Orbital angular momentum in the pion and kaon: rest-frame and light-front

2026-03-14T03:20:47Z

Orbital angular momentum (OAM) is not a Poincaré invariant quantity; so, its value is observer dependent. Notwithstanding that, in quantum chromodynamics, a Poincaré-invariant theory, OAM is part of every hadron wave function. Using continuum Schwinger function methods, we elucidate both the subjective character of in-hadron OAM and expose some of its impacts on pion and kaon structure and observables. For instance, working with light-front projections of their Bethe-Salpeter wave functions, it is found that the pion is a roughly 50/50 mix of light-front OAM zero and one components and the kaon is a 60/40 system. The overall picture is that (near) Nambu-Goldstone modes are complex bound states, each with significant intrinsic OAM, independent of the observer's reference frame. This feature must be accounted for in the calculation of observables. Inductively, the same is true for all hadrons.

Calibration of an Irradiated Prototype for the EIC Zero-Degree Calorimeter

2026-03-13T22:26:40Z

We study the response of a prototype Zero-Degree Calorimeter (ZDC) detector to irradiation equivalent to 10$^{11}$ 1-MeV protons/cm$^2$, which matches the expected exposure after one year of operation at full nominal luminosity at the future Electron-Ion Collider (EIC). The prototype consists of 563 channels and represents about 10 percent of the final ZDC design in terms of both channel count and detector volume. It was irradiated at the NASA Space Radiation Laboratory (NSRL) at Brookhaven National Laboratory (BNL) with a dose equivalent to 10$^{11}$ protons/cm$^2$. We demonstrate that, despite significant radiation damage to the SiPMs and non-uniform degradation across the detector volume, the detector can be successfully calibrated on a channel-by-channel basis using cosmic-ray data. The damage profile, similar to what is expected in the experiment, varies by an order of magnitude or more across the detector. Even for the most heavily damaged channels, the signal-to-noise ratio for a MIP signal remains above 5. This study provides a realistic test of the system's performance under irradiation. It complements previous SiPM-specific irradiation studies and will inform the future operation of the ZDC and other detectors that use SiPM-on-tile technology.

Measurement of Proton-Induced Reactions on Lanthanum from 55--200 MeV by Stacked-Foil Activation

2026-03-13T22:23:05Z

Cerium-134 is an isotope desired for applications as a chemical analogue to the promising therapeutic radionuclide $^{225}$Ac, for use in bio-distribution assays as an in vivo generator of the short-lived positron-emitting isotope $^{134}$La. In the 50-100 MeV energy range relevant to the production of $^{134}$Ce by means of high-energy proton bombardment of lanthanum, existing cross section data are discrepant and have gaps at important energies. To address these deficiencies, a series of 17 $^{139}$La foils (99.919% natural abundance) were irradiated in two stacked-target experiments: one at the LANL's Isotope Production Facility with an incident proton energy of 100 MeV, and a second at BNL's Brookhaven Linac Isotope Producer with an incident proton energy of 200 MeV - a complete energy range spanning approximately 55-200 MeV. Cross sections are reported for 30 products of $^{139}$La(p,x) reactions (representing up to 55% of the total non-elastic cross section), in addition to 24 residual products measured in the $^{nat}$Cu and $^{nat}$Ti foils that were used as proton flux monitors. The measured production cross sections for $^{139}$La reactions were compared to literature data as well as default calculations from the nuclear reaction modeling codes TALYS, EMPIRE and ALICE, as well as the TENDL-2023 library. The default calculations typically exhibited poor predictive capability, due to the complexity of multiple interacting physics models in this energy range, and deficiencies in preequilibrium reaction modeling. Building upon previous efforts to evaluate proton-induced reactions in this energy range, a parameter adjustment procedure was performed upon the optical model and the two-component exciton model using the TALYS-2.0 code. This resulted in an improvement in $^{139}$La(p,x) cross sections for applications including isotope production, over default predictions.

Direct Experiments of Neutron Capture on Stable and Unstable Isotopes for Stellar Nucleosynthesis Studies

2026-03-13T19:24:07Z

Neutron-capture reactions provide essential nuclear-physics input for modeling the synthesis of heavy elements in stars. The growing precision of stellar spectroscopy and isotopic measurements in presolar SiC grains now demands cross sections with improved accuracy over the full energy range, and access to unstable nuclei relevant to slow (s-) process branchings and the intermediate (i-) process. This article reviews recent progress in direct neutron-capture measurements, focusing on time-of-flight (TOF) experiments at CERN n_TOF and complementary activation techniques. Substantial advances have been achieved for stable s-only and bottleneck isotopes, significantly improving constraints on s-process models. In parallel, the combination of high instantaneous neutron fluxes and advanced detector systems has facilitated first-time measurements of several radioactive branching-point nuclei. Feasibility studies, however, reveal current limitations related to sample availability, background conditions, and restricted energy coverage. In this context, the complementarity between TOF and activation emerges as a central strategy. Future developments, including high-flux facilities and novel inverse-kinematics experiments in ion storage rings, are expected to extend the boundaries of neutron-capture measurements, overcoming current limitation

Measurement of correlations between elliptic flow and mean transverse momentum in pp, p-Pb, and Pb-Pb collisions at the LHC

2026-03-13T17:53:26Z

Measurements of the event-by-event correlation between elliptic flow ($v_2$) and the mean transverse momentum ($[p_{\rm T}]$) using the modified Pearson correlation coefficient $ρ(v_2^2,[p_{\rm T}])$ are reported in pp collisions at $\sqrt{s} = 13$ TeV, and in p-Pb and Pb-Pb collisions at a center-of-mass energy per nucleon pair $\sqrt{s_{\rm NN}} = 5.02$ TeV. This analysis is based on the full LHC Run 2 dataset recorded by ALICE and is performed for the first time in small collision systems with the ALICE detector. In Pb-Pb collisions, the $ρ(v_2^2,[p_{\rm T}])$ measurement shows a non-monotonic dependence on charged particle multiplicity ($N_{\rm ch}$); it first decreases and then increases with an increase in multiplicity. The decreasing trends of $ρ(v_2^2,[p_{\rm T}])$ with increasing multiplicity are also observed in p-Pb and pp collisions for the presented multiplicity range. All three systems show consistent values of $ρ(v_2^2,[p_{\rm T}])$ for $N_{\rm ch} \lesssim 80$. These measurements are also compared with theoretical model calculations, including PYTHIA, where no collectivity is generated, as well as AMPT and IP-Glasma + MUSIC + UrQMD, which produce collective effects in small systems. These comparisons offer unique insights into the origin of collectivity in small systems. They improve the understanding of the initial geometry, size, and their correlations. The comparison also allows an investigation of the role of initial momentum correlations predicted by the Color Glass Condensate framework. The new measurements could not be explained by current state-of-the-art models, offering insights into the initial stage of collisions in small systems and also imposing strong constraints on the existing theoretical models. This will significantly advance our understanding of the collective phenomena observed in small systems at the LHC.

$π$, K, and p production in high-multiplicity pp collisions at $\sqrt{s} = 13$ TeV

2026-03-13T17:39:58Z

This paper presents the measurement of $π^{\pm}$, K$^{\pm}$, and p($\bar{\text{p}}$) production in high-multiplicity proton-proton collisions at $\sqrt{s} = 13$ TeV at midrapidity ($|y| < 0.5$) using the ALICE detector at the LHC. The transverse-momentum ($p_{\rm T}$) spectra of these particles are reported for three high-multiplicity classes. The results show a mass- and multiplicity-dependent hardening of the $p_{\rm T}$ spectra and an enhancement of the p/$π$ ratio at intermediate $p_{\rm T}$. These features are similar to those observed in heavy-ion collisions, where quark-gluon plasma formation is expected. The new measurements have extended the highest average charged-particle multiplicity density per unit of pseudorapidity achieved in pp collisions, roughly a factor five higher than that in average inelastic pp collisions, thereby reducing the multiplicity gap between small and large collision systems. In addition, the results are further compared with previously published measurements and with model calculations obtained using distinct tunes of the PYTHIA 8 Monte Carlo generator, as well as with predictions from the EPOS4. The comparison of the $p_{\rm T}$-integrated K/$π$ and p/$π$ ratios across different collision systems and energies suggests that particle production scales with charged-particle multiplicity, rather than with collision energy or system size. While the PYTHIA 8 tunes and the EPOS4 model are able to reproduce some of these measurements, either quantitatively or qualitatively, none of them consistently describes all observed features of the data.

Production of Low-Density Aerogel Nuclear Fuels for Use in Fission Fragment Rockets and Novel Reactor Design

2026-03-13T17:28:17Z

Graphene hydrogels were created and loaded with uranyl nitrate or thorium nitrate and freeze-dried to produce graphene aerogel nuclear fuels. These aerogels had densities between 0.018-0.035 g/cm3 and consisted of ~7.3 +- 0.5% uranium/thorium by mass. The ultra-low density of the aerogels allows for high energy ions to escape the fuel particles without depositing all their energy as heat, as is typical in nuclear fuels. Their measured alpha activity was ~16 pCi/mg, which could be enhanced up to ~49 pCi/mg by decreasing the thickness of aerogel samples to allow all alpha particles to escape. Additionally, high energy neutrons were used to induce fission to provide a source of fission fragments from the aerogel fuels. This novel form of nuclear fuel has potential applications in space propulsion such as fission fragment rocket engines, as well as in terrestrial applications for modular reactors, direct conversion methods, and in medical radiotherapeutics.

Sources of Radial Flow Fluctuations in the Quark-Gluon Plasma

2026-03-13T17:27:14Z

The differential radial flow fluctuation $v_0(p_{\mathrm{T}})$ has emerged as a new probe of the quark-gluon plasma. However, its characteristic rise-and-fall pattern with $p_{\mathrm{T}}$, resembling anisotropic flow, remains unexplained. I introduce a momentum rescaling framework that factorizes $v_0(p_{\mathrm{T}})$ into kinematic and dynamical components: $v_0(p_{\mathrm{T}})/v_0 = -[d\ln\langle n(p_{\mathrm{T}})\rangle/d\ln p_{\mathrm{T}} + 1] \times g(p_{\mathrm{T}})$. The first factor, determined by spectral shape, generates the rise-and-fall pattern as the spectra transition from exponential to power-law behavior. The dynamical component $g(p_{\mathrm{T}})$ isolates $p_{\mathrm{T}}$-dependent dynamics: $<1$ signals suppressed fluctuations, $>1$ indicates enhancement. Analysis of LHC data reveals $g(p_{\mathrm{T}})$ deviates from unity by 20-40% in central collisions. Predictions for RHIC show that spectral shape alone generates the rise-and-fall baseline pattern with substantial energy dependence. This framework enables tighter medium property constraints by separating kinematic from dynamical effects, with broad applications to anisotropic flow and higher-order radial flow fluctuations.

Strangeness neutrality and the QCD phase diagram

2026-03-13T16:34:21Z

We map out the phase structure of $N_f=2+1$ flavour QCD at strangeness neutrality with functional QCD. We find a critical end point at $(T_{\rm CEP},μ_{B,{\rm CEP}})|_{n_S=0} = (92, 696)$\,MeV. The computation is done with the functional renormalisation group, and we systematically improve on previous works, hence reducing the systematic error significantly. Our results pass relevant QCD benchmarks: they agree well with and corroborate the QCD phase structure from functional QCD results at vanishing strangeness chemical potential. Moreover, they agree well with lattice QCD results at vanishing chemical potential. Specifically, the ratio of the second order curvature coefficient $κ_2$ agrees with that obtained from lattice computations, $κ_2(n_S=0)/κ_2(μ_S=0)=0.897(20)$.

On-Demand Correlated Errors in Superconducting Qubits from a Particle Accelerator

2026-03-13T16:16:51Z

Ionizing radiation is a known source of correlated errors in superconducting quantum processors, inhibiting the functionality of quantum error correction surface codes. High-energy photons and charged particles deposit pair-breaking energy into these systems leading to excess quasiparticles near Josephson junctions that increase qubit decoherence. Previous investigations of this problem have relied on ambient, stochastic sources of ionizing radiation or alternative methods of quasiparticle generation. Here, we present a facility that couples an electron linear accelerator (linac) to a dilution refrigerator to study ionizing radiation in quantum systems. A single linac electron closely mimics the energy deposition characteristics of a typical cosmic-ray muon, and we demonstrate the facility's usefulness with a multi-qubit superconducting transmon chip. Characteristic radiation-induced relaxation errors are quickly and easily collected with the speed and timing information of the linac. Additionally, we present qubit excitation and detuning errors that can be difficult to detect without the on-demand source of ionizing radiation. These error signatures are shown to be dependent on the junction placement and surrounding superconducting gaps.

The effect of recoils on soft-drop-groomed observables in $γ$-tagged jets in a multistage approach

2026-03-13T05:05:45Z

We investigate medium-induced modifications to jet substructure observables that characterize hard components in central Pb-Pb collisions at $\sqrt{s_{NN}}=5.02$~TeV. Using a multistage Monte Carlo simulation of in-medium jet shower evolution, we explore flavor-dependent medium effects through simulations of inclusive and $γ$-tagged jets. The results show that quark jets undergo a nonmonotonic modification compared with gluon jets in observables such as the Pb-Pb to $p$-$p$ ratio of the soft drop prong angle $r_g$, the relative prong transverse momentum $k_{T,g}$, and the groomed mass $m_g$ distributions. Due to this nonmonotonic modification, $γ$-tagged jets, enriched in quark jets, provide surprisingly clear signals of medium-induced structural modifications, distinct from effects dominated by selection bias. Further systematic studies demonstrate that these effects are dominated by recoil medium response. This work highlights the potential of hard substructures in $γ$-tagged jets as powerful tools for probing the jet-medium interactions in high-energy heavy-ion collisions, in particular by enabling detailed investigations of jet-medium parton scatterings via their associated medium response. All simulations for $γ$-tagged jet analyses carried out in this paper used triggered events containing at least one hard photon, which highlights the utility of these observables for future Bayesian analysis.

An Improved Paralyzable Detector Mod

2026-03-13T04:57:39Z

Certain radiation detectors are `paralyzed' with high input count rates. When applied to count rates close to the event discriminator working rate the one-parameter dead time model fails. Here we present a corrected paralyzable detector model accounting for the event discriminator's finite response time. This two-parameter analytical model, when compared to the experimental data from a commercial x-ray detector, gives an improved description of the input and output count rate relations. Furthermore, it can independently determine the discriminator response time and the pulse shaper dead time, critical parameters for understanding a detector's performance. Finally, this model also provides a post-acquisition pile-up correction that greatly reduces artifacts in high-throughput spectra. In some situations, applying this model to optimize the acquisition and post-acquisition correction allows a user to acquire data an order of magnitude faster without compromising accuracy.

The N=126 Factory: A New Multi-Nucleon Transfer Reaction Facility

2026-03-12T18:25:45Z

Multi-nucleon transfer (MNT) reactions between two heavy ions offer an effective method of producing heavy, neutron-rich nuclei that cannot currently be accessed efficiently using traditional production techniques. These nuclei are important for understanding many astrophysical phenomena, such as the formation of the r-process $A\sim 195$ abundance peak. The N=126 Factory currently commissioning at Argonne National Laboratory's ATLAS facility will make use of these reactions to allow for the study of these nuclei. To convert MNT reaction products, which have a wide angular distribution, into a collimated, bunched beam suitable for experiments, a series of apparatus will be used. These start with a large-volume gas catcher for stopping the reaction products, which are then extracted through a radiofrequency quadrupole ion guide, undergo preliminary dipole magnetic separation, cooling and bunching in a Cooler-Buncher, and final separation using a multi-reflection time-of-flight mass separator, before final delivery to experimental systems.

The Matter Radius of 132Sn and the CREX-PREX Dilemma

2026-03-12T14:35:12Z

The density dependence of the nuclear symmetry energy remains a central open problem in nuclear physics. Parity violating electron scattering experiments have provided largely model-independent determinations of the neutron skin thickness of both 48Ca and 208Pb, whose consistent theoretical interpretation remains challenging. A new measurement of the matter radius of the unstable, doubly magic nucleus 132Sn provides an important additional constraint. Using a representative set of covariant energy density functionals spanning a wide range of isovector properties, we show that at least one of these models can simultaneously reproduce the charge and matter radii of132Sn. When interpreted together with the PREX and CREX results, the new measurement--much like CREX--favors a relatively soft symmetry energy. These findings underscore the need for an independent confirmation of the PREX result, such as the anticipated MREX campaign at the MESA facility.

Determination of the initial condition for the Balitsky-Kovchegov equation with transformers

2026-03-11T20:34:43Z

In the high-energy limit of QCD, scattering off nucleons and nuclei can be described in terms of Wilson-line correlators whose energy dependence is perturbative. The energy dependence of the two-point correlator, called the dipole amplitude, is governed by the Balitsky-Kovchegov (BK) equation. The initial condition for the BK equation can be fitted to the experimental data, which requires evolving the dipole amplitude for a large set of different parameter values. In this work, we train a transformer model to learn the energy dependence of the dipole amplitude, skipping the time-consuming numerical evaluation of the BK equation. The transformer predicts the learned dipole amplitude and the leading order inclusive deep inelastic scattering cross section very accurately, allowing for efficient fitting of the initial condition to the experimental data. Using this setup, we fit the initial condition of the BK equation to the inclusive deep inelastic scattering data from HERA and consider two different starting points $x_0$ for the evolution. We find better agreement with the experimental data for a smaller $x_0$. This work paves the way for future studies involving global fits of the dipole amplitude at leading order and beyond.