https://arxiv.org/api/HTLj7SyYNZiO5Llzj9AAvKHVlmY2026-06-25T14:12:18Z13088133515http://arxiv.org/abs/2401.10821v3On integer distance sets2025-08-25T13:51:01ZWe develop a new approach to address some classical questions concerning the size and structure of integer distance sets. Our main result is that any integer distance set in the Euclidean plane is either very sparse or has all but an exceedingly small proportion of its points lying on a single line or circle. From this, we deduce a near-optimal lower bound on the diameter of any non-collinear integer distance set of size $n$ and a strong upper bound on the size of any integer distance set in $[-N,N]^2$ with no three points on a line and no four points on a circle.2024-01-19T17:13:56Z35 pages, 2 figures; v3: strengthened structure theorem and added connection to a conjecture of FugledeRachel GreenfeldMarina IliopoulouSarah Pelusehttp://arxiv.org/abs/2508.17956v1Geometric properties of a new hyperbolic type metric2025-08-25T12:19:11ZA new distance function $\tilde{S}_{G,c}$ in metric space $(X,d)$ is introduced as \begin{align*} &\tilde{S}_{G,c}(x,y)=\log{\left(1+\frac{cd(x,y)}{\sqrt{1+d(x)}\sqrt{1+d(y)}}\right)} \end{align*} for $x$, $y\in X$ and $c$ is an arbitrary positive real number. We find that $\tilde{S}_{G,c}$ is a metric for $c\ge 2$. In general, the condition $c\geq2$ can not be improved. In this paper we investigate some geometric properties of the metric $\tilde{S}_{G,c}$ including the comparison inequalities between this metric and the triangular ratio metric and the inclusion relation between some metric balls. We show the quasiconformality of a bilipschitz mapping in metric $\tilde{S}_{G,c}$ and the distortion property of the metric $\tilde{S}_{\partial\mathbb{B}^n,c}$ under Möbius transformations of the unit ball.2025-08-25T12:19:11Z15 pagesXinyu ChenXiaohui Zhanghttp://arxiv.org/abs/2508.17745v1On the Smallest Singular Value of Log-Concave Random Matrices2025-08-25T07:39:42ZLet $A$ be an $N\times n$ random matrix whose entries are coordinates of an isotropic log-concave random vector in $\mathbb{R}^{Nn}$. We prove sharp lower tail estimates for the smallest singular value of $A$ in the following cases: (1) when $N=n$ and $A$ is drawn from an unconditional distribution, with no independence assumption; (2) when the columns of $A$ are independent and $N\geq n$; (3) when $A$ is sufficiently tall, that is $N\geq (1+λ)n$ for any positive constant $λ$.2025-08-25T07:39:42Z23 pagesManuel FernandezGalyna V. LivshytsStephanie Muihttp://arxiv.org/abs/2501.15650v2Dimensions and metric dyadic cubes2025-08-25T02:56:09ZIn this note, we provide equivalent definitions for fractal geometric dimensions through dyadic cube constructions. Given a metric space $X$ with finite Assouad dimension, i.e., satisfying the doubling property, we show that the construction of systems of dyadic cubes by Hytönen-Kairema is compatible with many dimensions. In particular, the Hausdorff, Minkowski, and Assouad dimensions can be equivalently expressed solely using dyadic cubes in the aforementioned system. The same is true for the Assouad spectrum, a collection of dimensions introduced by Fraser-Yu.2025-01-26T19:21:28Z11 pages, minor changesEfstathios Konstantinos Chrontsios Garitsishttp://arxiv.org/abs/2502.08396v3Periodic double tilings of the plane2025-08-23T15:17:41ZWe study tilings of the plane composed of two repeating tiles of different assigned areas relative to an arbitrary periodic lattice. We classify isoperimetric configurations (i.e., configurations with minimal length of the interfaces) both in the case of a fixed lattice or for an arbitrary periodic lattice. We find three different configurations depending on the ratio between the assigned areas of the two tiles and compute the isoperimetric profile. The three different configurations are composed of tiles with a different number of circular edges, moreover, different configurations exhibit a different optimal lattice. Finally, we raise some open problems related to our investigation.2025-02-12T13:38:37ZRevised version, to appear in Trans. Amer. Math. SocFrancesco NobiliMatteo NovagaEmanuele Paolinihttp://arxiv.org/abs/2508.17052v1Topological cones and positively polarizable hyperbolic norms2025-08-23T15:04:18ZIn the first part of this article, we study linear cones over totally ordered fields. We show that for each such cone there uniquely exists a universal vector space (called its spanned vector space) into which it embeds as a generating convex cone. Moreover, we investigate topologies on cones for which the natural cone operations are continuous, and study how these topologies carry over to the spanned vector space. In the second part, we deal with hyperbolic norms which satisfy a polarization identity and are defined on cones over the real numbers. We show that, under reasonable assumptions, such hyperbolic norms induce a Lorentzian inner product on the spanned vector space. Finally, we establish a link between completeness under the Wick rotation of a Lorentzian inner product and order-theoretic completeness.2025-08-23T15:04:18Z25 pages, comments welcomeEthan KharitonovArgam Ohanyanhttp://arxiv.org/abs/2508.16965v1Quantitative selection theorems2025-08-23T09:33:02ZThe point selection theorem says that the convex hull of any finite point set contains a point that lies in a positive proportion of the simplices determined by that set. This paper proves several new volumetric versions of this theorem which replace the points by sets of large volume, including the first volumetric selection theorem for $(d+1)$-tuples. As consequences, we significantly decrease the upper bound for the number of sets necessary in a volumetric weak $ε$-net, from $O_d(ε^{-d^2(d+3)^2/4})$ to $O_d(ε^{-(d+1)})$, and substantially reduce the the piercing number for volumetric $(p,q)$-theorems.
We also prove a volumetric version of the homogeneous point selection theorem. To do so, we introduce a volumetric same-type lemma and a new volumetric colorful Tverberg theorem.
We prove all of our results for diameter as well as volume.2025-08-23T09:33:02Z23 pages, comments welcomeTravis Dillonhttp://arxiv.org/abs/2207.13294v2A characterization of the ellipsoid through planar grazes2025-08-22T20:11:34ZIn this paper we proved the following: \emph{Let $K, L\subset \mathbb R^3$ be two $O$-symmetric convex bodies with $L\subset \emph{int} K$ strictly convex. Suppose that from every $x$ in $\emph{bd} K$ the graze $Σ(L,x)$ is a planar curve and $K$ is almost free with respect to $L$. Then $L$ is an ellipsoid.}2022-07-27T04:51:50ZIvan Gonzalez GarciaJesus Jeronimo CastroDiana Janett Verdusco HernandezEfren Morales Amaya10.1112/mtk.12176http://arxiv.org/abs/2504.04720v2Fractal Zeta Functions and Complex Dimensions of Ahlfors Metric Measure Spaces2025-08-22T18:44:32ZWhile classical analysis dealt primarily with smooth spaces, much research has been done in the last half century on expanding the theory to the nonsmooth case. Metric Measure spaces are the natural setting for such analysis, and it is thus important to understand the geometry of subsets of these spaces. In this paper we will focus on the geometry of Ahlfors regular spaces, Metric Measure spaces with an additional regularity condition. Historically, fractals have been studied using different ideas of dimension which have all proven to be unsatisfactory to some degree. The theory of complex dimensions, developed by M.L. Lapidus and a number of collaborators, was developed in part to better understand fractality in the Euclidean case and seeks to overcome these problems. Of particular interest is the recent theory of complex dimensions in higher-dimensional Euclidean spaces, as studied by M.L. Lapidus, G. Radunović, and D. Zubrinić, who introduced and studied the properties of the distance zeta function $ζ_A$. We will show that this theory of complex dimensions naturally generalizes to the case of Ahlfors regular spaces, as the distance zeta function can be modified to these spaces and all of its main properties carry over. We also provide a selection of examples in Ahlfors spaces, as well as hints that the theory can be expanded to a more general setting.2025-04-07T04:12:07Z38 pages, 8 figures, submitted to Journal of Fractal GeometryMichel L. LapidusSean Watsonhttp://arxiv.org/abs/2508.16442v1A limit theorem for Hausdorff approximation by random inscribed polytopes2025-08-22T14:56:46ZApproximate a smooth convex body $K$ with nonvanishing curvature by the convex hull of $n$ independent random points sampled from its boundary $\partial K$. In case the points are distributed according to the optimal density, we prove that the rescaled approximation error in Hausdorff distance tends to a Gumbel distributed random variable. The proof is based on an asymptotic relation to covering properties of random geodesic balls on $\partial K$ and on a limit theorem due to Janson.2025-08-22T14:56:46Z14 pagesMathias Sonnleitnerhttp://arxiv.org/abs/2303.02369v2Moduli spaces of Delzant polytopes and symplectic toric manifolds2025-08-22T10:08:02ZThis paper introduces modern geometric combinatorial technology from the theory of triangulations in order to derive results in toric symplectic geometry. In the main part of the paper we prove a number of properties of the space $\mathcal{D}(n)$ of $n$-dimensional Delzant polytopes. Two highlights are the construction of examples showing that, in contrast with the classical work of Oda in dimension $2$, no classification of combinatorially minimal Delzant polytopes can be expected in dimension $3$ or higher, and a proof that the space of $n$-dimensional Delzant polytopes is path-connected. Our proof of the latter is based on the fact that every rational fan can be refined to a unimodular fan, which is a standard technique used for resolution of singularities of toric varieties. In the last part of the paper, using the Delzant correspondence, these results allow us to answer several open questions concerning the moduli space $\mathcal{M}(n)$ of symplectic toric manifolds of dimension $2n$, since this space is isometric to the space of Delzant polytopes. Our results imply that no classification of minimal models of symplectic toric manifolds is plausible in dimension $6$ or higher, which answers in the negative a long-standing folklore question originating in Oda's work (1978).2023-03-04T10:07:42Z44 pages, 6 figures. Added table of contents and several clarifying figures. Introduction and abstract have been rewritten. Added Sections 3.5 and 4.2.1Advances in Mathematics 482, Part B, December 2025, 110624Álvaro PelayoFrancisco Santos10.1016/j.aim.2025.110624http://arxiv.org/abs/2406.01082v2On the Classification of Planar-Rips complexes and their corresponding unit disk graphs2025-08-22T10:04:35ZGiven a metric space $(X,d)$, the Vietoris-Rips complex of $X$ at a scale of $r >0$ is a simplicial complex whose simplices are all those finite subsets of $X$ with diameter less than $r$. In this paper, we classify, up to simplicial isomorphism, all $n$-dimensional pseudomanifolds and weak-pseudomanifolds that can be realized as a Vietoris-Rips complex of planar point sets. We further classify two-dimensional, pure, and closed planar-Rips complexes up to homotopy. Additionally, we explore the hereditary properties and introduce the notion of obstructions in planar-Rips complexes. We also consolidate our findings to describe a class of unit disk graphs, having all maximal cliques of same cardinality. Several structural and geometric properties of planar-Rips complexes have also been derived.2024-06-03T08:02:14ZVinay SipaniRamesh Kasilingamhttp://arxiv.org/abs/2508.16180v1Hölder maps from Euclidean spaces to Carnot groups2025-08-22T07:56:30ZWe give alternative proofs of (unsharp) results of Gromov's on his H\''older equivalence problem: for which $α$ does there exist a $C^α$-homeomorphism of an open set of Euclidean space to an open set of a given Carnot group? We indicate a possible route to sharp bounds.2025-08-22T07:56:30ZTexte post{é} sur une page depuis 2017 : https://www.imo.universite-paris-saclay.fr/~pierre.pansu/RnCarnot.pdfZoltan BaloghUNIBEArtem KozhevnikovLMOPierre PansuLMOhttp://arxiv.org/abs/2508.15634v1Submanifolds with boundary in sub-Riemannian Heisenberg Groups2025-08-21T14:57:40ZWe discuss the notion of submanifolds with boundary with intrinsic $C^1$ regularity in sub-Riemannian Heisenberg groups and we provide some examples. Eventually, we present a Stokes' Theorem for such submanifolds involving the integration of Rumin's differential forms in Heisenberg groups.2025-08-21T14:57:40Z8 pages, 6 figures; paper submitted to the series "Actes et Congrès" of the "Société Mathématique de France"Marco Di MarcoDavide Vittonehttp://arxiv.org/abs/2308.16851v2Stress-linked pairs of vertices and the generic stress matroid2025-08-21T14:32:32ZGiven a graph $G$ and a mapping $p : V(G) \to \mathbb{R}^d$, we say that the pair $(G,p)$ is a ($d$-dimensional) realization of $G$. Two realizations $(G,p)$ and $(G,q)$ are equivalent if each of the point pairs corresponding to the edges of $G$ have the same distance under the embeddings $p$ and $q$. A pair of vertices $\{u,v\}$ is globally linked in $G$ in $\mathbb{R}^d$ if for every generic realization $(G,p)$ and every equivalent realization $(G,q)$, $(G+uv,p)$ and $(G+uv,q)$ are also equivalent.
In this paper, we introduce and investigate the notion of $d$-stress-linked vertex pairs. Roughly speaking, a pair of vertices $\{u,v\}$ is $d$-stress-linked in $G$ if the edge $uv$ is generically stressed in $G+uv$ and for every generic $d$-dimensional realization $(G,p)$, every configuration $q$ that satisfies the equilibrium stresses of $(G,p)$ also satisfies the equilibrium stresses of $(G+uv,p)$. Among other results, we show that $d$-stress-linked vertex pairs are globally linked in $\mathbb{R}^d$, and we give a combinatorial characterization of $2$-stress-linked vertex pairs that matches the conjectural characterization of globally linked pairs in $\mathbb{R}^2$ due to Jackson et al.
As a key tool, we introduce and study the ``algebraic dual'' of the $d$-dimensional generic rigidity matroid of a graph $G$, which we call the $d$-dimensional generic stress matroid of $G$. Our results about this matroid, which describes the global behavior of equilibrium stresses of generic realizations of $G$, may be of independent interest.
We use our results to give positive answers to a conjecture of Jordán on minimally globally rigid graphs, a conjecture of Jordán and the author on globally linked vertex pairs, and to conjectures of Connelly and Grasegger et al. on rigidity properties of graphs with small separators.2023-08-31T16:47:19Zimproved presentation and some new/stronger resultsDániel Garamvölgyi