamma quanta, are discussed.

2024-11-18T14:51:10Z 43 pages, 14 figures, submitted to Reports on Progress in Physics Lars Reichwein Zheng Gong Chuan Zheng Liangliang Ji Alexander Pukhov Markus Büscher 10.1088/1361-6633/ae1988 http://arxiv.org/abs/2509.20292v1 2025-09-24T16:25:57Z

Fringe field effects are computed from simulated and measured quadrupole magnetic field gradients, enabling a more realistic modelling of the medium energy section optics in TRIUMF's RIB postaccelerator. Quantifying the fringe field optics using the method developed by Matsuda and Wollnik allows for the use of parallel modelling tune optimizations for machine operation, providing operators with an efficient means to re-tune the variable energy drift tube linac for RIB delivery.

2025-09-24T16:25:57Z O. Shelbaya O. Hassan R. Baartman O. Kester C. Pearce T. Planche L. Zhang http://arxiv.org/abs/2509.20413v1 2025-09-24T08:32:47Z

This lecture presents an overview of the basic concepts and fundamentals of Engineering Materials within the framework of accelerator applications. After a short introduction, main concepts relative to the structure of matter are reviewed, like crystalline structures, defects and dislocations, phase diagrams and transformations. The microscopic description is correlated with physical properties of materials, focusing in metallurgical aspects like deformation and strengthening. Main groups of materials are addressed and described, namely, metals and alloys, ceramics, polymers, composite materials, and advanced materials, where brush-strokes of tangible applications in particle accelerators and detectors are given. Deterioration aspects of materials are also presented, like corrosion in metals and degradation in plastics.

2025-09-24T08:32:47Z 10 pages, contribution to the CAS - CERN Accelerator School: Mechanical & Materials Engineering for Particle Accelerators and Detectors, 2-15 June 2024, Sint-Michielsgestel, Netherlands Ana Arauzo http://arxiv.org/abs/2509.19872v1 2025-09-24T08:24:06Z

The use of materials in particle accelerator applications implies the consideration of physical properties in different environments than usual industrial applications. Cryogenic temperatures, high radiation, medium to high vacuum and high magnetic fields are requirements for which the behavior of materials has to be evaluated. In this lecture, Thermal, Electrical and Magnetic properties are briefly introduced, highlighting the mechanisms governing variation with temperature and magnetic field. Standards and testing methods for different properties are described, illustrated with practical examples. With regard to the characterization of thermal properties of a material, testing methods of heat capacity and thermal conductivity are described, with details of the main working principle and measurement examples. Determination of electrical resistivity and the residual resistivity ratio (RRR) are the main characteristics of electrical properties, together with specific characterization of superconducting materials. Testing magnetic properties deserve special attention; different methods are commonly employed to characterize non-magnetic and magnetic materials. In magnetic metals and ferrites non-linear behavior and hysteresis effects need to be considered in order to assess their suitability for applications or to model material performance.

2025-09-24T08:24:06Z 15 pages, contribution to the CAS - CERN Accelerator School: Mechanical & Materials Engineering for Particle Accelerators and Detectors, 2-15 June 2024, Sint-Michielsgestel, Netherlands Ana Arauzo http://arxiv.org/abs/2509.19193v1 2025-09-23T16:12:33Z

Recent reviews in ultrafast electron diffraction (UED) have claimed that relativistic electrons exhibit enhanced elastic scattering efficiency, frequently quantified as a γ^2 increase in the differential cross section. These claims, however, originate from angular-domain analyses that overlook the compression of scattering angles θwith increasing electron energy, leading to an apparent, but artificial, enhancement. In this work, we recast the problem in momentum-transfer space q, where scattering is accurately accounted for. This transformation eliminates the angular compression artefact and reveals that high-energy scaling follows a simple β^{-2} dependence, with no intrinsic relativistic gain. We demonstrate this by directly integrating relativistic differential elastic-scattering cross sections from ELSEPA and by applying a straightforward transformation of the well-known Mott-Massey formalism into q-space. The results are general, with calculations performed for elements from carbon to gold and for energies between 50 keV and 5000 keV. They reproduce the long-established trend in total elastic scattering cross sections, in which scattering strength decreases with increasing electron kinetic energy. Practically, at energies above roughly 50 keV, scattering is already dominated by the forward direction, and most of the scattered intensity falls within the acceptance range of typical UED detectors. These findings correct a widespread misconception in the UED literature and provide a more accurate and intuitive framework for interpreting and optimizing high-energy electron scattering experiments.

2025-09-23T16:12:33Z 10 pages including references, 2 figures Grant Brassem Christian Viernes German Sciaini http://arxiv.org/abs/2509.19026v1 2025-09-23T14:00:35Z

The CEPC clock issue is related with the RF frequency coordination between the various accelerator systems and may affect the operation modes of both the accelerator and the detector. The timing structure of CEPC has been restudied with the collaboration of the accelerator team and the detector team. After discussions between two sides, the CEPC bunch structure is set such that the spacings between adjacent bunches in any CEPC operation mode are integer numbers of 23.08 ns. The master CEPC clock will be provided by the accelerator to the detector systems with a frequency of 43.33 MHz, synchronous to the beam. The CEPC detector system relies on the clock to sample physics signal at the right time. It was found that if the circumference of CEPC is slightly changed to 99955.418 m, not only is the orbit length closer to 100 km, but also the detector would benefit more for the first 10-year operation.

2025-09-23T14:00:35Z Dou Wang Jie Gao Jianchun Wang Dapeng Jin Xiaohao Cui Ge Lei Cai Meng Wei Wei Jingbo Ye Yiwei Wang Jiyuan Zhai Yuhui Li Zhonghui Ma Jun Hu Shengsen Sun Xiaolong Wang http://arxiv.org/abs/2509.18558v1 2025-09-23T02:32:55Z

The successful operation of the future Electron-Ion Collider is contingent on maintaining high hadron beam polarization up to 275 GeV. The Hadron Storage Ring lattice, however, features a symmetry-breaking interaction region that excites strong, non-systematic spin resonances, posing a significant threat to polarization preservation. This paper systematically investigates two complementary strategies to ensure high polarization transmission. The first method involves optimizing the vertical betatron phase advance between Siberian snakes to orchestrate a cancellation of depolarizing kicks across the ring. We demonstrate through simulations that both dynamic and fixed-optics solutions based on this principle can successfully preserve polarization through the strongest resonances. The second, more powerful approach involves optimizing the snake rotation axes to suppress resonance driving terms at their source. We revisit established symmetric configurations, such as the Lee-Courant schemes, and introduce a novel, highly symmetric ``Doubly Lee-Courant" (DLC) scheme, which enforces a local \(π\) spin phase advance across every consecutive pair of snakes. Our analysis reveals a clear performance hierarchy, with the DLC configuration providing an exceptionally robust and energy-insensitive baseline for polarization preservation. We conclude that a hybrid strategy, using a DLC snake scheme as a symmetric foundation and betatron phase tuning for fine corrections, offers the most effective path forward for the EIC and future high-energy polarized beam facilities.

2025-09-23T02:32:55Z Eiad Hamwi Georg H. Hoffstaetter http://arxiv.org/abs/2509.15383v2 2025-09-22T14:11:05Z

The Full Flow Purifier for Fermilab's Muon Campus uses a charcoal bed surrounded by a liquid nitrogen jacket to purify up to 240 g/s of helium gas. Fabrication by Ability Engineering Technology Inc. has been completed and the purifier delivered to Fermilab. It is the largest purifier to be used at Fermilab based on both capacity and size. A previous paper discussed the design of purifier for various operational conditions and horizontal shipping. The purifier is designed to withstand 5g force in vertical and 2g force in lateral and longitudinal directions. Transportation experience from vendor to Fermilab and within site is discussed. Integration of the purifier involved design and fabrication of a liquid nitrogen transfer line, regeneration system, and helium piping to connect it to Muon Campus cryogenic system. It also involved establishing electrical, instrumentation and controls connections to the system. Integration of the purifier is discussed in detail. The purifier is to be commissioned using up to 4 MYCOM helium compressors to supply helium and liquid nitrogen supplied by a 60,000-liter tank. Actual effectiveness of the 3-stream heat exchanger is to be estimated based on measured temperatures and flow rate. Impurity levels will be monitored at inlet and outlet of the purifier. Theoretical adsorption capacity of the purifier is calculated based on the measured temperatures and flowrates and is compared to actual adsorption capacity over time.

2025-09-18T19:40:34Z 26th Joint Cryogenic Engineering Conference and International Cryogenic Materials Conference (CEC/ICMC 2025) J. Subedi Fermi National Accelerator Laboratory, Batavia, IL, USA T. Tope Fermi National Accelerator Laboratory, Batavia, IL, USA B. Hansen Fermi National Accelerator Laboratory, Batavia, IL, USA M. White Fermi National Accelerator Laboratory, Batavia, IL, USA J. Tillman Fermi National Accelerator Laboratory, Batavia, IL, USA V. Patel Fermi National Accelerator Laboratory, Batavia, IL, USA W. Cyko Fermi National Accelerator Laboratory, Batavia, IL, USA J. Dong Fermi National Accelerator Laboratory, Batavia, IL, USA