https://arxiv.org/api/aBMJg6s4+EL5ZPv6+53CZdtxvHk 2026-03-26T09:51:02Z 8723 105 15 http://arxiv.org/abs/2511.02028v2 2026-02-09T01:42:35Z

Motivated by the need to predict plasma density and temperature distributions created in the early stages of high-intensity laser-plasma interactions, we develop a fluid model of plasma expansion into vacuum that incorporates external heating. We propose a new three-parameter family of self-similar solutions for plasma expansion that models a wide range of spatiotemporal variations of the electron temperature. Depending on the relative scales of the heated plasma domain $L$, the Debye length $λ_D$ and an emergent ion-acoustic correlation length $λ_s$, characterized by the parameters $\frac{λ_s}{λ_D}$ and $\frac{L}{λ_s}$, a spectrum of dynamical behaviors for the expanding plasma are identified. The behavior is classified into five dynamical regimes, ranging from nearly quasineutral expansion to the formation of bare ion slabs susceptible to Coulomb explosion. Self-similar solutions with spatially uniform electron temperature with exponential time dependence are analyzed, and the dynamics in the five asymptotic limits in the parameter space are detailed. Scaling relations for the length scales and energies of the expanding plasma are proposed. The self-similar framework is applied to laser-plasma interactions, specifically addressing the plasma dynamics at a target surface as the target interacts with the rising laser intensity envelope. The results offer insights into the expansion behavior based on the laser-plasma parameters, and scaling relations for optimizing laser-plasma schemes and guiding experimental designs in high-intensity laser experiments.

2025-11-03T20:03:48Z 25 pages, 10 figures Ritwik Sain Lance Labun Ou Z. Labun Bjorn Manuel Hegelich http://arxiv.org/abs/2602.07942v1 2026-02-08T12:27:51Z

The properties of radiation from a three-frequency helical undulator are thoroughly investigated. It is shown that such undulators can be employed for generating photons in the so-called composite twisted states -- the states that are linear superpositions of modes with definite projections of the total angular momentum, amplitudes, relative phases, and polarizations. We find the explicit expressions and the selection rules for these parameters and establish that they can be governed in a predictable way by adjusting the parameters of the multifrequency helical undulator. In particular, the phases of three arbitrary modes admissible by selection rules in the composite state with definite energy can be made arbitrary by tuning the phases of one-frequency undulators comprising the three-frequency one. By solving Diophantine equations, we obtain simple expressions for the complex amplitude of coherent state of photons emitted by a three-frequency helical undulator and for the average number of radiated twisted photons in the case when the ratios of frequencies of the three-frequency undulator are rational numbers. The development of resonances and the control of composite states of radiated photons are studied numerically confirming the theoretical conclusions.

2026-02-08T12:27:51Z 17 pp, 2 figs O. V. Bogdanov S. V. Bragin P. O. Kazinski V. A. Ryakin http://arxiv.org/abs/2507.20242v2 2026-02-08T12:22:47Z

The theory of radiation of twisted photons in elliptical multifrequency undulators is developed. It is shown that helical multifrequency undulators can be employed as a bright and versatile source of photons in the states that are superpositions of the modes with definite projection of total angular momentum (TAM), amplitude, and relative phase. All these parameters of the state are readily controlled by the undulator design. The explicit expression for the amplitude of radiation of a twisted photon from a charged particle in the multifrequency undulator is derived. The energy spectrum of radiation and the selection rules for the TAM projection of radiated photons are described. The symmetry properties of the spectrum with respect to the TAM projection are established. The interpretation to the energy spectrum and to the selection rules is given in terms of virtual photons mediating between the charged particle and the undulator. The results obtained are also applicable to radiation of twisted photons produced by ultrarelativistic charged particles moving in plane multifrequency electromagnetic waves.

2025-07-27T11:53:02Z 20 pp, 4 figs Radiation Physics and Chemistry 243, 113701 (2026) O. V. Bogdanov S. V. Bragin P. O. Kazinski V. A. Ryakin 10.1016/j.radphyschem.2026.113701 http://arxiv.org/abs/2602.07858v1 2026-02-08T08:10:56Z

We present a microscopic calculation of spontaneous photon emission by twisted (paraxial) electrons propagating through inhomogeneous, axisymmetric magnetic fields. We construct exact electron states that incorporate transverse mode structure and wavefront curvature by combining the Foldy-Wouthuysen transformation with a geometric framework based on Lewis-Ermakov invariants and metaplectic transformations. We show that the evolution of such structured states corresponds to an open path in the space of quadratic forms, giving rise to a geometric contribution to the emission amplitude that cannot be eliminated by gauge choice or adiabatic arguments. The inverse radius of curvature of the electron wavefront emerges as an effective geometric field that enables radiation even in regions where the external magnetic field vanishes locally. This mechanism generalizes Landau-level radiation to nonasymptotic, structured electron states and establishes a direct connection between noncyclic geometric evolution and photon emission.

2026-02-08T08:10:56Z 8 pages 2 figures M. S. Epov I. E. Shenderovich S. S. Baturin http://arxiv.org/abs/2512.11290v3 2026-02-07T05:36:17Z

This Letter uncovers five distinct charge transport modes and their transitions in dual-energy electron beam diodes. We via first-principle particle-in-cell (PIC) simulations establish that the specific mode (e.g., space charge oscillations) and the current transport characteristics are essentially governed by the interplay between the electron beam energy and injected current density. A generalized analysis is conducted for n-component electron beams, and a theoretical piecewise function is for the transmitted current density proposed, which agrees well with the PIC results under designed conditions. The discovery provides a mechanistic picture of multiple electron beam transport in diodes, paving the way for novel designs of high-performance modern vacuum electronic devices.

2025-12-12T05:34:30Z Chubin Lin Jiandong Chen Huihui Wang Yangyang Fu http://arxiv.org/abs/2602.06483v1 2026-02-06T08:21:49Z

Synchronization is a fundamental phenomenon in dynamical systems, occurring in a wide range of contexts such as mechanical, chemical, biological, and social systems. In this work, we explore a novel manifestation of synchronization in accelerator-based light sources, specifically in storage rings where relativistic electron bunches circulate and emit synchrotron radiation, used for user experiments. In such systems, a systematic spatio-temporal instability arises when the bunch contains a large number of electrons. This instability is characterized by the spontaneous formation of microstructures within the bunch, which appear with a bursting behavior. We demonstrate that these bursting events can be synchronized with an external sinusoidal signal by modulating the electric field in a radiofrequency (RF) cavity. This external modulation induces typical synchronization features such as Arnold tongues at fundamental, harmonic, and subharmonic frequencies of the natural bursting rate, as well as phase-slip phenomena near the synchronization threshold. The synchronization mechanism is analyzed using numerical simulations based on the Vlasov-Fokker-Planck equation, and a proof-of-principle experiment is conducted at the SOLEIL synchrotron facility.

2026-02-06T08:21:49Z C. Evain A. -A. Diallo E. Roussel C. Szwaj M. Herda M. -A. Tordeux F. Ribeiro M. Labat N. Hubert J. -B. Brubach P. Roy S. Bielawski http://arxiv.org/abs/2602.05782v1 2026-02-05T15:39:17Z

First, we describe vacuum brazing and vacuum soldering. Then, we demonstrate how vacuum assists in reducing specific metal oxides, significantly enhancing the wetting of the braze material. Examples of metal-to-metal brazing and soldering are provided. The brazing of large accelerating cavities, specifically Radio Frequency Quadrupoles (RFQ), is then explained in more detail to present a comprehensive procedure tailored for high-precision, large-scale assemblies. Finally, we discuss the process of brazing ceramics using both techniques: with metallisation and with active brazing alloy.

2026-02-05T15:39:17Z 14 pages, contribution to the CAS - CERN Accelerator School: Mechanical & Materials Engineering for Particle Accelerators and Detectors, 2-15 June 2024, Sint-Michielsgestel, Netherlands Serge Mathot http://arxiv.org/abs/2512.20356v2 2026-02-05T10:43:15Z

Inverse Compton scattering (ICS) is a promising method for generating coherent and tunable x-rays in a compact setup. In this paper, we present a theoretical framework describing the output of an ICS x-ray source for arbitrary interaction angles between pulsed electron and laser beams. This allows for analytic optimization of the x-ray beam properties by varying the parameters defining the geometry. In general, different x-ray applications require optimization of different x-ray beam properties, such as energy spread for x-ray spectroscopy and angular spread for x-ray scattering measurements. In this paper, we restrict ourselves to optimization of the x-ray brilliance, which is a comprehensive figure of merit for x-ray beam quality. We investigate two specific ICS interaction geometries in particular: head-on scattering of a laser beam off an electron beam; and scattering of a laser beam off an electron beam in a co-propagating geometry, interacting under a grazing angle. For head-on scattering we show that a tightly focused, cylindrically symmetric laser pulse, which balances laser intensity and interaction time, optimizes the x-ray brilliance. For a co-propagating, grazing angle geometry, an elliptical focus of the laser pulse is required to mitigate the effect of a reduced interaction time. We find that the latter geometry is especially useful for soft x-ray generation.

2025-12-23T13:37:11Z C. W. Sweers O. J. Luiten http://arxiv.org/abs/2602.05530v1 2026-02-05T10:42:58Z

In this lecture we discuss the intensity limitations in hadron LINACs. First, we will detail what are the two main meanings of intensity limitations as they differ substantially between high power LINACs and high brightness LINACs. Then we will illustrate in detail the building blocks of hadron linacs focusing on the beam dynamics. We will conclude with few examples of intensity limitations and their mitigations.

2026-02-05T10:42:58Z 16 pages, contribution to the CAS - CERN Accelerator School: Intensity Limitations in Hadron Beams, 15 - 27 June 2025, Borovets, Bulgaria Alessandra Lombardi http://arxiv.org/abs/2602.05518v1 2026-02-05T10:23:36Z

A proof of principle experiment of Three-dimensional spiral beam injection scheme has been carried out. This injection scheme requires a strongly x-y coupled beam to meet magnetic field distribution through solenoid magnet fringe field. In this paper, we introduce outline of experimental setup, results of x-y coupling adjustment with DC electron beam of 80 keV. The results of this experiment will be evaluated and improvements for actual operation will be discussed.

2026-02-05T10:23:36Z 25 pages, 34 figures. Submitted to Phys. Rev. Accel. Beams Hiromi Iinuma Ryota Matsushita Muhammad Abdul Rehman Hisayoshi Nakayama Satoshi Ohsawa Kazuro Furukawa http://arxiv.org/abs/2503.20904v4 2026-02-04T12:24:03Z

We report on experimental evidence of the generation of directional muons from a laser-wakefield accelerator driven by a PW-class laser. The muons were generated following the interaction of a GeV-scale high-charge electron beam with a 2cm-thick Pb target and were detected using a Timepix3 detector placed behind a suitable shielding configuration. Data analysis indicates a $(99.1\pm0.5)$% confidence of muon detection over noise, in excellent agreement with numerical modelling. Extrapolation of the experimental setup to higher electron energies and charges suggests the potential to guide and separate from noise approximately $10^4$ muons/s onto cm$^2$-scale areas for applications using a 10 Hz PW laser. These results demonstrate the possibility of generating and transporting directional muon beams using high-power lasers and establish a foundation for the systematic application of laser-driven high-energy muon beams.

2025-03-26T18:19:07Z 18 pages, 8 figures L. Calvin E. Gerstmayr C. Arran L. Tudor T. Foster K. Fleck B. Bergmann D. Doria B. Kettle H. Maguire V. Malka P. Manek S. P. D. Mangles P. McKenna R. E. Mihai S. Popa C. Ridgers J. Sarma P. Smolyanskiy R. Wilson R. M. Deas G. Sarri http://arxiv.org/abs/2508.02894v2 2026-02-03T20:40:13Z

We deposited Nb3Sn film on the inner surface of a 2.6 GHz Nb superconducting radiofrequency (SRF) cavity by co-sputtering using a composite of Nb and Sn tube targets in a DC cylindrical magnetron sputtering system, followed by thermal annealing of the coated cavity. An aluminum mockup cavity, replicating a 2.6 GHz Nb SRF cavity geometry, was utilized to optimize deposition parameters, resulting in co-sputtered Nb-Sn films with Sn content of 32 - 42 at. % on the beam tubes and equator positions. Several annealing conditions were investigated to improve the surface homogeneity of the Nb3Sn film. The best co-sputtered Nb-Sn film was achieved after annealing at 600 C for 6 h, followed by annealing at 950 C for 1 h. The best process was applied to a Nb cavity, which was RF tested in a cryogenic dewar. RF testing of the Nb3Sn-coated cavity demonstrated a superconducting transition temperature (Tc) close to the highest reported, at 17.78 K. The Nb3Sn cavity underwent a light Sn recoating process, followed by additional RF testing, resulting in enhancement of the RF performance, primarily due to improved surface homogeneity of the Nb3Sn coating.

2025-08-04T20:46:17Z Md Sharifuzzaman Shakel Grigory V. Eremeev Anne-Marie Valente-Feliciano Uttar Pudasaini Hani E. Elsayed-Ali http://arxiv.org/abs/2602.03754v1 2026-02-03T17:17:41Z

Plasma wakefield acceleration is a groundbreaking technique for accelerating particles, capable of sustaining gigavolt-per-meter accelerating fields. Understanding the physical mechanisms governing the recovery of plasma accelerating properties over time is essential for successfully achieving high-repetition-rate plasma acceleration, a key requirement for applicability in both research and commercial settings. In this paper, we present numerical simulations of the early-stage plasma evolution based on the parameters of the SPARC_LAB hydrogen plasma recovery time experiment (Pompili et al., Comm. Phys. 7, 241 (2024)), employing spatially resolved Particle-in-Cell and fluid models. The experiment reports on a non-monotonic dependence of the plasma recovery time on the initial plasma density, an effect for which ion motion has been invoked as a contributing factor. The simulations presented here provide further insight into the role of ion dynamics in shaping this behavior. Furthermore, comparing Particle-in-Cell and fluid approaches allows us to assess the quality of fluid models for describing this class of plasma dynamics.

2026-02-03T17:17:41Z G. Parise A. Cianchi M. Galletti F. Guglietta R. Pompili A. R. Rossi M. Sbragaglia D. Simeoni http://arxiv.org/abs/2601.15818v2 2026-02-03T11:59:31Z

Advances in accelerator technology have led to significant improvements in the quality of muon beams over the past decades. Investigations of the muon and muonium enable precise measurements of fundamental constants, as well as searches for new physics beyond the Standard Model. Furthermore, by utilizing muon beams with high intensity and polarization, studies of the dynamics of the muon and muonium within atomic level can offer valuable insights into materials science. This review presents recent progress and prospects at the frontiers of muon beams and high-precision muonium physics. It also provides an overview of novel methods and detection techniques to achieve high sensitivities in different areas, including particle physics, nuclear physics, materials science and beyond.

2026-01-22T10:05:19Z 85 pages, 31 figures, 3 tables. Review article: comments are welcome Siyuan Chen Mingchen Sun Jian Tang http://arxiv.org/abs/2602.03270v1 2026-02-03T08:56:15Z

This paper recalls the principles of the finite-element methods (FEM) theory and declines its application in the EN-MME group, for the numerical modelling and study of particle accelerator equipment. Implicit and explicit methods are compared, and practical examples of their use are given.

2026-02-03T08:56:15Z 15 pages, contribution to the CAS - CERN Accelerator School: Mechanical & Materials Engineering for Particle Accelerators and Detectors, 2-15 June 2024, Sint-Michielsgestel, Netherlands Federico Carra Giuditta Coladonato Audrey Piccini Joanna Sylwia Swieszek Nikolina Vejnovic