https://arxiv.org/api/WojYnaXG6uXVmpIQVwRduB8ttSE 2026-03-20T14:11:18Z 43966 45 15 http://arxiv.org/abs/2504.12441v2 2026-03-18T22:32:14Z

Accurately modeling friction in robotics remains a core challenge, as robotics simulators like MuJoCo and PyBullet use simplified friction models or heuristics to balance computational efficiency with accuracy, where these simplifications and approximations can lead to substantial differences between simulated and physical performance. In this paper, we present a physics-informed friction estimation framework that enables the integration of well-established friction models with learnable components, requiring only minimal, generic measurement data. Our approach enforces physical consistency yet retains the flexibility to capture complex friction phenomena. We demonstrate, on an underactuated and nonlinear system, that the learned friction models, trained solely on small and noisy datasets, accurately reproduce dynamic friction properties with significantly higher fidelity than the simplified models commonly used in robotics simulators. Crucially, we show that our approach enables the learned models to be transferable to systems they are not trained on. This ability to generalize across multiple systems streamlines friction modeling for complex, underactuated tasks, offering a scalable and interpretable path toward improving friction model accuracy in robotics and control.

2025-04-16T19:15:48Z 7 pages, 8 figures, Accepted to 2026 American Control Conference (ACC) Asutay Ozmen João P. Hespanha Katie Byl http://arxiv.org/abs/2506.14662v4 2026-03-18T21:52:43Z

Achieving a sustainable electricity infrastructure requires the explicit integration of carbon emissions into power system modeling and optimization. However, existing open-source test cases for power system research lack generator-level carbon profiling, preventing the benchmark of carbon-aware operational strategies. To address this gap, this work introduces PGLib-CO2, an open-source extension to the PGLib-OPF test case library. The proposed PGLib-CO2 enriches standard grid test cases with CO2 and CO2-equivalent emission intensity factors to achieve realistic, generator-level carbon profiling with an expanded list of fuel types. Using the standardized data, PGLib-CO2 allows us to enhance the algorithms for computing key carbon emission metrics. We first utilize the differentiable programming paradigm for computing LMCE by treating the OPF-based grid dispatch as a differentiable layer. This method provides a rigorous marginal sensitivity for general convex cost functions, eliminating the need of using a small incremental change in numerical perturbation. Moreover, to accelerate the real-time LMCE computation, we develop an MPP-based approach that shifts the optimization burden to offline phase of identifying the OPF critical regions. Since each critical region is characterized by a pre-computed affine dispatch function, the online phase reduces to identifying the region followed by efficiently evaluating the region-specific LMCE values. Numerical evaluations on IEEE test systems demonstrate that the differentiable LMCE computation attains the precise sensitivity information, and the MPP-based approach retrieves the LMCE signals faster than the direct optimization approach. By bridging high-fidelity data with advanced parametric computation, PGLib-CO2 provides a reproducible and computationally efficient foundation for future research in sustainable power system operations.

2025-06-17T15:52:47Z Young-ho Cho Min-Seung Ko Hao Zhu http://arxiv.org/abs/2603.18284v1 2026-03-18T21:05:40Z

Mobile robotic manipulation--the ability of robots to navigate spaces and interact with objects--is a core capability of physical AI. Foundation models have led to breakthroughs in their performance, but at a significant computational cost. We present the first measurement study of mobile robotic manipulation workloads across onboard, edge, and cloud GPU platforms. We find that the full workload stack is infeasible to run on smaller onboard GPUs, while larger onboard GPUs drain robot batteries several hours faster. Offloading alleviates these constraints but introduces its own challenges, as additional network latency degrades task accuracy, and the bandwidth requirement makes naive cloud offloading impractical. Finally, we quantify opportunities and pitfalls of sharing compute across robot fleets. We believe our measurement study will be crucial to designing inference systems for mobile robots.

2026-03-18T21:05:40Z 15 pages, 17 figures Sara Pohland Xenofon Foukas Ganesh Ananthanarayanan Andrey Kolobov Sanjeev Mehrotra Bozidar Radunovic Ankit Verma http://arxiv.org/abs/2509.09812v3 2026-03-18T19:45:00Z

This paper presents a data-driven approach for designing state observers for continuous-time nonlinear systems, where an extended dynamic mode decomposition (EDMD) procedure is used to identify an approximate linear lifted model. Since such a model on a finite-dimensional space spanned by the dictionary functions has an inevitable mismatch, we first establish, based on our theory of reproducing kernel Hilbert space with a linear-radial kernel, that the nonlinear error magnitude in the approximate linear model is sectorially bounded by the lifted state. The sector bound comprises a deterministic part due to the finite dictionary and a stochastic part due to the random data samples, and the observer design needs to account for both of these errors in a robust formulation. Hence, the observer synthesis is performed using linear matrix inequalities (LMIs), specified by the desired exponential decay rate of the observation error (when the system is asymptotically stable) or the L2-gain from the modeling error to the observation error. Numerical studies demonstrate the effectiveness and flexibility of the proposed method. As such, this work entails an explicit elementary use of linear systems theory for nonlinear state observation in a Koopman operator-theoretic framework.

2025-09-11T19:32:20Z 8 pages, 4 figures. Submitted to the 2026 65th IEEE Conference on Decision and Control (CDC) to be held in Honolulu, HI, USA Xiuzhen Ye Wentao Tang http://arxiv.org/abs/2603.18236v1 2026-03-18T19:43:39Z

Continuous-time primal-dual gradient dynamics (PDGD) is an ubiquitous approach for dynamically solving constrained distributed optimization problems. Yet, the distributed nature of the dynamics makes it prone to communication uncertainties, especially time delays. To mitigate this effect, we propose a delay-robust continuous-time PDGD. The dynamics is obtained by augmenting the standard PDGD with an auxiliary state coupled through a gain matrix, while preserving the optimal solution. Then, we present sufficient tuning conditions for this gain matrix in the form of linear matrix inequalities, which ensure uniform asymptotic stability in the presence of bounded, time-varying delays. The criterion is derived via the Lyapunov-Krasovskii method. A numerical example illustrates the improved delay robustness of our approach compared to the standard PDGD under large, time-varying delays.

2026-03-18T19:43:39Z Gökçen Devlet Şen Juan E. Machado Gülay Öke Günel Johannes Schiffer http://arxiv.org/abs/2602.07684v2 2026-03-18T19:27:09Z

The impact of routine smaller outages on distribution system customers in terms of customer minutes interrupted can be tracked using conventional reliability indices. However, the customer minutes interrupted in large blackout events are extremely variable, and this makes it difficult to quantify the customer impact of these extreme events with resilience metrics. We solve this problem with the System Average Large Event Duration Index SALEDI that logarithmically transforms the customer minutes interrupted. We explain how this new resilience metric works, compare it with alternatives, quantify its statistical accuracy, and illustrate its practical use with standard outage data from five utilities.

2026-02-07T20:10:43Z Arslan Ahmad Ian Dobson http://arxiv.org/abs/2603.18219v1 2026-03-18T19:07:40Z

We study the convergence properties of a payoff-based higher-order version of replicator dynamics, a widely studied model in evolutionary dynamics and game-theoretic learning, in contractive games. Recent work has introduced a control-theoretic perspective for analyzing the convergence of learning dynamics through passivity theory, leading to a classification of learning dynamics based on the passivity notion they satisfy, such as \textdelta-passivity, equilibrium-independent passivity, and incremental passivity. We leverage this framework for the study of higher-order replicator dynamics for contractive games, which form the complement of passive learning dynamics. Standard replicator dynamics can be represented as a cascade interconnection between an integrator and the softmax mapping. Payoff-based higher-order replicator dynamics include a linear time-invariant (LTI) system in parallel with the existing integrator. First, we show that if this added system is strictly passive and asymptotically stable, then the resulting learning dynamics converge locally to the Nash equilibrium in contractive games. Second, we establish global convergence properties using incremental stability analysis for the special case of symmetric matrix contractive games.

2026-03-18T19:07:40Z Hassan Abdelraouf Vijay Gupta Jeff S. Shamma http://arxiv.org/abs/2603.18200v1 2026-03-18T18:52:40Z

Electrified propulsion is expected to play an important role in the sustainable development of Advanced Air Mobility (AAM). However, the limited energy density of batteries motivates the need to minimize energy consumption during flight. This paper studies the minimum total energy problem for an all-electric aircraft in steady cruise flight. The problem is formulated as an optimal control problem in which the cruise airspeed and final cruise time are optimization variables. The battery supply voltage is modeled as an affine function of the battery charge. Pontryagin's Minimum Principle is used to derive the necessary and sufficient conditions for optimality, from which closed-form expressions for the optimal cruise airspeed and optimal final cruise time are obtained. Additional analytical conditions are derived that determine when all-electric operation is feasible, one of which is that sufficient electric charge must be available. Numerical simulations based on the BETA Technologies CX300 all-electric aircraft and a representative AAM scenario illustrate how the aircraft weight, cruising altitude, electrical system efficiency, and initial battery charge influence the optimal airspeed and the feasibility of all-electric cruise.

2026-03-18T18:52:40Z 17 pages, 3 figures, submitted to Aerospace Systems special issue on Low-altitude Economy Steven Li Luis Rodrigues http://arxiv.org/abs/2603.15588v2 2026-03-18T18:33:53Z

Large-scale AI training workloads in modern data centers exhibit rapid and periodic power fluctuations, which may induce significant voltage deviations in power distribution systems. Existing voltage regulation methods, such as droop control, are primarily designed for slowly varying loads and may therefore be ineffective in mitigating these fast fluctuations. In addition, repeated control actions can incur substantial cost. To address this challenge, this paper proposes a decentralized switching-reference voltage control framework that exploits the structured behavior of AI training workloads. We establish conditions for voltage convergence and characterize an effective reference design that aligns with the two dominant operating levels of the AI training workload. The switching rule for voltage references is implemented solely using local voltage measurements, enabling simple local implementation while significantly reducing control effort. Simulation studies demonstrate that the proposed method substantially reduces both voltage deviations and reactive control effort, while remaining compatible with internal data center control strategies without requiring extensive coordination.

2026-03-16T17:48:27Z Mingyuan Yan Trager Joswig-Jones Baosen Zhang Yize Chen Wenqi Cui http://arxiv.org/abs/2603.17931v1 2026-03-18T17:05:44Z

This paper proposes a real-time control policy for cascaded hydropower systems that incorporates decision-dependent uncertainty (DDU) to capture the coupling of streamflow uncertainties across the network. The framework jointly models exogenous forecast errors and endogenous uncertainty propagation, explicitly characterizing the dependence between upstream releases and downstream inflow variability through a heteroskedastic variance model conditioned on past errors, variance, and control actions. We formulate a joint chance-constrained optimization problem to ensure reliable system operation under uncertainty, and develop a tractable supporting hyperplane algorithm that enables explicit and adaptive risk allocation under DDU. We establish convergence of the proposed method and show that it recovers the Bonferroni approximation under steady-state conditions. A randomized case study based on Columbia River data demonstrates that the proposed framework improves both energy generation and reservoir reliability by accounting for DDU. Sensitivity analyses on drought severity and model parameters further highlight the value of adaptive risk allocation for resilient hydropower operations.

2026-03-18T17:05:44Z Eliza Cohn Ning Qi Upmanu Lall Bolun Xu http://arxiv.org/abs/2603.18122v1 2026-03-18T16:37:29Z

Skele-Code is a natural-language and graph-based interface for building workflows with AI agents, designed especially for less or non-technical users. It supports incremental, interactive notebook-style development, and each step is converted to code with a required set of functions and behavior to enable incremental building of workflows. Agents are invoked only for code generation and error recovery, not orchestration or task execution. This agent-supported, but code-first approach to workflows, along with the context-engineering used in Skele-Code, can help reduce token costs compared to the multi-agent system approach to executing workflows. Skele-Code produces modular, easily extensible, and shareable workflows. The generated workflows can also be used as skills by agents, or as steps in other workflows.

2026-03-18T16:37:29Z Main paper 9 pages. Topics: Agentic Coding, HCI, LLMs, Workflows Sriram Gopalakrishnan http://arxiv.org/abs/2603.17867v1 2026-03-18T15:55:26Z

We propose RHYME-XT, an operator-learning framework for surrogate modeling of spatiotemporal control systems governed by input-affine nonlinear partial integro-differential equations (PIDEs) with localized rhythmic behavior. RHYME-XT uses a Galerkin projection to approximate the infinite-dimensional PIDE on a learned finite-dimensional subspace with spatial basis functions parameterized by a neural network. This yields a projected system of ODEs driven by projected inputs. Instead of integrating this non-autonomous system, we directly learn its flow map using an architecture for learning flow functions, avoiding costly computations while obtaining a continuous-time and discretization-invariant representation. Experiments on a neural field PIDE show that RHYME-XT outperforms a state-of-the-art neural operator and is able to transfer knowledge effectively across models trained on different datasets, through a fine-tuning process.

2026-03-18T15:55:26Z 6 pages, 5 figures. Submitted to IEEE Control Systems Letters (L-CSS) and CDC 2026 Marijn Ruiter Miguel Aguiar Jake Rap Karl H. Johansson Amritam Das http://arxiv.org/abs/2603.17849v1 2026-03-18T15:37:01Z

We establish a canonical decomposition of the infinitesimal Koopman generator of any port-Hamiltonian (pH) system into skew-adjoint (energy-conserving), positive-semidefinite (dissipative), and input-port components, proving that the generator satisfies an energy-dissipation inequality on a dense subdomain of $L^2(μ)$ for any invariant measure $μ$ satisfying a mild joint-invariance condition stated in Theorem 1. This infinite-dimensional splitting carries over exactly to finite-dimensional Galerkin approximations, yielding structure-constrained surrogate models that provably inherit passivity with a quadratic storage function in the lifted observable space. Leveraging this structure, we design passivity-based controllers directly in the lifted space and establish asymptotic stability of the lifted closed-loop system via LaSalle's invariance principle under a mild detectability condition. For linear pH systems, the decomposition recovers the true pH matrices exactly, confirming that the structural constraints arise naturally from the operator theory rather than being imposed by hand. The framework unifies port-Hamiltonian systems theory and Koopman spectral methods, providing a rigorous operator-theoretic foundation for energy-consistent lifting of nonlinear pH dynamics.

2026-03-18T15:37:01Z 8 pages; submitted to IEEE Conference on Decision and Control, 2026 Victor M. Preciado http://arxiv.org/abs/2603.17843v1 2026-03-18T15:33:46Z

We provide a method to design adaptive controllers for nonlinear systems using model predictive control (MPC). By combining a certainty-equivalent MPC formulation with least-mean-square parameter adaptation, we obtain an adaptive controller with strong robust performance guarantees: The cumulative tracking error and violation of state constraints scale linearly with noise energy, disturbance energy, and path length of parameter variation. A key technical contribution is developing the underlying certainty-equivalent MPC that tracks output references, accounts for actuator limitations and desired state constraints, requires no system-specific offline design, and provides strong inherent robustness properties. This is achieved by leveraging finite-horizon rollouts, artificial references, recent analysis techniques for optimization-based controllers, and soft state constraints. For open-loop stable systems, we derive a semi-global result that applies to arbitrarily large measurement noise, disturbances, and parametric uncertainty. For stabilizable systems, we derive a regional result that is valid within a given region of attraction and for sufficiently small uncertainty. Applicability and benefits are demonstrated with numerical simulations involving systems with large parametric uncertainty: a linear stable chain of mass-spring-dampers and a nonlinear unstable quadrotor navigating obstacles.

2026-03-18T15:33:46Z Code available at: https://github.com/KohlerJohannes/Adaptive Johannes Köhler http://arxiv.org/abs/2601.09058v2 2026-03-18T15:30:08Z

The Access Traffic Steering, Switching, and Splitting (ATSSS) defined in the latest 3GPP Release 19 enables traffic flow over the multiple access paths to achieve the lower-latency End-to-end (E2E) delivery for 6G time-sensitive services. However, the existing E2E multi-path operation often falls short of more stringent QoS requirements for 6G time-sensitive services. This work proposes a Reconfigurable Intelligent Surfaces (RIS)-aided E2E multi-path uplink (UL) transmission architecture that explicitly accounts for both radio link latency and N3 backhaul latency, via the coupled designs of the UL traffic-splitting ratio, transmit power, receive combining, and RIS phase shift under practical constraints to achieve the minimum average E2E latency. We develop an alternating optimization framework that updates the above target parameters to be optimized. The simulations were conducted to compare the effectiveness of the proposed E2E optimization framework that lowers the average E2E latency up to 43% for a single user and 32% for the whole system compared with baselines in our prior work [1].

2026-01-14T00:58:16Z This work has been submitted to the IEEE for possible publication.5 pages,2 figures,journal paper Liu Cao Zisheng Gong Ziyue Xiao Zhaoyu Liu Houtianfu Wang Lyutianyang Zhang