https://arxiv.org/api/DvUrIJAh+6eRpMfP0Vd/aRq5uH4 2026-06-21T22:05:25Z 8866 285 15 http://arxiv.org/abs/2602.05782v1 2026-02-05T15:39:17Z

First, we describe vacuum brazing and vacuum soldering. Then, we demonstrate how vacuum assists in reducing specific metal oxides, significantly enhancing the wetting of the braze material. Examples of metal-to-metal brazing and soldering are provided. The brazing of large accelerating cavities, specifically Radio Frequency Quadrupoles (RFQ), is then explained in more detail to present a comprehensive procedure tailored for high-precision, large-scale assemblies. Finally, we discuss the process of brazing ceramics using both techniques: with metallisation and with active brazing alloy.

2026-02-05T15:39:17Z 14 pages, contribution to the CAS - CERN Accelerator School: Mechanical & Materials Engineering for Particle Accelerators and Detectors, 2-15 June 2024, Sint-Michielsgestel, Netherlands Serge Mathot http://arxiv.org/abs/2512.20356v2 2026-02-05T10:43:15Z

Inverse Compton scattering (ICS) is a promising method for generating coherent and tunable x-rays in a compact setup. In this paper, we present a theoretical framework describing the output of an ICS x-ray source for arbitrary interaction angles between pulsed electron and laser beams. This allows for analytic optimization of the x-ray beam properties by varying the parameters defining the geometry. In general, different x-ray applications require optimization of different x-ray beam properties, such as energy spread for x-ray spectroscopy and angular spread for x-ray scattering measurements. In this paper, we restrict ourselves to optimization of the x-ray brilliance, which is a comprehensive figure of merit for x-ray beam quality. We investigate two specific ICS interaction geometries in particular: head-on scattering of a laser beam off an electron beam; and scattering of a laser beam off an electron beam in a co-propagating geometry, interacting under a grazing angle. For head-on scattering we show that a tightly focused, cylindrically symmetric laser pulse, which balances laser intensity and interaction time, optimizes the x-ray brilliance. For a co-propagating, grazing angle geometry, an elliptical focus of the laser pulse is required to mitigate the effect of a reduced interaction time. We find that the latter geometry is especially useful for soft x-ray generation.

2025-12-23T13:37:11Z C. W. Sweers O. J. Luiten http://arxiv.org/abs/2602.05530v1 2026-02-05T10:42:58Z

In this lecture we discuss the intensity limitations in hadron LINACs. First, we will detail what are the two main meanings of intensity limitations as they differ substantially between high power LINACs and high brightness LINACs. Then we will illustrate in detail the building blocks of hadron linacs focusing on the beam dynamics. We will conclude with few examples of intensity limitations and their mitigations.

2026-02-05T10:42:58Z 16 pages, contribution to the CAS - CERN Accelerator School: Intensity Limitations in Hadron Beams, 15 - 27 June 2025, Borovets, Bulgaria Alessandra Lombardi http://arxiv.org/abs/2602.05518v1 2026-02-05T10:23:36Z

A proof of principle experiment of Three-dimensional spiral beam injection scheme has been carried out. This injection scheme requires a strongly x-y coupled beam to meet magnetic field distribution through solenoid magnet fringe field. In this paper, we introduce outline of experimental setup, results of x-y coupling adjustment with DC electron beam of 80 keV. The results of this experiment will be evaluated and improvements for actual operation will be discussed.

2026-02-05T10:23:36Z 25 pages, 34 figures. Submitted to Phys. Rev. Accel. Beams Hiromi Iinuma Ryota Matsushita Muhammad Abdul Rehman Hisayoshi Nakayama Satoshi Ohsawa Kazuro Furukawa http://arxiv.org/abs/2503.20904v4 2026-02-04T12:24:03Z

We report on experimental evidence of the generation of directional muons from a laser-wakefield accelerator driven by a PW-class laser. The muons were generated following the interaction of a GeV-scale high-charge electron beam with a 2cm-thick Pb target and were detected using a Timepix3 detector placed behind a suitable shielding configuration. Data analysis indicates a $(99.1\pm0.5)$% confidence of muon detection over noise, in excellent agreement with numerical modelling. Extrapolation of the experimental setup to higher electron energies and charges suggests the potential to guide and separate from noise approximately $10^4$ muons/s onto cm$^2$-scale areas for applications using a 10 Hz PW laser. These results demonstrate the possibility of generating and transporting directional muon beams using high-power lasers and establish a foundation for the systematic application of laser-driven high-energy muon beams.

2025-03-26T18:19:07Z 18 pages, 8 figures L. Calvin E. Gerstmayr C. Arran L. Tudor T. Foster K. Fleck B. Bergmann D. Doria B. Kettle H. Maguire V. Malka P. Manek S. P. D. Mangles P. McKenna R. E. Mihai S. Popa C. Ridgers J. Sarma P. Smolyanskiy R. Wilson R. M. Deas G. Sarri http://arxiv.org/abs/2508.02894v2 2026-02-03T20:40:13Z

We deposited Nb3Sn film on the inner surface of a 2.6 GHz Nb superconducting radiofrequency (SRF) cavity by co-sputtering using a composite of Nb and Sn tube targets in a DC cylindrical magnetron sputtering system, followed by thermal annealing of the coated cavity. An aluminum mockup cavity, replicating a 2.6 GHz Nb SRF cavity geometry, was utilized to optimize deposition parameters, resulting in co-sputtered Nb-Sn films with Sn content of 32 - 42 at. % on the beam tubes and equator positions. Several annealing conditions were investigated to improve the surface homogeneity of the Nb3Sn film. The best co-sputtered Nb-Sn film was achieved after annealing at 600 C for 6 h, followed by annealing at 950 C for 1 h. The best process was applied to a Nb cavity, which was RF tested in a cryogenic dewar. RF testing of the Nb3Sn-coated cavity demonstrated a superconducting transition temperature (Tc) close to the highest reported, at 17.78 K. The Nb3Sn cavity underwent a light Sn recoating process, followed by additional RF testing, resulting in enhancement of the RF performance, primarily due to improved surface homogeneity of the Nb3Sn coating.

2025-08-04T20:46:17Z Md Sharifuzzaman Shakel Grigory V. Eremeev Anne-Marie Valente-Feliciano Uttar Pudasaini Hani E. Elsayed-Ali http://arxiv.org/abs/2602.03754v1 2026-02-03T17:17:41Z

Plasma wakefield acceleration is a groundbreaking technique for accelerating particles, capable of sustaining gigavolt-per-meter accelerating fields. Understanding the physical mechanisms governing the recovery of plasma accelerating properties over time is essential for successfully achieving high-repetition-rate plasma acceleration, a key requirement for applicability in both research and commercial settings. In this paper, we present numerical simulations of the early-stage plasma evolution based on the parameters of the SPARC_LAB hydrogen plasma recovery time experiment (Pompili et al., Comm. Phys. 7, 241 (2024)), employing spatially resolved Particle-in-Cell and fluid models. The experiment reports on a non-monotonic dependence of the plasma recovery time on the initial plasma density, an effect for which ion motion has been invoked as a contributing factor. The simulations presented here provide further insight into the role of ion dynamics in shaping this behavior. Furthermore, comparing Particle-in-Cell and fluid approaches allows us to assess the quality of fluid models for describing this class of plasma dynamics.

2026-02-03T17:17:41Z G. Parise A. Cianchi M. Galletti F. Guglietta R. Pompili A. R. Rossi M. Sbragaglia D. Simeoni http://arxiv.org/abs/2602.03270v1 2026-02-03T08:56:15Z

This paper recalls the principles of the finite-element methods (FEM) theory and declines its application in the EN-MME group, for the numerical modelling and study of particle accelerator equipment. Implicit and explicit methods are compared, and practical examples of their use are given.

2026-02-03T08:56:15Z 15 pages, contribution to the CAS - CERN Accelerator School: Mechanical & Materials Engineering for Particle Accelerators and Detectors, 2-15 June 2024, Sint-Michielsgestel, Netherlands Federico Carra Giuditta Coladonato Audrey Piccini Joanna Sylwia Swieszek Nikolina Vejnovic http://arxiv.org/abs/2602.02867v1 2026-02-02T22:17:58Z

Exquisite control of electron beam energy is required for many electron spectroscopy and imaging applications. For both continuous and pulsed beams, the beam energy spread is fundamentally limited by the electron source, and is typically a sizable fraction of an electron-volt. In this paper, we present a means to reduce electron beam energy spread after emission to the level of a few 10s of meV rms using femtosecond photoemission and an interaction with laser-derived single- to few-cycle terahertz (THz) radiation. We show analytically and in particle tracking simulations that this interaction can remove energy spread stored in both the transverse and longitudinal degrees of freedom. We analytically formulate the limit of energy spread that this technique can achieve, and map the non-ideal affects arising at high frequencies. The interaction is mediated by the beam's passage through a mirror which is reflective to terahertz radiation but allows transmission of the majority of the electron beam (e.g. a wire mesh). This method then only requires beam current losses of a few tens of percent, far smaller than what is achieved in prism and slit-based electron monochromators.

2026-02-02T22:17:58Z Cecilia Abbamonte Adam Bartnik Jared Maxson 10.1103/15mt-nnfc http://arxiv.org/abs/2510.24618v2 2026-02-02T14:13:53Z

In this paper, we present the Distributed Inter-Strand Coupling Current (DISCC) model. It is a finite element (FE) model based on a homogenization approach enabling efficient and accurate simulation of the transient magnetic response of superconducting Rutherford cables without explicitly representing individual strands. The DISCC model reproduces the inter-strand coupling current dynamics via a novel mixed FE formulation, and can be combined with the Reduced Order Hysteretic Magnetization (ROHM) and Flux (ROHF) models in order to reproduce the effects of internal strand dynamics: hysteresis, eddy, and inter-filament coupling currents, as well as ohmic effects. The DISCC model offers a massive reduction of the computational time compared to fully detailed FE models and still accounts for all types of loss and magnetization contributions. As a result, Rutherford cables homogenized with the DISCC model can be directly included in FE models of magnet cross-sections for efficient electro-magneto-thermal simulations of their transient response. We present two possible FE formulations for the implementation of the DISCC model, a first one based on the h-phi-formulation, and a second one based on the h-phi-a-formulation, which is well suited for an efficient treatment of the ferromagnetic regions in magnet cross-sections.

2025-10-28T16:45:23Z 24 pages, 30 figures, revised version after peer-reviewing Julien Dular Alexander Glock Arjan Verweij Mariusz Wozniak http://arxiv.org/abs/2602.01972v1 2026-02-02T11:25:46Z

Phase-3 testing of the pHB650 cryomodule at the PIP-II Injector Test Facility was conducted to evaluate the effectiveness of heat load mitigations performed after earlier phases of testing and to continue pinpointing any sources of unexpectedly high heat loads.. The programme measured HTTS, LTTS, and 2 K isothermal/non-isothermal loads under "standard", "linac", and "simulated dynamic" operating modes, recording data both inside the cryomodule and across the bayonet can circuits. Thermal-acoustic oscillations were eliminated by replacing the original G10 cooldown-valve stem with a stainless-steel stem fitted with wipers. A newly developed Python script automated acquisition of ACNET data, performed real-time heat-load calculations, and generated plots and tables that were posted to the electronic logbook within minutes, vastly reducing manual effort and accelerating feedback between SRF and cryogenics teams. Analysis showed that JT heat-exchanger effectiveness and temperature stratification in the two-phase and relief piping strongly influence the observed loads and helped isolate sources of excess heat. The campaign demonstrates that rigorous pre-test planning, real-time diagnostics, and automated reporting can improve both accuracy and efficiency, providing a template for future PIP-II cryomodule tests and for implementing targeted heat-load mitigations.

2026-02-02T11:25:46Z The 26th joint Cryogenic Engineering Conference (CEC) and International Cryogenic Materials Conference (ICMC) D. Porwisiak Fermi National Accelerator Laboratory Wroclaw University of Science and Technology M. J. White Fermi National Accelerator Laboratory V. Roger Fermi National Accelerator Laboratory J. Bernardini Fermi National Accelerator Laboratory B. J. Hansen Fermi National Accelerator Laboratory J. P. Holzbauer Fermi National Accelerator Laboratory J. Makara Fermi National Accelerator Laboratory J. Ozelis Fermi National Accelerator Laboratory D. Passarelli Fermi National Accelerator Laboratory S. Yoon Fermi National Accelerator Laboratory J. Subedi Fermi National Accelerator Laboratory S. Ranpariya Fermi National Accelerator Laboratory V. Patel Fermi National Accelerator Laboratory J. Dong Fermi National Accelerator Laboratory http://arxiv.org/abs/2602.00501v1 2026-01-31T04:05:04Z

The KEK Accelerator Test Facility (ATF) is a dedicated testbed for nanobeam technologies in support of the International Linear Collider (ILC). Stable pulsed operation requires synchronization of the facility timing system with the Low-Level RF (LLRF) system. The timing system distributes trigger and gate signals to key subsystems, including the DAQ, klystrons, laser systems, pulsed kicker magnets, and interlocks. The LLRF system provides phase-coherent RF references and facility-wide clock distribution for synchronization. Achieving ~100 fs-level synchronization depends critically on the phase-noise power spectral density (PN-PSD) of the distributed clock signals and on preserving this performance throughout the distribution network. We present facility-wide measurements of the KEK ATF LLRF clock PN-PSD and discuss the resulting synchronization floor imposed by the stability of the ATF Linac and Damping Ring signal generators.

2026-01-31T04:05:04Z 7 pages, 3 pictures. This manuscript will be submitted to the LCWS2025 conference proceedings Konstantin Popov Alexander Aryshev Hiroshi Kaji Toshiyuki Okugi http://arxiv.org/abs/2601.21809v1 2026-01-29T14:53:13Z

A new approach to incorporating coupling elements into a generalized coupled mode theory is presented. The simplest model of coupling of a structured waveguide with an external RF power source and load through loops and transmission lines was used. Even such a simple model significantly complicated the system of coupled equations. It turned into a coupled integro-differential system of the Barbashin type with degenerate kernels. Since the integral kernels are degenerate, this system is reduced to three independent systems of differential equations. Instead of solving a system of coupled integro-differential equations, we need to find solutions to three systems of ordinary differential equations. Two systems describe the distribution of the field excited by one loop and the specified value of the excitation current in it. In the first system the loop is located at the section's input, and in the second, at the section's output. The third system does not depend on the loop parameters at all. It describes the distribution of the field excited by an electron beam in a section without loops. Based on the developed analytical model, the computer code was developed for matching the loop couplers for the uniform accelerating sections of X-band. The calculation results were used to simulate the non-uniform section. Without additional matching, we obtained an input reflection coefficient of 8E-3.

2026-01-29T14:53:13Z 12 pages, 17 figures M. I. Ayzatsky http://arxiv.org/abs/2503.11285v4 2026-01-29T08:53:38Z

Radio frequency knock out resonant slow extraction is a standard method for extracting stored particle beams from synchrotrons by transverse excitation. Excitation signals comprising many betatron sidebands have shown to reduce intensity fluctuations of the extracted beam spill and are used at several facilities. In this contribution, the effect of individual sidebands at different harmonics on the spill quality is systematically studied using efficient noise excitation signals fully covering the respective sidebands. Particle tracking simulations show a clear correlation between the chosen excitation frequency and the spill quality. This relation is attributed to the spectrum of particle motion shortly before their extraction, and an empiric relation between the spectrum, the excitation frequency, and the resulting spill quality is given. Experiments show an additional reduction of pile-up when using higher excitation frequencies. These insights have implications for an optimal design of excitation waveforms and hardware for Knock Out extraction systems.

2025-03-14T10:46:10Z Philipp Niedermayer Rahul Singh Eike Feldmeier Christian Schömers Marcel Hun 10.1103/gndl-srhs http://arxiv.org/abs/2601.21385v1 2026-01-29T08:20:52Z

We provide a theoretical framework to describe the dynamics of a free-electron beam interacting with quantized bound systems in arbitrary electromagnetic environments. This expands the quantum optics toolbox to incorporate free-electron beams for applications in highly tunable quantum control, imaging, and spectroscopy at the nanoscale. The framework recovers previously studied results and shows that electromagnetic environments can amplify the intrinsically weak coupling between a free-electron and a bound electron to reach previously inaccessible interaction regimes. We leverage this enhanced coupling for experimentally feasible protocols in coherent qubit control and towards the nondestructive readout and projective control of the electron beam's quantum-number statistics. Our framework is broadly applicable to microwave-frequency qubits, optical nanophotonics, cavity quantum electrodynamics, and emerging platforms at the interface of electron microscopy and quantum information.

2026-01-29T08:20:52Z 8 pages, 3 figures Jakob M. Grzesik Aviv Karnieli Charles Roques-Carmes Dylan S. Black Trung Kiên Lê Olav Solgaard Shanhui Fan Jelena Vučković