https://arxiv.org/api/5Mm/sMfAZq1bPc+AU7+zV/xyAs4 2026-11-12T03:35:31Z 9142 0 15 http://arxiv.org/abs/2511.20417v3 2026-11-10T15:45:24Z

In anticipation of the completion of the High-Luminosity Large Hadron Collider (HL-LHC) programme by the end of 2041, CERN is preparing to launch a new major facility in the mid-2040s. According to the 2020 update of the European Strategy for Particle Physics (ESPP), the highest-priority next collider is an electron-positron Higgs factory, followed in the longer term by a hadron-hadron collider at the highest achievable energy. The CERN directorate established a Future Colliders Comparative Evaluation working group in June 2023. This group brings together project leaders and domain experts to conduct a consistent evaluation of the Future Circular Collider (FCC) and alternative scenarios based on shared assumptions and standardized criteria. This report presents a comparative evaluation of proposed future collider projects submitted as input for the Update of the European Strategy for Particle Physics. These proposals are compared considering main performance parameters, environmental impact and sustainability, technical maturity, cost of construction and operation, required human resources, and realistic implementation timelines. An overview of the international collider projects within a similar timeframe, notably the CEPC in China and the ILC in Japan is also presented, as well as a short review of the status and prospects of new accelerator techniques.

2025-11-25T15:41:09Z 86 pages, 10 figures. Report from the Future Colliders Comparative Evaluation Working Group. Input to the European Strategy for Particle Physics (2026 Update), ID 281 - see https://indico.cern.ch/event/1439855/contributions/6542430/ Comparative evaluation of future collider options, Future Colliders Comparative Evaluation Working Group. CERN Yellow Reports: Monographs, CERN-2025-011 (CERN, Geneva, 2025) G. Arduini CERN, Geneva, Switzerland M. Benedikt CERN, Geneva, Switzerland F. Gianotti CERN, Geneva, Switzerland K. Jakobs Universität Freiburg, Germany M. Lamont CERN, Geneva, Switzerland R. Losito CERN, Geneva, Switzerland M. Meddahi CERN, Geneva, Switzerland J. Mnich CERN, Geneva, Switzerland N. Mounet CERN, Geneva, Switzerland D. Schulte CERN, Geneva, Switzerland F. Sonnemann CERN, Geneva, Switzerland S. Stapnes CERN, Geneva, Switzerland F. Zimmermann 10.23731/CYRM-2025-0011 http://arxiv.org/abs/2609.23823v3 2026-11-10T09:41:05Z

The flux of protons slow-extracted from the CERN Super Proton Synchrotron (SPS) to the North Area experiments is limited by the induced radioactivity of the beam lost on the electrostatic septum during third-integer resonant extraction. Crystal shadowing, in which a thin bent silicon crystal deflects the protons that would otherwise hit the septum wires, has been in operation at the SPS since 2021; a single crystal at a non-local position halved the extraction losses relative to the local crystal alone, short of the fourfold reduction that future high-intensity operation requires. In this paper, the design, deployment and operation of a 3-crystal Multi-Volume Reflection Array (MVRA) at the non-local position in the fourth long straight section (LSS4) are presented. The array geometry was designed by Multi-Fidelity Bayesian Optimization (MFBO), combining a multilayer-perceptron surrogate with full particle tracking; it predicts a fourfold loss reduction with three crystals and up to tenfold with an ideally aligned array of four to five. At its optimum the as-built array reaches, and at its best point exceeds, the predicted factor of four, and beam dynamics simulations matched to the measured position and angle scans reproduce their shape to within 0.04 of the crystals-retracted loss. In physics production an extremum-seeking controller has held the array on its operating plateau, with a median loss reduction by a factor of 3.6 over 1.14 x 10^5 extraction cycles relative to the pre-shadowing baseline. The remaining margin to the target, the limitations of the present installation and the upgrade to a 4- or 5-crystal array are discussed.

2026-09-20T19:19:28Z 23 pages, 14 figures, 8 tables F. M. Velotti CERN, Geneva, Switzerland M. Bay CERN, Geneva, Switzerland T. Calvet CERN, Geneva, Switzerland M. Calviani CERN, Geneva, Switzerland G. Daher CERN, Geneva, Switzerland L. S. Esposito CERN, Geneva, Switzerland M. A. Fraser CERN, Geneva, Switzerland B. Goddard CERN, Geneva, Switzerland M. Howes CERN, Geneva, Switzerland V. Kain CERN, Geneva, Switzerland E. Matheson CERN, Geneva, Switzerland A. Perillo Marcone CERN, Geneva, Switzerland R. Seidenbinder CERN, Geneva, Switzerland http://arxiv.org/abs/2501.09916v4 2026-11-10T08:17:27Z

Despite the successful demonstration of compact free electron lasers (FELs) driven by laser wakefield accelerators (LWFAs), the pursuit of further enhancements in high-gain compact FELs presents a challenge due to the limitations in electron beam quality. In this work, we pinpoint the pivotal physics and optimization strategies for high-quality single-stage LWFAs that are crucial for high-gain FELs. We have delved into the synergistic injection mechanism, where the self-evolution injection threshold is far from reached at the injection position, with both the shock front and self-evolution of the laser playing a role in the injection process. A thorough discussion has been provided on the beam-quality degradation and optimization strategies, in terms of global (slice) energy spread and projected (slice) emittance. With the goal of achieving high-gain FELs driven by LWFAs, we have also explored the synthesis quality of the electron beam to determine an optimized power gain length. A comprehensive start-to-end simulation has been conducted, demonstrating the effectiveness of compact FELs powered by these high-quality electron beams. The resulting radiation reaches the saturation regime after a 4.5-meter-long undulator, with an energy of 17.4 μJ and a power of 6.0 GW at a wavelength of 23.9 nm. This proposed scheme offers not only a framework for optimizing beam quality in LWFAs, but also a promising path for future compact LWFA-driven FELs to achieve saturated regimes, opening up new possibilities for widespread applications.

2025-01-17T02:15:27Z 17 pages,14 figures Ke Feng Kangnan Jiang Runshu Hu Chen Lv Xizhuan Chen Hai Jiang Shixia Luan Wentao Wang Ruxin Li http://arxiv.org/abs/2611.13436v1 2026-11-10T01:18:43Z

Accelerated particle beams are essential tools of modern science and technology with applications ranging from medicine [1], to light sources [2], to high-energy physics [3]. Over time, as accelerator-based experiments become more sophisticated and probe natural phenomena with greater temporal resolution, there is an increasing demand on beam parameters, in particular on bunch duration. Experiments have been proposed that require beams with 1-2 orders of magnitude shorter durations than what is possible with current state-of-the-art technology. However, state-of-the-art temporal bunch compressors force a trade-off between how short an electron bunch can be made and how well its transverse quality survives the strong bending magnets required to do so -- a limitation that stands as a grand challenge for accelerator physics to-date [4]. In this experiment, we demonstrate a new, compact compression technique for generating ultrashort, high-peak-current electron bunches that circumvents this trade-off using plasma wakefield acceleration. Just as chirped pulse amplification unlocked ultrashort, high-power laser pulses and the technologies that followed from them, here we demonstrate an analogous chirp-and-compress strategy applied to relativistic electron beams by using the extreme electric fields of a plasma wakefield in place of a stretcher-amplifier, thereby unlocking the path to ultrashort, extremely high-current electron beams. We demonstrate the first application of this plasma-compressed bunch using it to drive single-microbunch free electron lasing at optical wavelengths in a single, meter-scale undulator module, producing radiation pulses roughly four orders of magnitude more energetic than the first beam-driven, plasma-based free electron laser demonstration at the same accelerator facility [5, 6].

2026-11-10T01:18:43Z Rafi Hessami Kelly K Swanson Mario Galletti Livio Verra Angelo Biagioni Lucio Crincoli Mariano Carpanese Martina Del Giorno Francesco Demurtas Giacomo Griseri Valerio Lollo Michele Opromolla Federico Nguyen Gianmarco Parise Alberto Petralia Gilles J Silvi Federica Stocchi Marco Zottola Agostino Marinelli Riccardo Pompili Claudio Emma http://arxiv.org/abs/2608.08551v2 2026-11-09T22:50:05Z

A breakthrough in fundamental physics experiments measuring particle spin precession may happen if spin-transparent storage rings become adopted tools for such experiments. We present a new design of highly specialized table-sized storage rings, which use low-energy polarized electron beams and Mott polarimetry. Based on the spin transparency ansatz, the spin precession stemming from the magnetic dipole moment is canceled at any beam energy after an electron's turn along the periodic orbit in the ring. Meanwhile, a spin precession induced by the fundamental physics of interest, e.g., the electron's permanent electric dipole moment (EDM) and/or ultralight-dark-matter-mediated forces such as axions, will accumulate. However, capitalizing on such types of rings is not only desirable for measurements of EDMs and axion searches relevant to $CP$ violation and matter-antimatter asymmetry in the Universe, but may also find very promising applications in quantum computing.

2026-08-09T07:52:28Z 31 pages, 5 figures, 3 tables Vladimir Khachatryan Bill Riad Suleiman Bill Alberto Accardi Bill Kurt Aulenbacher Bill Carlos Ayerbe Gayoso Bill Marco Battaglieri Bill Devesh Bhattarai Bill Silviu Covrig Dusa Bill Yaroslav Derbenev Bill Forrest Friesen Bill Eric Fuchey Bill Joseph Grames Bill Paul Guèye Bill Tyler J. Hague Bill Ching Him Leung Bill Wenliang Bill Li Magno V. T. Machado Preet Mann Vasiliy Morozov Son Nguyen Michael Nycz Howard Oh Udit Raha Mario Reig Marco Schreck Nathaniel Sherrill Ye Tian Zakia Tithi Alexandre Vieira Erik Wrightson Zichen Yin http://arxiv.org/abs/2611.12397v1 2026-11-09T13:33:11Z

Combining the high peak brilliance and short pulse duration of free-electron lasers (FELs) with the high repetition rate of diffraction-limited storage rings (DLSRs) is a promising direction for accelerator light sources. In this paper, we propose a dual-ring light source concept that, at MHz repetition rates, delivers pulses with a pulse durations and peak power intermediate between those of FELs and DLSRs. Such a light source can be realized as an upgrade of an existing DLSR by adding an isochronous ring equipped with transverse gradient undulators (TGUs) and connecting the two rings via bunch compression and decompression systems. We present the conceptual layout and show that bunch compression shortens the electron bunches to ps-scale durations; multi-turn radiation in the isochronous ring raises the repetition rate to 1.36 MHz from a single TGU; and the long TGUs enhance the brilliance, delivering $10^{7}$--$10^{9}$ photons per pulse across the soft and hard X-ray range, an increase of 2--4 orders of magnitude over the original DLSR. The dual-ring light source thus provides a cost-effective route to MHz FEL operation based on existing storage-ring infrastructure, combining the high repetition rate of a DLSR with the short pulses and high brilliance of a linac-driven FEL.

2026-11-09T13:33:11Z 18 figures Fancong Zeng Yi Jiao Weihang Liu Yu Zhao Weilun Qin http://arxiv.org/abs/2611.12388v1 2026-11-09T13:28:38Z

In this lecture, dealing with intensity effects, the equations of longitudinal motion with induced beam voltage are analyzed. This allows us, first, to describe the single-bunch potential well distortion and the loss of Landau damping. Then the linearized Vlasov equation is used to derive step-by-step the Lebedev equation. This matrix equation is then applied to find the thresholds, growth rates and spectra of an unstable multi-bunch beam. The lecture is concluded by a discussion of possible beam-instability cures.

2026-11-09T13:28:38Z 27 pages, 14 figures, contribution to the CAS - CERN Accelerator School: RF for Accelerators, 18 June - 01 July 2023, Berlin, Germany Elena Shaposhnikova http://arxiv.org/abs/2611.12381v1 2026-11-09T13:20:34Z

In the first part of this lecture, the main characteristics of synchrotron motion, namely, synchronous particle and phase, bucket area and emittance, are introduced. The equations of longitudinal particle motion in a single rf system of a proton synchrotron are rederived and the phase equation is analyzed for small and large amplitude particles. The particle motion below and above transition energy is also considered. The main applications and operation modes of a double rf system are discussed in the second part of the lecture. The intensity effects and beam instabilities are the subject of the following lecture.

2026-11-09T13:20:34Z 13 pages, 6 figures, contribution to the CAS - CERN Accelerator School: RF for Accelerators, 18 June - 01 July 2023, Berlin, Germany Elena Shaposhnikova http://arxiv.org/abs/2611.12265v1 2026-11-09T11:52:08Z

Beam-beam electromagnetic interactions affect the luminosity, collision energy, polarization, and particle backgrounds relevant to precision measurements at electron-positron colliders. We investigate these effects using Fast $e^{\pm}e^{\pm}$ Beam and Luminosity (FeeBL), a new beam-beam simulation framework, and compare its predictions with published results from LEP and proposed future colliders. We reproduce the analytical field-integration calculations of LEP Bhabha scattering and identify an approximately 2% bias in previously published beam-deflection simulations. Applying the corresponding luminosity correction and a revised uncertainty assessment motivated by the observed agreement among the four LEP experiments yields ($N_ν= 2.9965 \pm 0.0040$), compared with the previously reported ($2.9963 \pm 0.0074$). The revised uncertainty is conditional on an assumed common rescaling of experiment specific uncertainties and motivates further investigation of the original uncertainty budgets. We identify and correct implementation errors in the modeling of Breit-Wheeler, Bethe-Heitler, and Landau-Lifshitz pair production, with implications for detector backgrounds at Higgs factories. Simulated beam depolarization and luminosity spectra are compared with existing ILC and HALHF predictions. Finally, we investigate collision energy monochromatization for direct Higgs production, obtaining sub-MeV collision energy peak widths in exploratory linear collider configurations at substantial luminosity cost, while finding significantly weaker narrowing for the FCC-ee configurations studied. We derive a rigid Gaussian beam overlap model and estimate that FCC-ee needs roughly 10 m of horizontal only dispersion to reach widths of $\approx1~\mathrm{MeV}$.

2026-11-09T11:52:08Z 40 pages, 14 figures, 18 tables, pre-print for reference at LCWS2026 Brendon Madison http://arxiv.org/abs/2605.05505v3 2026-11-09T08:57:18Z

Bulk niobium has long been the material of choice for superconducting radio-frequency applications. An alternative approach is the superconductor-insulator-superconductor multilayer structure, which enables the use of brittle high-$T_c$ materials such as NbTiN. At present, SIS coatings are limited to flat samples, with the single-cell TESLA cavity representing a key milestone. Extending coating processes to non-flat geometries is expected to introduce macroscopic inhomogeneities in coating thickness. We model these variations using Gaussian random fields parametrized by a length scale, and generated by solving a stochastic partial differential equation. The resulting field is incorporated into the boundary condition of the cavity eigenvalue problem, from which quantities of interest -- such as resonant frequency and quality factor -- are computed. This procedure is repeated for eight length scales, with \num{2048} samples per length scale, where the resulting quality factors are recorded. Our results show that the quality factors follow a normal distribution. The standard deviation increases with the length scale and can be statistically distinguished. In contrast, the mean values remain largely unchanged, with only a few significant differences. In extreme cases, depending on the length scale, the quality factor may differ from the uniform case by \SIrange{2}{6}{\percent}.

2026-05-06T23:03:02Z Phys. Rev. Accel. Beams 29, 103802 (2026) Aaron Gobeyn Wolfgang Ackermann Herbert De Gersem 10.1103/hjqj-v5yc http://arxiv.org/abs/2611.11061v1 2026-11-08T01:26:19Z

In conditioned generative models of physical systems, the densities at different values of the conditioning parameters are often related through symplectic transformations. For stable linear Hamiltonian systems, there exists a symplectic transformation to "normal coordinates" such that the dynamics is reduced to rotations in each phase-space plane. This picture extends to the nonlinear case where, away from resonances, the Birkhoff normal form again consists of rotations in phase space, now with amplitude dependence. In this work, we introduce an invertible symplectic flow layer consisting of amplitude-dependent rotations in learned normal coordinates. We derive the condition under which the nonlinear rotation layer is symplectic and detail an architecture that guarantees it. Experiments are carried out on three conditional generative modeling problems: a synthetic chain of coupled nonlinear oscillators and two problems from accelerator physics. We show empirically that normalizing flows with the new layers achieve competitive or superior negative log-likelihoods compared to baseline flows, with gains that grow with the strength of the nonlinearity on the synthetic system.

2026-11-08T01:26:19Z Accepted at NeurIPS 2026. 10 pages, 6 figures plus appendices. Code: https://github.com/electronsandstuff/Normal-Coordinates-Flow Christopher M. Pierce http://arxiv.org/abs/2611.10835v1 2026-11-07T16:27:14Z

The increasing complexity of particle accelerators and the growing demand for operational efficiency have intensified the focus on automation in accelerator control systems. However, there is still a lack of a common language to describe and compare the level of automation across different facilities. This article presents a generic classification scheme for accelerator automation, defining five distinct levels ranging from basic operational assistance to full autonomy. To assess the current state of automation in the accelerator community, a structured survey was conducted during the 14th Workshop on Accelerator Operations (WAO 2025). Responses from major laboratories indicate that more than one third of accelerators currently operate at the lowest level 1 (operational assistance), and no facility has yet reached full automation. However, projections show a clear trend toward higher levels within the next decade. Key drivers include optimization algorithms for autotuning, finite-state machines, and closed-loop feedback systems. This study provides both a conceptual framework and a snapshot of current implementation practices, supporting a shared understanding of accelerator automation across the community.

2026-11-07T16:27:14Z 4 pages, 5 figures. Contribution to IPAC'26, Deauville, France, 17-22 May 2026, paper WEP6099 S. Reimann F. Miyahara M. Lafky P. Schuh J. Xing G. Johns R. Steerenberg B. Freeman K. Genge M. Pont G. Marr Y. Iwata L. Hardy http://arxiv.org/abs/2511.17141v2 2026-11-07T16:14:37Z

Here, we demonstrate and investigate how Distributed Acoustic Sensing (DAS) can be utilized on research campuses and in large scientific infrastructures to study environmental vibrations and reduce their impact on high-precision experiments. We first discuss the potential of DAS in the context of particle accelerators, gravitational wave detection experiments and research campuses. Next, we present the results of our seismic measurement campaign conducted with our proto-network, which involved the probing of over 12 km of fiber, in May 2021. This campaign was conducted by the Hamburg WAVE initiative in Science City Hamburg Bahrenfeld and included DESY, the European XFEL, PETRA III and the University of Hamburg. Our proto-network confirms the ability to observe natural, anthropogenic, and infrastructural vibrations and how and where these couple into different parts of the heterogeneously set up fiber network. We also present results on a study of noise and motion coupling aspects of DAS probing double-redundant fiber loops in a unique environment, the European XFEL. Our results show that DAS can greatly benefit research campuses and large scientific infrastructures and they highlight the opportunities and challenges of implementing and operating such seismic networks.

2025-11-21T11:04:48Z 14 pages, 6 figures Oliver Bölt Luigia Cristiano Sandy Croatto Dirk Gajewski Erik Genthe Oliver Gerberding Céline Hadziioannou Conny Hammer Markus Hoffmann Katharina-Sophie Isleif Antonia Kiel Charlotte M. Krawczyk Regina Maass Ingra Barbosa Norbert Meyners Reinhardt Rading Holger Schlarb Roman Schnabel Wanda Vossius Christopher Wollin http://arxiv.org/abs/2611.10476v1 2026-11-07T05:00:46Z

The Advanced Light Source (ALS) LINAC operates with 3 GHz RF pulses at 0.7 Hz pulse repetition frequency (PRF) and 1.2 microsecond duration, imposing severe limitations on traditional PID and adaptive feedforward control schemes. An RFSoC-based controller prototype was developed and presented in prior work to upgrade the legacy LLRF systems for the LINAC and Subharmonic Buncher. This paper presents sampling scheme optimizations and interleaving calibration techniques for RFSoC based control of pulsed RF systems. We detail bench characterization methodologies to isolate component-level phase noise across individual ADC, DAC, and clock components in the Xilinx ZCU208 hardware ecosystem. Finally, we explore translating open-loop controller bench measurements into controller-added closed-loop LLRF performance predictions.

2026-11-07T05:00:46Z Victoria Moore Qiang Du Shreeharshini Murthy Michael Chin Angel Jurado Benjamin Flugstad http://arxiv.org/abs/2611.09541v1 2026-11-06T14:51:37Z

We report a 2025 beam test at ELBA, the multi-GeV laser wakefield accelerator at ELI Beamlines, using a Resistive Plate Chamber (RPC) telescope with an active area of 16 * 16 cm2. The portable design sup- ports autonomous operation in challenging environments. Previous cosmic-ray measurements established its tracking capability for muography. During the campaign at ELBA, 30 f s long, 0.5 PW laser pulses in- teracted with a plasma target at a 0.2 Hz repetition rate, where a tungsten converter upstream of the beam dump enhanced muon production. This was the first deployment of an RPC telescope in a high-power laser environment. The detector remained operational in the presence of radiation and electromagnetic interference. Although parasitic running and limited statistics prevented definitive identification of beam- induced muons, the measurements offered insight into background activity and showed evidence of re- constructed tracks. They establish the feasibility of a dedicated campaign with controlled beam conditions and improved muon sensitivity. This contribution forms part of the International Muography Workshop 2026 proceedings.

2026-11-06T14:51:37Z S. Ikram D. Ahmadi U. Chaulagain A. Cimmino E. Cortina Gil P. Demin A. Giammanco G. M. Grittani M. Lagrange M. Nevrkla J. Sisma M. Tytgat R. Versaci F. Vitha