https://arxiv.org/api/VbqpBO72IjOIGflt4y7yqjij4/E 2026-04-01T16:29:02Z 8732 315 15 http://arxiv.org/abs/2510.09198v2 2025-10-31T05:34:01Z

The Super Tau-Charm Facility (STCF) is a new-generation $e^+e^-$ collider proposed in China, designed to operate in the center-of-mass (CoM) energy range of 2-7 GeV. To achieve the design luminosity exceeding 5*10^34 cm^-2s^-1 at the optimal CoM energy of 4 GeV, a large crossing angle combined with the crab-waist correction scheme is adopted. However, this scheme introduces strong nonlinearities in the interaction region (IR) due to the extremely low vertical beta function of beta_y* <=1 mm, which significantly limits dynamic and momentum apertures of the collider ring. This paper presents a comprehensive modular optics design that addresses these challenges through several key features: 1) local chromaticity correction up to third order to enhance momentum bandwidth; 2) exact -I transformation between chromatic sextupole pairs for nonlinear cancellation; 3) minimization of the dispersion invariant along the IR to improve local momentum acceptance; 4) optimized beta functions at crab sextupole locations to reduce strength requirements and associated nonlinearities. Resonance driving terms analysis confirms effective suppression of geometric aberrations while preserving the intended crab-waist effects. When integrated into the collider ring, the design achieves a Touschek lifetime exceeding 300 s at beam energy of 2 GeV, meeting STCF requirements. The impact of fringe fields from superconducting quadrupoles is mitigated using octupole correctors, and detector solenoid effects are fully suppressed via local anti-solenoid compensation. Furthermore, the defined machine-detector interface layout ensures minimal synchrotron radiation background at the IP beryllium chamber, while ultra-high vacuum conditions are required to suppress beam-gas background. This IR design represents the current optimal solution for STCF and has been incorporated into the project's conceptual design report.

2025-10-10T09:39:49Z Linhao Zhang Tao Liu Ye Zou Penghui Yang Demin Zhou Jiancong Bao Ze Yu Yuhan Jin Yihao Mo Sangya Li Tianlong He Qing Luo Jingyu Tang http://arxiv.org/abs/2510.25722v1 2025-10-29T17:29:19Z

Measurements of the spectral emission properties of an iron-doped Beta-Ga2O3(010) photocathode at 300K reveal the presence of ultracold electron emission with a 6meV mean transverse energy (MTE) in the 3.5-4.4eV photon energy range (282-354nm). This extreme sub-thermal photoemission signal is consistent with direct emission of electrons photoexcited from the Fe dopant states into the low effective mass and positive electron affinity primary conduction band, and it is superimposed on a stronger signal with a larger MTE associated with an (optical)phonon-mediated momentum resonant Franck-Condon (FC) emission process from a thermally populated and negative electron affinity upper conduction band. For photon energies above 4.5eV, a transition from a long to a short transport regime is forced by an absorption depth reduction to below 100nm and both MTE signals exhibit spectral trends consistent with phonon-mediated FC emission if the polaron formation self-energy is included in the initial photoexcited electron thermalization.

2025-10-29T17:29:19Z 19 pages, 3 figures Louis A. Angeloni Ir-Jene Shan J. H. Leach W. Andreas Schroeder http://arxiv.org/abs/2303.03411v3 2025-10-29T17:00:05Z

We study electromagnetic radiation reaction in curved space and the dynamics of radiating charged particles. The equation of motion for such particles is the DeWitt-Brehme equation, and it contains a particularly complicated, non-local, tail term. It has been claimed that the tail term can be neglected in certain magnetized black hole spacetimes, and that radiation reaction may then lead to energy extraction ("orbital widening") in the absence of an ergoregion. We show that such claims are incorrect, at least in the Newtonian limit: the tail term can never be neglected consistently in the relevant scenarios, and when it is included the reported energy extraction no longer occurs. Thus, previous results are called into question by our work.

2023-03-06T19:00:02Z 7 pages, 1 figure. v3: typo corrected in Eq. (A4), according to erratum published in PRD. None of the results were affected by this typo João S. Santos Vitor Cardoso José Natário 10.1103/PhysRevD.107.064046 http://arxiv.org/abs/2510.24567v1 2025-10-28T15:58:10Z

Plasma-based accelerators are beginning to employ relativistic beams with unprecedented charge and ultrashort durations. These dense driver beams can drive wakes even in high-density plasmas ($\gtrsim10^{19}$ cm$^{-3}$), where betatron radiation becomes increasingly important and begins to affect the dynamics of the accelerated beam. In this Letter, we show that betatron cooling leads to a strong, structuring of the phase space of the beam. This gives rise to bunched, ring-like structures with positive radial position and momentum gradients, \emph{i.e.}, population inversion of the amplitude of oscillation. We derive the characteristic timescales for this process analytically and confirm our predictions with multi-dimensional Particle-in-Cell simulations. The radiation-dominated regime of beam dynamics fundamentally alters the acceleration process and produces self-structured beams capable of triggering coherent betatron emission in ion channels.

2025-10-28T15:58:10Z 13 pages, 7 Figures Pablo J. Bilbao Thales Silva Luis O. Silva http://arxiv.org/abs/2509.20995v2 2025-10-27T23:06:58Z

The ion channel laser (ICL) is a plasma-based alternative to the free electron laser (FEL) that uses the electric field of a uniform-density ion channel rather than the magnetic field of an undulator to induce transverse oscillations of electrons in an ultrarelativistic bunch and thereby produce coherent radiation via a collective electromagnetic instability. The powerful focusing of the ion channel generally yields significantly higher gain parameters in the ICL as compared to the FEL. This permits lasing in extremely short distances using electron bunches with an energy spread as large as a few percent; a value readily achievable with current plasma-based accelerators. ICLs, however, impose stringent transverse phase space requirements on the electron bunch beyond what is required in FELs. In this work, we present a novel 3D theory of the planar off-axis configuration of the ICL that accounts for a number of effects including diffraction, transverse radiation profile, frequency and betatron phase detuning, and nonzero spread in energy and undulator parameter. We derive the ICL pendulum and field equations, which we use to write down the 3D Maxwell-Klimontovich equations. After linearizing, we obtain an integro-differential equation describing the $z$-evolution of the radiation field. The 3D ICL dispersion relation is obtained using a Van Kampen normal mode expansion. We numerically solve the $z$-evolution equation to compute radiation power growth rates and transverse radiation profiles over a range of different ICL parameters. We examine the gain reduction due to 3D effects, energy spread, and emittance. Electron bunch phase space and emittance requirements for lasing are derived. Finally, we make general observations about the performance and feasibility of the ICL and discuss future prospects.

2025-09-25T10:46:23Z Claire Hansel Agostino Marinelli Zhirong Huang Michael Litos http://arxiv.org/abs/2510.21036v2 2025-10-27T22:26:35Z

PIP-II is a superconducting linac that is in the initial acceleration chain for the Fermilab accelerator complex. The RF system consists of a warm front-end with an RFQ and buncher cavities along with 25 superconducting cryo-modules comprised of cavities with five different acceleration \(β\). The LLRF system for the linac has to provide field and resonance control for a total of 125 RF cavities. Various components of the LLRF system have been tested with and without beam at the PIP-II test stands. The LLRF system design is derived from the LCLS-II project with its self-excited loop architecture used in the majority of the cryo-modules. The PIP-II beam loading at 2 mA is much higher than the LCLS-II linac. The control system architecture is analyzed and evaluated for the operational limits of feedback gains and their ability to meet the project regulation requirements for cavity field amplitude and phase regulation.

2025-10-23T22:40:26Z Talk presented at LLRF Workshop 2025 (LLRF2025, arXiv: 2510.07603) P. Varghese S. Raman M. Guran L. Reyes L. Doolittle Q. Du S. Murthy http://arxiv.org/abs/2509.19794v2 2025-10-27T19:25:05Z

Control system middle layers act as a co-ordination and communication bridge between end users, including operators, system experts, scientists, and experimental users, and the low-level control system interface. This article describes a Python package -- Controls Abstraction Towards Acclerator Physics (CATAP) -- which aims to build on previous experience and provide a modern Python-based middle layer with explicit abstraction, YAML-based configuration, and procedural code generation. CATAP provides a structured and coherent interface to a control system, allowing researchers and operators to centralize higher-level control logic and device information. This greatly reduces the amount of code that a user must write to perform a task, and codifies system knowledge that is usually anecdotal. The CATAP design has been deployed at two accelerator facilities, and has been developed to produce a procedurally generated facility-specific middle layer package from configuration files to enable its wider dissemination across other machines.

2025-09-24T06:28:18Z M. King A. D. Brynes F. Jackson J. K. Jones N. Ziyan M. A. Johnson K. Baker D. J. Scott E. Yang T. Kabana C. Garnier S. Chowdhury N. Neveu R. Roussel http://arxiv.org/abs/2510.23562v1 2025-10-27T17:33:05Z

Fiber optic pulsed polarimetry is a LIDAR-like fiber sensing technique that uses a backscatter enhanced single mode backscatter-tailored optical fiber(BTOF) to measure the distributed B fields on all Magnetic Fusion Energy devices. The BTOF has a series of wavelength resonant reflection fiber Bragg gratings written uniformly along its length. The fiber's Verdet constant determines the strength of the Faraday effect which effectuates the measurement of local B along the fiber placed intimately next to or within a magnetized plasma volume. A robust measurement of the field distribution along the fiber is obtained at high rep rates, 5 MHz, high spatial resolution(1-10cm), high B field accuracy(<1%) and temporal response (ns). Multipathing in the BTOF produces 3rd order reflections that contaminate the LIDAR signal. Algorithms are given for calculating the level of contamination for uniform and flat reflection designs, in particular and any reflection series in general. The contamination is bracketed giving confidence in designing and implementing a BTOF. Applications include magnetic fusion devices, rail guns, high temperature superconducting magnets and magnetized target fusion research.

2025-10-27T17:33:05Z 13 pages and 14 figures Roger J Smith http://arxiv.org/abs/2506.12550v2 2025-10-23T23:49:02Z

The spectral emission characteristics of a proof-of-concept hybrid metallized diamond(001) photocathode are presented. The quantum efficiency (QE) is shown to be determined by the photo-injection efficiency across the ohmic contact at the back metallized face, whereas the mean transverse energy (MTE) of the photoemitted electrons is consistent with a (optical)phonon-assisted and momentum-resonant Franck-Condon mechanism [Phys. Rev. Applied 23, 054065 (2025)] following electron drift transport to the untreated diamond(001) front emission face. Emission is observed from both the lower and upper conduction bands of diamond with positive and negative electron affinity respectively. A potential route to the realization of a red-visible photocathode based on this concept with a sub-50meV MTE and a QE greater than 0.1% is discussed.

2025-06-14T15:48:21Z 15 pages, 5 figures, Accepted at Phys. Rev. Accelerators and Beams Louis A. Angeloni Ir-Jene Shan W. Andreas Schroeder http://arxiv.org/abs/2503.19657v2 2025-10-23T16:30:18Z

This paper develops a homogenized harmonic balance finite element method (HomHBFEM) to predict the dynamic behavior of magnets with fast excitation cycles, including eddy current and skin effects. A homogenization technique for laminated yokes avoids resolving the individual laminates and the skin depth in the finite element (FE) mesh. Instead, the yoke is represented by a bulk surrogate material with frequency-dependent parameters. The ferromagnetic saturation of the yoke at higher excitation currents is tackled by a harmonic balance method, which accounts for a coupled set of frequency components. Thereby, a computationally expensive time-stepping of the eddy-current field problem and a convolution of the homogenized yoke model are avoided. The HomHBFEM enables, for the first time, to conduct nonlinear simulations of fast corrector magnets, which are embedded in a fast orbit feedback system to counteract orbit disturbances over a broad frequency spectrum, and thus guarantee a stable light-source operation. The results show the impact of the nonlinearity on the phase lag and the field attenuation as well as the eddy current losses at frequencies up to 65 kHz. The numerical validation for a C-dipole magnet example shows that the HomHBFEM achieves a sufficient accuracy at an affordable computational effort, with simulation times of a few hours. In comparison, standard 3D transient FE simulations need to resolve the lamination thickness and the skin depth in space and the largest relevant frequency in time, which leads to a two to three orders of magnitude larger mesh and prohibitive computational effort, with simulation times of a few weeks on a contemporary computer server.

2025-03-25T13:44:46Z 18 pages, 27 figures, to be published in Physical Review Accelerators and Beams Physical Review Accelerators and Beams 28, 104601 (2025) Jan-Magnus Christmann Laura Anna Maria D'Angelo Herbert De Gersem Sven Pfeiffer Sajjad Hussain Mirza Matthias Thede Alexander Aloev Holger Schlarb 10.1103/9mnn-w7lj http://arxiv.org/abs/2510.20880v1 2025-10-23T16:17:07Z

This book begins with the basic accelerator knowledge required to understand the latter chapters. This is followed by topics from Fermilab accelerator specifics to general accelerator physics concepts. These chapters are accompanied by descriptions of the instrumentation and utilities required to operate a high-energy physics laboratory. Last, we discuss the role of operators in safety at the lab.

2025-10-23T16:17:07Z Dennis Barak Fermilab Beau F. Harrison Fermilab Adam Watts Fermilab http://arxiv.org/abs/2510.12960v2 2025-10-22T21:04:03Z

The phase averaging reference line system provides the RF phase reference, LO and clock signals to the LLRF and other accelerator sub-systems. The PIP-II linac has RF systems at three frequencies - 162.5 MHz, 325 MHz and 650 MHz. A temperature-stabilized, low-phase-noise oscillator is used as the master oscillator. Phase reference signals at 162.5 MHz, 325 MHz, and 650 MHz, along with LO signals at 182.5 MHz, 345 MHz, 670 MHz and LLRF clocks at 1320 MHz and 1300 MHz, are generated in temperature-controlled RF modules at each frequency section. A phase reference from each module travels to the next section, where it is doubled to produce required frequencies. The reference also travels alongside the accelerating cavities in the tunnel, allowing cavity probe and reference cables to temperature track and reduce measurement errors from temperature changes or phase drift.

2025-10-14T20:11:32Z Low Level Radio Frequency Workshop (LLRF Workshop 2025) A. Syed B. Vaughn P. Varghese E. Cullerton S. Stevenson D. Pieper D. Peterson J. Holzbauer R. Madrak A. Mosher D. Klepec http://arxiv.org/abs/2510.19786v1 2025-10-22T17:21:26Z

Dispersive shock waves (DSWs) are expanding nonlinear wave trains that arise when dispersion regularizes a steepening front, a phenomenon observed in fluids, plasmas, optics, and superfluids. Here we report the first experimental observation of DSWs in an intense electron beam, using the University of Maryland Electron Ring (UMER). A localized induction-cell perturbation produced a negative density pulse that evolved into a leading soliton-like peak followed by an expanding train of oscillations. The leading peak satisfied soliton scaling laws for width^2 vs inverse amplitude and velocity vs amplitude, while the total wave-train width increased linearly with time, consistent with Korteweg--de Vries (KdV) predictions. Successive peaks showed decreasing amplitude and velocity toward the trailing edge, in agreement with dispersive shock ordering. These results demonstrate that intense charged particle beams provide a new laboratory platform for studying dispersive hydrodynamics, extending nonlinear wave physics into the high-intensity beam regime.

2025-10-22T17:21:26Z H. McCright I. G. Abel I. Haber P. G. O'Shea B. L. Beaudoin http://arxiv.org/abs/2510.19519v1 2025-10-22T12:18:21Z

The study investigated transparent on-chip structures with a rectangular profile and triangular profiles with grating ridge base angles of $α= 36^\circ$, $30^\circ$, and $20^\circ$. Each triangular structure had both left- and right-handed profile orientations. For all variants, a modified version with a reflective gold coating was additionally considered. The maximum energy gains and accelerating gradients were determined and quantified for all structure classes: transparent and reflective (with both rectangular and triangular profiles).

2025-10-22T12:18:21Z 10 pages, 9 figures O. O. Svystunov I. V. Beznosenko A. V. Vasyliev R. R. Kniaziev G. V. Sotnikov http://arxiv.org/abs/2510.09113v2 2025-10-22T09:55:25Z

High magnetic fields can increase the occurrence of vacuum arcing, suggesting that both electric and magnetic fields can play a role in the vacuum arcing process. The mechanism of vacuum arcing in high magnetic fields is believed to involve both the cathode and the anode, with the cathode serving as the originator of field-emitting nanoprotrusions or tips, while the anode serves a secondary role. Significant heating of the anode surface can be achieved by magnetic focusing of the emitted electron beam, leading to increased heat flux due to greater current density. We simulated the emitted electron beam in different configurations of the electric and magnetic fields using the particle-in-cell (PIC) and finite element methods (FEM). The heating caused by the impacting electron beam was simulated for magnetic fields ranging from 0 T to 30 T. The directions of the electric and magnetic fields were found to play a major role in the focusing of the electron beam. We found that a sufficient temperature increase on the anode surface for evaporation can be reached at magnetic fields on the order of 10-30 T, suggesting the possibility of plasma initiation on the anode side.

2025-10-10T08:05:37Z 10 pages, 9 figures Roni Koitermaa Marzhan Toktaganova Andreas Kyritsakis Tauno Tiirats Alexej Grudiev Veronika Zadin Flyura Djurabekova