https://arxiv.org/api/Z4i2TzsHEeF53iHnSNWjbdqNVHI 2026-04-11T08:21:02Z 8743 375 15 http://arxiv.org/abs/2510.09831v1 2025-10-10T20:06:50Z

Dielectric Laser Acceleration holds the promise of extremely high acceleration gradients in laser-driven miniaturized accelerator structures. However, sub-relativistic experimental demonstration has so far been limited by bunch charges well below 1 electron per bunch due to the low acceptance of these 'accelerator-on-a-chip' devices. Here, we propose a novel design for an injector tailor made for dielectric laser acceleration, based on just-above-threshold ionization of laser-cooled atoms. The key new feature is a an innovative magnet design that avoids apparent emittance growth by using the field-free regions of an axially polarised ring of permanent magnets as source point. We optimized this design using a multi-objective optimization approach that is also applicable to the development of other sub-relativistic, high-brightness/low-emittance electron beam setups (like setups for ultrafast electron diffraction). The expected injected bunch charge of our proposed injector is 90 (60) electrons for a dielectric laser acceleration gradient of 1 GV/m (100MV/m) operating at a 10 micron driver laser wavelength, increasing the expected bunch charge by about two orders of magnitude.

2025-10-10T20:06:50Z Ameya Patwardhan Simona Borrelli Bas van der Geer Jom Luiten Julius Huijts http://arxiv.org/abs/2510.09727v1 2025-10-10T09:46:30Z

High-Current Accelerator-driven Neutron Sources (HiCANS) are currently under development across Europe to address the shortage of medium-scale neutron sources, as many research nuclear reactors have been decommissioned over the past several years. At CEA-Saclay, a HiCANS has been developed utilizing the IPHI accelerator, which delivers a 3 MeV proton beam with a current of up to 100 mA, and the CEA-Saclay liquid lithium target named SATELIT. In 2024-2025, a successful experimental campaign was conducted, during which a 10 kW proton beam was directed at the liquid lithium target for nearly 100 h to generate neutrons via the 7Li(p,n)7Be nuclear reaction. Throughout the experimental campaign, a total deposited beam power of 840~kW.h was accumulated, including two continuous operational days exceeding 11 h each. A polyethylene moderator coupled with SATELIT enabled the extraction of a thermal neutron beam, with a flux measured at 1.4 m from the extraction point exceeding $10^6$ n.cm$^{-2}$.s$^{-1}$, which is sufficient for numerous neutron applications. The next step for the long-term operation of this facility involves developing strategies to mitigate the radiological concerns associated with the accumulation of 7Be within the system. Overall, this work demonstrates that such facilities can play a significant role in the future of medium-scale neutron sources in Europe.

2025-10-10T09:46:30Z 23 pages, 34 figures, 2 tables L. Thulliez N. Berton R. Boudouin N. Cavalière S. Cazaux T. Chaminade N. Chauvin D. Chirpaz J. -L. Courouau Q. Cridling P. Daniel-Thomas J. Darpentigny G. Debras G. Disset A. Drouart E. Dumonteil R. Duperrier R. Ferdinand E. Giner Demange J. -C. Guillard N. Jonqueres T. Lebrun D. Loiseau J. Mendes B. Mom F. Ott C. Péron J. Phocas Y. Reinert A. Roger Y. Sauce F. Senée M. Trocmé C. Veyssière D. Vurpillot X. Wohleber http://arxiv.org/abs/2510.09176v1 2025-10-10T09:19:22Z

As of July 2025, the SuperKEKB accelerator, which collides 7 GeV electrons with 4 GeV positrons to abundantly produce particles such as B mesons and tau leptons, holds the world record for the highest instantaneous luminosity. Continuous operation and upgrades are underway to achieve even higher luminosities. Maintaining a high instantaneous luminosity requires sustaining high beam currents in the storage rings, which in turn demands efficient beam injection from the injector. In particular, a high injection efficiency, defined as the ratio of the beam current successfully accumulated in the ring to the current delivered from the beam transport line, must be ensured. In the present study, we developed a tool to automate the injection tuning process using Bayesian optimization, a machine-learning-based technique, in order to improve the injection efficiency. During test operations conducted in November-December 2024, this tool successfully enhanced the injection efficiency by up to 32%.

2025-10-10T09:19:22Z 9 pages, 15 figures Shinnosuke Kato Gaku Mitsuka http://arxiv.org/abs/2510.09122v1 2025-10-10T08:23:20Z

The simulation of large-scale high-temperature superconducting (HTS) magnets is a computational challenge due to the multiple spatial scales involved, from the magnet to the detailed turn-to-turn geometry. To reduce the computational cost associated with finite-element (FE) simulations of insulated HTS coils, the simultaneous multi-scale homogeneous (SMSH) method can be considered. It combines a macroscopic-scale homogenized magnet model with multiple single-tape models and solves both scales monolithically. In this work, the SMSH method is reformulated using the $h$-$φ$ thin-shell (TS) approximation, where analyzed tapes are collapsed into thin surfaces, simplifying mesh generation. Moreover, the magnetic field is expressed as the gradient of the magnetic scalar potential outside the analyzed tapes. The discretized field is then described with nodal functions, further reducing the size of the FE problem compared to standard $h$ formulations. The proposed $h$-$φ$ SMSH-TS method is verified against state-of-the-art homogenization methods on a 2-D benchmark problem of stacks of HTS tapes. The results show good agreement in terms of AC losses, turn voltage and local current density, with a significant reduction in simulation time compared to reference models. All models are open-source.

2025-10-10T08:23:20Z 6 pages, 8 figures, presented at EUCAS2025 Louis Denis Benoît Vanderheyden Christophe Geuzaine http://arxiv.org/abs/2510.08285v1 2025-10-09T14:35:16Z

Superconducting radio frequency accelerating cavities made with different material layers, such as copper, Nb or Nb3Sn, are susceptible to thermoelectric effects due to differences in Seebeck coefficients between the metals. A temperature gradient across the surfaces can drive thermoelectric currents, which may impact the cavity performance. A layered Cu/Nb/Nb3Sn single cell cavity was tested with cryocoolers in 2022. Three heaters were mounted on the cavity surface at different locations and three single axis cryogenic fluxgate magnetometers were attached close to the cavity equator. A linear increase in the magnetic field was measured while increasing the heaters power. The cavity setup was analysed with COMSOL and the results showed a trend similar to that observed in the experiment. This contribution details the approach chosen for the simulation and some of the challenges encountered.

2025-10-09T14:35:16Z N. K. Raut N. Stilin J. Vennekate S. Wang G. Ciovati 10.18429/JACoW-NAPAC2025-THP070 http://arxiv.org/abs/2510.07603v1 2025-10-08T22:49:38Z

This volume contains contributions submitted to the 12th Low-Level RF Workshop which will be held in Newport News, Virginia, USA on October 12-16, 2025. This workshop continues the series of successful international workshops held in Newport News, USA (2001), Geneva, Switzerland (2005), Knoxville, USA (2007), Tsukuba, Japan (2009), Hamburg, Germany (2011), Tahoe City, USA (2013), Shanghai, China (2015), Barcelona, Spain (2017), Chicago, USA (2019), Brugg-Windisch, Switzerland (2022), and Gyeongju, South Korea (2023).

2025-10-08T22:49:38Z Dmitry Teytelman http://arxiv.org/abs/2510.05832v1 2025-10-07T11:56:13Z

Accurately determining resonance frequencies and quality factors (Q) is crucial in accelerator physics and radiofrequency engineering, as these factors have direct impacts on system design, operational stability, and research results. The methods currently employed to facilitate resonance analysis are mostly manual, requiring operators and physicists to estimate resonant parameters and examine scattering parameter (S-parameter) data from vector network analyzers (VNAs). The current techniques therefore become laborious, operator-dependent and challenging to replicate when applied to large datasets or across multiple analyses. Despite the importance of these tasks for high-volume research organizations such as CERN where S-parameter measurements are regularly taken for cavity and beam diagnostic research, the currently widespread measures are outdated. In order to automate the laborious resonance characterization process, this paper presents SPARTA (Spectral Parameter Analysis for Resonance Tracking and Assessment), a data analysis software framework based on Python. SPARTA has integrated data ingestion, preprocessing, resonance detection, quality factor estimation, visualization and persistent cloud storage into a reproducible and scalable workflow. SPARTA was developed with the scientific libraries NumPy, SciPy and scikit-rf for accurate and efficient numerical processing, Flask and Dash for interactive and lightweight visualization, and SQLite for easy database management. The three main contributions of this work are outlined as follows: Firstly, this paper presents a methodological framework for resonance detection and assessment based on established RF theory. The second section describes the system architecture and implementation of SPARTA, highlighting data handling, computation and visualization. Finally this paper discusses the results and advantages of automated analysis.

2025-10-07T11:56:13Z Kerem Semiz http://arxiv.org/abs/2510.09652v1 2025-10-06T19:44:57Z

This White Paper is exploring the potential of intense secondary muon, neutrino, and (hypothetical) light dark matter beams produced in interactions of high-intensity electron beams with beam dumps. Light dark matter searches with the approved Beam Dump eXperiment (BDX) are driving the realization of a new underground vault at Jefferson Lab that could be extended to a Beamdump Facility with minimal additional installations. The paper summarizes contributions and discussions from the International Workshop on Secondary Beams at Jefferson Lab (BDX & Beyond). Several possible muon physics applications and neutrino detector technologies for Jefferson Lab are highlighted. The potential of a secondary neutron beam will be addressed in a future edition.

2025-10-06T19:44:57Z 34 pages, 16 figures, refers to: International Workshop on Secondary Beams at Jefferson Lab (BDX & Beyond) Patrick Achenbach Andrei Afanasev Pawel Ambrozewicz Adi Ashkenazi Dipanwita Banerjee Marco Battaglieri Jay Benesch Mariangela Bondi Paul Brindza Alexandre Camsonne Eric M. Christy Ethan W. Cline Chris Cuevas Jens Dilling Luca Doria Stuart Fegan Marco Filippini Antonino Fulci Simona Giovannella Stefano Grazzi Heather Jackson Douglas Higinbotham Cynthia Keppel Vladimir Khachatryan Michael Kohl Hanjie Liu Zhen Liu Camillo Mariani Ralph Marinaro Kevin McFarland Claudio Montanari Vishvas Pandey Eduard Pozdeyev Jianwei Qiu Patrizia Rossi Riccardo Rossini Todd Satogata Glenn Schrader Adrian Signer Daniel Snowden-Ifft Marco Spreafico Diktys Stratakis Manjukrishna Suresh Holly Szumila Julia Tena Vidal Davide Terzania Charlie Velasquez Michael Wood Takayuki Yamazaki Yuhong Zhang http://arxiv.org/abs/2510.05100v1 2025-10-06T17:59:19Z

We present Rex and teaRex, C++17 libraries for efficient management of parton-level hard scattering event information and completely generic reweighting of such events, respectively. Rex is primarily an interfacing and I/O library for Les Houches Event format files and provides an internal event format designed with data parallelism in mind, and teaRex extends this format to provide full parton-level reweighting functionality with minimal code needing to be written by the end user. These libraries serve as the foundation for the MadtRex reweighting module for MadGraph5_aMC@NLO, extending the functionality of the CUDACPP plugin to allow for data-parallel model-generic leading order parameter reweighting on SIMD-enabled CPUs and SIMT GPUs, speeding up reweighting by more than two orders of magnitude compared to MadGraph5_aMC@NLO running on the exact same hardware while providing trivial scalability to larger and distributed systems.

2025-10-06T17:59:19Z 34 pages, 5 figures, 6 algorithms Stefan Roiser Robert Schöfbeck Zenny Wettersten http://arxiv.org/abs/2510.04415v1 2025-10-06T01:01:32Z

In recent electron-positron colliders designed and operated with very low emittance and high current, the energy density of the beam has increased significantly compared to earlier designs. Under these conditions, interactions between the beam and residual materials within the beam pipe exert considerable mutual influence. The residual materials are heated by the beam, leading to evaporation, charging, and possible fission, eventually resulting in a plasma state. Conversely, the beam undergoes emittance growth due to electromagnetic interactions with the resulting plasma. We investigate the effects of such dust-induced plasma on the beam through numerical simulations of these processes.

2025-10-06T01:01:32Z Submitted to Phys. Rev. Accel. and Beams Kazuhito Ohmi Hitoshi Fukuma Shinji Terui http://arxiv.org/abs/2510.03008v1 2025-10-03T13:52:35Z

This report describes major features of the most recent version of the MARS code as well as ongoing developments. The list of features includes various options for geometry models, a beam line builder based on MADX code, import of geometry models in GDML format, use of structured and unstructured meshes for scoring purposes, an update to the recent TENDL library for a number of projectiles at low energies (up to 250 MeV), and a recently implemented method to calculate spatial distribution of residual dose in a single computer run without an intermediate source. Examples of the code application to various projects are presented as well.

2025-10-03T13:52:35Z Igor Rakhno Fermi National Accelerator Laboratory Igor Tropint Fermi National Accelerator Laboratory Dali Georgobiani Fermi National Accelerator Laboratory Alajos Makovec Fermi National Accelerator Laboratory http://arxiv.org/abs/2509.17934v2 2025-10-03T10:56:41Z

We report on a Nb$_3$Sn-coated low-beta superconducting radio frequency (SRF) cavity intended for accelerating ions. We aim to apply the cavity in ATLAS, our Argonne National Laboratory user facility for nuclear physics studies with ion beams in the energy range of 5-20 MeV/u. The Nb$_3$Sn-coated cavity, a 145 MHz quarter-wave optimized for ions moving with velocity $β$=v/c=0.08 exhibits an order-of-magnitude reduction in radiofrequency (RF) losses into helium at $4.4\,\mathrm{K}$ compared to a superconducting niobium (Nb) cavity at the same frequency and temperature. Experimentally measured fields are among the highest to date for any Nb$_3$Sn-coated cavity, reaching a peak surface magnetic field of 105 mT. We also present a practical solution to the problem of cavity frequency tuning. Tuning by mechanical deformation has been a challenge with Nb3Sn due to its brittle nature, however, using a set of techniques tailored to the properties of thin-film Nb$_3$Sn on Nb, we can repeatably tune the cavity to the ATLAS master clock frequency after it is cooled, while maintaining the excellent performance characteristics. The same Nb$_3$Sn cavity technology offers broad benefits for future ion accelerators.

2025-09-22T15:54:44Z T. Petersen Argonne National Laboratory G. Eremeev Fermi National Accelerator Laboratory B. Tennis Fermi National Accelerator Laboratory N. Tagdulang Fermi National Accelerator Laboratory Y. Zhou Argonne National Laboratory M. Kedzie Argonne National Laboratory B. Guilfoyle Argonne National Laboratory Y. Xu Argonne National Laboratory S. V. Kutsaev RadiaBeam Systems R. Agustsson RadiaBeam Systems E. Spranza RadiaBeam Systems P. Davis Argonne National Laboratory G. P. Zinkann Argonne National Laboratory T. Reid Argonne National Laboratory S. Posen Fermi National Accelerator Laboratory M. P. Kelly Argonne National Laboratory http://arxiv.org/abs/2510.01819v2 2025-10-03T00:56:20Z

We report on the internal quality factor of a three-dimensional niobium quarter-wave coaxial cavity, with mid-temperature annealing, exhibiting $Q_{\rm int} \gtrsim 3\times10^9$ at the single-photon level below 20\,mK, which corresponds to an internal photon lifetime of $τ_{\rm int}\sim90\,\mathrm{ms}$. Moreover, $Q_{\rm int}$ of the mid-temperature annealed cavities remains almost unchanged even after several cooldown cycles and air exposure. These results suggest that stable low-loss niobium oxides might be formed by mid-temperature annealing on the surface of three-dimensional niobium cavity. This surface treatment could be applicable to the fabrication of 2D superconducting circuits and help improve the lifetime of Nb-based superconducting qubits.

2025-10-02T09:05:52Z Takaaki Takenaka Takayuki Kubo Imran Mahboob Kosuke Mizuno Hitoshi Inoue Takayuki Saeki Shiro Saito http://arxiv.org/abs/2510.02058v1 2025-10-02T14:26:39Z

Intrabeam scattering (IBS) is a fundamental effect that can limit the performance of high-brightness electron machines, yet it has so far been neglected in standard modelling of RF photoinjectors. Recent measurements at SwissFEL reveal that the slice energy spread (SES) in the injector is significantly underestimated by conventional tracking codes. In this work, we present a dedicated Monte Carlo simulation model that accurately predicts the IBS-induced SES growth in the photoinjector of an X-ray free-electron laser. The simulations are benchmarked against SES measurements at the SwissFEL as well as theoretically supported by a new analytical model. The results demonstrate that IBS-induced SES growth occurs throughout the injector, most prominently in the electron source, and must be taken into account when assessing photoinjector performance. We further show that while the 5D brightness is largely conserved, the 6D brightness undergoes notable degradation with propagation, underscoring the need to include IBS in the accurate design and optimization of photoinjectors.

2025-10-02T14:26:39Z Thomas Geoffrey Lucas Paolo Craievich Eduard Prat Sven Reiche Erion Gjonaj http://arxiv.org/abs/2510.02018v1 2025-10-02T13:45:29Z

The Future Circular Lepton Collider (FCC-ee) presents challenges for a longitudinal bunch profile monitor due to its wide range of bunch lengths and charge densities across its four distinct operational modes. For commissioning, monitoring the top-up injection, and energy calibration, the FCC-ee requires non-destructive, single-shot measurements of the bunch length and profile. This contribution proposes an in-vacuum electro-optical (EO) longitudinal bunch profile monitor for single-shot measurements at high repetition rates, building on the successful EO monitor at the Karlsruhe Research Accelerator (KARA) at the Karlsruhe Institute of Technology. A novel single-pass conceptual design for the in-vacuum holder of the electro-optical crystal is presented, utilizing prisms instead of a mirror to guide the laser through the crystal, which additionally allows measurements of the long bunches foreseen for FCC-ee operation mode at the Z-pole energy. A first prototype has been constructed and tested at the in-air test stand of the CERN Linear Electron Accelerator for Research (CLEAR). Results from the prototype tests are presented, demonstrating the proof of principle for the single-pass prism-based EO monitor design for FCC-ee.

2025-10-02T13:45:29Z 13 pages, 19 figures M. Reissig Karlsruhe Institute of Technology E. Bründermann Karlsruhe Institute of Technology S. Funkner Karlsruhe Institute of Technology L. L. Grimm Karlsruhe Institute of Technology B. Härer Karlsruhe Institute of Technology G. Niehues Karlsruhe Institute of Technology J. L. Steinmann Karlsruhe Institute of Technology A. -S. Müller Karlsruhe Institute of Technology R. Corsini CERN A. Gilardi CERN S. Mazzoni CERN C. Pakuza CERN A. Schloegelhofer CERN T. Lefevre CERN P. Korysko CERN University of Oxford