https://arxiv.org/api/X4zJJ09kEdHFG5AifrZP43J4ufY 2026-04-01T11:31:07Z 8732 270 15 http://arxiv.org/abs/2511.17850v1 2025-11-22T00:32:44Z

We demonstrate that multipoint Bayesian algorithm execution can overcome fundamental computational challenges in storage ring design optimization. Dynamic (DA) and momentum (MA) optimization is a multipoint, multiobjective design task for storage rings, ultimately informing the flux of x-ray sources and luminosity of colliders. Current state-of-art black-box optimization methods require extensive particle-tracking simulations for each trial configuration; the high computational cost restricts the extent of the search to $\sim 10^3$ configurations, and therefore limits the quality of the final design. We remove this bottleneck using multipointBAX, which selects, simulates, and models each trial configuration at the single particle level. We demonstrate our approach on a novel design for a fourth-generation light source, with neural-network powered multipointBAX achieving equivalent Pareto front results using more than two orders of magnitude fewer tracking computations compared to genetic algorithms. The significant reduction in cost positions multipointBAX as a promising alternative to black-box optimization, and we anticipate multipointBAX will be instrumental in the design of future light sources, colliders, and large-scale scientific facilities.

2025-11-22T00:32:44Z 10 pages, 8 figures Z. Zhang I. Agapov S. Gasiorowski T. Hellert W. Neiswanger X. Huang D. Ratner http://arxiv.org/abs/2511.17771v1 2025-11-21T20:36:21Z

The closed-off structure of the Fermilab Drift Tube Linac precludes a robust array of instrumentation from directly monitoring the H- beam that is accelerated from 750 keV to 116 MeV. To improve beam tuning and operational assessment of Drift Tube Linac performance, scintillator-based loss monitors were previously installed along the exterior of the first two accelerating cavities to assess low energy beam losses. Here we present a recent upgrade to the loss monitor system, including significant improvements in analog signal processing to address baseline-interfering noise; digitization of the signals to enable regular operational use and tuning; and a new remote operation upgrade of the translating loss monitor with precise positioning of the loss monitor along its nine-foot track. Data from the fixed and translating detectors collected under varying beam conditions validate the utility of the upgrade.

2025-11-21T20:36:21Z North American Particle Accelerator Conference (NAPAC2025) JACoW 2025 E. V. Chen Fermi National Accelerator Laboratory A. L. Saewert Fermi National Accelerator Laboratory R. V. Sharankova Fermi National Accelerator Laboratory 10.18429/JACoW-NAPAC2025-MOP096 http://arxiv.org/abs/2511.17314v1 2025-11-21T15:32:10Z

Beam stacking allows a Fixed Field alternating gradient Accelerator (FFA) to increase the extracted beam current whilst also allowing for a flexible time structure making FFAs a promising candidate for future spallation neutron sources and high beam intensity applications. For successful beam stacking, beam loss caused by RF knockout must be avoided. RF knockout can occur during beam stacking because of the finite dispersion function at the RF cavity location, which is unavoidable in a scaling FFA. In this work, the RF knockout resonance is characterised and through a series of experiments at the ISIS Neutron and Muon Source, we show that it is possible to suppress the loss from RF knockout.

2025-11-21T15:32:10Z 12 pages, 14 figures. Submitted to Physical Review Accelerators and Beams Carl Jolly David Kelliher Jean-Baptiste Lagrange Alan Letchford Shinji Machida David Posthuma de Boer Chris Rogers Andrew Seville http://arxiv.org/abs/2511.17287v1 2025-11-21T14:52:56Z

This paper presents a quantitative analysis of the impact of inelastic collisions with atoms in a crystalline environment on the channeling efficiency and intensity of the channeling radiation for high-energy electrons and positrons passing through oriented crystalline targets. This analysis is based on numerical simulations of the channeling process, which were performed using the MBN Explorer software package. Ionising collisions are considered random, fast and local events, and are incorporated into the classical relativistic molecular dynamics framework according to the previously described algorithm. The case studies presented refer to 10 GeV electrons and positrons incident on single crystals of diamond and silicon, oriented along the (110) and (111) planes, with thicknesses of up to 1 mm for electrons and 6 mm for positrons. To elucidate the role of ionising collisions, simulations were performed with and without accounting for them. It is shown that, for electrons, both approaches lead to similar results with regard to both the channelling efficiency and the radiation intensity. In practical terms, this means that numerical simulations can be carried out without accounting for ionising collisions, which are much faster yet produce similar results. For positrons, the ionising collisions reduce significantly the channeling efficiency. However, their impact on the radiation intensity strongly depends on the opening angle of the cone within which the radiation emission is collected. A quantitative analysis of this feature is presented in the paper.

2025-11-21T14:52:56Z 24 pages, 10 figures Andrei V. Korol Andrey V. Solov'yov http://arxiv.org/abs/2511.17222v1 2025-11-21T13:09:00Z

The present paper is a short introduction to metal forming. The paper highlights the different disciplines that should be considered when analyzing metal forming. Hence, mechanical flow, heat flow, mechanical and thermal contact, and microstructure evolution are presented within the perspective of metal forming. For every aspect, well-established knowledge is presented in addition to scientific open questions on which active research is still done.

2025-11-21T13:09:00Z 26 pages, CAS - CERN Accelerator School: Mechanical & Materials Engineering for Particle Accelerators and Detectors, 2-15 June 2024, Sint-Michielsgestel, Netherlands Charbel Moussa Pierre Montmitonnet http://arxiv.org/abs/2511.17141v1 2025-11-21T11:04:48Z

Here, we demonstrate and investigate how Distributed Acoustic Sensing (DAS) can be utilized on research campuses and in large scientific infrastructures to study environmental vibrations and reduce their impact on high-precision experiments. We first discuss the potential of DAS in the context of particle accelerators, gravitational wave detection experiments and research campuses. Next, we present the results of our seismic measurement campaign conducted with our proto-network, which involved the probing of over 12 km of fiber, in May 2021. This campaign was conducted by the Hamburg WAVE initiative in Science City Hamburg Bahrenfeld and included DESY, the European XFEL, PETRA III and the University of Hamburg. Our proto-network confirms the ability to observe natural, anthropogenic, and infrastructural vibrations and how and where these couple into different parts of the heterogeneously set up fiber network. We also present results on a study of noise and motion coupling aspects of DAS probing double-redundant fiber loops in a unique environment, the European XFEL. Our results show that DAS greatly benefits research campuses and large scientific infrastructures and they highlight the opportunities and challenges of implementing and operating such seismic networks.

2025-11-21T11:04:48Z 14 pages, 5 figures Oliver Bölt Luigia Cristiano Sandy Croatto Dirk Gajewski Erik Genthe Oliver Gerberding Céline Hadziioannou Conny Hammer Markus Hoffmann Katharina-Sophie Isleif Antonia Kiel Charlotte M. Krawczyk Regina Maass Ingra Barbosa Norbert Meyners Reinhardt Rading Holger Schlarb Roman Schnabel Wanda Vossius Christopher Wollin http://arxiv.org/abs/2410.18817v2 2025-11-21T10:56:43Z

The spontaneous conversion of muonium to antimuonium is one of the interesting charged lepton flavor violation phenomena offering a sensitive probe of potential new physics and serving as a tool to constrain the parameter space beyond the Standard Model. The Muonium-to-Antimuonium Conversion Experiment (MACE) is designed to utilize a high-intensity muon beam, a Michel electron magnetic spectrometer, a positron transport system, and a positron detection system, to either discover or constrain this rare process with a conversion probability of $\mathcal{O}(10^{-13})$. This article presents an overview of the theoretical framework as well as a detailed description of the experimental design for the search for muonium-to-antimuonium conversion.

2024-10-24T15:04:04Z 45 pages, 51 figures, 14 tables. Accepted by Nuclear Science and Techniques Nuclear Science and Techniques, volume 37, article number 57, (2026) Ai-Yu Bai Hanjie Cai Chang-Lin Chen Siyuan Chen Xurong Chen Yu Chen Weibin Cheng Ling-Yun Dai Rui-Rui Fan Li Gong Zihao Guo Yuan He Zhilong Hou Yinyuan Huang Huan Jia Hao Jiang Han-Tao Jing Xiaoshen Kang Hai-Bo Li Jincheng Li Yang Li Daming Liu Shulin Liu Guihao Lu Han Miao Yunsong Ning Jianwei Niu Huaxing Peng Alexey A. Petrov Yuanshuai Qin Mingchen Sun Jian Tang Jing-Yu Tang Ye Tian Rong Wang Xiaodong Wang Yi Wang Zhichao Wang Chen Wu Tian-Yu Xing Weizhi Xiong Yu Xu Baojun Yan De-Liang Yao Tao Yu Ye Yuan Yi Yuan Yao Zhang Yongchao Zhang Zhilv Zhang Guang Zhao Shihan Zhao 10.1007/s41365-025-01876-0 http://arxiv.org/abs/2503.13088v3 2025-11-20T09:56:18Z

The generation of attosecond X-ray pulses has garnered significant attention within the X-ray free-electron laser (FEL) community due to their potential for ultrafast time-resolved studies. Such pulses enable the investigation of electron dynamics with unprecedented temporal resolution, opening new avenues in fields such as quantum control and ultrafast spectroscopy. In an FEL, the mode-locking technique synthesizes a comb of longitudinal modes by applying spatiotemporal shifts between the co-propagating radiation and the electron bunch. Here, we propose a novel scheme for generating two-color attosecond mode-locked FEL pulses via orbit control in two-stage mode-locked undulators. Specifically, a chicane with a wiggler inserted in the middle generates periodic temporal-transverse modulation in the electron beam. In this configuration, the low-energy and high-energy components of the beam lase in separate undulator sections, with each producing attosecond mode-locked FEL pulses. Three-dimensional simulations with realistic parameters confirm that trains of 250-attosecond soft X-ray pulses at the gigawatt level can be independently generated in each undulator section. Furthermore, time delay between the two pulse trains can be adjusted over a range of several hundred femtoseconds.

2025-03-17T11:50:26Z 11 pages, 6 figures Tu Lingjun Sun Hao Yi Huaiqian Zeng Li Liang Yifan Yu Yong Wang Xiaofan Zhang Weiqing 10.1103/wn3m-s5xf http://arxiv.org/abs/2511.16125v1 2025-11-20T07:56:13Z

An experimental study of the parameters of electromagnetic and X-ray radiation was carried out on a small-sized direct-acting electron accelerator with inductive storage and a plasma opening switch. Frequency spectra have been determined, and the diagnostics of the power of the microwave component of the spectrum has been tested. An analytical comparison of radiation signals and power signals has been carried out. A method for determining the directivity pattern using a broadband power sensor has been proposed. An anechoic chamber and a reflective screen were used to suppress interference.

2025-11-20T07:56:13Z 6 pages, 10 figures, D. V. Vinnikov O. M. Ozerov V. V. Katrechko V. I. Tkachov S. V. Marchenko V. V. Ehorenkov S. A. Petrenko B. O. Brovkin O. V. Manuilenko I. N. Onishchenko http://arxiv.org/abs/2511.15143v1 2025-11-19T05:49:25Z

A collider based on beam-driven plasma wakefield acceleration will require the drive beam to transfer 10-100s of Joules to the plasma in each stage, with a drive-to-wake energy transfer efficiency exceeding 70%. Using an all-optical plasma source, we demonstrate significant progress towards these parameters, transferring at least 5.6 J from a 1.52 nC, 10 GeV electron beam to a $4.5\times 10^{16}\,\mathrm{cm^{-3}}$ hydrogen plasma while achieving at least $37\pm 3\%$ drive-to-wake energy transfer efficiency. We observe deceleration of some particles to less than 0.93 GeV with up to 90% of the charge participating in the interaction.

2025-11-19T05:49:25Z R. Ariniello V. Lee D. Storey C. Emma S. Gessner M. J. Hogan A. Knetsch M. D. Litos N. Majernik B. O'Shea http://arxiv.org/abs/2511.14987v1 2025-11-19T00:11:45Z

Field emission (FE) remains a significant hurdle for achieving optimal performance and reliability in super-conducting radiofrequency (SRF) cavities used in accelerator cryomodules. A thorough understanding of the generation and propagation of FE-induced radiation is therefore essential to mitigate this problem. The absence of standardized measurement protocols further complicates the comparison of radiation data across different testing phases and facilities. This highlights the need for a precise quantitative method to diagnose and analyze FE-induced radiation. Such efforts could prove beneficial for improving cavity preparation and cleanroom assembly techniques during the prototype and production stages of Fermilab's Proton Improvement Plan-II (PIP-II) project. This study presents the initial steps of detailed Geant4 simulations aimed at analyzing FE-induced radiation in the low-beta 650 MHz 5-cell elliptical (LB650) cavity. Our goal is to combine these results with radiation diagnostics to enhance diagnostic accuracy and optimize detector positioning. This integrated approach ultimately aims to improve the preparation, assembly, and testing procedures for PIP-II SRF cavities, ensuring the delivery of FE-free cryomodules.

2025-11-19T00:11:45Z 22nd Intl Conference on RF Superconductivity SRF 2025 S. A. K. Wijethunga Fermi National Accelerator Laboratory A. Sukhanov Fermi National Accelerator Laboratory O. Napoly Fermi National Accelerator Laboratory K. McGee Fermi National Accelerator Laboratory http://arxiv.org/abs/2511.14894v1 2025-11-18T20:33:32Z

The Fermilab Acceleraor Division, Beam Instrumentation Department, is always adopting modern and current software methodologies for complex DAQ architectures. This paper highlights the Redis Adapter (RA) as the key software component enabling high performance, modular communication between digitizers and distributed control systems by leveraging Redis and containerization. The RA provides a unified, efficient interface between Redis based data streams and consumer systems. In the legacy architecture, digitized data flowed through the custom, UDP based Distributed Data Communication Protocol in the middle layer. In the current system, DDCP remains the ingestion path, while the RA serves as the decoupling layer. The proposed system replaces old VME digitizers with a SOM-based digitizer that communicates with Redis using the RA. The RA acts as both a performance-critical bridge and a protocol-agnostic adapter, ensuring compatibility with legacy control frameworks while enabling future scalability and modularity. This restructuring of the middle layer also helps the system achieve high throughput, reduce latency, and simplify the data path. Finally, we will demonstrate how RA is utilized in our two core products to deliver both legacy compatibility and future flexibility.

2025-11-18T20:33:32Z 20th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS 2025) S. Joshi Fermilab D. Steinkamp Fermilab http://arxiv.org/abs/2511.14373v1 2025-11-18T11:31:54Z

The paper reports the results of measuring the total dose of X-ray bremsstrahlung from a powerful X-ray source based on the high-current pulsed direct-action electron accelerator Temp-B. The parameters of the high-current, tubular relativistic electron beam from the accelerator were as follows: energy 600 keV, current 13.5 kA, and pulse duration 1.0 mks. Using the pulsed magnetic field of a solenoid, the electron beam generated in a magnetically isolated diode was transported over a 55 cm distance toward the molybdenum converter. An auxiliary coil, connected in series with the solenoid, was placed adjacent to it to provide the desired magnetic field in the converter region and avoid beam losses. The methodology for determining the total dose of the produced X-ray bremsstrahlung is described. Polycrystalline detectors were used for measuring the X-ray bremsstrahlung dose. They were located 80 mm behind the converter in the polar plane, with a 20 deg separation. Measurements of the dose distribution over the polar angle showed symmetrical distributions of the radiation at both polar and azimuthal angles relative to the axis. Taking into account such symmetry and the fact that the electron beam radiates solely into the forward hemisphere, the integration over the entire sphere can be reduced to integration over just a fraction of 1/8 of the spherical surface, thereby reducing the required number of sensors. The experimentally obtained value of the total dose of the X-ray bremsstrahlung is 388.5 Gy per single pulse of the accelerator current, which is concentrated in a 120 deg cone in the direction of the beam movement.

2025-11-18T11:31:54Z 5 pages, 5 figures A. B. Batrakov S. I. Fedotov I. N. Onishchenko E. G. Glushko A. M. Gorban O. L. Rak O. V. Nevara Yu. N. Volkov http://arxiv.org/abs/2511.14173v1 2025-11-18T06:19:00Z

In the next 5 to 10 years, new fourth generation light sources will be coming online either from upgrades or as brand new facilities. The question regarding the competitiveness and the usability of a third generation light source is certainly in the mind of the scientific personnel, which includes both the beamline and the accelerator staff of any third Gen Research Infrastructures. At the Canadian Light Source (CLS), Accelerator Operation and Development (AOD) staff are responsible for the daily operation of the machines, their upgrades which extend to long term development and shall also raise awareness on their possibilities. The boundaries of this mind experiment are 1) we must use CLS infrastructure, 2) identify the existence of the knowledge to realize an idea, 3) the realization, with whom, how, with which funds and under which administrative supervision is out of bounds.

2025-11-18T06:19:00Z 9 pages, 3 figures Frederic Le Pimpec Cameron Baribeau Tonia Batten Grant Bilbrough Bud Fogal Melissa Ratzlaff Hamed Shaker Michael Sigrist Xiaofeng Shen Xavier Stragier Ward Wurtz http://arxiv.org/abs/2511.16694v1 2025-11-17T09:48:57Z

The use of electrical motors and other remote systems are important tools in radiation environments. Certain harsh radiation environments, such as particle accelerators, require the use of remote systems during operation. Stepper motors are one motor, in particular, that have acquired interest in the nuclear field for use in these remote systems. The stepper motor's precision in rotation and holding is a highly desired quality. In this review, the stepper motor is examined for use in radiation environments. The different mechanical parts are introduced and examined from the broader literature of previous work. We attempt to explain the different radiation destructive mechanisms involved with each part of the stepper motor and how the mechanics are affected. Current and past research is explored, identifying either radiation hard alternatives or thresholds of the materials involved, and a general review of stepper motor radiation effects as available in literature.

2025-11-17T09:48:57Z 17 pages, 4 figures, 1 table Logan Jackson Victor Boyer Tanner Rima Edward Cazalas