https://arxiv.org/api/aqcJdSfJEwbbrX8NsShjq+Ybacs 2026-09-11T00:59:44Z 9011 120 15 http://arxiv.org/abs/2606.04805v2 2026-07-23T16:31:56Z

We present the design of a high-energy polarized gamma-ray facility based on Compton backscattering (CBS) of laser pulses off the FCC-ee full-energy booster beams in the Z, WW, ZH and $t\bar{t}$ modes. Saturating the safe value of the kinematic parameter $κ=4.35$ fixes the laser wavelength in each mode and yields backscattered photons up to $ω_{\max}=148$ GeV. The conversion point operates on the booster cycle structure: fully parasitically on the 0.1 s top-up flat-tops ($f_{\rm CBS}=10^{-8}$ per bunch crossing, cumulative electron loss $3\times10^{-6}$ per cycle) or, as the baseline, in dedicated extended-flat-top fills inside the idle windows between top-up cycles ($f_{\rm CBS}=10^{-6}$, beam loss below 1% per cycle). The collider luminosity is unaffected in both scenarios, and the operational laser pulse energies lie in the sub-millijoule to few-millijoule range. Photon selection is performed event-by-event with a pair spectrometer on the high-energy Compton edge; for the unpolarized booster beam the Compton polarization transfer limits the achievable band-averaged circular polarization, and the selection is set to $|\langle S_2\rangle|=0.90$. We project the sensitivity to the polarized gluon distribution $Δg(x)$ via open-charm photoproduction $γp\to c\bar{c}X$ on an NH$_3$ dynamically polarized target, including NLO QCD corrections via K-factors and propagating polarized-PDF uncertainties through the 100 Monte Carlo replicas of NNPDFpol2.0. The projected total precision is $δ(Δg/g)_{\rm tot}\simeq 1.8$-$3.0\times10^{-2}$, a factor of 4-7 below the total uncertainty of the most precise existing direct measurement (HERMES), at four values of $\langle x\rangle$ in the medium-$x$ region $0.07\le x\le 0.19$. The facility would set the dominant constraint on $Δg$ in this region, complementary to the low-$x$ reach of the Electron-Ion Collider.

2026-06-03T12:30:05Z 18 pages, 8 figures, 8 tables. v2: numerical chain rebuilt on FCC FSR Vol. 2 booster parameters; two operating scenarios; polarization budget revised for the unpolarized booster beam (P_gamma = 0.90); conclusions unchanged A. C. Canbay S. Sultansoy F. Zimmermann http://arxiv.org/abs/2607.21684v1 2026-07-23T14:16:55Z

The monograph is devoted to theoretical and experimental studies of transition radiation produced by fast charged particles traversing media with interfaces. Particular attention is paid to X-ray transition radiation (XTR) generated at a single interface as well as in a single plate or in a stack of plates. The foundations of the general theory of transition radiation are presented, and the results of experimental studies of XTR properties are given together with a comparison with theoretical predictions. TRDs of high-energy particles used at modern accelerators and in cosmic-ray physics are described.

2026-07-23T14:16:55Z This is a book, X-Ray Transition Radiation, by the discoverer of the phenomenon, Professor Garibian Grigor, and his colleague, Professor Yang Shi. The book also includes a Quantum Field Theory treatment of the phenomena. The translation of the same-named 1983 book is by David Yang, the son of one of the authors and the founder of ABBYY Grigor M. Garibian Chi Yang http://arxiv.org/abs/2412.10715v3 2026-07-23T13:06:40Z

We present a simulation model for crystal-based beam extraction of lepton beams from an accelerator by using a bent crystal. This model utilizes the BDSim toolkit for particle dynamics in an accelerator in conjunction with the Geant4 G4ChannelingFastSimModel for beam deflection in a bent crystal and G4BaierKatkov for radiation losses. In order to link these codes, we designed a new BDSim accelerator component - a bent crystal compatible with G4ChannelingFastSimModel. As a demonstration, we constructed a complete simulation model of the DESY II Booster Synchrotron within BDSim, incorporating all relevant accelerator components and apertures. The model accounts for betatron and synchrotron oscillations, as well as radiation losses in an oriented crystal, using the Baier-Katkov radiation integral. Simulation results demonstrate the extraction of a primary monoenergetic 6 GeV electron beam, characterized by a charge of 23 pC, a horizontal beam emittance of 3.6 $μ$m$\cdot$rad, a vertical beam emittance of 0.32 $μ$m$\cdot$rad, and an energy spread of 0.008. Under the simulated conditions, (1.42 $\pm$ 0.02 %) of the initial circulating beam reaches the septum entrance. This corresponds to an extraction efficiency of (28.1 $\pm$ 0.4 %) when evaluated relative to the particles intercepted by the bent crystal. The approach provides a powerful tool to significantly accelerate R\&D for applications related to crystal-based extraction and collimation in lepton accelerators and colliders.

2024-12-14T06:58:11Z A. Sytov G. Kube L. Bandiera V. Guidi A. Mazzolari G. Paternò S. Strokov http://arxiv.org/abs/2607.19991v1 2026-07-22T10:23:21Z

We recently introduced a novel interferometric method inspired by radio astronomy, utilizing a Non-Redundant Aperture (NRA) mask with self-calibration to fully characterize the two-dimensional transverse shape of electron beams from a single-shot interferogram. This paper reports the latest advancements in this technique, including a new data analysis approach based on closure amplitudes, which removes the need for self-calibration. We also demonstrate the method's applicability to wavefront sensing, and we explore its potential for resolving beam halos superimposed on well-defined Gaussian beam core.

2026-07-22T10:23:21Z Proc. of ibic2025, Liverpool, UK, 07-11 September 2025 C. Carilli U. Iriso B. Nikolic N. Thyagarajan L. Torino 10.18429/JACoW-IBIC2025-TUPMO09 http://arxiv.org/abs/2607.19976v1 2026-07-22T10:02:52Z

Non-Redundant Aperture Interferometry (NRAI) is a beam characterization technique developed at ALBA in collaboration with radio-astronomy institutes. It enables the single-acquisition measurement of the full 2D transverse profile of the electron beam using visible synchrotron radiation. To better understand the technique limitations and performance, we performed extensive SRW simulations and compare them with experimental data. This paper presents the results of these studies, which define the capabilities and limits of NRAI applied to the current ALBA machine.

2026-07-22T10:02:52Z C. Carilli U. Iriso B. Nikolic N. Thyagarajan L. Torino A. Turull Barot http://arxiv.org/abs/2607.19610v1 2026-07-21T22:26:00Z

An endless radio-frequency (RF) phase shifter is designed using ferroelectric capacitors. An endless phase winds continuously and without bound while every control voltage executes a bounded periodic cycle. A new scheme for an endless RF phase shifter is proposed and studied in the framework of an equivalent circuit. Besides the endless property, this phase shifter offers an exceptionally low insertion-loss, high-speed and high-power capability. The device may perform as an exact frequency translator whose offset is locked to the bias repetition frequency. Optimized realizations are given at 400 and 800 MHz with full conductor-loss accounting: 0.19 and 0.28 dB average insertion loss. A phase advance rate of a few microseconds per turn is limited only by the bias electronics, and power capability on the order of 100 kW may be achieved through stacked-wafer construction. An instantaneous bandwidth of approximately 2.5% is loss-limited rather than mechanism-limited. The design surpasses the best endless phase shifter in the literature, the rotary-field ferrite device, in speed, loss, and power, and improves on the serrodyne ferroelectric frequency translator in efficiency and drive electronics requirements.

2026-07-21T22:26:00Z 6 pages, 4 figures, 3 tables Ilan Ben-Zvi http://arxiv.org/abs/2607.13791v3 2026-07-21T03:46:48Z

Schottky spectra provide key beam diagnostics, with betatron sidebands encoding the fractional tune. Reliable tune measurement is particularly important for third-order resonance slow extraction in compact medical proton synchrotrons, where low signal-to-noise ratios and limited frequency resolution can compromise conventional peak-detection and curve-fitting methods. This work develops two complementary tune estimators with a shared spectral front-end but different temporal representations. The classical estimator coherently pools motion-compensated spectra, detects the sideband using a multi-width matched-filter bank, and performs sub-bin estimation through local argmax and an adaptive MAD-gated centroid. The deep-learning estimator converts each spectrum into a tune-likelihood map using a convolutional neural network with FFT-based global convolutions, then propagates the posterior with a discrete two-dimensional (q,v) Bayesian tracker under a Gaussian motion model while also reporting posterior uncertainty. On a synthetic dynamic-tune benchmark, the deep-learning estimator outperforms published baselines across the operating range, while the classical estimator exceeds the latency-compensated baseline and requires neither training data nor GPU acceleration. On near-stationary SAPT beam data, both methods operate end-to-end, with the deep-learning model requiring no retraining. Median per-frame latency remains below 1 ms on commodity hardware, supporting real-time-capable tune measurement in compact medical synchrotrons.

2026-07-15T12:54:27Z Peihan Sun Manzhou Zhang Renxian Yuan Deming Li Jian Dong http://arxiv.org/abs/2509.08420v3 2026-07-20T11:04:49Z

Strong, symmetrically focusing plasma lenses are promising for accommodating the small beams associated with plasma-based accelerators and collider final foci. However, while focusing with active and passive plasma lenses has been experimentally demonstrated, compatibility with high-brightness beams relevant for applications has not. In this work, we show experimentally that passive plasma lenses can preserve free-electron-laser-quality slice emittance while focusing two orders of magnitude more strongly than quadrupole magnets, and that the focal parameters can be controlled.

2025-09-10T09:06:31Z 11 pages, 7 figures J. Björklund Svensson J. Beinortaitė L. Boulton B. Foster J. M. Garland P. González Caminal M. Huck H. Jones A. Kanekar G. Loisch J. Osterhoff F. Peña S. Schröder M. Thévenet S. Wesch M. Wing J. C. Wood R. D'Arcy 10.1103/jjxz-3fr4 http://arxiv.org/abs/2607.17059v1 2026-07-19T04:03:37Z

Laser-plasma accelerators have been the subject of extensive research in recent years. The electron beams they generate exhibit a broad energy spread. To conveniently characterize beams from laser wakefield acceleration (LWFA), electron spectrometers employing scintillating screens coupled with CCD cameras are typically used. In this work, we calibrate a series of DRZ phosphor screens and measure the spectra of the light they emit. The calibration was performed using the radio-frequency linear electron accelerator at Tsinghua University, which provided monoenergetic electron beams with peak energy of approximately 30 MeV.

2026-07-19T04:03:37Z 5 pages, 4 figures, 2 tables Shuang Liu Bing Zhou Pengwei Huang Tianliang Zhang Bo Peng Shengtai Wei Zhiyuan Guo Bo Guo Fei Li Jianfei Hua Yang Wan Wei Lu http://arxiv.org/abs/2605.19650v4 2026-07-18T10:51:15Z

The P-cubed Target Insertion Device (P$^3$-TID) is a research instrument dedicated to test novel positron source target configurations inside of the proof-of-principle PSI Positron Production (P-cubed or P$^3$) experiment at the Paul Scherrer Institute. The device allows an easy installation, positioning and replacement of different fixed targets. The present article describes its mechanical design at a detailed level.

2026-05-19T10:41:22Z 11 pages, 8 figures, submitted to JINST, updated manuscript following the incorporation of reviewers comments, updated list of authors Ramiro Mena-Andrade Jean-Louis Grenard Kevin Guergar Régis Seidenbinder Maria Ilaria Besana Barbara Humann Giacomo Lavezzari Markus Widorski Anton Lechner Nicolas Vallis Mariia Zykova Dominique Hauenstein Riccardo Zennaro Paolo Craievich Antonio Perillo-Marcone http://arxiv.org/abs/2605.05441v3 2026-07-17T10:06:23Z

Advanced radiotherapy approaches such as FLASH irradiation and spatially fractionated radiotherapy (SFRT) show potential to improve the therapeutic ratio, yet their biological mechanisms and optimal delivery parameters remain uncertain. Progress requires accessible proton research platforms with flexible temporal and spatial dose delivery. We report on the adaptation of the Beam Transfer Line (BTL) of the Bern Medical Cyclotron (BMC) for radiobiology research with FLASH and proton minibeam capabilities. The BMC is optimized for the production of radionuclides for medical imaging, and is able to extract currents up to 150 $ \mathrm{μA}$. The 18 MeV proton beam was passively shaped using collimators, scattering foils, and extended drift space to generate irradiation fields. A dosimetric framework was implemented using an in-beam ionization chamber and radiochromic film with LET-dependent corrections. Beam uniformity and SFRT profiles with various grid spacings were evaluated at realistic target distances. The developed beamline enables stable delivery under controlled conditions in both conventional and FLASH regimes, spanning dose rates from 0.01 to 100 Gy/s. Dose uniformity within a 20 mm radius was below 8\%. Film measurements confirmed the need for LET-dependent corrections and indicated that quantitative dosimetry in in-vitro setups is achievable with appropriate LET corrections. The low proton energy (15.54(12) MeV extracted into air, 8.14(28) MeV delivered to cells in flask) facilitates compact SFRT implementation with well-resolved minibeams. The adapted BMC provides a flexible and accessible platform for systematic pre-clinical proton radiobiology studies under varied dose-rate and spatial delivery conditions. This supports optimization of emerging modalities such as proton FLASH and SFRT and helps bridge accelerator technology and radiobiology.

2026-05-06T20:57:29Z 20 pages, 12 figures, to be submitted to JINST Eva Kasanda Lars Eggiman Thierry Stammbach Pierluigi Casolaro Gaia Dellepiane Alexander Gottstein Jan Gruber Isidre Mateu Paolo Pellicioli Maria Vittoria Rossi Paola Scampoli Cristian Fernandez Palomo Saverio Braccini http://arxiv.org/abs/2607.15788v1 2026-07-17T09:49:38Z

Flying-focus laser pulses can extend the effective interaction length in inverse Compton sources by controlling the trajectory of the focal intensity. Their practical advantage, however, depends on tolerance to shot-to-shot electron--laser alignment and synchronization errors. We develop a semi-analytical model for the shot-averaged total photon yield in head-on inverse Compton scattering of an axisymmetric Gaussian electron bunch with a flying-focus laser pulse. The model includes finite electron-beam emittance, laser diffraction, transverse laser-centroid jitter, longitudinal focus-position jitter, and laser arrival-time jitter at the nominal interaction point. The ensemble averaging over these independent Gaussian errors and the integration over the longitudinal electron and laser coordinates are performed analytically, reducing the overlap problem to a single positive numerical quadrature. This formulation enables rapid evaluation of jitter-robust operating points and provides a compact tool for defining alignment and synchronization tolerances in flying-focus inverse Compton sources.

2026-07-17T09:49:38Z 13 pages, 2 figures S. G. Rykovanov I. Dubinkin M. P. Malakhov A. M. Fedotov A. S. Samsonov I. Yu. Kostyukov http://arxiv.org/abs/2512.03829v2 2026-07-16T22:15:10Z

Reliable operation of high-power proton cyclotrons is a critical requirement for Accelerator Driven Systems (ADS) and other large-scale applications. Beam tuning in such machines is traditionally performed manually, a process that can be slow, non-optimal, and difficult to execute in the presence of faults or changing conditions. To address this, we developed and deployed a machine learning (ML) based tuning framework on the Injector 2 cyclotron at PSI, chosen as an ideal testbed for high-power operation. The system combined a tailored reinforcement learning (RL) algorithm with real-time diagnostics and control, and incorporated accelerator-physics inspired adaptations such as an overshoot strategy that reduced magnetic field settling times by nearly a factor of six. Over an extensive 12-day operational test campaign, relatively long in the context of real-time ML experiments, the RL agent successfully tuned the machine across multiple operating points. For each investigated configuration, stable policies were obtained within a few hours of online training and subsequently demonstrated reliable low-loss operation during overnight evaluation runs. Crucially, the learned policy remained effective when transferred from low-current training to operation at beam currents up to 800 μA, demonstrating robust generalization under appropriately adapted operational constraints. These results constitute the first demonstration of RL-assisted tuning on a high-power cyclotron, with direct relevance to ADS-class drivers.

2025-12-03T14:21:39Z M. Haj Tahar W. Joho E. Solodko M. Bocchio S. Marquie M. Busch A. Barchetti J. Grillenberger J. Snuverink M. Schneider http://arxiv.org/abs/2607.15206v1 2026-07-16T17:02:31Z

The paper considers the effect of degenerate higher-order mode (HOM) interaction, which may lead to the formation of trapped modes with high shunt impedance. Methods for eliminating these modes are discussed.

2026-07-16T17:02:31Z 10 pages, 12 figures Vyacheslav Yakovlev Sergey Belomestnykh Timergali Khabiboulline Andrei Lunin http://arxiv.org/abs/2607.14454v1 2026-07-16T01:04:05Z

All physical quadrupoles have a fringe field falloff, giving rise to intrinsic higher order aberrations. It is especially important to consider these aberrations when designing beamlines with strong, longitudinally cramped optics used to capture and transport large emittance beams. This paper presents relatively simple analytical formulae which describe the fields of quadrupoles including their higher order aberrations for implementation in beamline design. We review the analytic model for quadrupoles described by a $\mathrm{sech}^2$ strength function and subsequently expand it to quadrupoles whose strength function instead follows a tanh function, adding the effective length of the quadrupole as a free parameter. The implementation of these analytic field descriptions in envelope code TRANSOPTR and multi-particle codes GEANT4 and FLUKA is presented using the optics design of the DarkLight experiment at TRIUMF as example.

2026-07-16T01:04:05Z 23 pages, 7 figures Aveen Mahon Laura Miller Ethan Cline Thomas Planche