https://arxiv.org/api/jnFStDDS6zrjPfEalzJ7ujoWocw 2026-04-01T09:55:59Z 8732 255 15 http://arxiv.org/abs/2509.09766v2 2025-11-27T04:12:02Z

This work investigates amplitude-dependent nonlinear corrections to the dissipative conductivity in superconductors, using the Keldysh--Usadel theory of nonequilibrium superconductivity, which captures the nonequilibrium dynamics of both quasiparticles and the pair potential. Our rigorous formulation naturally incorporates both the direct nonlinear action of the photon field and indirect contributions mediated by nonequilibrium variations in the pair potential, namely the Eliashberg effect and the Higgs mode. The third-harmonic current, often regarded as a hallmark of the Higgs mode in disordered superconductors, arises from both the direct photon action and the Higgs mode. Our numerical results are in excellent agreement with previous studies. In contrast, the first-harmonic current, and consequently the dissipative conductivity, receives contributions from all three mechanisms: the direct photon action, the Higgs mode, and the Eliashberg effect. It is shown that that the nonlinear correction to dissipative conductivity in dirty-limit superconductors can serve as a fingerprint of the Higgs mode, appearing as a resonance peak at a frequency near the superconducting gap \( Δ\). In addition, our results provide microscopic insight into amplitude-dependent dissipation at frequencies well below \( Δ\), which is particularly relevant for applied superconducting devices. In particular, the long-standing issue concerning the frequency dependence of the amplitude-dependent quality factor is explained as originating from the direct nonlinear action of the photon field, rather than from contributions by the Higgs mode and the Eliashberg effect. Our practical and explicit expression for the nonlinear conductivity formula makes our results accessible to a broad range of researchers.

2025-09-11T18:00:02Z 20 pages, 9 figures. The journal accepted version Physical Review Applied 24, 064061 (2025) Takayuki Kubo 10.1103/8fh8-nknj http://arxiv.org/abs/2511.21956v1 2025-11-26T22:31:23Z

When modernizing a legacy application, it is easy to fall back on a like-for-like replica with new tools and updated design stylings, but this is an opportunity to explore making a more intuitive application that supports user tasks and efficiency. Rather than having a blank canvas-unburdened by legacy tech debt-to create a new application, you are working with an existing application that is integral to accelerator operations and one that expert users are already familiar with. Due to this, you might assume people will prefer the like-for-like, but you could be carrying forward the pain points, processes that are inefficient, and ultimately wind up with an application that no one wants to use because it doesn't solve existing problems. Getting users involved can make all the difference in your approach to modernizing a legacy application that caters to both newer and expert users. It also can bridge the gap between like-for-like and introducing new GUI design. Having a legacy application doesn't have to make the modernized one difficult to develop, as the existing application is a tool in how you move forward with the new application. It provides insight into areas that an application with a clean slate doesn't give you.

2025-11-26T22:31:23Z The 20th International Conference on Accelerator and Large Experimental Physics Control Systems JACoW 2025 M. Polzin Fermi National Accelerator Laboratory M. Guzman Fermi National Accelerator Laboratory 10.18429/JACoW-ICALEPCS2025-MOCR005 http://arxiv.org/abs/2511.21839v1 2025-11-26T19:11:59Z

The auto differentiable simulation is a type of simulation that outputs of the simulation include not only the simulation result itself, but also their derivatives with respect to various input parameters. It provides an efficient method to study sensitivity of the simulation results with respect to the input parameters. Furthermore, it can be used in gradient based optimization methods for rapidly optimizing design parameters. In this paper, we present the development of a fast and transparent auto-differentiation module/class designed for easy integration into numerous simulation codes. As an application, this auto-differentiation module is integrated into a parallel particle-in-cell code with message passing interface (MPI) on distributed memory computers.

2025-11-26T19:11:59Z Ji Qianga Yue Hao Allen Qiang Jinyu Wan http://arxiv.org/abs/2511.20912v1 2025-11-25T23:01:18Z

Among the many effects that occur in beam-beam electron-positron collisions at TeV energies, emission of hard synchrotron radiation, or beamstrahlung, has special importance. Beamstrahlung determines the energy spectrum of the most energetic electrons, positrons, and photons and supplies the initial condition for the calculation of all other QED processes. In this paper, we show that the description of beamstrahlung simplifies in the limit of large quantum parameter $Υ$, which is realized in 10 TeV collider designs. The beamstrahlung spectra for electrons and photons are given in terms of universal functions. We supply approximations to these functions that will be useful for more general studies of the beam-beam interaction at very high energies.

2025-11-25T23:01:18Z Dongxing He Arianna Formenti Spencer Gessner Michael Peskin http://arxiv.org/abs/2511.20444v1 2025-11-25T16:17:05Z

For the PIP-II program, transverse emittance in the Fermilab Booster must remain well controlled at higher bunch intensities. 4-plate beam position monitors (BPMs) have a small but measurable quadrupole moment, making it possible to infer transverse emittance. By compositing many BPMs together, it becomes possible to improve the quality of the quadrupole signal. The Fermilab Booster BPM system has been used to measure these quadrupole moments in the past year and derive emittances from them. Recent benchmarks show that the derived BPM emittances show similar emittance evolution and value to IPM and Multiwire data. This approach can both supplement and complement existing non-intercepting emittance monitors in accelerators.

2025-11-25T16:17:05Z North American Particle Accelerator Conference (NAPAC2025) JACoW 2025 M. A. Balcewicz Fermi National Accelerator Laboratory C. Y. Tan Fermi National Accelerator Laboratory 10.18429/JACoW-NAPAC2025-MOP016 http://arxiv.org/abs/2511.20219v1 2025-11-25T11:47:06Z

We describe an Xsuite simulation framework for the Fermilab Main Injector (MI) along with an evaluation of transition-crossing behaviors in the accelerator. In particular, we studied the introduction of quadrupole magnets into the lattice as part of a transition-jump system that will be implemented through the $2^{nd}$ Proton Improvement Plan (PIP-II). Simulated beam losses spurred by transition-induced instabilities were assessed under several systematic effects, including MI quad errors, magnet-to-magnet variability in the jump magnets, power-supply errors, and timing jitter.

2025-11-25T11:47:06Z North American Particle Accelerator Conference (NAPAC2025) JACoW 2025 A. P. Schreckenberger Fermilab R. Ainsworth Fermilab M. Xiao Fermilab 10.18429/JACoW-NAPAC2025-THP031 http://arxiv.org/abs/2511.19807v1 2025-11-25T00:27:49Z

We present an investigation into beam steering and radiation emission by sub-GeV electrons traversing bent silicon crystals. Using 855, 600, and 300~MeV electron beams at the Mainz Microtron (MAMI), we explored orientational coherent effects and particle dynamics in a 15~$μ$m-thick crystal bent along the (111) planes. Combined experimental and simulation analyses enabled the classification and quantitative assessment of the contributions from channeling, dechanneling, rechanneling, and volume capture to both beam deflection and radiation emission. Crystal steering remained effective even at 300~MeV, with measured channeling efficiencies exceeding 50\%, a record at such low energy. Channeling and volume reflection enhanced radiation emission by up to a factor of six compared to the misaligned orientation, highlighting strong orientational coherence effects in the sub-GeV regime. These findings confirm the feasibility of using bent crystals for efficient beam manipulation and high-intensity photon generation at low energies, supporting the development of novel light sources and beam control strategies at accelerator facilities operating in this energy range.

2025-11-25T00:27:49Z R. Negrello M. Romagnoni A. Sytov N. Canale D. De Salvador P. Fedeli V. Guidi V. V. Haurylavets P. Klag W. Lauth L. Malagutti A. Mazzolari G. Paternò F. Sgarbossa M. Soldani V. V. Tikhomirov D. Valzani L. Bandiera http://arxiv.org/abs/2511.19772v1 2025-11-24T22:57:09Z

The Fermilab Accelerator Science and Technology (FAST) Facility at FNAL is a dedicated research and development center focused on advancing particle accelerator technologies for future applications worldwide. Currently, a key objective of FAST Operations is to commission the 2.5 MeV IOTA Proton Injector (IPI) and enable proton injection into the Integrable Optics Test Accelerator (IOTA) storage ring. The low and medium-energy sections of the IPI include four frame-style dipole trims and two multi-function correctors with independently controlled coils, requiring readout of 32 analog channels for current and voltage monitoring in total. To reduce cost and optimize rack space within the PLC-based control system, a 32-to-4 analog signal multiplexing system was designed and implemented. This system enables real-time readback of excitation parameters from all magnetic correctors. This paper presents the design, construction, implementation, and performance of the multiplexing system.

2025-11-24T22:57:09Z North American Particle Accelerator Conference (NAPAC2025) JACoW 2025 Daniel R. MacLean Fermi National Accelerator Laboratory Dean R. Edstrom Fermi National Accelerator Laboratory 10.18429/JACoW-NAPAC2025-MOP004 http://arxiv.org/abs/2511.19658v1 2025-11-24T19:44:58Z

The Proton Improvement Plan II (PIP-II) project is a vital upgrade to the Fermilab accelerator complex. The magnet pulse rate of the PIP-II Injection system requires an increase from the current rate of 15 Hz to 20 Hz as well as a roughly 30% increase in the magnetic field of the new Orbital Bump (ORBUMP) pulsed dipole magnets in the Booster. The ORBUMP magnet mechanical design is presented in this paper. The ORBUMP magnet is secured in a vacuum box and the core is made up of 0.127 mm thick, low carbon steel laminations with a C-5 inorganic magnesium phosphate coating. The core is clamped using external tie bars welded to the core end plates. ANSYS Finite Element Analysis (FEA) was used to evaluate the clamping design to minimize the deflection of the core post welding of the tie bars. The water-cooled, single turn coil, which shapes the magnetic field by acting as the pole tips, is critical for the integrated field homogeneity. The coil manufacturing tolerances and fabrication techniques were evaluated to ensure the magnetic properties of the magnet could be obtained. The coil is electrically isolated from the core using virgin Polyether ether ketone (PEEK) insulating material in the gap. An investigation into the high voltage performance of the virgin PEEK insulator was conducted via partial discharge testing using a 1:1 scale sample.

2025-11-24T19:44:58Z to be published in IEEE D. Karas Fermi National Accelerator Laboratory K. Badgley Fermi National Accelerator Laboratory Z. Chen Fermi National Accelerator Laboratory V. Chernenok Fermi National Accelerator Laboratory M. Davidson Fermi National Accelerator Laboratory D. Harding Fermi National Accelerator Laboratory D. Johnson Fermi National Accelerator Laboratory V. Kashikhin Fermi National Accelerator Laboratory W. Robotham Fermi National Accelerator Laboratory T. Strauss Fermi National Accelerator Laboratory B. Szabo Fermi National Accelerator Laboratory J. Vander Meulen Fermi National Accelerator Laboratory http://arxiv.org/abs/2511.19230v1 2025-11-24T15:43:35Z

The Muon to Electron Experiment (Mu2e) requires a uniform beam profile from the Muon Delivery Ring to meet their experimental needs. A specialized Spill Regulation System (SRS) has been developed to help achieve consistent spill uniformity. The system is based on a custom-designed carrier board featuring an Arria 10 SoC, capable of executing real-time feedback control. The FPGA processes beam pulses of approximately 200 ns every 1.695 $μ$s, allowing for continuous monitoring of the extracted spill intensity through fast bunch integration. The system directly controls three quadrupole magnets, which work in conjunction with sextupole magnets to achieve third-order resonant extraction. Furthermore, the board interfaces with Fermilab's Accelerator Control Network (ACNET), enabling operators to modify spill regulation settings in real-time via the control network while providing diagnostic waveforms. These waveforms help operators monitor the process and fine-tune the feedback mechanisms. This paper presents an overview of the board's architecture and its initial progress toward regulating beam extraction. This initial version of the regulation system aims to evaluate baseline performance to inform future system improvements.

2025-11-24T15:43:35Z North American Particle Accelerator Conference (NAPAC2025) JACoW 2025 J. R. Berlioz Fermi National Accelerator Laboratory D. Bracey Fermi National Accelerator Laboratory B. Fellenz Fermi National Accelerator Laboratory M. A. Ibrahim Fermi National Accelerator Laboratory V. Nagaslaev Fermi National Accelerator Laboratory A. Narayanan Fermi National Accelerator Laboratory P. Prieto Fermi National Accelerator Laboratory K. Danison-Fieldhouse Fermi National Accelerator Laboratory W. Sullivan Fermi National Accelerator Laboratory 10.18429/JACoW-NAPAC2025-MOP042 http://arxiv.org/abs/2511.19141v1 2025-11-24T14:06:20Z

The Fermilab Linac experiences longitudinal beam phase drift, leading to increased particle loss, conventionally corrected through labor-intensive manual RF adjustments. This project explores machine learning-based automation for drift correction, employing a prototype-based classification approach. Our model utilizes a 34-dimensional feature set (RF settings and BPM readings) and leverages a 7x27 response matrix for system modeling. To overcome limited real-world data, we generate synthetic data, enhancing model training and generalizability. Custom loss functions, including a surrogate energy-consistent loss and a temporal smoothness constraint, ensure physically plausible drift predictions. The goal is a robust system for autonomous phase adjustments, ensuring stable beam acceleration and reduced manual intervention.

2025-11-24T14:06:20Z North American Particle Accelerator Conference (NAPAC2025) JACoW 2025 R. R. Chichili University of Illinois at Chicago J. A. Sulskis University of Illinois at Chicago also at Georgia Tech Research Institute R. Sharankova Fermi National Accelerator Laboratory B. Vamanan University of Illinois at Chicago S. Ravi University of Illinois at Chicago 10.18429/JACoW-NAPAC2025-MOP011 http://arxiv.org/abs/2511.19099v1 2025-11-24T13:36:34Z

We present progress on the development of a machine learning (ML) regulation system for third-order resonant extraction of the beam delivered to the Mu2e experiment at Fermilab. We consider classical and ML-based controllers optimized on semi-analytic simulations and provide performance comparisons for several models. Additionally, we discuss the efficiency of each model in training, which has implications for future work on adaptive control. We also discuss progress on developing optimized implementations of ML models for edge-based inference.

2025-11-24T13:36:34Z North American Particle Accelerator Conference (NAPAC2025) JACoW 2025 A. Whitbeck Fermilab J. Berlioz Fermilab K. Danison-Fieldhouse Fermilab K. Hazelwood Fermilab M. Khan Fermilab J. Mitrevski Fermilab A. Narayanan Fermilab J. St. John Fermilab N. Tran Fermilab J. Ji Toyota Technical Institute of Chicago M. Walter Toyota Technical Institute of Chicago 10.18429/JACoW-NAPAC2025-MOP039 http://arxiv.org/abs/2511.18863v1 2025-11-24T08:08:06Z

Radiation of a charged particle crossing an alternating stack of slabs in the optical region is considered. Both disordered and periodic stacks are investigated. It is shown that for special type of alternating disordered and periodic stacks the radiation problem can be solved exactly for backward and forward Brewster observation angles. Strong $N^2$ dependence of radiation intensity on slab number is re-established in special case of the disordered stack. This leads to strong directivity either on forward or on backward Brewster angles depending on the type of stack randomness. In certain type of periodic photonic crystal, a strong energy dependence $E^4$ for relativistic particles of the radiation intensity, observed at Brewster's angle is found. Further increment of particle energy leads to saturation. The band structure of the corresponding photonic crystal (PhC) has a behavior, analogous to the Dirac cones in graphene. We suggest this special type $1D$ photonic crystal for application as a detector of relativistic particles.

2025-11-24T08:08:06Z 6 pages, 7 figures V. Gareyan Zh. Gevorkian http://arxiv.org/abs/2511.18061v1 2025-11-22T13:43:20Z

Recently, using two-dimensional particle-in-cell simulations, it has been demonstrated that in laser based proton acceleration with micro-structured targets, a single rectangular groove on the target front offers significant proton cut-off enhancement with linearly polarised laser pulses. In the present work, three-dimensional investigations are carried out to identify notable differences between cylindrical and cuboidal groove geometries both of which correspond to a rectangular groove in a two-dimensional case. In particular, a waveguide model is employed to analyse the effect of the groove geometry and extensive three-dimensional particle-in-cell simulations are performed to demonstrate the distinct behaviour of laser pulse and electrons for cylindrical and cuboidal grooves. Further, the effect of a circular polarisation of the incident laser pulse on the spectra of accelerated protons is studied. It is shown that contrary to our initial expectations, cylindrical symmetry and circular polarisation do not play well together and cause as much as 15$\%$ decay in proton cut-off energies as compared to the case of cylindrical symmetry and linear polarisation.

2025-11-22T13:43:20Z Page - 8, Figure - 10 Imran Khan Mohammad Yasir Vikrant Saxena http://arxiv.org/abs/2511.18044v1 2025-11-22T12:48:26Z

The survival of charged particles in synchrotrons requires avoiding setting the beam on machine resonances, the most dangerous of which are the integer and half-integer. Nevertheless, operationally, the transverse tunes may change dynamically, crossing these resonances, and resulting in unwanted beam quality degradation and beam loss. For high intensity beams the process of resonance crossing is even more critical as space charge, in addition to the incoherent effects, may generate also coherent effects on the beam envelope dynamics. The interplay of the speed of resonance crossing, the space charge incoherent tune spread, and half-integer resonance width are fundamental for the beam behavior. In this paper we study the crossing of the half-integer resonance $2Q_y=9$ in the CERN Proton Synchrotron Booster~(PSB) for a range of parameters using a coasting beam. We take advantage of the newly commissioned PSB to investigate the beam response experimentally. The experimental findings are also discussed with the support of simulations.

2025-11-22T12:48:26Z 12 pages, 16 figures Tirsi Prebibaj Fanouria Antoniou Foteini Asvesta Hannes Bartosik Giuliano Franchetti