https://arxiv.org/api/9x49nR1cgRAlHPp2KChBhd20X2U 2026-03-22T15:41:03Z 43966 135 15 http://arxiv.org/abs/2603.16565v1 2026-03-17T14:23:58Z

This article presents a deep learning-driven inverse design methodology for Doherty power amplifiers (PA) with multi-port pixelated output combiner networks. A deep convolutional neural network (CNN) is developed and trained as an electromagnetic (EM) surrogate model to accurately and rapidly predict the S-parameters of pixelated passive networks. By leveraging the CNN-based surrogate model within a blackbox Doherty framework and a genetic algorithm (GA)-based optimizer, we effectively synthesize complex Doherty combiners that enable an extended back-off efficiency range using fully symmetrical devices. As a proof of concept, we designed and fabricated two Doherty PA prototypes incorporating three-port pixelated combiners, implemented with GaN HEMT transistors. In measurements, both prototypes demonstrate a maximum drain efficiency exceeding 74% and deliver an output power surpassing 44.1 dBm at 2.75 GHz. Furthermore, a measured drain efficiency above 52% is maintained at the 9-dB back-off power level for both prototypes at the same frequency. To evaluate linearity and efficiency under realistic signal conditions, both prototypes are tested using a 20-MHz 5G new radio (NR)-like waveform exhibiting a peak-to-average power ratio (PAPR) of 9.0 dB. After applying digital predistortion (DPD), each design achieves an average power added efficiency (PAE) above 51%, while maintaining an adjacent channel leakage ratio (ACLR) better than -60.8 dBc.

2026-03-17T14:23:58Z Han Zhou Haojie Chang David Widen http://arxiv.org/abs/2507.02438v2 2026-03-17T14:21:44Z

Shared control combines human intention with autonomous decision-making. At the low level, the primary goal is to maintain safety regardless of the user's input to the system. However, existing shared control methods-based on, e.g., Model Predictive Control, Control Barrier Functions, or learning-based control-often face challenges with feasibility, scalability, and mixed constraints. To address these challenges, we propose a Constraint-Aware Assistive Controller that computes control actions online while ensuring recursive feasibility, strict constraint satisfaction, and minimal deviation from the user's intent. It also accommodates a structured class of non-convex constraints common in real-world settings. We leverage Robust Controlled Invariant Sets for recursive feasibility and a Mixed-Integer Quadratic Programming formulation to handle non-convex constraints. We validate the approach through a large-scale user study with 66 participants-one of the most extensive in shared control research-using a simulated environment to assess task load, trust, and perceived control, in addition to performance. The results show consistent improvements across all these aspects without compromising safety and user intent. Additionally, a real-world experiment on a robotic manipulator demonstrates the framework's applicability under bounded disturbances, ensuring safety and collision-free operation.

2025-07-03T08:52:05Z Accepted for publication at the 2026 IEEE International Conference on Robotics and Automation (ICRA) Shivam Chaubey Francesco Verdoja Shankar Deka Ville Kyrki http://arxiv.org/abs/2603.16523v1 2026-03-17T13:45:57Z

This paper analyzes consensus in multi-agent systems under uniform and nonuniform communication delays, a key challenge in distributed coordination with applications to robotic swarms. It investigates the convergence of a consensus algorithm accounting for delays across communication links in a connected, undirected graph. Novel convergence results are derived using Rouché's theorem and Lyapunov-based stability analysis. The system is shown to reach consensus at a steady-state value given by a weighted average determined by the delay distribution, with stability ensured under explicit parameter bounds. Both uniform and nonuniform delay scenarios are analyzed, and the corresponding convergence values are explicitly derived. The theoretical results are validated through simulations, which explore the impact of delay heterogeneity on consensus outcomes. Furthermore, the algorithm is implemented and experimentally tested on a swarm of QBOT3 ground robots to solve the rendezvous problem, demonstrating the agents' ability to converge to a common location despite realistic communication constraints, thus confirming the algorithm's robustness and practical applicability. The results provide guidelines for designing consensus protocols that tolerate communication delays, offer insights into the relationship between network delays and coordination performance, and demonstrate their applicability to distributed robotic systems.

2026-03-17T13:45:57Z 12 pages, 3 figures Shokoufeh Naderi Maude Blondin Sébastien Roy http://arxiv.org/abs/2603.16503v1 2026-03-17T13:30:33Z

Conventional mobile tensegrity robots constructed with straight links offer mobility at the cost of locomotion speed. While spherical robots provide highly effective rolling behavior, they often lack the stability required for navigating unstructured terrain common in many space exploration environments. This research presents a solution with a semi-circular, curved-link tensegrity robot that strikes a balance between efficient rolling locomotion and controlled stability, enabled by discontinuities present at the arc endpoints. Building upon an existing geometric static modeling framework [1], this work presents the system design of an improved Tensegrity eXploratory Robot 2 (TeXploR2). Internal shifting masses instantaneously roll along each curved-link, dynamically altering the two points of contact with the ground plane. Simulations of quasistatic, piecewise continuous locomotion sequences reveal new insights into the positional displacement between inertial and body frames. Non-intuitive rolling behaviors are identified and experimentally validated using a tetherless prototype, demonstrating successful dynamic locomotion. A preliminary impact test highlights the tensegrity structure's inherent shock absorption capabilities and conformability. Future work will focus on finalizing a dynamic model that is experimentally validated with extended testing in real-world environments as well as further refinement of the prototype to incorporate additional curved-links and subsequent ground contact points for increased controllability.

2026-03-17T13:30:33Z Accepted to IEEE International Conference on Robotics and Automation (ICRA) 2026 Lauren Ervin Harish Bezawada Vishesh Vikas http://arxiv.org/abs/2603.16481v1 2026-03-17T13:06:54Z

Non-conservative uncertainty bounds are essential for making reliable predictions about latent functions from noisy data--and thus, a key enabler for safe learning-based control. In this domain, kernel methods such as Gaussian process regression are established techniques, thanks to their inherent uncertainty quantification mechanism. Still, existing bounds either pose strong assumptions on the underlying noise distribution, are conservative, do not scale well in the multi-output case, or are difficult to integrate into downstream tasks. This paper addresses these limitations by presenting a tight, distribution-free bound for multi-output kernel-based estimates. It is obtained through an unconstrained, duality-based formulation, which shares the same structure of classic Gaussian process confidence bounds and can thus be straightforwardly integrated into downstream optimization pipelines. We show that the proposed bound generalizes many existing results and illustrate its application using an example inspired by quadrotor dynamics learning.

2026-03-17T13:06:54Z Amon Lahr Anna Scampicchio Johannes Köhler Melanie N. Zeilinger http://arxiv.org/abs/2603.16458v1 2026-03-17T12:39:08Z

Space-air-ground integrated networks (SAGIN) promise ubiquitous 6G connectivity but face significant resource management challenges due to heterogeneous infrastructure, dynamic topologies, and stringent quality-of-service (QoS) requirements. Conventional model-driven approaches struggle with scalability and adaptability in such complex environments. This paper presents an agentic artificial intelligence (AI) framework for autonomous SAGIN resource management by embedding large language model (LLM)-based agents into a Monitor-Analyze-Plan- Execute-Knowledge (MAPE-K) control plane. The framework incorporates three specialized agents, namely semantic resource perceivers, intent-driven orchestrators, and adaptive learners, that collaborate through natural language reasoning to bridge the gap between operator intents and network execution. A key innovation is the hierarchical agent-reinforcement learning (RL) collaboration mechanism, wherein LLM-based orchestrators dynamically shape reward functions for RL agents based on semantic network conditions. Validation through UAV-assisted AIGC service orchestration in energy-constrained scenarios demonstrates that LLM-driven reward shaping achieves 14% energy reduction and the lowest average service latency among all compared methods. This agentic paradigm offers a scalable pathway toward adaptive, AI-native 6G networks, capable of autonomously interpreting intents and adapting to dynamic environments.

2026-03-17T12:39:08Z eg.: 7 pages, 6 figures Linghao Zhang Haitao Zhao Bo Xu Hongbo Zhu Xianbin Wang http://arxiv.org/abs/2512.18356v3 2026-03-17T12:13:40Z

Conventional robust H2/H-infinity control minimizes the worst-case performance, often leading to a conservative design driven by very rare parametric configurations. To reduce this conservatism while taking advantage of the stochastic properties of Monte Carlo sampling and its compatibility with parallel computing, we introduce an alternative paradigm that optimizes the controller with respect to a stochastic criterion, namely the conditional value at risk. We present the problem formulation and discuss several open challenges toward a general synthesis framework. The potential of this approach is illustrated on a mechanical system, where it significantly improves overall performance by tolerating some degradation in very rare worst-case scenarios.

2025-12-20T12:56:05Z Preprint Ervan Kassarian Francesco Sanfedino Daniel Alazard Andrea Marrazza http://arxiv.org/abs/2603.16424v1 2026-03-17T11:59:30Z

Parallel simulation and control of large-scale robotic systems often rely on partitioned time stepping, yet finite-iteration coupling can inject spurious energy by violating power consistency--even when each subsystem is passive. This letter proposes a novel energy-safe, early-terminable iterative coupling for port-Hamiltonian subsystems by embedding a Douglas--Rachford (DR) splitting scheme in scattering (wave) coordinates. The lossless interconnection is enforced as an orthogonal constraint in the wave domain, while each subsystem contributes a discrete-time scattering port map induced by its one-step integrator. Under a discrete passivity condition on the subsystem time steps and a mild impedance-tuning condition, we prove an augmented-storage inequality certifying discrete passivity of the coupled macro-step for any finite inner-iteration budget, with the remaining mismatch captured by an explicit residual. As the inner budget increases, the partitioned update converges to the monolithic discrete-time update induced by the same integrators, yielding a principled, adaptive accuracy--compute trade-off, supporting energy-consistent real-time parallel simulation under varying computational budgets. Experiments on a coupled-oscillator benchmark validate the passivity certificates at numerical roundoff (on the order of 10e-14 in double precision) and show that the reported RMS state error decays monotonically with increasing inner-iteration budgets, consistent with the hard-coupling limit.

2026-03-17T11:59:30Z Qi Wei Jianfeng Tao Hongyu Nie Wangtao Tan http://arxiv.org/abs/2512.13344v2 2026-03-17T10:18:36Z

Signal Temporal Logic (STL) provides a powerful framework to describe complex tasks involving temporal and logical behavior in dynamical systems. This work addresses controller synthesis for continuous-time systems subject to STL specifications and input constraints. We propose a neural network-based framework for synthesizing time-varying control barrier functions (TVCBF) and their corresponding controllers for systems to fulfill a fragment of STL specifications while respecting input constraints. We formulate barrier conditions incorporating the spatial and temporal logic of the given STL specification. We also incorporate a method to refine the time-varying set that satisfies the STL specification for the given input constraints. Additionally, we introduce a validity condition to provide formal safety guarantees across the entire state space. Finally, we demonstrate the effectiveness of the proposed approach through several simulation studies considering different STL tasks for various dynamical systems (including affine and non-affine systems).

2025-12-15T13:55:54Z Vaishnavi Jagabathula Pushpak Jagtap http://arxiv.org/abs/2603.16231v1 2026-03-17T08:17:50Z

Numerical optimal control is commonly divided between globally structured but dimensionally intractable Hamilton-Jacobi-Bellman (HJB) methods and scalable but local trajectory optimization. We introduce the Featurized Occupation Measure (FOM), a finite-dimensional primal-dual interface for the occupation-measure formulation that unifies trajectory search and global HJB-type certification. FOM is broad yet numerically tractable, covering both explicit weak-form schemes and implicit simulator- or rollout-based sampling methods. Within this framework, approximate HJB subsolutions serve as intrinsic numerical certificates to directly evaluate and guide the primal search. We prove asymptotic consistency with the exact infinite-dimensional occupation-measure problem, and show that for block-organized feasible certificates, finite-dimensional approximation preserves certified lower bounds with blockwise error and complexity control. We also establish persistence of these lower bounds under time shifts and bounded model perturbations. Consequently, these structural properties render global certificates into flexible, reusable computational objects, establishing a systematic basis for certificate-guided optimization in nonlinear control.

2026-03-17T08:17:50Z Qi Wei Jianfeng Tao Haoyang Tan Hongyu Nie http://arxiv.org/abs/2603.16198v1 2026-03-17T07:23:57Z

This paper investigates a decentralized design approach of leader-following consensus protocols for heterogeneous multiagent systems under a fixed communication topology with a directed spanning tree (DST) and asymmetric weight matrix. First, a control protocol using only the information of the neighbor on the DST of each agent is designed, which is called the consensus protocol with minimal communication links. Particularly, the DST-based linear transformation method is used to transform the consensus problem into a partial variable stability problem of a corresponding system, and a decentralized design method is proposed to find the gain matrices in the protocols. Next, the decentralized design approach is extended to the protocols using all neighbor information in the original communication topology with the help of the matrix diagonally dominant method. Some numerical simulations are given to illustrate the theoretical results.

2026-03-17T07:23:57Z 14 pages, 4 figures Lanhao Zhao Yangzhou Chen http://arxiv.org/abs/2603.16182v1 2026-03-17T07:06:49Z

This paper proposes a decentralized design approach of consensus protocols of multi-agent systems via a directed-spanning-tree(DST)-based linear transformation and the corresponding minimal communication links. First, the consensus problem of multi-agent systems is transformed into the decentralized output stabilization problem by constructing a linear transformation based on a DST of the communication topology, and thus a necessary and sufficient consensus criterion in terms of decentralized fixed mode is derived. Next, a new distributed protocol is designed by using only the neighbors information on the DST, which is a fully decentralized design approach. Finally, some numerical examples are given to verify the results attained.

2026-03-17T07:06:49Z 6 pages, 8 figures Yangzhou Chen Lanhao Zhao http://arxiv.org/abs/2512.05822v2 2026-03-17T07:04:54Z

This paper presents a safe output regulation control strategy for a class of systems modeled by a coupled $2\times 2$ hyperbolic PDE-ODE structure, subject to fully distributed disturbances throughout the system. A state-feedback controller is developed by the {nonovershooting backstepping} method to simultaneously achieve exponential output regulation and enforce safety constraints on the regulated output that is the state furthest from the control input. To handle unmeasurable states and external disturbances, a state observer and a disturbance estimator are designed. Explicit bounds on the estimation errors are derived and used to construct a robust safe regulator that accounts for the uncertainties. The proposed control scheme guarantees that: 1) If the regulated output is initially within the safe region, it remains there; otherwise, it will be rescued to the safety within a prescribed time; 2) The output tracking error converges to zero exponentially; 3) The observer accurately estimates both the distributed states and external disturbances, with estimation errors converging to zero exponentially; 4) All signals in the closed-loop system remain bounded. The effectiveness of the proposed method is demonstrated through a UAV delivery scenario with a cable-suspended payload, where the payload is regulated to track a desired reference while avoiding collisions with barriers.

2025-12-05T15:41:28Z Ji Wang Miroslav Krstic http://arxiv.org/abs/2507.18131v2 2026-03-17T06:12:26Z

Model order reduction techniques simplify high-dimensional dynamical systems by deriving lower-dimensional models that retain essential system characteristics. These techniques are crucial for the controller design of complex systems while significantly reducing computational costs. Nevertheless, constructing effective reduced-order models (ROMs) poses considerable challenges, particularly for nonlinear dynamical systems. These challenges are further exacerbated when the actual system model is unavailable, a scenario frequently encountered in real-world applications. In this work, we propose a data-driven framework for constructing ROMs of nonlinear dynamical systems with unknown mathematical models, enabling controller synthesis directly from the resulting ROMs. We establish similarity relations between the output trajectories of the original systems and those of their ROMs by employing the notion of simulation functions (SFs), thereby enabling a formal characterization of their closeness. To achieve this, we collect one set of noise-corrupted input-state data from the system during a finite-time experiment, upon which we propose conditions to construct both ROMs and SFs simultaneously. These conditions are formulated as data-dependent semidefinite programs. We demonstrate that the data-driven ROMs obtained can be employed to synthesize controllers for the original unknown systems, ensuring that they satisfy high-level logic specifications. This is accomplished by first designing controllers for the data-driven ROMs and then translating the results back to the original systems via interface functions, designed directly from the proposed data-dependent conditions. We evaluate the efficacy of our data-driven framework through two case studies, including a challenging benchmark from the model reduction literature: a circuit of chained inverter gates with 20 state variables.

2025-07-24T06:45:19Z Behrad Samari Henrik Sandberg Karl H. Johansson Abolfazl Lavaei http://arxiv.org/abs/2603.16146v1 2026-03-17T05:53:09Z

Model-based design of experiments (MBDOE) is essential for efficient parameter estimation in nonlinear dynamical systems. However, conventional adaptive MBDOE requires costly posterior inference and design optimization between each experimental step, precluding real-time applications. We address this by combining Deep Adaptive Design (DAD), which amortizes sequential design into a neural network policy trained offline, with differentiable mechanistic models. For dynamical systems with known governing equations but uncertain parameters, we extend sequential contrastive training objectives to handle nuisance parameters and propose a transformer-based policy architecture that respects the temporal structure of dynamical systems. We demonstrate the approach on four systems of increasing complexity: a fed-batch bioreactor with Monod kinetics, a Haldane bioreactor with uncertain substrate inhibition, a two-compartment pharmacokinetic model with nuisance clearance parameters, and a DC motor for real-time deployment.

2026-03-17T05:53:09Z Arno Strouwen Sebastian Micluţa-Câmpeanu