https://arxiv.org/api/PYletJCZpSs7x0NQWuTYJpf9GRI 2026-06-21T13:47:15Z 8866 180 15 http://arxiv.org/abs/2603.24510v1 2026-03-25T16:50:37Z

Spin-polarized beams are important for some nuclear and high-energy physics experiments, such as those planned for the future Electron-Ion Collider (EIC). However, maintaining polarization during the acceleration of a charged-particle beam is difficult because the periodic nature of circular accelerators leads to spin-orbit resonances where the spin-precession frequency is a sum of integer multiples of the orbital frequencies. Usually, the dominant depolarization mechanisms are first-order spin-orbit resonances and the depolarization associated with crossing such a resonance can be computed using the Froissart-Stora formula. However, accelerating polarized hadron beams to high energy requires special magnet structures called Siberian snakes. When these are implemented to maintain a spin-precession frequency of one-half the revolution frequency, there will be no first-order spin-orbit resonance crossings. The dominant depolarization mechanisms are then higher-order spin-orbit resonances. The Froissart-Stora formula can be applied to higher-order resonances when the slope of the amplitude-dependent spin tune is constant. However, the slope of the amplitude-dependent spin tune often changes at the moment of resonance crossing. This work introduces a generalization of the Froissart-Stora formula which is applicable when the slope changes in this manner. The applicability of this formula is demonstrated through tracking simulations of a higher-order resonance crossing in both a toy model and the Relativistic Heavy Ion Collider (RHIC). It is additionally shown that the Froissart-Stora formula is mathematically equivalent to the Landau-Zener formula for the diabatic transition probability in two-level systems with a linearly increasing energy gap and constant coupling. This work therefore also extends the Landau-Zener formula to the case of changing slope.

2026-03-25T16:50:37Z 12 pages, 7 figures Joseph P. Devlin Georg H. Hoffstaetter Desmond P. Barber http://arxiv.org/abs/2603.23285v2 2026-03-25T14:03:13Z

This work provides a brief review of the numerical methods for modelling the optical propagation of an ultrashort, intense laser pulse in plasmas and ionizable gases. These methods are implemented in an open-source simulation toolkit Axiprop, which is now actively used for design studies in the context of laser plasma acceleration of electrons (LPA). We present two examples of such studies: optical plasma waveguide generation, and phase-locked flying-focus LPA. These tools enable the identification of complex effects impacting both energy deposition during waveguide formation, and the pulse propagation dynamics that governs wakefield structure, ultimately determining the properties of the accelerated electron bunches. The developed tools and presented simulation designs are relevant to experiments on laser plasma interactions at modern high power laser facilities.

2026-03-24T14:49:07Z Igor A. Andriyash Cedric Thaury http://arxiv.org/abs/2411.18988v2 2026-03-25T07:52:42Z

Gamma-Ray Transient Monitor (GTM) is an all-sky monitor onboard the Distant Retrograde Orbit-A (DRO-A) satellite, with the scientific objective of detecting gamma-ray bursts in the energy range of 20 keV to 1 MeV. GTM is equipped with five Gamma-Ray Transient Probes (GTPs), utilizing NaI(Tl) scintillators coupled with silicon photomultiplier (SiPM) arrays for signal readout. To test the performance of the GTP in detecting electrons, we used the IHEP Electron-Beam Facility (a continuous-energy-tunable, low-current, quasi-single-electron accelerator) for ground-based electron tests of the GTP. This paper provides a detailed description of the operating principles of the electron accelerator and presents the process and results of the GTP electron-beam tests. The test results show that the GTP has a dead time of less than 4 $μ$s for normal signals and approximately 70 $μ$s for overflow signals, consistent with the design specifications. The time-recording capability of the GTP was tested and found to be normal, with accurate recording of overflow events. The GTP's response to electrons in the 0.4-1.4 MeV range is also normal. Additionally, we used Geant4 to simulate the GTP's energy response and performed a comparative analysis of the simulation and experimental results. The performance tests and ground-based electron calibration validated the design of the GTP and enhanced the GTP's mass model, laying the foundation for payload development, in-orbit observation strategies, and scientific data analysis.

2024-11-28T08:27:12Z 14 pages, 16 figures Pei-Yi Feng State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Guangxi Key Laboratory for Relativistic Astrophysics, School of Physical Science and Technology, Guangxi University, Nanning 530004, China Zheng-Hua An State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Yu-Hui Li Key Laboratory of Particle Acceleration Physics & Technology, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Qi Le Key Laboratory of Particle Acceleration Physics & Technology, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Da-Li Zhang State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Xin-Qiao Li State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Shao-Lin Xiong State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Hong-Fei Guan Technology and Engineering Center for Space Utilization, Chinese Academy of Sciences, Beijing 100094, China Cai-Yun Shao Technology and Engineering Center for Space Utilization, Chinese Academy of Sciences, Beijing 100094, China Chen-Wei Wang State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Chao Zheng State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Jia-Cong Liu State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Xiang-Yang Wen State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Sheng Yang State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Ke Gong State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Ya-Qing Liu State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Xiao-Jing Liu State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Min Gao State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Xiao-Yun Zhao State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Fan Zhang State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Jin-Zhou Wang State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Xi-Lei Sun State Key Laboratory of Particle Detection and Electronics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Cong-Zhan Liu State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Wei-Bin Liu Key Laboratory of Particle Acceleration Physics & Technology, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Jian-Li Wang Key Laboratory of Particle Acceleration Physics & Technology, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Bing-Lin Deng Key Laboratory of Particle Acceleration Physics & Technology, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Yu-Guang Xie State Key Laboratory of Particle Detection and Electronics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China He Xu Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China Hong Lu State Key Laboratory of Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049, China http://arxiv.org/abs/2603.23836v1 2026-03-25T01:44:30Z

The optimization of the dynamic aperture (DA) of a storage ring is typically a non-convex problem with multiple local optima. Recent studies showed that reducing the variation of resonance driving terms (RDTs) along the longitudinal position improves DA very effectively, as the reduction in the longitudinal variation of lower-order RDTs suppresses higher-order nonlinear terms. Therefore, minimizing the longitudinal variation of third-order RDTs is crucial for DA optimization. In this paper, we prove that the longitudinal variation of third-order RDTs, quantified using their RMS value $f_{3,\mathrm{rms}}$ at sextupole locations, is a special convex function. In the space of sextupole strengths, the iso-surfaces of $f_{3,\mathrm{rms}}$ are a series of concentric and coaxial ellipsoidal surfaces, with the central position possessing minimum $f_{3,\mathrm{rms}}$. The scanning results of a storage ring lattice show a strong consistency between the distributions of $f_{3,\mathrm{rms}}$ and DA, indicating that the optimization of DA can be regarded as a roughly approximate convex optimization problem. Based on this, a fast DA optimization method based on particle tracking is developed, where a high-quality initial population for an intelligent algorithm is generated with a Gaussian distribution based on the geometric structure of $f_{3,\mathrm{rms}}$.

2026-03-25T01:44:30Z 10 pages, 12 figures Wanbin Li Zihan Wang Yuejing Huang Bingfeng Wei Zhenghe Bai http://arxiv.org/abs/2603.19507v2 2026-03-24T20:25:35Z

Reliable, high-intensity operation of the Fermilab Accelerator Complex is critical to the success of the Long-Baseline Neutrino Facility and Deep Underground Neutrino Experiment. We describe the requirements and infrastructure necessary to support routine use of artificial intelligence and machine learning (AI/ML) in the accelerator control system. Three capabilities are identified: a machine learning operations (MLOps) framework standardizing the lifecycle of AI/ML automation from data management through deployment and monitoring; a data quality framework defining and enforcing standards required to build trustworthy AI/ML applications; and workflow integration with large language models to assist physicists, engineers, and operators with information retrieval, code development, and routine analysis. Use cases spanning beam diagnostics, beam control, and support system automation illustrate the technical requirements across the complex.

2026-03-19T22:27:04Z 43 pages, 31 tables, 11 figures Tia Miceli Erik Gottschalk Donovan Tooke Evan Milton Robert Santucci Hayden Hoschouer Michael Balcewicz Jennifer Case Abhishek Deshpande Kit Fieldhouse Sudeshna Ganguly Beau Harrison Aisha Ibrahim Thomas Kobilarcik Michael Olander Abhishek Pathak Jason St. John Aaron Sauers http://arxiv.org/abs/2603.26774v1 2026-03-24T18:01:06Z

The chemRIXS instrument at the Linac Coherent Light Source offers new opportunities for studying solution-phase systems with time-resolved soft X-ray spectroscopy through the recently commissioned high-repetition-rate LCLS-II X-ray free electron laser. The orders-of-magnitude X-ray flux improvement provided by the superconducting accelerator, combined with corresponding advances in the optical laser system and the liquid jet recirculation system, enables studies on dilute systems with high signal-to-noise compared to what was possible with the LCLS-I copper accelerator. These capabilities open up time-resolved X-ray absorption spectroscopy and resonant inelastic X-ray scattering to entirely new classes of samples, as well as enabling the development of new soft X-ray spectroscopies on liquid samples. An overview of the beamline components and the first LCLS-II commissioning results are presented.

2026-03-24T18:01:06Z 14 pages, 10 figures David J. Hoffman Douglas Garratt Matthew Bain Christina Y. Hampton Benjamin I. Poulter Jyoti Joshi Giacomo Coslovich Frank P. O'Dowd Daniel P. DePonte Alexander H. Reid Lingjia Shen Daniel Jost Mina R. Bionta Joshua J. Turner Ming-Fu Lin Philip Heimann Stefan P. Moeller Jake D. Koralek Tyler Johnson K Ninh Raybel Almeida Adam Berges Stephanie Fung Shuai Li Eetu Pelimanni Amke Nimmrich Munira Khalil Linda Young Thomas J. A. Wolf Kristjan Kunnus Georgi L. Dakovski http://arxiv.org/abs/2602.06684v2 2026-03-24T12:59:23Z

The beam-breakup (BBU) instability in plasma accelerators is seeded by a transverse offset between the driver and a trailing bunch. The BBU instability induces oscillations in the trailing bunch, which are detrimental to its beam quality. When the instability is large, assuming little mitigation from ion motion and energy spread, the beam suffers emittance growth, and charge can be kicked transversely out of the plasma channel. The detrimental effect on beam quality is substantially worse at high efficiencies, which places constraints on the achievable power efficiency in applications such as linear colliders, where maintaining the beam quality is required. In this paper, we present the first experimental signatures of the BBU instability in data taken in the E302 experiment at the FACET-II facility at SLAC National Accelerator Laboratory. We use a specific beam-optical setup and a novel method to probe for transverse instabilities on diagnostic screens downstream of a magnetic dipole spectrometer. We complement the analysis with full 3D particle-in-cell (PIC) simulations of the plasma interaction using similar driver and trailing bunch parameters on a simulated FACET-II spectrometer.

2026-02-06T13:16:43Z O. G. Finnerud Department of Physics, University of Oslo E. Adli Department of Physics, University of Oslo R. Ariniello SLAC National Accelerator Laboratory S. Corde Laboratoire d'Optique Appliquée T. N. Dalichaouch Department of Physics and Astronomy, University of California Los Angeles C. Emma SLAC National Accelerator Laboratory S. Gessner SLAC National Accelerator Laboratory C. Hansel Department of Physics, Center for Integrated Plasma Studies, University of Colorado Boulder M. J. Hogan SLAC National Accelerator Laboratory C. Joshi Department of Electrical and Computer Engineering, University of California Los Angeles, Los Angeles D. Kalvik Department of Physics, University of Oslo A. Knetsch SLAC National Accelerator Laboratory C. A. Lindstrøm Department of Physics, University of Oslo M. Litos Department of Physics, Center for Integrated Plasma Studies, University of Colorado Boulder N. Majernik SLAC National Accelerator Laboratory K. A. Marsh Department of Electrical and Computer Engineering, University of California Los Angeles, Los Angeles B. D. O'Shea SLAC National Accelerator Laboratory I. Rajkovic SLAC National Accelerator Laboratory S. Rego Laboratoire d'Optique Appliquée D. Storey SLAC National Accelerator Laboratory C. Zhang Department of Electrical and Computer Engineering, University of California Los Angeles, Los Angeles http://arxiv.org/abs/2601.10898v2 2026-03-24T11:09:32Z

Attosecond X-ray pulse generation in modern X-ray free-electron lasers relies on strongly compressed, precisely tailored electron bunches, making accurate diagnostics and control of the longitudinal phase space (LPS) essential. In the self-chirping scheme, collective effects in the linac generate a strong energy chirp that is converted into high peak current through pre-undulator compression, enabling isolated attosecond pulse generation. Reliable operation of this scheme depends on precise LPS control and fast diagnostics. In this work, we present a U-Net-based neural network surrogate that predicts two-dimensional LPS distributions directly from accelerator settings. The model exhibits excellent agreement with start-to-end simulation results. These results demonstrate the potential of neural network surrogates to facilitate real-time tuning and control in attosecond X-ray pulse generation.

2026-01-15T22:53:15Z Yufei Wei Bingyang Yan Chenzhi Xu Jiawei Yan Haixiao Deng http://arxiv.org/abs/2603.21878v1 2026-03-23T12:09:34Z

Long-range muons produced in proton-proton collisions at the ATLAS interaction point constitute the primary background for neutrino interaction searches at the SND@LHC experiment. This work presents a comprehensive characterization of the muon flux throughout LHC Run-3, benchmarking Monte Carlo simulations against experimental measurements. Measured and simulated muon rates agree within 10-15% across all Run-3 configurations. Following the substantial background increase in 2024 as a result of a beam optics change, the reversion to nominal optics in 2025 did not restore the 2022-2023 levels due to the unprecedented adoption of horizontal crossing in ATLAS. As enlightened by simulation results, the latter enhanced the contribution of high-angle muons originating from diffractive proton losses in the LHC Dispersion Suppressor region. Their identification enabled the design of mitigation strategies that were experimentally validated. The simulation framework was also applied to the future High-Luminosity LHC configuration, resulting in a considerable muon rate rise, driven by both the planned luminosity increase and the enlarged magnet aperture. Nevertheless, the upgrade from emulsion films to silicon vertex detectors will preserve the efficiency of the experiment even in such a high-rate environment.

2026-03-23T12:09:34Z 11 pages, 9 figures, to be submitted to The European Physical Journal C (EPJC) The SND@LHC Collaboration http://arxiv.org/abs/2410.10380v3 2026-03-23T04:20:17Z

This article extends the study of the dynamical properties of the symmetric McMillan map, emphasizing its utility in understanding and modeling complex nonlinear systems. Although the map features six parameters, we demonstrate that only two are irreducible: the linearized rotation number at the fixed point and a nonlinear parameter representing the ratio of terms in the biquadratic invariant. Through a detailed analysis, we classify regimes of stable motion, provide exact solutions to the mapping equations, and derive a canonical set of action-angle variables, offering analytical expressions for the rotation number and nonlinear tune shift. We further establish connections between general standard-form mappings and the symmetric McMillan map, using the area-preserving Hénon map and accelerator lattices with thin sextupole magnet as representative case studies. Our results show that, despite being a second-order approximation, the symmetric McMillan map provides a highly accurate depiction of dynamics across a wide range of system parameters, demonstrating its practical relevance in both theoretical and applied contexts.

2024-10-14T11:07:58Z Nonlinear Dyn 114, 635 (2026) Tim Zolkin Sergei Nagaitsev Ivan Morozov Sergei Kladov 10.1007/s11071-026-12509-5 http://arxiv.org/abs/2601.08413v2 2026-03-23T01:50:41Z

Linac-based free-electron lasers (FELs) feature high brightness, narrow bandwidth, controllable polarization, and wide wavelength tunability. With the rapid development of superconducting radio-frequency technology, linacs can now operate at MHz-level repetition rates, enabling FELs with both high repetition rates and high average power. Beyond extreme ultraviolet (BEUV) radiation is of great interest for scientific research and industrial applications, especially for next-generation lithography. Owing to the main design parameters of SHINE, the generation of BEUV radiation is a natural capability of the facility. The BEUV characteristics at SHINE are investigated and its achievable performance as a high-average-power light source is evaluated. By applying undulator tapering to enhance the energy extraction efficiency, kilowatt-level BEUV radiation with controllable polarization is shown to be achievable. These results demonstrate that SHINE can provide a high-performance BEUV source, offering a realistic pathway toward a high-average-power light source for next-generation high-resolution lithography.

2026-01-13T10:32:20Z 19 pages, 8 figures Hanxiang Yang Zhangfeng Gao Bingyang Yan Wencai Cheng Nanshun Huang Haixiao Deng http://arxiv.org/abs/2509.14906v3 2026-03-22T01:34:09Z

X-ray free-electron lasers (XFELs) of high brightness have opened new opportunities for exploring ultrafast dynamical processes in matter, enabling imaging and movies of single molecules and particles at atomic resolution. In this paper, we present a straightforward method for multi-frame diffraction imaging, using the same electron beam to generate four-color XFEL pulses with adjustable wavelength separation and time delay. The optical klystron scheme is introduced to enhance FEL intensity and reduce the total length of undulators. The time delay is tuned via a magnetic chicane between the undulators with various colors. Using parameters of SHINE, start-to-end simulations demonstrate the effectiveness and tunability of our method, achieving representative results such as time delays of hundreds of femtoseconds and four-color XFEL pulses spanning 1.8 to 2.7 nm with 0.3 nm intervals. The proposed scheme enables the recording of multi-frame diffraction images in a single exposure, providing a new perspective for ultrafast molecular and atomic dynamics studies.

2025-09-18T12:31:06Z 11 pages, 11 figures Phys. Rev. Accel. Beams 29, 050704 (2026) Xiaodan Liu Hanxiang Yang Bingyang Yan Yue Wang Nanshun Huang Liqi Han Jie Cai Han Wen Jinqing Yu Haixiao Deng Xueqing Yan 10.1103/ygrv-6x6n http://arxiv.org/abs/2603.20916v1 2026-03-21T19:08:29Z

Plasma-based mid-infrared (MIR) laser generation has garnered significant interest owing to its advantage of high output power, continuous wavelength tunability, and ultrashort pulse durations. However, existing methodologies predominantly depend on high-intensity inputs at the hertz frequency level, with spectral energy concentrated near the central frequency, rendering them unsuitable for spectroscopic applications. This paper proposes and demonstrates a cascaded deceleration scheme that enables the generation of broadband MIR lasers with low energy inputs compatible with high-repetition-rate laser systems. By confining the input laser within a plasma channel, this approach preserves the laser intensity, which not only sustains the decelerating field strength but also enables the cumulative effect of deceleration across multiple distinct bubbles. Numerical simulations demonstrate that more than 30% of the 23 mJ input energy is converted into a broadband MIR output spanning wavelength from 0.58 to 6.86 μm, achieving peak powers on the order of gigawatts. The output exhibits unique time-frequency characteristics, defined by spectral sub-bands organized in a temporal sequence, wherein each sub-band comprises few-cycle pulses. Parametric analyses reveal that the spectral bandwidth broadens with increasing laser intensity, provided that the plasma density being adequate to ensure a sufficiently short deceleration length. This approach provides a practical, efficient route to broadband ultra-intense mid-infrared sources, promising for applications in Fourier transform spectroscopy and laser-induced electron diffraction.

2026-03-21T19:08:29Z TianLiang Zhang YunXiao He Shuang Liu JiuCheng Chen JianFei Hua Wei Lu http://arxiv.org/abs/2603.20733v1 2026-03-21T09:38:02Z

The interaction between a particle beam and the accelerating mode of a radiofrequency (RF) cavity cause beam loading, representing the beam-induced cavity fields. Beam loading leads to amplitude and phase errors in the cavity fields and reduces the beam quality, especially in accelerators with large beam currents, wideband RF cavities, or circular machines where particles stay for multiple turns. Insight into the principle of beam loading is helpful to understand the beam measurement results and propose efficient compensation methods in low-level RF systems. In this work, the beam loading effects are studied with the equivalent circuit model of standing wave cavities. Analytical results of beam-induced cavity voltages are derived for both a single bunch and a bunch train using the phasor Laplace transform method. The results are general for wideband cavities with a bandwidth that may cover multiple harmonics of the bunch repetition frequency. Based on the analysis, control methods in form of feedforward and feedback are proposed to compensate for the beam loading. Simulation studies are carried out to validate these control methods with a cavity simulator including both the RF drive and beam loading. The analysis and control methods are also applicable to the beam in a circular accelerator with coupled-bunch instabilities, which are discussed in the last part of this paper. This work also acts as a supplementary material to another work of the author, in which the beam loading effects are analyzed only for narrow-band cavities with only one beam harmonic appearing in the cavity bandwidth.

2026-03-21T09:38:02Z Zheqiao Geng http://arxiv.org/abs/2603.20524v1 2026-03-20T21:48:37Z

The Continuous Electron Beam Accelerator Facility (CEBAF) was the first large-scale accelerator to employ superconducting radiofrequency (SRF) cavities for continuous-wave operation. Ongoing research and development efforts continue to focus on increasing the intrinsic quality factor ($Q_0$) of these cavities in order to reduce cryogenic losses while maintaining operational gradients. In this work, we report on the application of high-$Q_0$ surface treatments to single-cell and multicell C100 and C75 style 1.5 GHz niobium cavities used in the CEBAF accelerator. Nitrogen infusion and oxygen alloying via medium-temperature baking were applied under heat-treatment constraints relevant to existing cavity hardware. Both processes yielded substantial improvements in $Q_0$ at moderate accelerating gradients, achieving values of approximately 2 $\times$ 10$^{10}$ at 2.07 K and 20 MV/m. The effectiveness of nitrogen infusion at reduced annealing temperatures and the successful extension of oxygen alloying to multicell cavities are demonstrated. These results establish viable pathways for implementing high-$Q_0$ treatments in CEBAF-compatible cavities and support future integration into cryomodules for reduced operational cryogenic load.

2026-03-20T21:48:37Z Pashupati Dhakal