https://arxiv.org/api/UlGX5zdINaFIACXXZuKUeKDDB/E 2026-06-21T10:17:44Z 8866 135 15 http://arxiv.org/abs/2604.19103v1 2026-04-21T05:27:25Z

Standardization of data formats in a scientific discipline brings a range of benefits to researchers, as it enables the sharing of workflows and solutions to common problems, provides the foundation for generically useful tools that can be applied across the field, and gives a basis for cross-checking and validation that can be understood by all. Owing to the wide range of possible modes of description of particle accelerator lattices, a standard solution to this problem has not yet been developed for the field, although efforts are underway across the community. This article presents a schema for a comprehensive and generic format for describing particle accelerator lattices, encompassing physical element information, simulation code-specific parameters, control system variables, electrical and magnetic data, and other parameters, for each element. A translation layer is also provided in order to export this lattice into formats suitable for a variety of standard accelerator simulation codes. Based on this format, a framework has been developed for generating, tracking and analyzing beams through the lattice, providing a seamless transfer between simulation codes and the basis for a fully generic start-to-end simulation framework.

2026-04-21T05:27:25Z A. D. Brynes J. K. Jones M. King M. A. Johnson N. Ziyan http://arxiv.org/abs/2604.19101v1 2026-04-21T05:26:08Z

The simulation of a physical system in a virtual replica, known as a digital twin, is a useful way to interrogate the system non-invasively, providing the ability to perform predictive maintenance and surveillance, and to investigate potential novel configurations without perturbing the system. This article presents the implementation of an auto-generating digital twin architecture for particle accelerators: a virtual control system is generated to mirror the physical accelerator hardware, and used to update a simulation model which then feeds back the results into virtual diagnostics. All of the information about the accelerator lattice is cascaded down from a ground source of truth, removing any ambiguity about the naming of parameters between the simulation model and the virtual hardware. This design is modular and extensible, allowing researchers from different institutions to use their own models (for example, a machine learning model) and accelerator lattices while maintaining the overall structural coherence of the digital twin. This architecture has been tested for three accelerator facilities \textendash~CLARA, the ISIS injector, and the proposed UK XFEL \textendash~and aims to provide the foundation for a collaborative community effort in the development of shared technology towards a generic digital twin solution.

2026-04-21T05:26:08Z A. D. Brynes M. King K. R. L. Baker R. Banerjee R. Clarke D. J. Dunning J. K. Jones M. Leputa A. E. Pollard M. Romanovschi M. Shaw N. Ziyan http://arxiv.org/abs/2604.18466v1 2026-04-20T16:19:27Z

The TRAIN code, developed in 1995 as a post-processor for second-order transport maps from MAD, has been used extensively at the LEP and the LHC to study self-consistent closed orbits, tunes and chromaticities of bunch trains under the presence of beam-beam long-range (BBLR) and PACMAN effects.. This paper presents a modern re-implementation of the TRAIN concept in Python using well-known numeric libraries (numpy, scipy) and an optional link to MAD-X via cpymad. This greatly improves the usability, maintainability and extensibility of the code. New functionality includes the support for arbitrary particle types, an arbitrary number and distribution of beam-beam interaction points, and the extrapolation of the beam-beam induced closed-orbit effects to arbitrary points in the machine. The code is benchmarked against the classic TRAIN code, and simulation results are compared to observations from LHC physics operation.

2026-04-20T16:19:27Z Presented at the ICFA mini workshop: Beam-Beam Effects in Circular Colliders BB24 (September 2024, Lausanne, Switzerland) Michi Hostettler Xavier Buffat Tobias Persson Tatiana Pieloni Jorg Wenninger http://arxiv.org/abs/2604.18154v1 2026-04-20T12:15:11Z

The development of Ultra-High Frequency (UHF) linear accelerators via Metal Additive Manufacturing (MAM) is a strategic research focus of the RACERS team at GSI. The 704.4 MHz Crossbar H-mode (CH) cavity, proposed in 2021 to facilitate efficient frequency jumps and downsize accelerator footprints, represents both the highest-frequency CH structure to date and the first of its kind fabricated entirely through MAM. This study demonstrates the structure's capability for efficient beam acceleration in both Continuous Wave (CW) applications (e.g., accelerator-driven systems) and pulsed operations (e.g., spallation neutron sources). By operating in the UHF regime, the cavity inherently enhances sparking resistance, shifting the physical bottleneck away from surface electric field constraints to enable higher accelerating gradients. To manage the resulting thermal loads within compact dimensions, this study utilizes the design freedom of MAM to integrate a sophisticated "lotus-root-like" cooling network, which is a geometry unachievable through conventional subtractive machining. In combination with a kind of high-strength and high-conductivity alloy, CuCr1Zr, the cavity can achieve energy gain rates of 1.4-1.5 MeV/m (CW) and 4.6-4.8 MeV/m (pulsed), while maintaining a peak surface temperature of approximately 60 degrees Celsius. These results indicate that bridging additive manufacturing with advanced RF design provides a robust framework for next-generation UHF linac structures to go beyond current accelerating-gradient limits.

2026-04-20T12:15:11Z 19 pages, 16 figures, 5 tables Chuan Zhang Eduard Boos Roland Boehm Ramy Cherif Alexander Japs Stefan Wunderlich http://arxiv.org/abs/2604.17605v1 2026-04-19T20:33:50Z

Plasma acceleration promises to deliver high-energy particle beams by combining, or staging, several low- or medium-energy accelerator stages. However, chromatic aberrations from the combination of high divergence and energy spread make it nontrivial to transport beams between plasma-accelerator stages. This paper describes a compact and achromatic lattice optimized for staging, based on a new beam-optics element; a nonlinear plasma lens. The lattice preserves emittance for energy spreads up to several percent and has a tunable $R_{56}$ that enables bunch-length preservation or a longitudinal self-correction mechanism. The performance and limitations of the plasma-lens-based solution are modeled analytically and numerically, and compared to a more conventional yet novel solution based on quadrupole and sextupole magnets. While functional, the latter is double the length, has about twice the number of elements and a narrower energy bandwidth. Lastly, a solution for scaling to TeV energies is described, in which all lengths scale with the square root of the energy and the deleterious effects of coherent and incoherent synchrotron radiation are mitigated.

2026-04-19T20:33:50Z 26 pages, 15 figures, 5 appendices C. A. Lindstrøm E. Adli J. B. B. Chen P. Drobniak A. Huebl D. Kalvik C. E. Mitchell F. Peña K. N. Sjobak http://arxiv.org/abs/2509.09736v3 2026-04-18T19:49:30Z

Collisions of relativistic light ions, such as oxygen, neon, and magnesium, have been proposed as a way to examine the system-size dependence of dynamics typically associated with the quark-gluon plasma produced in collisions of heavier ions such as xenon, gold, or lead. Recent efforts at both the Relativistic Heavy Ion Collider (RHIC) and Large Hadron Collider (LHC) have produced large datasets of proton-oxygen, oxygen-oxygen, and neon-neon collisions, catalyzing intense interest in experimental backgrounds associated with light-ion collisions. In particular, electromagnetic dissociation of light ions while they are circulating in a collider can result in beam contamination that is difficult to simulate precisely. Here we propose a data-driven method for evaluating the potential impact of beam contaminants on physics analyses. The method exploits the time dependence and smaller size of contaminant ion species to define control regions that can be used to quantify potential contamination effects. A simple model is used to illustrate the method and to study its robustness. This method can inform studies of recent LHC and RHIC data and could also be useful for future light-ion programs at the LHC and beyond.

2025-09-10T17:02:35Z 9 pages, 8 figures. Updated to correspond to the final published version Phys. Rev. C 113 (2026) 044907 Sruthy Jyothi Das Austin Baty 10.1103/f4c5-yys5 http://arxiv.org/abs/2604.16189v1 2026-04-17T15:57:24Z

We report on the design and performance of a two-color dual-oscillator infrared free-electron laser (FEL). The mid-infrared (MIR) FEL at the Fritz Haber Institute (FHI FEL) has been upgraded to include a second oscillator FEL beamline that permits lasing in the far-infrared (FIR) regime from 4.5 μm to 175 μm. In addition, a 500 MHz kicker cavity has been installed downstream of the electron accelerator. It allows to deflect electron bunches of up to 50 MeV energy alternately left and right by an angle of {\pm}2°. It can, thus, split the high-repetition-rate (1 GHz) electron bunch train from the accelerator into two bunch trains of 500 MHz repetition rate each; one is steered to the MIR FEL and the other one to the new FIR FEL. In this two-color mode of simultaneous, synchronized operation the wavelengths in both FELs can be tuned independently over wide ranges of up to a factor of four each by undulator-gap variation. In addition, two-color operation is also available at reduced repetition rates (e.g. 55.6 MHz of both MIR and FIR pulses), as needed for some applications. This unique two-color mode opens up a wealth of novel user applications such as, MIR-FIR pump-probe experiments.

2026-04-17T15:57:24Z Wieland Schöllkopf Sandy Gewinner Marco De Pas Heinz Junkes Sebastian Kray William Kirstaedter William B. Colson David H. Dowell Stephen C. Gottschalk John W. Rathke Tom J. Schultheiss Alan M. M. Todd Lloyd M. Young Akash Chandra Behera América Y. Torres-Boy Martin Wolf Alexander Paarmann Gert von Helden Gerard Meijer http://arxiv.org/abs/2604.16180v1 2026-04-17T15:47:12Z

We report the experimental implementation of a Data-Driven Chaos Indicator (DDCI) [Y.~Li \emph{et al.}, Nucl.\ Instrum.\ Methods Phys.\ Res.\ A \textbf{1024} (2022) 166060] for online optimization of the National Synchrotron Light Source II (NSLS-II) storage ring. The DDCI quantifies the predictability of electron beam dynamics using turn-by-turn beam position monitor data. A surrogate model of the one-turn map is first trained, and its out-of-sample predictive uncertainty is then employed as a measurable indicator of chaos. By tuning sextupole magnets to mitigate nonlinear effects, a clear enlargement of the dynamic aperture is achieved, accompanied by a corresponding improvement in injection efficiency.

2026-04-17T15:47:12Z 4 pages, 4 figures Yongjun Li Minghao Song http://arxiv.org/abs/2604.16059v1 2026-04-17T13:34:10Z

Laser-plasma wakefield acceleration (LWFA) offers ultrahigh accelerating gradients in compact setups, but the complex non-linear nature of the process makes it challenging to generate high-quality beams. Injection of electron bunches from an external source into a plasma accelerator provides a promising route to improved performance; however, electron bunches from conventional radio-frequency (RF)-based injectors suffer from non-linear compression and laser-beam asynchrony, leading to energy jitter and emittance growth. We present a fundamental concept of terahertz-controlled electron bunches for external injection into LWFA. This terahertz-frequency approach provides temporal locking between the electron beam and the drive laser, and enables the compression of high-quality beams to sub-10-fs durations before injection into the LWFA. Numerical simulations demonstrate that GeV-scale acceleration with excellent beam quality and stability -- energy jitter and energy spread around 0.2% -- can be achieved using this method. This concept opens new opportunities for stable, multi-stage laser-driven accelerators and supports the development of next-generation applications such as free-electron lasers (FELs).

2026-04-17T13:34:10Z 8 pages, 4 figures Aras Amini Lewis R. Reid James K. Jones Morgan T. Hibberd Laura Corner Darren M. Graham Steven P. Jamison Graeme Burt Robert B. Appleby http://arxiv.org/abs/2604.16544v1 2026-04-17T04:44:12Z

We comment on Ref.[D. Karlovets, D. Grosman, and I. Pavlov, Phys. Rev. Lett. 136, 085002 (2026)], which proposes a BMT-like equation for the mean kinetic orbital angular momentum (OAM) of vortex particles in accelerator fields and draws spin-like conclusions about depolarization, resonances, and control. We show that the proposed closure is not generally valid even at the mean-value level. In the authors' own homogeneous-field model, Eq.(8) already makes $\langle L_z\rangle$ depend on the packet second moment $\langle ρ^2\rangle(τ)$; for an exact family of breathing Landau/LG packets this yields an explicit oscillation incompatible with Eq.(9) except in the nongeneric matched case. Moreover, the Appendix A assumption that mixed correlators are negligible suppresses the transverse kinetic-OAM components themselves, since those correlators are precisely the building blocks of $L_x$ and $L_y$. We also stress that, even if a closed equation for $\langle \hat{\mathbf L}\rangle$ were available, it would still not constitute a transport equation for a vortex quantum state. Mean-OAM transport does not determine OAM spectra, inter-mode coherences, or fidelity. State-level claims therefore require a mode-resolved density-matrix treatment rather than an Ehrenfest equation for a low-order moment.

2026-04-17T04:44:12Z 4 pages. This is the comment on the paper D. Karlovets, D. Grosman, and I. Pavlov, Phys. Rev. Lett. 136, 085002 (2026) DOI https://doi.org/10.1103/gsrz-cscl. ArXiv ID arXiv:2507.08763 S. S. Baturin http://arxiv.org/abs/2503.09557v4 2026-04-15T15:54:28Z

We present a novel approach for generating collider-quality electron bunches using a plasma photoinjector. The approach leverages recently developed techniques for the spatiotemporal control of laser pulses to produce a moving ionization front in a nonlinear plasma wave. The moving ionization front generates an electron bunch with a current profile that balances the longitudinal electric field of an electron beam-driven plasma wave, creating a uniform accelerating field across the bunch. Particle-in-cell (PIC) simulations of the ionization stage show the formation of an electron bunch with 220 pC charge and low emittance ($\varepsilon_x = 171$ nm rad, $\varepsilon_y = 76$ nm rad). Quasistatic PIC simulations of the acceleration stage show that the bunch is efficiently accelerated to 24 GeV over 2-meters with a final energy spread of less than 1% and emittances of $\varepsilon_x = 189$ nm rad and $\varepsilon_y = 80$ nm rad. This high-quality electron bunch meets the requirements outlined by the Snowmass process for intermediate-energy colliders and compares favorably to the beam quality of proposed and existing accelerator facilities. The results establish the feasibility of plasma photoinjectors for future collider applications making a significant step towards the realization of high-luminosity, compact accelerators for particle physics research.

2025-03-12T17:21:57Z Arohi Jain Jiayang Yan Jacob R. Pierce Tanner T. Simpson Mikhail Polyanskiy William Li Marcus Babzien Mark Palmer Michael Downer Roman Samulyak Chan Joshi Warren B. Mori John P. Palastro Navid Vafaei-Najafabadi http://arxiv.org/abs/2507.08374v2 2026-04-15T14:16:08Z

The Electron Cyclotron Resonance Ion Plasma ACcelerator (ECRIPAC) is an original concept for a plasma-based particle accelerator able to generate pulsed ion beams with adjustable energy, targeting mostly medical applications. This paper thoroughly reviews the working principle and physical theory behind the ECRIPAC accelerator concept, incorporating significant corrections to the existing limited literature on the subject, making it a suitable reference for future studies. Mathematical derivations for several physical formulas are also included. Moreover, a detailed theoretical investigation of the stability condition for the ion acceleration is presented, highlighting more stringent limitations than previously anticipated. Next, the impact of several physical parameters on the accelerator design is analyzed, providing an overview of achievable external fields and plasma characteristics allowing a stable ion acceleration.

2025-07-11T07:42:27Z 14 pages (10 of main text, 4 of appendixes+bibliography), 7 figures. arXiv admin note: substantial text overlap with arXiv:2507.07827 Physical Review E 113, 045211 (2026) Andrea Cernuschi Universite Grenoble Alpes, CNRS, Grenoble INP, LPSC-IN2P3, Grenoble, France Thomas Thuillier Universite Grenoble Alpes, CNRS, Grenoble INP, LPSC-IN2P3, Grenoble, France Laurent Garrigues Universite de Toulouse, Toulouse INP, CNRS, LAPLACE, Plasmas et Hors Equilibre, Toulouse, France 10.1103/5hk4-3md2 http://arxiv.org/abs/2507.07827v2 2026-04-15T14:13:13Z

The Electron Cyclotron Resonance Ion Plasma ACcelerator (ECRIPAC) is an original accelerator concept proposed in the nineties for the generation of highly energetic pulsed ion beams, suitable for a wide array of applications. The initial studies on the subject were characterized by an important calculation mistake, leading to an incomplete and erroneous literature on the topic. Nevertheless, the simple and well mastered techniques involved in the system (radio frequency and magnetic field), together with the device compactness, are strong motivations for further studies on ECRIPAC. This work proposes a comprehensive introduction to the ECRIPAC accelerator physics, including a summary of its corrected theory. The designs of several compact demonstrator devices, able to accelerate different ion species to energies up to 100 MeV, are presented. A particular focus is devoted to a He2+ accelerator, capable of generating 9.5 MeV/nucleon ions inside a 1.8 m long accelerating cavity. This device has been simulated using a Monte-Carlo (MC) code, developed to model the electron dynamics inside this system. The MC results show an excellent agreement with the updated theory, which validates the new theoretical framework of ECRIPAC. Finally, some estimations for the beam parameters of the ion bunch extracted from the accelerator are provided.

2025-07-10T15:00:20Z 7 pages, 2 figures Physical Review E 113, L043202 (2026) Andrea Cernuschi Universite Grenoble Alpes, CNRS, Grenoble INP, LPSC-IN2P3, Grenoble, France Thomas Thuillier Universite Grenoble Alpes, CNRS, Grenoble INP, LPSC-IN2P3, Grenoble, France Laurent Garrigues Universite de Toulouse, Toulouse INP, CNRS, LAPLACE, Toulouse, France 10.1103/xfhl-nxgx http://arxiv.org/abs/2512.11290v4 2026-04-15T14:04:11Z

This Letter uncovers five distinct charge transport modes and their transitions in dual-energy electron beam diodes. We via first-principle particle-in-cell (PIC) simulations establish that the specific mode (e.g., space charge oscillations) and the current transport characteristics are essentially governed by the interplay between the electron beam energy and injected current density. A generalized analysis is conducted for n-component electron beams, and a theoretical piecewise function is for the transmitted current density proposed, which agrees well with the PIC results under designed conditions. The discovery provides a mechanistic picture of multiple electron beam transport in diodes, paving the way for novel designs of high-performance modern vacuum electronic devices.

2025-12-12T05:34:30Z Chubin Lin Jiandong Chen Huihui Wang Yangyang Fu 10.1103/4nj4-pncx http://arxiv.org/abs/2604.13372v1 2026-04-15T00:37:19Z

We report measurements of superradiant optical transition radiation in the 550-800 nm range produced by ultrashort relativistic electron bunches at a dielectric boundary. In the measured optical spectra, we observe photon production with quadratic charge dependence in the visible range, consistent with optical frequency coherence determined by the longitudinal electron bunch form factor. The measured spectral envelope is reproduced by a theoretical model of coherent transition radiation (CTR), which is consistent with a sub-femtosecond longitudinal feature within the electron bunch with characteristic scale $τ_{\mathrm{FWHM}} = 1.2~\mathrm{fs}$. These results extend CTR from the terahertz into the visible spectrum without the use of undulators or externally seeded microbunching. This superradiant boundary emission in the optical range opens a route to tunable coherent radiation from charged particle beams and provides a platform for broadband coherent light generation, enabling new opportunities for phase-sensitive optical experiments.

2026-04-15T00:37:19Z 10 pages, 5 figures Chad Pennington Gia Azcoitia Blae Stacey Willi Kuropka Jackson Rozells Francois Lemery Florian Burkart Sergio Carbajo