https://arxiv.org/api/ufXiuFDSbCAl5YiwClUs0AaYB0I 2026-03-26T14:30:38Z 8723 150 15 http://arxiv.org/abs/2601.13123v1 2026-01-19T15:11:17Z

This paper gives an overview about aspects of mechanical engineering of undulators. It is based mainly on two types that are used in the SwissFEL facility. The U15 Undulator is an example of an in-vacuum type and the UE38 is an APPLE-X type. It describes the frame, the adjustment of the magnets with flexible keepers and the adjustment of the whole device with eccentric movers.

2026-01-19T15:11:17Z 12 pages, contribution to the CAS - CERN Accelerator School: Mechanical & Materials Engineering for Particle Accelerators and Detectors, 2-15 June 2024, Sint-Michielsgestel, Netherlands Haimo Joehri http://arxiv.org/abs/2601.13120v1 2026-01-19T15:06:40Z

Modern precision manufacturing faces the challenge of integrating accuracy requirements into a framework of agile and sustainable production technologies. This development leads to numerous further challenges, affecting almost all areas of precision manufacturing industry. To overcome those challenges, this article presents promising technologies and innovative solution concepts from the field of temperature measurement in the cutting zone, process design for advanced materials, the development of reconfigurable machine tools, the optimization of the temperature behaviour of high-speed spindles and the use of edge computing in machine tools. Using the presented solutions, modern precision machining can be made more future-oriented in terms of sustainability and resilience.

2026-01-19T15:06:40Z 15 pages, contribution to the CAS - CERN Accelerator School: Mechanical & Materials Engineering for Particle Accelerators and Detectors, 2-15 June 2024, Sint-Michielsgestel, Netherlands Eckart Uhlmann Mitchel Polte Toni Hocke Julius Tschöpel http://arxiv.org/abs/2601.12836v1 2026-01-19T08:47:10Z

The current study reports the design of advanced light-weight materials for high-energy accelerator beampipe applications. The objective is to optimize the combined requirements of high radiation length and stiffness properties of the designed materials. The present study targets conventional beampipe materials such as aluminum, titanium, and stainless steel as primary performance benchmarks. These conventional beampipes are used at synchrotron radiation sources, such as Indus-1 and Indus-2 in India, the Nuclotron-based Ion Collider Facility in Russia, and the ring synchrotron facility SIS 100/300 at the Facility for Antiproton and Ion Research in Germany. In this context, a series of ternary Mg--Al--Li alloys is systematically investigated to enhance the figure of merit. Two aluminum--rich alloys, A1 ($\mathrm{Al_{61.5}Li_{10.8}Mg_{27.7}}$) and A2 ($\mathrm{Al_{66}Li_{19.4}Mg_{14.6}}$), along with three magnesium-rich alloys, M1 ($\mathrm{Al_{23.9}Li_{29.3}Mg_{46.8}}$), M2 ($\mathrm{Al_{19}Li_{20.6}Mg_{60.4}}$), and M3 ($\mathrm{Al_{39.8}Li_{20.1}Mg_{40.1}}$) are explored. Thermodynamic stability, density, liquidus temperature, and phases are evaluated using Latin hypercube sampling within the Thermo-Calc TC-Python framework. Elastic properties are obtained from density functional theory calculations performed using the Vienna \textit{Ab Initio} Simulation Package. Our results show that, although the elastic moduli ($E$) of the investigated Mg-Al-Li alloys are comparable to those of conventional beampipe materials, their significantly higher radiation lengths ($X_0$) lead to an overall improvement in the figure of merit $X_0 E^{1/3}$.

2026-01-19T08:47:10Z 9 pages and 5 figures. Comments are welcome Kamaljeet Singh Kangkan Goswami Raghunath Sahoo Sumanta Samal http://arxiv.org/abs/2601.10829v2 2026-01-19T07:49:34Z

We propose a nested Wolter-I mirror design for a neutron condenser, which is based on established X-ray telescope technology. We demonstrate through simulations that it can increase the flux density at the ESS imaging instrument ODIN by up to two orders of magnitude. Experimental measurements of reflectivity and figure errors on a prototype mirror element confirm the technical feasibility of the approach. Then, we discuss design strategies for an imaging objective to fully exploit the condenser specifications while achieving spatial resolutions comparable to those of X-ray micro-CT instruments. Analytically, we show that for monochromatic beams suitable solutions exist employing arrays of hundreds of identical objectives, realized either as compound refractive lenses (CRLs) or Fresnel zone plates (FZPs). To mitigate the inherent chromatic aberration of these optics, each individual objective could be replaced by an achromatic FZP/CRL combination. Key optical properties of the resulting microscope are estimated. This novel full-field microscopy concept for highly divergent, polychromatic neutron beams has the potential to improve temporal and spatial resolution for large samples and sample environments and to enable the simultaneous acquisition of hundreds of projections in neutron tomography.

2026-01-15T20:01:53Z 22 pages, 8 figures Henning Friis Poulsen Cæcilie Andersen Nolan Ravinet Joan Vila-Comamala Mano Raj Dhanalakshmi Veeraraj Erik Bergbäck Knudsen Peter Kjær Willendrup Sonny Massahi Finn Erland Christensen Desiree Della Monica Ferreira Markus Strobl Christian David Luise Theil Kuhn http://arxiv.org/abs/2601.11361v1 2026-01-16T15:17:37Z

Vacuum systems are an intrinsic part of any accelerator around the world: all particles circulate under vacuum. This lecture gives rudiments on the fundamentals of vacuum science such as units, ideal gas law, partial pressure, mean free path, flow of molecules, conductance, pumping speed, and outgassing. An overview of standard vacuum instruments for pressure measurement and pumping is presented. Finally, the specificities of accelerator vacuum systems are introduced, discussing some design, construction, installation, and commissioning aspects, as well as fundamentals of beam-vacuum interactions with synchrotron radiation and electron cloud.

2026-01-16T15:17:37Z 12 pages, contribution to the CAS - CERN Accelerator School: Mechanical & Materials Engineering for Particle Accelerators and Detectors, 2-15 June 2024, Sint-Michielsgestel, Netherlands Vincent Baglin http://arxiv.org/abs/2601.11302v1 2026-01-16T13:56:30Z

Particle accelerators represent some of the most sophisticated engineering achievements of our time. Their construction requires a unique combination of physics insight and mechanical engineering expertise. The aim of this paper is to provide young mechanical engineers with an introduction to the principles, methods, and challenges associated with the mechanical design of accelerators. The lecture upon which this proceeding is based emphasized the translation of functional requirements into engineering specifications, the critical importance of robust and reliable design, and the need for precisely defined drawings supported by international standards such as ISO GPS and GD&T. Through illustrative examples and a practical case inspired by CERN's existing components, the paper underlines the necessity of anticipating lifecycle demands, ensuring manufacturability, and safeguarding operational reliability. Particular emphasis is placed on the contractual value of 2D drawings, the practical application of functional dimensioning, and tolerance chain analysis. By reviewing common pitfalls and exploring best practices, the paper seeks to orient engineers towards design choices that balance cost, reliability, and performance.

2026-01-16T13:56:30Z 8 pages, contribution to the CAS - CERN Accelerator School: Mechanical & Materials Engineering for Particle Accelerators and Detectors, 2-15 June 2024, Sint-Michielsgestel, Netherlands Marc Timmins http://arxiv.org/abs/2412.09971v2 2026-01-16T11:08:17Z

The pepper-pot method is a widely used technique, originally proposed for measuring the emittance of space-charge-dominated electron beams from radio-frequency photoinjectors. With recent advances in producing high-brightness electron beams via laser wakefield acceleration (LWFA), the method has also been applied to evaluate emittance in this new regime. Here, the limitations of this method for measuring the emittance of LWFA electron beams are investigated, particularly in parameter regimes where the true beam emittance is overestimated. Conducting an experiment at the JETi200 laser system, we measured an upper bound for the geometric beam emittance of $(26.2 \pm 7.3)$ $μ$m mrad using the pepper-pot method. This result is consistent with GEANT4 Monte Carlo simulation of the pepper-pot diagnostic, with an input beam-emittance parameter that matches both PIC simulations of the laser-plasma accelerator and an independent measurement using the transient optical grating method.

2024-12-13T08:58:42Z 16 pages, 9 figures, journal accepted version F. C. Salgado A. Kozan D. Seipt D. Hollatz P. Hilz M. Kaluza A. Sävert A. Seidel D. Ullmann Y. Zhao M. Zepf http://arxiv.org/abs/2601.10694v1 2026-01-15T18:52:26Z

To increase the voltage multiplication factor in a small-sized direct-acting electron accelerator DIN-2K with an inductive energy storage and a plasma opening switch, it is necessary to ensure an increase in the rate of change of the current and its amplitude during the POS opening for the purpose of obtaining an explosive electron emission with the formation of an electron beam and a virtual cathode. However, the opening process depends on many electrical parameters of the plant, and it re-quires determining their joint and individual effect on its dynamics. The purpose of this research is to study and determine the effects of electrical parameters, including those of the discharge voltages of the entire electrical circuit of the accelerator on the dynamics of the plasma opening switch, in particular opening speed, current amplitudes, and opening time, as well as to give recommendations on optimizing the operation of accelerators of this type and highlight possible ways to increase the voltage multiplication factor. Methodology. A method for determining the induced voltage according to experimental current oscillograms has been proposed. The methodology was verified by the coincidence of its data with the results of measurements by a capacitive voltage divider with the data spread of less than 20%. Scientific novelty. The rates of change in the current at the plasma switch opening stage were determined depending on the main electrical parameters of the DIN-2K accelerator. The diagnostics of the voltage induced during the POS opening were provided using no capacitive voltage divider in the internal volume of the accelerator, which enabled the removal of some diagnostic tools from the working volume of the chamber. Practical significance.

2026-01-15T18:52:26Z 8 pages, 10 figures D. V. Vinnikov O. M. Ozerov V. V. Katrechko V. I. Tkachov O. V. Manuilenko I. N. Onishchenko http://arxiv.org/abs/2601.10430v1 2026-01-15T14:26:10Z

In this paper we extend a previous analysis of a newly conceived technique based on active interrogation of tectonic stress evolution in regions hosting active seismogenic faults. The aim is to monitor and detect stable and reliable precursor signals on an adequate time scale, well before an earthquake event, that can play a crucial role in activating alarms for civil protection systems. The precursor signal relies on continuous measurements of the time evolution of tectonic stress, obtained by interrogating underground, with a high energy collimated muon beam, the piezoelectric fabrics present in quartz rich granite like rocks surrounding a known seismogenic fault in the Earth crust. Beam propagation through the rock across the active fault conveys to a detector at the exit of the traversal information on the amplitude of the piezoelectric field, which scales with the tectonic stress applied to quartz crystals embedded in the rock. The system, named ERMES (Earthquake Reconnaissance using Muon beam Evolution in Silicon dioxide), differs from other techniques under study detecting electromagnetic signals generated by piezoelectricity outside the Earth crust, as it probes piezoelectric effects directly inside the source region of the associated electromagnetic field, namely the near field within quartz crystals rather than the far field in open space. We present a focused analysis of muon beam manipulation after rock traversal and before detection using a newly conceived muonic lens, and we explore the maximum rock penetration capability of a high energy muon beam, reaching about 3 km of rock thickness for a 10 TeV beam. Owing to the peculiarity of muon propagation through such kilometer scale targets, we cross checked previous FLUKA Monte Carlo simulations with Geant4 to clarify the secondary muons role generated by primary muon interactions in solid matter over long propagation lengths.

2026-01-15T14:26:10Z L. Serafini A. Bacci L. Bandiera F. Broggi I. Drebot A. Frazzitta A. M. Marotta G. Muttoni G. Paternò V. Petrillo M. Rossetti Conti A. R. Rossi S. Samsam M. Voltolini M. Zucali http://arxiv.org/abs/2512.06651v5 2026-01-15T11:50:43Z

An RF helical deflector is a type of electron and ion optics device that applies a time-dependent rotating transverse electric or magnetic field by means of time-dependent RF voltage applied on two opposite conducting helical structures (wires, ribbons or other) to deflect charged particles (a single, bunch or beam) in a circular or spiral path. It is a perspective indirect timing system being concurrent for reaching picosecond time resolution, and have promise being excellent candidate for high precision time-of-flight detection. As a timing system, it converts the temporal structure of an electron beam into a spatial pattern -- particularly, an ellipse in the case of a single-frequency RF voltage and continuous electron pencil beam. I propose a capacitor model of an RF helical deflector and compare it with the existing textbook model \cite{ZhigarevBook, Gevorgian2015}, interpret them and provide understanding of them. Furthermore, I analyze the latter, finding analytical formulas for the applied electric field, ellipse sizes (semi-axes) and rotation angle, lengths of the ellipse line, corresponding to the duration of electron pencil bunches or beams. The present article touches the topics of getting circle on resonance limit and of deflection sensitivity.

2025-12-07T04:27:08Z Hayk Lekdar Gevorgyan http://arxiv.org/abs/2601.10295v1 2026-01-15T11:13:18Z

High-temperature technical superconductors are potential candidates for compact and high-field tokamak magnets. The demand for higher fusion power can be met with an on-axis high magnetic field due to toroidal magnets. An R&D activity has been initiated at the Institute for Plasma Research, India, to develop a compact D-shaped superconducting magnet utilizing REBCO high-temperature superconducting tapes. Under this initiative, a toroidal configuration with a major radius of 0.42 m, consisting of eight D-shaped, four poloidal field, and a central solenoid high-temperature superconducting magnets producing an on-axis toroidal magnetic field of 0.23 T has been conceptualized. The fabrication feasibility of a D-shaped coil for this toroidal configuration also envisaged using stacked high-temperature superconducting cable. In this paper, we report the design of a compact D-shaped coil, the fabrication of a long length HTS cable, a winding pack, and its integration with a cryogenic casing and vacuum enclosure. The winding pack terminations, joints, its interfacing with the power supply, and performance testing are also reported in this paper.

2026-01-15T11:13:18Z Upendra Prasad Mahesh Ghate Piyush Raj Deven Kanabar Pankaj Varmora Swati Roy Arun Panchal Dhaval Bhavsar Anees Bano Nitish Kumar Bhadresh Parghi Akhilesh Yadav Mohd. Umer Vijay Vasava Raton Mandal Rajkumar Ahirwar Megha Thaker http://arxiv.org/abs/2601.09574v1 2026-01-14T15:45:22Z

The square matrix-based convergence map (CM) method has proven effective in characterizing nonlinear dynamics in several 4-D dynamical systems. However, when time-dependent perturbations, such as crabbing kicks in colliders, are present, a comprehensive 6-D analysis becomes essential to accurately capture the coupling between transverse and longitudinal motions. In this work, we extend the CM method to the full 6-D phase space by employing an eigen-decomposition-based formulation of the square matrix combined with iterative procedures. The proposed 6-D CM approach is first validated using a simplified crabbing map. We demonstrate that the 6-D CM preserves computational efficiency by using only one-turn map, while successfully resolving high-order resonance structures that remain unresolved by conventional frequency map analysis (FMA). This method is subsequently applied to the dynamic aperture (DA) study of the future Electron-Ion Collider (EIC). The results obtained from the CM analysis exhibit close agreement with those derived from FMA, demonstrating its potential as a powerful tool for nonlinear beam dynamics analysis and DA evaluation, as well as for broader applications in other nonlinear dynamical systems.

2026-01-14T15:45:22Z Jinyu Wan Yue Hao http://arxiv.org/abs/2508.19020v2 2026-01-12T14:16:50Z

Attosecond X-ray pulses are indispensable for exploring ultrafast phenomena in matter on Angstrom and attosecond scales. Here we propose a new method to realize spatiotemporal shaping of attosecond X-rays through temporal control of the orbital angular momentum mode content using an X-ray free-electron laser. The method exploits transverse-mode-dependent frequency pulling in a deliberately detuned second stage, together with slippage between the seed and the amplified radiation. Three-dimensional simulations show a double-spike waveform in which the two spikes carry different dominant topological charges. The spike separation is tunable and can reach several hundred attoseconds. This provides a source-level route to spatiotemporally structured attosecond X-rays with controllable temporal structure and topological mode content.

2025-08-26T13:40:41Z Chenzhi Xu Jiawei Yan Gianluca Geloni Christoph Lechner Haixiao Deng http://arxiv.org/abs/2601.07897v1 2026-01-12T11:41:05Z

In this paper, we present the potentiality and the application of a Compton source driven by the electron beam of EuPRAXIA, in interaction with a commercially available infrared laser.

2026-01-12T11:41:05Z Luca Serafini Vittoria Petrillo Alessio DelDotto Illya Drebot Anna Giribono Andrea Ghigo Stefano Romeo Andrea Renato Rossi Cristina Vaccarezza Fabio Villa Massimo Ferrario http://arxiv.org/abs/2601.04903v2 2026-01-12T11:12:12Z

Plasma wakefield accelerators (PWFA) represent one of the promising new accelerator concepts that are now being developed intensively for future applications in high-energy physics and industry. Among the unresolved problems of practical implementation of PWFA there are maintaining the required quality (emittance, size, energy spread of bunches) and stable transportation of drive and accelerated (witness) bunches over long acceleration distances. For improving the bunch transport, we propose to fill the bunch transport channel with the background plasma, the density of which is lower than the main plasma density building up an accelerating wake wave. We call this waveguide structure a layered plasma waveguide (LPW). The wakefield excitation by a regular sequence of electron bunches in the LPW of cylindrical configuration has been explored both analytically and numerically. The layered plasma has been modeled as a combination of a tubular plasma and a plasma column of significantly different densities. The plasma column has a lower density. The dispersion dependencies of the TM-modes of the LPW was obtained and analyzed, and it was found that there was a single TM wave resonant with the electron bunch. Based on the obtained analytical expressions, the structures of the axial and radial wakefield amplitudes have been numerically investigated for the cases of a single drive bunch and a regular train of bunches. It is shown that for certain density ratios of the outer and inner plasmas, it is possible both to accelerate and focus simultaneously the drive and witness bunches. The 2.5D particle-in-cell code was used to simulate the witness acceleration of an electron bunch by a wakefield created by drive electron bunches in a two-layer plasma wakefield accelerator. The simulation showed good agreement with the results of analytical calculations.

2026-01-08T12:58:42Z 19 pages, 13 figures, International Conference on Research and Applications of Plasmas, O1.1, Thursday, 18 September 2025. Warsaw, September 15-19 , 2025 G. V. Sotnikov K. V. Galaydych P. I. Markov