https://arxiv.org/api/FSnitZ/WLco7Ilv8RJQF5HmZSyA 2026-04-05T13:16:04Z 8734 345 15 http://arxiv.org/abs/2510.09889v2 The Coming of Age of the Ultracold Electron Source: A Review 2025-10-17T08:07:45Z The ultracold electron source is a unique approach to the generation of high-brightness electron beams. We give an overview of its development over the past 20 years, including the underlying physical principles, technical details and recent experiments, and give a flavor of the exciting prospects that the future may hold. 2025-10-10T22:11:05Z Julius Huijts Jom Luiten http://arxiv.org/abs/2510.14948v1 FAIR Commissioning - Towards First Science 2025-10-16T17:56:27Z The international Facility for Antiproton and Ion Research (FAIR) is under construction at the GSI Helmholtz Centre in Darmstadt. The first project stage includes the superconducting 100 Tm heavy-ion synchrotron SIS100, the Super Fragment Separator, and associated beam transport lines. Part of GSI's existing accelerator chain, comprising UNILAC and SIS18, will serve as injector. Installation work in the FAIR accelerator tunnels and supply buildings has been ongoing since early 2024. As progress continues, special attention is now on the start of commissioning, beginning in 2025 with the cryogenic plant. Commissioning of the transport line will follow at the end of 2025, and beam commissioning is scheduled for the second half of 2027. This paper outlines the current status of the project, commissioning strategy and timeline. 2025-10-16T17:56:27Z 4 pages, 5 figures. Published in: Proceedings of the 14th International Particle Accelerator Conference (IPAC2025), Taipei, Taiwan (JACoW, 2025). Licensed under CC BY 4.0 Proc. 14th Int. Particle Accelerator Conf. (IPAC2025), Taipei, Taiwan, 2025, THBN2, JACoW (2025), ISBN: 978-3-95450-248-6, ISSN: 2673-5490 S. Reimann GSI Helmholtz Centre, Darmstadt, Germany H. Albers GSI Helmholtz Centre, Darmstadt, Germany R. W. Assmann GSI Helmholtz Centre, Darmstadt, Germany Institute for Applied Physics P. Gasik GSI Helmholtz Centre, Darmstadt, Germany O. Geithner GSI Helmholtz Centre, Darmstadt, Germany F. Hagenbuck GSI Helmholtz Centre, Darmstadt, Germany A. Herlert GSI Helmholtz Centre, Darmstadt, Germany P. Hofmann GSI Helmholtz Centre, Darmstadt, Germany V. Kamerdzhiev GSI Helmholtz Centre, Darmstadt, Germany M. Kauschke GSI Helmholtz Centre, Darmstadt, Germany H. Kollmus GSI Helmholtz Centre, Darmstadt, Germany S. Pietri GSI Helmholtz Centre, Darmstadt, Germany N. Pyka GSI Helmholtz Centre, Darmstadt, Germany T. Radon GSI Helmholtz Centre, Darmstadt, Germany C. Schroeder GSI Helmholtz Centre, Darmstadt, Germany S. Schwarz GSI Helmholtz Centre, Darmstadt, Germany H. Simon GSI Helmholtz Centre, Darmstadt, Germany P. Spiller GSI Helmholtz Centre, Darmstadt, Germany K. Vogt GSI Helmholtz Centre, Darmstadt, Germany 10.18429/JACoW-IPAC2025-THBN2 http://arxiv.org/abs/2510.14835v1 Obvious and non-obvious aspects of digital Self-Excited-Loops for SRF cavity control 2025-10-16T16:11:00Z In 1978, Delayen showed how Self-Excited Loops (SEL) can be used to great advantage for controlling narrow-band SRF cavities. Its key capability is establishing closed-loop amplitude control early in the setup process, stabilizing Lorentz forces to allow cavity tuning and phase loop setup in a stable environment. As people around the world implement this basic idea with modern FPGA DSP technology, multiple variations and operational scenarios creep in that have both obvious and non-obvious ramifications for latency, feedback stability, and resiliency. This paper will review the key properties of a Delayen-style SEL when set up for open-loop, amplitude stabilized, and phase-stabilized modes. Then the original analog circuit will be compared and contrasted with the known variations of digital CORDIC-based implementations. 2025-10-16T16:11:00Z Poster presented at LLRF Workshop 2025 (LLRF2025, arXiv: 2510.07603) Larry Doolittle Shreeharshini Murthy Matei Guran Lennon Reyes Shrividhyaa Sankar Raman Philip Varghese http://arxiv.org/abs/2510.14485v1 Coherent radiation produced by microtron electron bunches 2025-10-16T09:29:51Z The theory of coherent transition radiation produced by a relativistic electron beam during its extraction from a microtron is established. Expressions for the beam form factor, spectral-angular and angular distribution of coherent transition radiation are obtained in explicit form. Estimates of microwave noise caused by coherent transition radiation are given. 2025-10-16T09:29:51Z 6 pages, 3 figures, XXXII Annual International Seminar Nonlinear Phenomena in Complex Systems S. V. Anishchenko P. V. Molchanov http://arxiv.org/abs/2510.14360v1 High-brightness Graphite Photocathodes 2025-10-16T06:56:58Z A robust and infrared laser-excited photocathode with high quantum efficiency, high brightness, and low cost, operating under a moderate vacuum, has long been sought by the accelerator and microscopy communities. This study investigates various types of graphite photocathodes, including bulk, sheet, and flake graphite, in the regime of thermionically assisted photoemission by an irradiating infrared laser. Our experiment reveals that, under space-charge-limited photoemission, the flake-graphite photocathode with a dense population of nano-graphene fins on its surface exhibits the highest quantum efficiency, which is 770 times greater than that of a copper photocathode irradiated by the same infrared laser at 1064 nm. With our theory considering both thermionic and multiphoton emissions, we determine that the flake graphite photocathode is 200 times brighter than a copper photocathode irradiated by an infrared laser and is as bright as a LaB6 field emitter. 2025-10-16T06:56:58Z Po-Hsun Wu Yu-Chieh Lo Yen-Chieh Huang http://arxiv.org/abs/2510.14061v1 Three-Dimensional Simulation of the University of Hawai`i FEL Oscillator: Superradiant Emission and Cavity Desynchronization 2025-10-15T20:02:29Z In this paper, we investigate superradiant emission in a free-electron laser (FEL) oscillator using a comprehensive three-dimensional time-dependent simulation tool. Using beam parameters from the University of Hawai`i (UH) at Mānoa FEL facility, our study shows that at nominal bunch length, the FEL radiation exhibits superradiant scaling in saturation. We then explore how cavity desynchronization enhances this regime by mitigating the laser lethargy effect in oscillators and improving overlap between the electron bunch and the radiation pulse, with peak power increased by more than a factor of five. Finally, we simulate a short-bunch operational mode with bunch length comparable to the slippage length, which accelerates saturation and further amplifies the FEL power. These findings highlight that the UH Mānoa FEL oscillator has the potential to achieve superradiant emission at its nominal operating mode, and that short-bunch operation offers further enhancement while requiring additional optimization. 2025-10-15T20:02:29Z Amir Weinberg Levi Fisher Siqi Li http://arxiv.org/abs/2510.14056v1 Beam-beam 2025-10-15T19:51:01Z The interaction of the two beams in a collider leads to a variety of effects that may limit the performance of the machine. This lecture introduces the basic aspects necessary to understand the design of modern colliders. 2025-10-15T19:51:01Z 15 pages, contribution to the CAS - CERN Accelerator School: Advanced Accelerator Physics, 10-22 November 2024, Spa, Belgium Xavier Buffat http://arxiv.org/abs/2506.23718v2 High brightness multi-MeV photon source driven by a petawatt-scale laser wakefield accelerator 2025-10-15T17:10:43Z We present an experimental demonstration of a bright multi-MeV gamma source driven by a petawatt laser. The source generates on average $(1.2\pm0.6)\times10^9$ photons above 1 MeV per pulse, exceeding those of previous all-optical sources by a hundred times, and reached a peak spectral brightness of $(3.9 \pm 1.5)\times 10^{22}$ photons/mm$^2$/mrad$^2$/s/0.1%BW at $ε_γ\approx11$ MeV. The source was produced by inverse Compton scattering of a laser wakefield accelerated GeV electron beam and its back-reflected driving laser pulse. Its performance is well described by a simple model of the laser and electron properties at the collision point that allows quantitative predictions and identifies clear strategies to further enhance radiation efficiency. Our results highlight the promise of this source for fundamental physics studies, as well as for applications of nuclear resonance fluorescence and nuclear transmutation. 2025-06-30T10:46:45Z 8 pages, 5 figures E. Gerstmayr B. Kettle M. J. V. Streeter L. Tudor O. J. Finlay L. E. Bradley R. Fitzgarrald T. Foster P. Gellersen A. E. Gunn O. Lawrence P. P. Rajeev B. K. Russell D. R. Symes C. D. Murphy A. G. R. Thomas C. P. Ridgers G. Sarri S. P. D. Mangles http://arxiv.org/abs/2510.13711v1 Comparative Evaluation of Xilinx RFSoC Platform for Low-Level RF Systems 2025-10-15T16:11:18Z The rapid advancement of Radio Frequency System-onChip (RFSoC) technology from Xilinx (AMD) has enabled the integration of high-speed data converters and programmable logic within a single package. RFSoC platforms are already widely adopted in telecommunications, radar, and satellite communications, where they promise reductions in system footprint and power consumption. However, their suitability for Low-Level RF (LLRF) control systems in accelerator environments - where stability requirements are critical - has not been quantitatively evaluated. This paper presents a comparative measurement-based assessment of RFSoC-based and conventional LLRF designs, focusing on signal fidelity, phase noise, latency, system complexity, and integration challenges. The advantages and challenges of adopting RFSoC-based direct conversion architectures are discussed, providing guidance for future LLRF system implementations. 2025-10-15T16:11:18Z Poster presented at LLRF Workshop 2025 (LLRF2025, arXiv: 2510.07603) Shreeharshini Dharanesh Murthy Victoria Moore Qiang Du Angel Jurado Michael Chin Keith Penney David Nett Benjamin Flugstad http://arxiv.org/abs/2510.13505v1 Attosecond Waveform Synthesis through Echo-enabled Harmonic Generation Free-electron Lasers 2025-10-15T12:55:32Z Attosecond pulse trains (APTs) are indispensable for probing electron dynamics at their intrinsic timescales. High harmonic generation (HHG) has long been a successful and widely used technique in producing extreme ultraviolet APTs. While in the soft X-ray regime, HHG suffers from low conversion efficiency and lacking flexibility in the waveform and spectrum control. Here in this study, based on the waveform synthesis of the echo-enabled harmonic generation (EEHG) free-electron laser (FEL), we propose a novel method that can generate soft X-ray APTs with high temporal and spectral tunability. EEHG scheme is well-known in forming phase-locked high harmonic bunching combs down to the soft X-ray regime. And We can facilitate successive FEL lasing in several different harmonic numbers and then perform the coherent waveform synthesis to generate soft X-ray APTs. Three-dimensional simulation results indicate that reproducible generation of coherent APTs in the soft X-ray regime with peak power of 3.5 GW and micropulse duration of 160 as can be achieved by five-harmonic synthesis. And the micropulse duration together with the spectral components of the APTs can be adjusted easily according to the programmable high harmonic bunching combs in the EEHG scheme. This method has the potential to establish a robust platform for attosecond sciences in the soft X-ray regime, which can enable unprecedented studies of electron dynamics in physical and chemical reactions, biological systems and quantum materials. 2025-10-15T12:55:32Z Lanpeng Ni Junhao Liu Zheng Qi Chao Feng http://arxiv.org/abs/2510.13502v1 A New Method for Aperture Masking Interferometric Imaging: Demonstration with the JWST 2025-10-15T12:51:57Z We present a new method for aperture masking interferometric (AMI) imaging at near-IR wavelengths using radio astronomical techniques. The method starts with derivation of interferometric visibilities from a Fourier transform of the interferograms. An iterative joint optimization process is then employed, using self-calibration of the interferometric element-based complex voltage gains (i.e. electric fields), and CLEAN deconvolution to obtain the source structure. We demonstrate the efficacy of the method using the NIRISS aperture masking interferometer on the James Webb Space Telescope (JWST) at 4.8~$μ$m and 3.8~$μ$m. Due to a number of effects (the large pixel size, charge migration, near-field optics), the method also requires an initial visibility-based amplitude normalization using observations of a well know point-source calibration star. We employ early science observations of the dusty binary Wolf-Rayet star WR137. Images with a dynamic range (peak/rms) of $\sim 240$ on the target, and $\sim 1000$ on the calibrator, are synthesized from a short integration. The self-calibration process determines the photon path-lengths through the optical system to each aperture using data on the target source itself, thereby representing an essentially 'real-time', precise wavefront error sensor. Four independent measures of the JWST mirror segment pistons (two wavelengths for two sources), agree to within 10~nm to 15~nm, comparable to the expected errors based on an analysis of closure phases on the calibrator star. Including a baseline-based phase correction improves the dynamic range of the final images by about 23\%. 2025-10-15T12:51:57Z 18 pages, 7 figures, 2 tables, submitted to Optical Engineering (SPIE) Opt. Eng. 65(8), 081808 (2026) Christopher Carilli NRAO Bojan Nikolic Cavendish Laura Torino ALBA-CELLS N. Thyagarajan CSIRO Ubaldo Iriso ALBA-CELLS 10.1117/1.OE.65.8.081808 http://arxiv.org/abs/2510.13421v1 Development of fault identification pipeline for SPIRAL2 LLRF data 2025-10-15T11:21:32Z SPIRAL2 is a state-of-the-art superconducting linear accelerator for heavy ions. The radiofrequency operation of the linac can be disrupted by anomalies that affect its reliability. This work leverages fast, multivariate time series post-mortem data from the Low-Level Radio Frequency (LLRF) systems to differentiate anomaly groups. However, interpreting these anomalies traditionally relies on expert analysis, with certain behaviours remaining obscure even to experienced observers. By adopting the Time2Feat pipeline, this study explores the interpretability of anomalies through feature selection, paving the way for real-time state observers. Clustering dashboards are presented, allowing the use of multiple clustering algorithms easily configurable and tools to help for visualizing results. A case study on distinguishing electronic quenches and false quench alarms in postmortem data is highlighted. Thereby, a fast and reliable K-Nearest Neighbours (KNN) classifier is proposed. 2025-10-15T11:21:32Z 22nd International Conference on RF Superconductivity (SRF2025) Charly Lassalle Patrick Bonnay Frédéric Bouly Marco Di Giacomo Adnan Ghribi http://arxiv.org/abs/2510.13346v1 Introduction to Optics Design 2025-10-15T09:32:23Z This lecture provides an overview of the principles and methodologies involved in linear optics design. It aims to introduce key concepts such as the matrix formalism, the symplecticity, the quantities that are preserved in the single particle evolution, e.g., the Courant-Snyder invariant. It also covers the concept of beam emittance and matching conditions for an ensemble of particles. The goal is to equip readers with the foundational tools needed for both theoretical understanding and practical application in linear optics and accelerator design. 2025-10-15T09:32:23Z 23 pages, contribution to the CAS - CERN Accelerator School: Advanced Accelerator Physics, 10-22 November 2024, Spa, Belgium. arXiv admin note: substantial text overlap with arXiv:2006.14340 Guido Sterbini http://arxiv.org/abs/2510.04768v3 Experimental Reconstruction of Source 4D Phase Space Without Prior Knowledge of Transfer Matrix 2025-10-14T19:39:25Z We experimentally demonstrate a method for reconstructing the transverse 4D phase space of an electron beam at the time of emission from downstream diagnostics of the 4D phase space. This method does not rely on detailed knowledge of the beamline transport, besides assuming that linearity and symplecticity are satisfied. We apply this method to measure the transverse position and momentum phase space of electrons emitted from a spatially-structured alkali-antimonide cathode. This method can uncover local correlations between emission location and momentum spread. We formulate this method analytically and investigate resolution limits. 2025-10-06T12:42:12Z Charles Zhang Elena Echeverria Abigail Flint William H Li Christopher M. Pierce Alice Galdi Chad Pennington Adam Bartnik Ivan Bazarov Jared Maxson http://arxiv.org/abs/2408.15845v2 Surrogate Models studies for laser-plasma accelerator electron source design through numerical optimisation 2025-10-14T18:04:37Z Designing a high-quality plasma injector electron source driven by a laser beam relies on numerical parametric studies using particle-in-cell codes. The common input parameters to explore are laser characteristics, plasma species and density profiles produced by computational fluid dynamic studies. We demonstrate the construction of surrogate models using machine learning techniques for a laser-plasma injector (LPI) based on more than $3000$ particle-in-cell simulations of laser wakefield acceleration performed for sparsely spaced input parameters published by Drobniak [Phys. Rev. Accel. Beams, 26, 091302, (2023)]. Surrogate models are relevant for LPI design and optimisation, as they are approximately $10^7$ times faster than PIC simulations. Their speed enables more efficient design studies by allowing extensive exploration of the input-output relationship without significant computational cost. We develop and compare the performance of three surrogate models, namely, multilayer perceptron (MLP), decision trees (DT) and Gaussian processes (GP). We show that using a simple and frugal MLP-based model trained on a reasonable-size random scan data set of 500 particles in cell simulations, we can predict beam parameters with a coefficient determination score $R^2=0.93$ . The best surrogate model is used to quickly find optimal working points and stability regions and get targeted electron beam energy, charge, energy spread and emittance using different methods, namely random search, Bayesian optimisation and multi-objective Bayesian optimisation. This simple approach can serve more global design study of an LPI in a start-to-end linear laser-driven accelerator.on beam energy, charge and energy spread using different methods, namely random search, Bayesian optimisation and multi-objective Bayesian optimisation 2024-08-28T15:07:12Z 28 pages, 14 figures G. Kane P. Drobniak S. Kazamias V. Kubytskyi M. Lenivenko B. Lucas J. Serhal K. Cassou A. Beck A. Specka F. Massimo