https://arxiv.org/api/eQKhi3Kmtk8AMNtnrUmqUGZ9VuI 2026-04-03T09:03:41Z 8734 330 15 http://arxiv.org/abs/2510.19786v1 2025-10-22T17:21:26Z

Dispersive shock waves (DSWs) are expanding nonlinear wave trains that arise when dispersion regularizes a steepening front, a phenomenon observed in fluids, plasmas, optics, and superfluids. Here we report the first experimental observation of DSWs in an intense electron beam, using the University of Maryland Electron Ring (UMER). A localized induction-cell perturbation produced a negative density pulse that evolved into a leading soliton-like peak followed by an expanding train of oscillations. The leading peak satisfied soliton scaling laws for width^2 vs inverse amplitude and velocity vs amplitude, while the total wave-train width increased linearly with time, consistent with Korteweg--de Vries (KdV) predictions. Successive peaks showed decreasing amplitude and velocity toward the trailing edge, in agreement with dispersive shock ordering. These results demonstrate that intense charged particle beams provide a new laboratory platform for studying dispersive hydrodynamics, extending nonlinear wave physics into the high-intensity beam regime.

2025-10-22T17:21:26Z H. McCright I. G. Abel I. Haber P. G. O'Shea B. L. Beaudoin http://arxiv.org/abs/2510.19519v1 2025-10-22T12:18:21Z

The study investigated transparent on-chip structures with a rectangular profile and triangular profiles with grating ridge base angles of $α= 36^\circ$, $30^\circ$, and $20^\circ$. Each triangular structure had both left- and right-handed profile orientations. For all variants, a modified version with a reflective gold coating was additionally considered. The maximum energy gains and accelerating gradients were determined and quantified for all structure classes: transparent and reflective (with both rectangular and triangular profiles).

2025-10-22T12:18:21Z 10 pages, 9 figures O. O. Svystunov I. V. Beznosenko A. V. Vasyliev R. R. Kniaziev G. V. Sotnikov http://arxiv.org/abs/2510.09113v2 2025-10-22T09:55:25Z

High magnetic fields can increase the occurrence of vacuum arcing, suggesting that both electric and magnetic fields can play a role in the vacuum arcing process. The mechanism of vacuum arcing in high magnetic fields is believed to involve both the cathode and the anode, with the cathode serving as the originator of field-emitting nanoprotrusions or tips, while the anode serves a secondary role. Significant heating of the anode surface can be achieved by magnetic focusing of the emitted electron beam, leading to increased heat flux due to greater current density. We simulated the emitted electron beam in different configurations of the electric and magnetic fields using the particle-in-cell (PIC) and finite element methods (FEM). The heating caused by the impacting electron beam was simulated for magnetic fields ranging from 0 T to 30 T. The directions of the electric and magnetic fields were found to play a major role in the focusing of the electron beam. We found that a sufficient temperature increase on the anode surface for evaporation can be reached at magnetic fields on the order of 10-30 T, suggesting the possibility of plasma initiation on the anode side.

2025-10-10T08:05:37Z 10 pages, 9 figures Roni Koitermaa Marzhan Toktaganova Andreas Kyritsakis Tauno Tiirats Alexej Grudiev Veronika Zadin Flyura Djurabekova http://arxiv.org/abs/2507.06074v2 2025-10-22T05:49:41Z

The bremsstrahlung x-ray emission induced by the impact of plasma electrons de-confined on the chamber wall of the ASTERICS electron cyclotron resonance ion source is investigated through a suite of two simulation codes. The electron high energy temperature distribution tail at the wall is found to be anisotropic and increases with Bmin. The electrons impinge the walls with broad angular distribution peaking at angles ranging between 5-25° with respect to the surface, which has consequences on the x-ray emission directionality and on the yield of electrons bouncing back toward the plasma, reaching up to 50%. The x-ray dose is mapped inside and around the ion source for Bmin = 0.8 T and an electron temperature artificially increased to 120 keV to dimension with margin the cave shielding. The dose without shielding reaches 100 $μ$Sv/h per kW of impacting electrons at 5 m. A set of internal and external shielding is presented to attenuate this dose and reduce it to less than 1 $μ$Sv/h per kW of electrons. A parametric electron distribution temperature study with Fluka indicates that the deposition of 1 W of heat in the superconducting cold mass per kW of plasma electrons, as reported experimentally, is obtained when the temperature is set to 380 keV. Such a result is compatible with previous experiments achieved on several ion sources showing an x-ray spectral temperature 3 to 4 times higher radially.

2025-07-08T15:15:39Z 7 pages, 9 figures T. Thuillier, A. Cernuschi, B. Cheymol; Simulation of surface x-ray emission from the ASTERICS ECR ion source. Rev. Sci. Instrum. 1 November 2025; 96 (11): 113503 Thomas Thuillier Andrea Cernuschi Benjamin Cheymol 10.1063/5.0289558 http://arxiv.org/abs/2502.15847v3 2025-10-21T21:14:07Z

In order to aid in luminosity maximization at the interaction point (IP), the collision location $s_{IP}$ must be equivalent to the location of the minimum value of the beta function $s^*$. Accurate optics measurements and $s^*$ movements are therefore essential to luminosity optimization. However, according to current Relativistic Heavy Ion Collider (RHIC) operations measurements, average horizontal beta beat measurements between operating IPs are around $20\%$ along with significant variation in $s^*$ measurements. A sensitivity matrix was shown to successfully move $s^*$ and the linear optics to their desired values using power supply currents at the 8 o'clock interaction region (IR8). A method to measure the linear optics using the one-turn map within IRs was explored and compared with other mature methods. An error analysis was also included for all optics measurements methods. Through these methods, a $10\%$ beat reduction was consistently achieved while moving $s^*_x$ as well significant improvement to variations in $s^*$ measurements. These methods used at the RHIC control room will be updated for future linear optics analysis and control.

2025-02-20T23:06:41Z 10 pages, 8 figures W. Fung Y. Hao X. Gu G. Robert-Demolaize http://arxiv.org/abs/2510.19076v1 2025-10-21T21:04:10Z

A development effort to improve the performance of superconducting radio-frequency half-wave resonators (SRF HWRs) is underway at the Facility for Rare Isotope Beams (FRIB), where 220 such resonators are in operation. Our goal was to achieve an intrinsic quality factor (Q0) of >= 2E10 at an accelerating gradient (Ea) of 12 MV/m. FRIB production resonators were prepared with buffered chemical polishing (BCP). First trials on electropolishing (EP) and post-EP low temperature baking (LTB) of FRIB HWRs allowed us to reach higher gradient (15 MV/m, limited by quench) with a higher quality factor at high gradient, but Q0 was still below our goal. Trapped magnetic flux during the Dewar test was found to be a source of Q0 reduction. Three strategies were used to reduce the trapped flux: (i) adding a local magnetic shield (LMGS) to supplement the ``global'' magnetic shield around the Dewar for reduction of the ambient magnetic field; (ii) performing a ``uniform cool-down'' (UC) to reduce the thermoelectric currents; and (iii) using a compensation coil to further reduce the ambient field with active field cancellation (AFC). The LMGS improved the Q0, but not enough to reach our goal. With UC and AFC, we exceeded our goal, reaching Q0 = 2.8E10 at Ea = 12 MV/m.

2025-10-21T21:04:10Z 20 pages, 17 figures, submitted to Phys Rev Accel Beams Phys. Rev. Accel. Beams 29, 033102 (Mar 2026) Yuting Wu Kenji Saito Alex Taylor Andrei Ganshyn Chris Compton Ethan Metzgar Kyle Elliott Laura Popielarski Sam Miller Sang-hoon Kim Spencer Combs Taro Konomi Ting Xu Walter Hartung Wei Chang Yoo-Lim Cheon 10.1103/nh3z-zwz3 http://arxiv.org/abs/2501.16654v2 2025-10-21T12:39:49Z

In general, optimizing chromaticity and transverse feedback parameters is important in suppressing beam instabilities for stable operation in high-intensity proton machines. Meanwhile, space charge effects impact the intrabunch motion of the proton bunch within a large chromaticity region in the machines, such as the main ring (MR) in the Japan Proton Accelerator Research Complex (J-PARC). To address this issue, the decoherence and recoherence of the transverse motion of the particles comprising the proton bunch are investigated. The analysis reveals that the space charge effects have a significant influence on the recoherence period through the chromaticity. Nevertheless, the relationship between the maximum frequency in the bunch and the chromaticity is not affected by the space charge effects. These findings are demonstrated with particle tracking simulations including the direct and indirect space charge effects, and the impedance source of the J-PARC MR. Furthermore, we illustrate the influence of the indirect space charge effect on particle motion by examining the excitation patterns of radial and head-tail modes.

2025-01-28T02:38:05Z 45 pages, 116 figures, This version (v2) is a major revision based on referee comments. To improve clarity and focus on the final results, several detailed derivations have been moved from the main text. These technical details remain available in version 1, as referenced in the manuscript. The scientific conclusions are unchanged; the restructuring is solely for readability Phys. Rev. Accel. Beams 28, 101003 (2025) Nobuyuki Yoshimura Takeshi Toyama Yoshihiro Shobuda 10.1103/yx9r-lhxq http://arxiv.org/abs/2510.15813v2 2025-10-20T20:19:02Z

The Self-Excited Loop (SEL) architecture, used in some continuous-wave (CW) superconducting linacs, relies on a positive feedback mechanism that requires carefully defined operating limits to ensure stable operation. These limits are typically derived from amplifier calibration, which characterizes the relationship between forward power and DAC drive. However, amplifier non-linearity often prevents a simple linear fit of this characteristic, introducing errors that can compromise stability. To address this, we present a modified calibration procedure that incorporates amplifier non-linearity into the SEL framework. The approach is validated with test data from a 32 kW solid-state amplifier (SSA) and a cavity emulator developed for the Fermilab PIP-II linac.

2025-10-17T16:50:33Z Talk presented at LLRF Workshop (LLRF2025, arXiv: 2510.07603) S. Raman Fermi National Accelerator Laboratory P. Varghese Fermi National Accelerator Laboratory L. Reyes Fermi National Accelerator Laboratory M. Guran Fermi National Accelerator Laboratory L. Doolittle Lawrence Berkeley National Laboratory S. Murthy Lawrence Berkeley National Laboratory Q. Du Lawrence Berkeley National Laboratory http://arxiv.org/abs/2510.17751v1 2025-10-20T17:06:30Z

The current Timing System at Fermilab has been around for 40 years and currently relies on 7 CAMAC crates and over 100 CAMAC cards to produce the Tevatron Clock (TCLK). Thanks to the ingenuity of those before us, this has allowed Fermilab the flexibility to change the timing and Events for its accelerator as beamlines and projects have changed over the years. With the advent of the Proton Improvement Plan-II (PIP-II), the Timing System at Fermilab is being reimagined into a single chassis with even greater flexibility and functionality for decades to come while tackling the ever-challenging task of maintaining backwards compatibility.

2025-10-20T17:06:30Z The 20th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS 2025) JACoW 2025 M. R. Austin Fermi National Accelerator Laboratory, Batavia, USA L. Carmichael Fermi National Accelerator Laboratory, Batavia, USA D. McArthur Fermi National Accelerator Laboratory, Batavia, USA E. Milton Fermi National Accelerator Laboratory, Batavia, USA A. Quilty Fermi National Accelerator Laboratory, Batavia, USA 10.18429/JACoW-ICALEPCS2025-WEBR004 http://arxiv.org/abs/2510.17708v1 2025-10-20T16:23:50Z

The PIP-II linac is an international collaboration project with in kind contributions of key subsystems from multiple countries including India (DAE). In the research and development phase of the project, the LLRF and resonance control systems were jointly developed by BARC and Fermilab and were delivered to Fermilab for testing and validation. Initial testing of the LLRF system was carried out using Fermilabs analog cavity emulator. Following successful emulator testing, the LLRF system was deployed at STC on a PIP-II 325 MHz SSR2 cavity. The cavity was operated in both SEL and GDR modes at a gradient of 5 MV/m. The results of the testing are presented here.

2025-10-20T16:23:50Z Poster presented at LLRF Workshop 2025 (LLRF2025, arXiv: 2510.07603) R. Nasery P. Varghese S. Raman M. Guran L. Reyes A. Agashe http://arxiv.org/abs/2510.13482v2 2025-10-20T05:17:33Z

Construction of the new fourth generation synchrotron radiation facility (SRF) "SKIF" near Novosibirsk is nearing completion. "SKIF" uniqueness is ultra-low 75 pm natural emittance at 400 mA beam current and 3 GeV beam energy. Collective effects (beam interaction with the vacuum chamber) are the main obstacles of achieving such emittance and beam current. To suppress these effects the storage ring will be equipped with a bunch-by-bunch feedback system. Important components of the feedback system are a stripline (fast) kicker and a beam position monitor. The paper describes design of the low-impedance stripline kicker for SRF "SKIF" storage ring, optimized for the manufacturing and for the uniformity of the imparted transverse kick. The kicker qualities such as S-parameters, imparted transverse momentum, transfer and beam impedances are presented. The chosen length of the stripline kicker allows its use as a beam position monitor.

2025-10-15T12:32:30Z 14 pages, 7 figures M. A. Baistrukov Budker Institute of Nuclear Physics SB RAS Synchrotron Radiation Facility - Siberian Circular Photon Source "SKIF" E. A. Bekhtenev Budker Institute of Nuclear Physics SB RAS A. A. Krasnov Budker Institute of Nuclear Physics SB RAS Synchrotron Radiation Facility - Siberian Circular Photon Source "SKIF" D. A. Nikiforov Budker Institute of Nuclear Physics SB RAS Synchrotron Radiation Facility - Siberian Circular Photon Source "SKIF" P. A. Piminov Budker Institute of Nuclear Physics SB RAS Synchrotron Radiation Facility - Siberian Circular Photon Source "SKIF" http://arxiv.org/abs/2510.16950v1 2025-10-19T18:04:00Z

Flying-focus wakefields, which can propagate with a tunable velocity along the optical axis, are promising solutions to electron dephasing in laser-wakefield accelerators. This is accomplished by a combination of spatio-temporal couplings and focusing with an axiparabola, a specialized optical element which produces a quasi-Bessel beam. If implemented, dephasingless acceleration would allow for a hitherto unachievable mixture of high acceleration gradients and long acceleration lengths. Here, we conduct an in-depth study of the structure and behavior of such a flying-focus wakefield, through a combination of direct imaging and simulations. We show the stability of the wakefield structures, explore how the wakefield evolves with changes of density, study the effects of ionization on the wakefield structure with a variety of gases, and analyze the importance of the focusing position. These insights shed light onto this novel wakefield regime and bring understanding that is important to the realization of dephasingless acceleration.

2025-10-19T18:04:00Z 5 figures 11 pages Aaron Liberman Anton Golovanov Sheroy Tata Anda-Maria Talposi Victor Malka http://arxiv.org/abs/2510.26805v1 2025-10-18T11:02:54Z

Particle accelerators play a pivotal role in advancing scientific research, yet optimizing beamline configurations to maximize particle transmission remains a labor-intensive task requiring expert intervention. In this work, we introduce RLABC (Reinforcement Learning for Accelerator Beamline Control), a Python-based library that reframes beamline optimization as a reinforcement learning (RL) problem. Leveraging the Elegant simulation framework, RLABC automates the creation of an RL environment from standard lattice and element input files, enabling sequential tuning of magnets to minimize particle losses. We define a comprehensive state representation capturing beam statistics, actions for adjusting magnet parameters, and a reward function focused on transmission efficiency. Employing the Deep Deterministic Policy Gradient (DDPG) algorithm, we demonstrate RLABC's efficacy on two beamlines, achieving transmission rates of 94% and 91%, comparable to expert manual optimizations. This approach bridges accelerator physics and machine learning, offering a versatile tool for physicists and RL researchers alike to streamline beamline tuning.

2025-10-18T11:02:54Z Anwar Ibrahim Alexey Petrenko Maxim Kaledin Ehab Suleiman Fedor Ratnikov Denis Derkach 10.1142/S0218301326410272 http://arxiv.org/abs/2509.07448v4 2025-10-18T07:40:50Z

SuperKEKB has achieved significantly higher specific luminosity than its predecessor KEKB, and it has proven a much more sustainable machine. It has successfully demonstrated several key design elements of FCC-ee. The design luminosity has not yet been reached, however. This observation is often (mistakenly) used to put into question the reliability of the FCC-ee design luminosity. In this note we review the accomplishments, challenges and obstacles of SuperKEKB, and compare these with the FCC-ee design.

2025-09-09T07:12:21Z Complementary Contribution to the European Strategy for Particle Physics Update 2025. In this fourth version, a few pictures and references were updated, replaced or added, including a proposal for a new straighter electron beam transport line Frank Zimmermann http://arxiv.org/abs/2510.15417v1 2025-10-17T08:11:18Z

Landau damping is a key mechanism to preserve the stability of particle beams under the influence of various collective forces that would otherwise spoil its quality through beam instabilities. We describe its root cause as well as ways to control it in order to design and operate particle accelerators.

2025-10-17T08:11:18Z 17 pages, contribution to the CAS - CERN Accelerator School: Advanced Accelerator Physics, 10-22 November 2024, Spa, Belgium Xavier Buffat