https://arxiv.org/api/fEi9IFWMYTBPqOq+5rheypWdkUs 2026-06-21T12:46:29Z 8866 165 15 http://arxiv.org/abs/2604.04382v1 2026-04-06T03:12:21Z

Piezoelectric actuators are critical for achieving high accelerating gradients and preventing RF trips in narrow-bandwidth superconducting radio-frequency (SRF) cavities by compensating for detuning caused by Lorentz force detuning. Depending on the maximum acceleration gradient an appropriate piezo stroke requirement has to be fulfilled. Since the stroke of piezo actuators decreases at cryogenic temperatures, evaluating their performance under such conditions is essential. Common characterization methods either use the SRF cavity itself as a sensor or rely on capacitance measurements during cool-down. Both these approaches do not measure the stroke directly and involve a trade-off between measurement precision and experimental simplicity, as well as cost and time. We developed a new method for the direct and precise measurement of piezo stroke at cryogenic temperature inside a cryocooler-cooled cryostat using a laser displacement sensor. The setup was used to characterize and evaluate two piezo actuators for cavity frequency tuners of the ILC prototype cryomodule, which is currently being built at KEK. In this article we are reporting on the development, setup, test, and application of this novel method, allowing the direct stroke measurement of piezos in vacuum and at cryogenic temperatures.

2026-04-06T03:12:21Z Rishabh Bajpai Mathieu Omet Ashish Kumar http://arxiv.org/abs/2604.03702v1 2026-04-04T12:13:34Z

New superconducting materials, particularly iron-based superconductors (IBS), have recently attracted attention for their potential applications in particle detectors and accelerators. This paper discusses the application of these materials in multilayer structures for radio-frequency resonators used to accelerate charged particles, with the aim of improving performance compared to bulk niobium. These materials are compared with previously studied multilayers composed of conventional superconductors in terms of the maximum magnetic field they can withstand, their surface resistance, and their power loss per unit surface area. Finally, perspectives and future applications aimed at increasing operating temperatures are discussed.

2026-04-04T12:13:34Z Carlos Redondo Herrero Akira Miyazaki http://arxiv.org/abs/2512.02205v2 2026-04-02T17:04:47Z

The Integrable Optics Test Accelerator (IOTA) at Fermilab provides a versatile platform for studying the interplay of space-charge, impedance, and non-linear optics in high-intensity hadron beams within synchrotrons and storage rings. This report examines the parameters and dynamics of 2.5 MeV proton beam operations in two configurations of the bare IOTA lattice (dipoles, quadrupoles, sextupoles, and rf cavity only): one for demonstrating Non-linear Integrable Optics with the Danilov-Nagaitsev magnet, and the other for use with electron cooling. We offer order-of-magnitude estimates of the transverse emittance growth rate as a function of beam intensity, highlighting contributions from residual gas scattering, intra-beam scattering, and space-charge effects. Under nominal conditions, the beam lifetime is projected to be less than 7 minutes at low intensity with the current vacuum quality, and fewer than 100,000 turns at high intensity due to strong space-charge effects. The calculations presented here will guide strategies to mitigate emittance growth and inform future IOTA experiments.

2025-12-01T20:52:57Z matches published version JINST 21 T04001 (2006) N. Banerjee A. Romanov G. Stancari M. Wallbank 10.1088/1748-0221/21/04/T04001 http://arxiv.org/abs/2604.01892v1 2026-04-02T10:57:27Z

The X-ray brightness delivered by fourth-generation light sources strongly depends on the electron beam current and transverse emittance. Reaching higher brilliance and lower emittances are increasingly limited by intra beam scattering, particularly at low and medium beam energies, where low emittances combined with high beam currents result in large phase-space densities. Increasing the vertical emittance through betatron coupling is commonly employed to mitigate intra beam scattering by relaxing the phase-space density. However, the redistribution of damping partition numbers due to coupling, the presence of vertical dispersion, and consequently their impact on the balance between synchrotron radiation and intra beam scattering are often neglected. In this work, we develop a self-consistent Ordinary Differential Equations-based framework to describe both the steady-state and time evolution of three-dimensional beam emittances in the simultaneous presence of synchrotron radiation, quantum excitation, betatron coupling, vertical dispersion, and intra beam scattering; allowing for realistic damping partition numbers. The model consistently accounts for the modification of synchrotron radiation damping rates and intra beam scattering growth rates arising from betatron coupling. Application to the BESSY III lattice demonstrates that damping partition redistribution and optics modifications significantly influence the equilibrium emittances. A systematic comparison of vertical emittance generation via a transverse feedback-generated excitation, betatron coupling, and vertical dispersion highlights the trade-offs between horizontal emittance reduction and operational constraints.

2026-04-02T10:57:27Z 31 pages, 8 figures Sébastien Joly Jonas Kallestrup Félix Soubelet http://arxiv.org/abs/1812.09275v5 2026-04-02T01:14:53Z

This paper describes an analytical method to calculate the emittance growth rates due to intra-beam scattering in a circular accelerator with arbitrary x-y coupling. The underlying theory is based on the Landau collision integral and the extended Mais-Ripken parametrization of a coupled betatron motion. The presented results are based on calculations of average emittance growth rates for an initially Gaussian distribution. They are applicable to both bunched and continuous beams.

2018-12-21T17:35:14Z Valeri Lebedev Sergei Nagaitsev http://arxiv.org/abs/2603.29740v2 2026-04-01T09:01:09Z

Superconducting magnets for particle accelerators are particularly challenging to design because they involve a large number of coupled physical phenomena and the management of complex datasets. Artificial Intelligence (AI), including machine learning and advanced optimisation techniques, offers promising approaches to address these challenges and accelerate the design process. This paper presents a new AI-based optimisation and data management platform, and highlights several ongoing applications of AI methods carried out at CEA Paris-Saclay, including multiphysics optimisation using active learning, topology optimisation, holistic modelling of an Electron Cyclotron Resonance (ERC) ion source, and anomaly detection in quench events.

2026-03-31T13:38:18Z Damien F. G. Minenna Guillaume Dilasser Robin Penavaire Valerio Calvelli Thibault de Chabannes Thibault Lecrevisse Thomas Achard Jason Le Coz Christophe Berriaud Benoît Bolzon Antomne Caunes Phillipe Fazilleau Hélène Felice Clément Genot Antoine Guinet Nikola Jerance François-Paul Juster Thibaut Lemercier Gilles Lenoir Clément Lorin Yann Perron Camille Pucheu-Plante Étienne Rochepault Damien Simon Francesco Stacchi Michel Segreti Vincent Trauchessec Olivier Tuske Hajar Zgour http://arxiv.org/abs/2603.29472v1 2026-03-31T09:20:12Z

This manuscript proposes a method to enable controlled high-gradient particle acceleration when requiring self-modulation of the drive bunch. While electron bunch seeding of self-modulation (eSSM) has been realised at a plasma electron density $n_\mathrm{pe}\cong10^{14}\mathrm{cm}^{-3}$, it has not been demonstrated at higher plasma densities due to limitations of available seed bunch properties. As experimentally shown in this manuscript, truncating available seed bunches with a relativistic ionisation front allows these limitations to be overcome. This seeding method is called truncated electron bunch seeding of self-modulation (teSSM) and experiments confirm that -- when using teSSM -- self-modulation becomes reproducible at $n_\mathrm{pe}=7\times10^{14}\mathrm{cm}^{-3}$. Additionally, the seed wakefield amplitude is also increased, which is known to be advantageous because it shortens the length needed to reach self-modulation saturation. The presented results establish teSSM as a method for achieving controlled, high-gradient particle acceleration with long drivers and available seed bunches.

2026-03-31T09:20:12Z 8 pages 5 figures N. Z. van Gils E. Belli M. Bergamaschi A. Clairembaud A. Gerbershagen E. Gschwendtner H. Jaworska J. Mezger M. Moreira P. Muggli F. Pannell L. Ranc M. Turner the AWAKE Collaboration http://arxiv.org/abs/2603.28549v1 2026-03-30T15:09:07Z

We present the development of a digital twin-based reconstruction framework for dielectric laser acceleration (DLA) based on machine-learning-assisted inversion of single-shot electron energy spectra. DLA as a promising candidate for compact electron accelerator designs using optical nearfields in dielectric nanostructures lacks on direct diagnostics on the laser-electron interaction. Thus, the outgoing electron energy distribution is one of the few experimentally accessible observables. To exploit this information, DLA interaction and mapping on the downstream spectrometer are treated as nonlinear measurement device whose response is described by the symplectic sixdimensional tracking code DLAtrack6D. This forward simulation model serves as a digital twin mapping laser-electron interaction parameters onto resulting energy spectra. For diagnostics, we are interested in the inverse mapping represented by a neural network trained by synthetic datasets generated with the forward simulation model. The reconstruction performance and parameter identifiability of the inverse model are evaluated for parameter ranges relevant to planned experiments at the ARES linac in the SINBAD facility at DESY. Simulation studies demonstrate that the method can recover pulse front tilt angles with an accuracy of about 1 deg and phase offsets with an RMSE of about 0.36 rad corresponding to a difference of 0.4 fs in arrival time. Training with noisy spectra further improves robustness against spectrometer noise. The trained surrogate model evaluates in the millisecond range, enabling shot-to-shot parameter estimation compatible with the 50 Hz repetition rate of ARES. The approach effectively transforms the DLA interaction region into a virtual in situ diagnostics for otherwise inaccessible laser parameters during experiment and provides a foundation for real-time monitoring and control of future DLA experiments.

2026-03-30T15:09:07Z submitted to Physical Review Accelerators and Beams Thilo Egenolf Oliver Boine-Frankenheim http://arxiv.org/abs/2603.28214v1 2026-03-30T09:35:02Z

Free-electron lasers (FELs) provide a revolutionary tool for capturing the structure and dynamics of matter in real time at the atomic scale. The size and cost of FELs can be substantially reduced by using laser wakefield acceleration (LWFA), which offers acceleration gradients orders of magnitude beyond radiofrequency technology, producing multi-GeV electron beams within tens of centimeters. This compactness opens the possibility of integrating multiple operating modes - from the EUV to X-rays including broadband operation - into one facility. Realizing this vision, however, faces key challenges: current LWFA bunches are too short to sustain sufficient radiation slippage, limiting FEL pulse energy at EUV wavelengths, while the large energy spread and emittance make X-ray lasing even more demanding. Here we present a LWFA-driven FEL scheme that addresses these challenges, enabling multi-mode operation spanning different wavelengths and bandwidths within a single facility. The scheme employs staged acceleration to reach multi-GeV energies while preserving beam quality, combined with a dual-chicane beamline that stretches the bunch to mitigate the radiation slippage for EUV FEL and tailors the energy chirp for diverse FEL bandwidth modes. Simulations demonstrate that the scheme can generate high-quality electron beams with energies up to 7 GeV and tunable energy chirp, enabling both FEL saturation from the EUV to X-ray wavelengths and large bandwidth operation with a bandwidth of up to 11%. This work provides a roadmap for compact, multi-mode FELs based on plasma acceleration, and the high-energy, high-quality beams achieved also point toward compact injectors for next-generation storage-ring light sources.

2026-03-30T09:35:02Z Hengyuan Xiao Fei Li Shuang Liu Yuchen Jiang Siqin Ding Zhi Song Jianfei Hua Wei Lu http://arxiv.org/abs/2603.28833v1 2026-03-30T08:07:24Z

This paper presents the principle scheme of the prototype of the fast single channel reactor operating in the traveling wave fission mode on the soft fast neutron spectrum. The reactor design has cylindrical symmetry. The problem of the radiation resistance construction materials in this experimental reactor is solved by the base proposals published by the authors of this article. The traveling wave fission mode is realised by the neutrons with the softened fast spectrum. The neutron spectrum peaks is in range 20000 - 50000 eV. That reduces the neutron impact on construction materials more than an order of magnitude. To further reducing neutron impact on construction materials in the reactor using elements of the hydravlic fuel handling system for nuclear fuel movement relative to the fuel channel walls. The nuclear fuel in which the fission wave travels is the cylindrical uranium dicarbide.

2026-03-30T08:07:24Z 9 pages, 4 figures Viktor Tarasov Sergey Chernezhenko Volodymyr Vashchenko Mykhailo Shcherbina Vyacheslav Lavrukhin http://arxiv.org/abs/2603.28827v1 2026-03-29T17:16:28Z

We present a quantum-mechanical calculation of positron channeling radiation in a planar harmonic potential, explicitly accounting for the interference between transition amplitudes from different transverse energy levels. Because the planar channel potential for positrons in diamond~(110) is well approximated by a parabola, the transverse spectrum is equidistant, $\varepsilon_n = Ω(n+\tfrac{1}{2})$, and all $n \to n{-}j$ transitions radiate at the same Doppler-shifted frequency. The entry of the positron into the crystal under the sudden approximation creates a Glauber coherent state with population amplitudes $c_n$. Phase synchronization between the $c_n$ and the dipole matrix elements ensures that all occupied levels contribute constructively to the radiation amplitude, giving an intensity $I_{\rm coh} \propto |A_j|^2$ that exceeds the incoherent (Zhevago--Kumakhov) result by a factor $\mathcal{G} = 12\text{--}31$ for positron energies of $4\text{--}14$~GeV in diamond~(110). Numerical results agree with the experimental peak positions of Avakyan \emph{et al.}~\cite{Avakyan1982}. The enhancement is unique to positrons because their nearly harmonic channel potential is not replicated for electrons. We propose a decisive experimental test of the coherent model based on the predicted nonlinear angular dependence of the peak intensity. The transition from $N$- to $N^2$-scaling of the radiated intensity, driven by quantum coherence, opens a route toward high-intensity monochromatic gamma-ray sources for nuclear physics and materials science.

2026-03-29T17:16:28Z 4 pages, 3 figures, 1 table. Applies Glauber coherent-state formalism to explain the anomalous peak intensity in SLAC positron channeling experiments (Avakyan et al. 1982); predicts N-to-N^2 intensity scaling as an experimental signature Michael Shatnev http://arxiv.org/abs/2511.03226v3 2026-03-28T02:01:28Z

We propose a novel acceleration scheme for fixed-field accelerators (FFAs), in which RF buckets with harmonic numbers $h = 1$ and $h = 2$ are time-sequenced to form a single, continuous acceleration path. This approach completes acceleration in two RF frequency sweeps, thereby reducing the total frequency sweep range and shortening the repetition period. The feasibility of this method is demonstrated through longitudinal simulations based on parameters of the FFA at the Institute for Integrated Radiation and Nuclear Science, Kyoto University (KURNS). We also establish operational conditions under which the second harmonic rf bucket remains stable and practically usable.

2025-11-05T06:31:40Z 9 pages, 10 figures. Published in Physical Review Accelerators and Beams. Minor textual revisions compared to the journal version Phys. Rev. Accel. Beams 29, 031303 (2026) Tomonori Uesugi Yoshihiro Ishi Yoshiharu Mori 10.1103/nch5-p3rk http://arxiv.org/abs/2512.10728v2 2026-03-27T14:52:29Z

We revisit the matching conditions for self-guided laser pulse propagation in plasma and refine their formulation to maximize the energy of electrons produced via laser wakefield acceleration. Bayesian optimization, combined with particle-in-cell simulations carried out in a quasi-three-dimensional geometry and a Lorentz-boosted frame, is employed. The optimization identifies the maximum electron energy that a self-guided laser wakefield accelerator, driven by a laser of a given energy, can produce, together with the corresponding acceleration distance. Our results further demonstrate that electrons with energies close to the maximum value can be obtained across a relatively wide range of input parameters and without the need for their precise tuning. This provides substantial flexibility for experimental implementation and significantly relaxes the operational constraints associated with self-guided laser wakefield accelerators.

2025-12-11T15:10:31Z 17 pages, 7 figures Machine Learning: Science and Technology 7, 025030 (2026) P. Valenta K. G. Miller B. K. Russell M. Lamač M. Jech G. M. Grittani S. V. Bulanov 10.1088/2632-2153/ae51e0 http://arxiv.org/abs/2603.26340v1 2026-03-27T12:00:56Z

The K130 Room Temperature Cyclotron (RTC) at the Variable Energy Cyclotron Centre (VECC), Kolkata has delivered a variety of ion beams for experimental programs with stable performance since the 1970s. The extracted beams are transported to experimental stations through four beamlines. In this work, a two-step semi-numerical optimization framework is presented to improve the transmission efficiency of these transport lines. At its core, the method relies on multiparticle simulations to account for beam losses and nonlinear effects, which render the problem analytically intractable. To address these complexities, a derivative-free global optimization framework is developed to systematically improve beam transmission in the cyclotron beamlines, and its effectiveness is demonstrated experimentally. In the first phase, the beam parameters at the beamline entrance are estimated using Bayesian optimization constrained by experimentally measured transmission ratios for selected optics configurations. In the second phase, the quadrupole gradients are optimized using the Covariance Matrix Adaptation Evolution Strategy (CMA-ES) to maximize beam transmission. Optimized settings computed using this simulation based semi numerical methodology were then experimentally validated, achieving beam transmissions exceeding 70%.

2026-03-27T12:00:56Z 26 pages, 9figures and 6 tables Arup Ratan Jana Animesh Goswami Malay Kanti Dey http://arxiv.org/abs/2602.08648v2 2026-03-27T10:59:31Z

Understanding the thermal behaviour of superconducting accelerator magnets is essential to ensure their stable and reliable operation. This work presents an extension of the Finite Element Quench Simulator (FiQuS) Multipole module to include collar and pole regions of accelerator magnets, which influences the overall thermal response. A thermal thin shell approximation (TSA), which is shown to be effective from previous works, is employed to model thermal insulation layers efficiently, replacing an insulation surface mesh. The main novelty of this work lies in the development of a method to model the thermal connection between the magnet winding and the collar and pole regions via the TSA. To assess the accuracy and computational efficiency of this method, temperature and field variations are computed for a current ramp-up scenario. The thermal solution is coupled to a fully resolved magnetodynamic solution to capture the interaction between thermal and electromagnetic behaviour. The results obtained with the TSA are then compared to classical finite element (FE) solutions with explicitly meshed insulation domains. The TSA predicts the maximum temperature within 2-4 % of the reference solution while substantially reducing mesh complexity and achieving up to a 5 times speed-up in computation time. While the TSA has traditionally been employed for short-duration quench simulations with high heat fluxes between magnet turns, these results demonstrate its reliability and efficiency for current ramp scenarios with low heat fluxes, significantly expanding its application range beyond what has been previously reported in the literature. To illustrate potential applications of this new functionality, conduction cooling through the collar region is studied, comparing different cooling configurations and collar materials.

2026-02-09T13:43:57Z This is the version of the article before peer review or editing Cryogenics 160 (2026) 104393 Emma Vancayseele Erik Schnaubelt Louis Denis Christophe Geuzaine Arjan Verweij Mariusz Wozniak 10.1016/j.cryogenics.2026.104393