https://arxiv.org/api/lDXoU/vSJ0uY3DpNzXRsjrV2Or8 2026-06-21T23:07:12Z 8866 300 15 http://arxiv.org/abs/2512.03997v3 2026-01-29T06:40:51Z

The original article [1] can be logically divided into two parts: 1) the selection of main parameters for monochromatization and 2) interaction region optics design; the comment pertains only to the first part. The authors of [1] state that "The purpose of this paper is to report on the development of realistic IR optics designs for monochromatization at the FCC-ee". However, the proposed parameters do not seem very realistic and raise many questions; due to space limitations, we will only consider the most important ones.

2025-12-03T17:29:11Z Accepted for publication in Nucl. Instrum. Methods A. Comment on https://doi.org/10.1016/j.nima.2025.170268, arXiv:2411.04210 [physics.acc-ph] Nuclear Inst. and Methods in Physics Research, A 1086 (2026) 171316 Dmitry Shatilov 10.1016/j.nima.2026.171316 http://arxiv.org/abs/2512.16311v2 2026-01-27T08:45:54Z

Real-time, bunch-by-bunch monitoring of transverse position, longitudinal phase, and bunch length is crucial for beam control in diffraction-limited storage rings, where complex collective dynamics pose unprecedented diagnostic challenges. This study presents a neural network framework that simultaneously predicts these parameters directly from beam position monitor waveforms. The hybrid architecture integrates specialized Multi-Layer Perceptron (MLP), Convolutional Neural Network (CNN), and Long Short-Term Memory with Attention (LSTM-Attention) sub-networks, overcoming key limitations of traditional methods such as serial processing chains and batch-mode operation. Validated on experimental data from the Shanghai Synchrotron Radiation Facility and Hefei Light Source, the model achieves high prediction accuracy with a sub-millisecond latency of 0.042 ms per bunch. This performance demonstrates its potential as a core tool for real-time, multi-parameter diagnostics and active feedback in next-generation light sources.

2025-12-18T08:51:01Z 12 pages,11 figures,1 table Can Liu Xing Yang Youming Deng Qingqing Duan Yongbin Leng http://arxiv.org/abs/2509.03955v2 2026-01-27T05:54:32Z

Beam monitoring is crucial for particle accelerators to achieve high luminosity. We describe an upgrade of the LABM, a beam monitoring device utilizing observation of the beamstrahlung, radiation emitted by a beam of charged particles when it accelerates in the electromagnetic field of another beam of charged particles.

2025-09-04T07:32:11Z 15 pages, 21 figures, 1 table Dmitri Liventsev Giovanni Bonvicini Daniel Ricalde Herrmann Pedro L. M. Podesta-Lerma Makoto Tobiyama http://arxiv.org/abs/2601.18719v1 2026-01-26T17:42:03Z

Today, apart from some isolated R&D efforts, there are no gravitational wave (GW) experiments, yet which explore a large part of the vast frequency range above the LIGO/Virgo band. It is planned to establish an experiment at Deutsches Elektronen-Synchrotron (DESY) and at the Superconducting Quantum Materials and Systems (SQMS) Center at Fermi National Accelerator Laboratory (Fermilab) to search for high-frequency GWs in the frequency range of 10 kHz to 100 MHz. The basic idea is to use superconducting radiofrequency (SRF) cavities to detect tiny harmonic deformations induced by GWs which change the boundary conditions of the oscillating electromagnetic field. This paper summarizes the challenging environmental boundary requirements, and the R&D to operate a cavity using a low level RF (LLRF) system which pushes beyond state-of-the-art accuracy and resolutions and a seismic noise mitigated cryostat at 1.8 K. The focus of this paper is the warm and cold commissioning of a prototype cavity, built 20 years ago during the MAGO collaboration, and its first measurement in our collaborative research project.

2026-01-26T17:42:03Z 22nd Intl Conference on RF Superconductivity SRF 2025 M. Wenskat DESY University of Hamburg B. Giaccone Fermi National Accelerator Laboratory J. Branlard DESY V. Chouhan Fermi National Accelerator Laboratory C. Dokuyucu DESY L. Fischer University of Hamburg I. Gonin Fermi National Accelerator Laboratory A. Grassellino Fermi National Accelerator Laboratory W. Hillert University of Hamburg T. Khabiboulline Fermi National Accelerator Laboratory T. Krokotsch University of Hamburg F. Ludwig DESY G. Marconato University of Hamburg A. Melnychuk Fermi National Accelerator Laboratory G. Moortgat-Pick DESY University of Hamburg A. Muhs DESY A. Netepenko Fermi National Accelerator Laboratory Y. Orlov Fermi National Accelerator Laboratory M. Paulsen University of Hamburg K. Peters DESY L. Pfeiffer University of Hamburg S. Posen Fermi National Accelerator Laboratory O. Pronitchev Fermi National Accelerator Laboratory H. Schlarb DESY http://arxiv.org/abs/2601.18470v1 2026-01-26T13:19:01Z

The electron-positron Future Circular Collider (FCC-ee) being developed at CERN will generate intense beamstrahlung radiation, thus requiring photon absorbers downstream of the interaction points. This work presents the conceptual design of flowing-liquid-lead absorbers capable of dissipating around 370 kW of photon power, with a mean photon energy of 62 MeV. Two configurations are investigated: an inclined-flow geometry, developed to increase the photon interaction length to maximize absorption, and a compact upstream slope with an additional pool, in which a free-surface lead flow intercepts the power peak before a downstream pool dissipates the remaining load. Photon-matter interactions are modeled using Monte Carlo simulations in fluka, while conjugate heat-transfer and free-surface dynamics are analyzed through computational-fluid-dynamics simulations using ansys fluent. Design refinements are introduced based on the simulated thermal and hydraulic performance and to mitigate secondary effects such as photon backscattering. Both configurations demonstrate stable operation within the 300 kg/s flow limit and maintain liquid-lead and structural temperatures within the operational range of 450--500 $^{\circ}$C. The results establish circulating liquid lead as a feasible and thermally robust baseline technology for beamstrahlung absorption in FCC-ee.

2026-01-26T13:19:01Z Silvio Candido Rui Franqueira Ximenes Anton Lechner Alessandro Frasca Giuseppe Lerner Antonio Perillo Marcone Regis Seidenbinder Markus Widorski Louise Jorat Giacomo Lavezzari Davide Bozzato Gabriel Banks Marco Calviani Luca Tricarico Carlo Carrelli Mariano Tarantino http://arxiv.org/abs/2510.05274v2 2026-01-26T12:53:51Z

We investigate the impact of a non-negligible background temperature on relativistic plasma wake-fields generated when a beam of charged particles passes through a neutral plasma at rest. We focus on the blowout regime, wherein the plasma response is highly non-linear: plasma electrons are radially blown out and expelled away from the propagation axis of the beam particles, creating a region (bubble) of ions without electrons. Our study builds upon earlier investigations for non-linear models of plasma wakefields developed in the limit of zero background temperature (Lu et al., Phys. Rev. Lett. 96, 165002 (2006)). In the presence of a non-zero background temperature, we characterize the model and focus on its predictions for the bubble size and the electromagnetic fields inside the bubble. Model predictions are studied in combination with PIC simulations.

2025-10-06T18:42:15Z 12 pages, 8 figures D. Simeoni G. Parise A. R. Rossi A. Frazzitta F. Guglietta M. Sbragaglia http://arxiv.org/abs/2601.18293v1 2026-01-26T09:21:52Z

Non-destructive beam diagnostics are essential for low-energy medical cyclotrons, where even thin interceptive devices can severely degrade beam quality. We investigate an external fiber monitor (EFM) based on Ce-doped silica scintillating fibers that detects secondary radiation generated at existing beamline components of the 18 MeV Bern Medical Cyclotron beam transfer line (BTL). Three use cases were studied: (i) beam intensity monitoring around an electrically isolated, water-cooled beam dump; (ii) beam-loss monitoring around a 10 mm collimator under varying the beam focusing; and (iii) by steering a 6.5 mm $\times$ 6.5 mm beam spot on a beam dump. For case (i), the summed EFM signal exhibits a linear dependence on the current on target over nearly three orders of magnitude. In case (ii), a normalized EFM-based beam-loss proxy scales monotonically with an electrical loss proxy across several focusing settings. Furthermore, opposing-fiber signal ratios provide decoupled, monotonic sensitivity to horizontal and vertical beam displacements.

2026-01-26T09:21:52Z Alexander Gottstein Pierluigi Casolaro Gaia Dellepiane Lars Eggimann Eva Kasanda Isidre Mateu Samuel Usherovich Paola Scampoli Cornelia Hoehr Saverio Braccini 10.1088/1748-0221/21/03/P03036 http://arxiv.org/abs/2601.11989v2 2026-01-23T23:30:26Z

We discuss the relationship between the zero modes of electromagnetic fields in a cavity resonator and the cavity's topological characteristics. We show that the dimension of the electromagnetic zero-mode space coincides with the dimension of the corresponding homology group of the cavity. Moreover, we prove that the alternating sum of the dimensions of the electromagnetic zero-mode spaces is closely related to the Euler characteristic of the cavity boundary, and hence to the integral of the curvature.

2026-01-17T09:46:16Z 17 pages, 1 figure. Diagram corrected Osamu Kamigaito http://arxiv.org/abs/2601.17101v1 2026-01-23T15:36:32Z

After the recent success of acceleration molecular H$_2^+$ beam (from EBIS) in Booster to 1.0 GeV/u kinetic energy, we propose to carry out tests to accelerate H$_2^+$ beam in AGS (up to 12 GeV/u) and to RHIC (up to 100 GeV/u). In this Note, we address the main effects that might hamper H$_2^+$ beam acceleration, outline the impacts and benefits of high energy H$_2^+$ beam to BNL.

2026-01-23T15:36:32Z BNL Technical Report Xiaodong Jiang http://arxiv.org/abs/2601.10571v2 2026-01-23T14:55:29Z

In photo injectors, the transverse emittance is one of the key measures of beam quality as it defines the possible performance of the whole facility. As such it is important to measure the emittance in photo injectors and ensure the accuracy of these measurements. While there are many different methods of measuring the emittance, this paper focuses on quantifying the systematic errors present in transverse phase space measurements taken with slit-profiler methods, i.e. scanning a narrow slit over the beam and continually measuring the passed beamlets' divergence with a downstream profiler. The measurement errors include effects of the slit size, beamlet imaging, and residual space charge. While these effects are generally small, they can have significant impact on the measured emittance when the 2D phase space is strongly coupled. The systematic effects studied and corrections are demonstrated with simulations and measurements from the Photo Injector Test facility at DESY in Zeuthen (PITZ) using a slit-screen emittance scanner.

2026-01-15T16:37:09Z C. Richard M. Krasilnikov N. Aftab Z. Amirkhanyan D. Dmytriiev A. Hoffmann X. -K. Li Z. Lotfi F. Stephan G. Vashchenko S. Zeeshan http://arxiv.org/abs/2601.16760v1 2026-01-23T14:05:51Z

Radiofrequency (RF) systems play a critical role in particle accelerators by enabling the acceleration, manipulation, and diagnosis of charged particle beams. At the heart of many of these systems lies the RF cavity, whose effective design requires close collaboration among RF designers, beam physicists, and mechanical engineers. This chapter presents the fundamental principles of RF systems, with particular emphasis on RF cavities, and underscores the interdisciplinary effort involved in their development. The SwissFEL X-ray free-electron laser at the Paul Scherrer Institut serves as a key example to illustrate these concepts.

2026-01-23T14:05:51Z 10 pages, contribution to the CAS - CERN Accelerator School: Mechanical & Materials Engineering for Particle Accelerators and Detectors, 2-15 June 2024, Sint-Michielsgestel, Netherlands Thomas Geoffrey Lucas http://arxiv.org/abs/2601.13517v2 2026-01-21T18:02:30Z

Multi-turn charge-exchange injection is the primary method of creating high-intensity hadron beams in circular accelerators, and phase space painting during injection enables tailoring of the accumulated phase space distribution. A technique we call eigenpainting allows injection of particles into a single mode of a coupled ring, providing full four-dimensional control of the phase space distribution. Under ideal conditions, uniform eigenpainting generates a linear-force equilibrium distribution in the transverse plane, with zero volume in four-dimensional transverse phase space, even including space charge. We have implemented eigenpainting for the first time in the Spallation Neutron Source (SNS) Accumulator Ring. Injecting 8.8 $μ$C of 800 MeV beam, we obtain a final ratio of intrinsic transverse emittances of $\approx$2.4. We analyze the effect of space charge on the final distribution through comparison of the reconstructed phase space to particle-in-cell simulations.

2026-01-20T02:10:00Z 12 pages, 3 figures, accepted to Phys. Rev. Lett Nicholas J. Evans Austin Hoover Timofey Gorlov Vasiliy Morozov http://arxiv.org/abs/2509.18564v2 2026-01-21T17:05:03Z

Superconducting radiofrequency (SRF) cavities are the leading technology for highly efficient particle acceleration, and their performance can be significantly enhanced through the controlled introduction of interstitial impurities into bulk niobium. Nitrogen doping has demonstrated a substantial reduction in surface resistance, which improves the quality factor of the cavities. More recently, oxygen doping has emerged as a promising alternative, demonstrating comparable reductions in surface resistance. In this study, we combine cavity measurements on 1.3 GHz niobium SRF cavities subjected to a range of nitrogen- and oxygen-based treatments with material characterizations performed on cavity cutouts processed under identical conditions. This approach allows us to quantitatively assess the contribution of each impurity to the reduction of surface resistance. We find that nitrogen is ten times more effective than oxygen in reducing surface resistance at 16 MV/m. We also observe an additive effect of O and N impurities in reducing R$_\mathrm{T}$. We discuss these results in the context of field dependent nonequilibrium superconductivity, gap enhancement, and hydrogen trapping mechanisms.

2025-09-23T02:41:21Z 6 pages, 4 figures Hannah Hu Young-Kee Kim Daniel Bafia http://arxiv.org/abs/2601.14583v1 2026-01-21T01:45:25Z

In the case of a radio-frequency (RF) cavity with a mismatched input coupler, a direct calculation of the power dissipation in the cavity and the intrinsic quality factor from continuous-wave (CW) measurements may have uncertainty due to systematic errors. Formulae for an indirect calculation of these quantities are derived for the case of a cavity with two couplers of fixed coupling strength. In this approach, the signal from the pickup coupler is used to infer the amplitude of the "emitted wave" from the input coupler. A graphical method for self-consistency assessment is evaluated. The impact of frequency offsets is considered. Applications of these methods are presented, drawing on cold tests of superconducting cavities produced for the Facility for Rare Isotope Beams.

2026-01-21T01:45:25Z 19 pages, 13 figures, 2 tables Walter H. Hartung Wei Chang Sang-Hoon Kim Taro Konomi Ting Xu http://arxiv.org/abs/2506.07213v5 2026-01-20T14:39:34Z

Attosecond X-ray pulses are a critical tool for tracking ultrafast electron dynamics in condensed matter, molecular systems, and strongly correlated materials. Recent breakthroughs have pushed X-ray free electron lasers (XFELs) into the attosecond domain, significantly surpassing their previous femtosecond capabilities. Building on these advancements, this work investigates the potential of the Shanghai High Repetition Rate XFEL and Extreme Light Facility (SHINE), China's first continuous-wave (CW) XFEL, to generate intense attosecond X-ray pulses, thereby offering transformative capabilities for X-ray science. Through comprehensive start-to-end simulations, we show that SHINE is capable of producing hard X-ray pulses with peak powers reaching the terawatt-scale and average pulse durations of approximately 300 as. This is achieved using a self-chirping scheme within the existing machine configuration, requiring no additional hardware. Our findings demonstrate that CW XFELs can generate intense attosecond X-ray pulses at megahertz repetition rates, opening new opportunities for real-time studies of electronic dynamics in complex systems.

2025-06-08T16:32:35Z Bingyang Yan Chenzhi Xu Si Chen Duan Gu Ye Chen Jiawei Yan Haixiao Deng