https://arxiv.org/api/D+y234hYRhIw9yq6GwQKrAVqP8A2026-09-11T20:49:49Z419984515http://arxiv.org/abs/2603.29745v2RHINO-MAG: Recursive H-Field Inference based on Observed Magnetic Flux Density under Dynamic Excitation2026-09-09T16:37:50ZDriven by the MagNet Challenge 2025 (MC2), increased research interest is directed towards modeling transient magnetic fields within ferrite materials. An accurate time-resolved and temperature-aware H-field prediction is essential for optimizing magnetic components in applications with quasi-stationary / non-stationary excitation waveforms. Within the scope of this investigation, a selection of model architectures with varying degrees of physically motivated structure is compared. Based on a Pareto investigation, a rather black-box gated recurrent unit (GRU) model structure with a graceful initialization setup is found to offer the most attractive model size vs. model accuracy trade-off in the small-model regime, while the examined physics-inspired models performed worse. For a GRU-based model architecture with only 325 parameters (trained separately per material), an average sequence relative error of 8.02 % and an average normalized energy relative error of 1.07 % across five different materials are achieved on unseen test data. With this excellent parameter efficiency, the proposed model won the first place in the performance category of the MC2.2026-03-31T13:43:52ZHendrik VaterOliver SchweinsLukas HölschWilhelm KirchgässnerTill PiepenbrockOliver Wallscheidhttp://arxiv.org/abs/2609.10419v1Robust Continuous Human Activity Recognition Using Deep Learning and Distributed Radar Sensors2026-09-09T16:37:16ZContinuous human activity recognition (HAR) with distributed radar sensor networks is challenging because Doppler signatures depend strongly on aspect angle, the informativeness of individual radar views varies with motion direction, and activity transitions in uninterrupted sequences are often ambiguous. This paper proposes a ConvNeXt-MHSA-BiGRU framework for frame-wise continuous HAR from Doppler-time spectrograms acquired by five spatially distributed radar nodes. A shared ConvNeXt-inspired encoder extracts time-frequency representations from each radar stream, while radar-wise multi-head self attention (MHSA) models inter-node dependencies and adaptively fuses complementary views. RadarDropout and SpecAugment-style time-frequency masking regularize the network against unreliable radar views and local spectrogram perturbations, whereas stacked bidirectional gated recurrent units (BiGRUs) exploit temporal context for frame-wise classification across activity transitions. The framework is evaluated on nine activities performed by 14 participants using leave-one-person-out (L1PO) subject-independent testing with fivefold cross-validation. It achieves a mean L1PO test accuracy of 87.56% across the 14 held-out subjects and improves recognition performance over the published CNN-RNN baseline. The results demonstrate that combining modern spectrogram encoding, adaptive radar view fusion, and bidirectional temporal modeling provides an effective framework for continuous and distributed radar-based HAR.2026-09-09T16:37:16ZSohani Munteha HiamMohammad Soleymanihttp://arxiv.org/abs/2608.00080v3Passive AoA Estimation of COTS 5G NR Handsets from Uplink SRS: A Practical USRP-B210 Implementation2026-09-09T16:28:35ZThis paper presents a passive network-side framework for estimating the uplink angle of arrival (AoA) of unmodified commercial 5G handsets from native Sounding Reference Signal (SRS) transmissions. The proposed system operates on an srsRAN Project gNB and estimates AoA directly from the per-antenna SRS channel estimates using a calibrated two-element Universal Software Radio Peripheral (USRP) B210 receiver and a MUSIC-based estimator, requiring neither protocol modifications nor user-equipment cooperation. Independent SRS channel estimates enable simultaneous AoA estimation for up to four commercial handsets. The framework is evaluated through indoor and outdoor measurement campaigns. Indoor measurements on bands n40 and n78 achieve a root-mean-square error of 1.5 on n40 over a 30 broadside sector. Outdoor experiments in a live 5G standalone deployment demonstrate simultaneous multi-user operation and show that estimation accuracy is primarily governed by propagation conditions and received signalto-interference-plus-noise ratio (SINR) rather than transmitter distance. These results demonstrate the feasibility of passive uplink AoA estimation using native 5G signaling, low-cost SDR hardware, and commercial handsets.2026-07-29T14:54:45ZThe dataset for this manuscript and also prepared code will be uploaded to Zenodo and GitHub and will be updated here with new versionsRicardo N. Barrios-MuñozAzim AkhtarshenasDavid Gomez-BarqueroDavid López-Pérezhttp://arxiv.org/abs/2609.10334v1Dimensionality Reduction for Hyperspectral Image Classification2026-09-09T15:32:52ZThis paper addresses the issue of supervised classification in the context of hyperspectral satellite images. It deals with two fundamental aspects: dimensionality reduction of data and the selection of appropriate supervised classification techniques.
Firstly, we delve into dimensionality reduction, a critical step in simplifying the management of hyperspectral data. The reduction aims to decrease complexity in terms of memory and computing time. We examine two commonly used methods: Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA).
Subsequently, we explore the selection of the most suitable supervised classification algorithms for hyperspectral images. We compare the performance of three methods: K-Nearest Neighbors (KNN), Support Vector Machines (SVM), and Random Forest (RF) using real hyperspectral data. The results highlight that the combination of PCA and RF yields the highest overall accuracy and Kappa coefficient.2026-09-09T15:32:52ZPublished in 2024 8th International Conference on Image and Signal Processing and their Applications (ISPA), Biskra, Algeria2024 8th International Conference on Image and Signal Processing and their Applications (ISPA), Biskra, Algeria, 2024, pp. 1-6Mohamed CherifiAmmar MesloubMohammed Nabil El KorsoTayeb TouhamiAbdennour Hacine Gharbi10.1109/ISPA59904.2024.10536775http://arxiv.org/abs/2609.10300v1Shaping Delay-Doppler Ambiguity in Practical OFDM-ISAC2026-09-09T15:14:02ZOrthogonal frequency-division multiplexing (OFDM) is a key waveform for integrated sensing and communication (ISAC). Existing OFDM ambiguity analyses, however, typically assume fully occupied data-only waveforms, whereas practical frames contain direct-current and edge-guard nulls, fixed pilots, and random payload symbols. This mixed resource structure reshapes the self-ambiguity function and induces prominent sidelobes in the sensing region of interest (ROI). We therefore propose ROI-oriented deep block-unitary precoded OFDM (DBU-OFDM), which combines resource-specific trainable unitary transformations with dedicated sensing subcarriers to suppress ROI sidelobes while preserving the prescribed resource support. We develop a constraint-preserving parameterization capable of representing arbitrary unitary matrices and an ROI-aware sensing-support initialization. We prove periodic autocorrelation function (P-ACF) invariance under phase-only optimization and zero-delay Doppler-cut invariance under arbitrary unitary transformations. Numerical results corroborate the P-ACF optimality of cyclic-prefix OFDM (CP-OFDM) and provide numerical support for the conjecture that conventional OFDM is globally optimal in the considered aperiodic autocorrelation function (A-ACF) setting. Unitary pilot optimization improves the ROI peak-to-sidelobe ratio by over 2 dB, while combining it with dedicated sensing subcarriers yields gains ranging from several to tens of dB. Under the considered configuration, the A-ACF mode also provides substantially greater ROI ambiguity-shaping capability than the P-ACF mode.2026-09-09T15:14:02ZCheng LuoLuping XiangKun Yanghttp://arxiv.org/abs/2609.10279v1Efficient LOS-Sampled GNSS Direct Position Estimation: An Information-Loss CRB Analysis2026-09-09T14:58:54ZConventional Global Navigation Satellite System (GNSS) Direct Position Estimation (DPE) exploits raw intermediate-frequency (IF) data and provides a full-information Cramér-Rao Bound (CRB) benchmark, but its accumulated-correlation objective requires dense evaluations over a common Position, Velocity, and Time (PVT) search space. This paper proposes an efficient Line-of-Sight (LOS)-sampled DPE, where each satellite channel independently retains only PVT sample points aligned with its LOS direction. A residual-minimization estimator is formulated to resolve the mismatch between accumulated-correlation metrics and per-satellite LOS sampling. The Fisher information matrix (FIM) and information-loss CRB of LOS-sampled DPE are derived, quantifying the information loss determined by LOS sampling parameters. Theoretical analysis, Monte Carlo simulations, and real experiments show that proper LOS sampling approaches the full-information CRB and practical performance of conventional DPE, while reducing the number of correlation evaluations from exponential to linear growth.2026-09-09T14:58:54Z5 pages, 3 figures. Submitted to IEEE for possible publicationWei GaoShanghai Jiao Tong University, Shanghai, ChinaRong YangShanghai Jiao Tong University, Shanghai, ChinaJihong HuangUniversity of Colorado Boulder, CO, USAXingqun ZhanShanghai Jiao Tong University, Shanghai, Chinahttp://arxiv.org/abs/2609.10241v1Spatial sparse sampling-based iterative optimization framework for GNSS Direct Position Estimation2026-09-09T14:32:54ZDirect position estimation (DPE), a promising technique in Global Navigation Satellite Systems (GNSS) receivers, enables estimation of position, velocity, and time (PVT) solutions directly from correlator outputs. The conventional grid search (GS)-based DPE is computationally intensive, as it relies solely on locating the peak of the cross ambiguity function (CAF), and it does not fully leverage the PVT information present in the correlation values. This paper proposes an iterative optimization DPE framework that capitalizes on spatial coherence and spatial gradient via spatial sparse sampling (SS). In SS-DPE framework, the correlation outputs of spatial sampled PVT points all serve as measurements, where the spatial gradient and spatial coherence are derived to capture the information density and diversity of different correlation values. The analytical Cramér-Rao Bound (CRB) is derived and indicates that both spatial coherence and gradient determine the theoretical performance limit via the noise covariance and Jacobian matrices analysis. The proposed theoretical framework not only validates the feasibility of sparse sampling but also guides weight optimization to distinct correlation values, effectively integrating these insights with a general gradient-based optimization. Theoretical derivations are validated via Monte Carlo simulations. Field experiments further demonstrate the practical feasibility of the proposed SS-DPE optimization framework. Comparative analysis shows that the proposed SS-DPE achieves comparable PVT estimation accuracy to the conventional GS-DPE while consumes only sparsely sampled correlation values, improving the information utilization efficiency and reducing the computation load.2026-09-09T14:32:54Z13 pages, 12 figures. Submitted to IEEE for possible publicationWei GaoShanghai Jiao Tong University, Shanghai, ChinaRong YangShanghai Jiao Tong University, Shanghai, ChinaJihong HuangUniversity of Colorado Boulder, CO, USAXingqun ZhanShanghai Jiao Tong University, Shanghai, ChinaYonggang ZhangHarbin Engineering University, Harbin, Chinahttp://arxiv.org/abs/2609.10207v1Covariance-Aware MM-PGD for Mixed Near-/Far-Field Activity Detection2026-09-09T14:07:57ZGrant-free activity detection with mixed near-field (NF) and far-field (FF) devices is an important problem that can be addressed via covariance-based detectors. The difficulty is that NF users induce device-specific structured spatial covariances, whereas FF users are well approximated by isotropic covariances. Under a unified Rician model, we first formulate activity detection as a relaxed maximum-likelihood problem in the full LM-dimensional vectorized observation space. We then develop a covariance-aware majorization-minimization projected gradient descent (MM-PGD) detector. It updates the full activity vector jointly and avoids the per-coordinate high-rank subproblems that arise in the NF regime. Numerical results over SNR, antenna-count, and NF-ratio sweeps show that MM-PGD achieves up to 20x lower miss-detection probability than the strongest coordinate-wise baseline. The advantage is most pronounced at high NF ratios, while in the all-FF case MM-PGD performs on par with the strongest coordinate-wise baseline.2026-09-09T14:07:57Z5 pages, 3 figures. IEEE International Workshop on Signal Processing Advances in Wireless Communications (SPAWC), 2026Xinjue WangZhi-Yong WangSergiy A. VorobyovEsa OllilaGayan Amarasuriya Aruma BadugeMojtaba Vaezihttp://arxiv.org/abs/2609.10182v1Distributed ToA Localization of Acoustic Sources with Unknown Time of Emission via Operator Splitting2026-09-09T13:51:44ZLocalization of non-cooperative acoustic sources using multiple spatially distributed receivers is critical for applications such as marine-life tracking, search-and-rescue operations, and maritime security in underwater environments. In conventional Time of Arrival (ToA) systems, the emission time is typically known explicitly or implicitly through clock synchronization or two-way communication, so the problem reduces to range-based localization. In passive settings, however, only reception timestamps are available. Thus, the emission time must be eliminated through Time Difference of Arrival (TDoA) preprocessing or estimated jointly with the source position. For the case of a single source, we address the distributed localization problem over a receiver network by reformulating passive localization directly as a ToA problem with unknown time of signal emission. This yields a distributed consensus optimization problem, which we solve using an operator-splitting method, namely an edge-based Distributed Alternating Direction Method of Multipliers (DADMM) scheme that decomposes the estimation task into local subproblems coupled through agreement constraints. We derive closed-form local update equations for the local DADMM subproblems and establish convergence properties for a smoothed approximation of the measurement model. Numerical simulations illustrate the efficacy of the proposed approach.2026-09-09T13:51:44Z8 pages, 8 figures, This work has been accepted to CDC 2026 conference for publicationAnton TolstonogovInstituto Superior Técnico, University of LisbonDavid CabecinhasInstituto Superior Técnico, University of LisbonPedro BatistaInstituto Superior Técnico, University of LisbonAntonio PascoalInstituto Superior Técnico, University of Lisbonhttp://arxiv.org/abs/2609.10136v1Low-Complexity Maximum Likelihood Detection for Type-Based Over-the-Air Computation2026-09-09T13:16:37ZType-based multiple access (TBMA) is a digital over-the-air computation (OAC) scheme that exploits symbol collisions over the wireless multiple-access channel to construct a histogram of the transmitted data at the receiver. This paper addresses the optimal detection of the transmitted histogram in TBMA over an additive white Gaussian noise (AWGN) channel. Since the number of possible received histograms grows combinatorially with both the number of transmitters and the data alphabet size, maximum-likelihood (ML) detection renders computationally infeasible. We prove that the ML detection problem can be solved by a greedy algorithm based on successive interference cancellation (SIC). We derive the analytical mean squared error (MSE) of the ML detector and show that it decreases exponentially with the SNR. Numerical results validate the theoretical analysis and demonstrate that TBMA achieves superior performance compared with conventional analog OAC, particularly for nonlinear functions.2026-09-09T13:16:37ZPaper submitted for publication to ICASSP 2027Marc Martinez-GostMiguel Ángel LagunasAna Pérez-Neirahttp://arxiv.org/abs/2609.10124v1Sequential Transmit Covariance Optimization for Wireless Tracking Exploiting Observation History2026-09-09T13:01:17ZThis paper studies a multiple-input multiple-output (MIMO) radar tracking system, where a multi-antenna base station (BS) aims to track the location of a moving target over multiple time slots based on the observed echo signals, initial prior probability density function (PDF) of the target state, and state evolution model. By exploiting the realized observation history in the past time slots, the BS sequentially updates the predictive state information and designs the transmit covariance matrix before collecting the current echo observation. Considering a Gaussian random-walk model for the target location and a Gauss-Markov model for the complex radar cross-section (RCS) coefficient, we propose an effective method to characterize the predictive PDF conditioned on the realized observation history via Gaussian approximation. Based on this, we derive the conditional posterior Fisher information matrix (PFIM) for the target state, and further characterize the conditional posterior Cramér-Rao bound (PCRB) for the mean-squared error (MSE) in estimating the target's location state as an explicit expression of the transmit covariance matrix. Next, we formulate the sequential transmit covariance matrix optimization problem to minimize the conditional PCRB for each time slot. Despite the non-convexity of the problem, we obtain the optimal solution via the Schur complement technique. Numerical results show that the proposed design effectively exploits the realized observation history, achieves a lower conditional PCRB than the benchmark schemes, and improves tracking accuracy over time.2026-09-09T13:01:17ZTo appear in Proc. IEEE Global Communications Conference (GLOBECOM), 2026Kaiyue HouShuowen Zhanghttp://arxiv.org/abs/2609.10056v1Accelerating A*-Based Algorithms for Decoding Quantum Low-Density Parity-Check Codes2026-09-09T11:30:45ZQuantum low-density parity-check (QLDPC) codes represent a promising approach for error correction in quantum computing. The recently proposed Tesseract decoder uses the A* search algorithm that guarantees finding the most likely error pattern. However, practical implementations of Tesseract often involve an extremely large graph, and the inherently sequential nature of the search results in high computational overhead and long runtime. To improve decoding efficiency, we propose a two-stage decoding framework. First, a belief propagation (BP) decoder efficiently processes the syndrome. This step generates hard decisions (a binary error vector) and soft information (per-qubit confidence levels). In non-convergent BP cases, a gating mechanism examines the BP decoder's output to identify and filter out qubits with oscillating confidence values. In these cases, the refined output serves as input to Tesseract, which then attempts to identify and correct any residual errors. This hybrid approach leverages the high speed of BP decoding and delegates the more challenging decoding instances to Tesseract. Numerical results demonstrate a substantial reduction in overall decoding complexity while maintaining the logical error rate (LER) of the stand-alone Tesseract. Across all tested physical error rates, the proposed method achieves at least 5x reduction in the number of expanded nodes in the Tesseract, with a peak reduction of nearly 15x at a physical error rate of p = 0.05 for the [[126, 12, d < 11]] T1 code, and approximately 8.8x at p = 0.05 for the [[72, 12, 6]] bicycle bivariate (BB) code.2026-09-09T11:30:45ZAccepted for publication at IEEE PIMRC 2026Lamia YousFrancisco Garcia HerreroMark F. Flanaganhttp://arxiv.org/abs/2510.02800v2FSMA: Gateway-Controlled Access for Scalable LoRa Non-Terrestrial Networks2026-09-09T09:44:32ZLoRa-based non-terrestrial networks are rapidly becoming infrastructure for global IoT, with LEO satellites delivering direct-to-device connectivity and drone-mounted gateways serving precision agriculture, emergency response, and environmental monitoring. Both settings share a fundamental MAC-layer bottleneck: large coverage footprints cause thousands of devices to collide on the same channel, while gateway mobility induces rapid link variations, making link-unaware transmissions a persistent source of wasted airtime. These challenges demand random-access solutions, yet ALOHA provides no collision coordination, CSMA sensing fails beyond ~15 km, and BSMA's continuous busy tone consumes 80-90% of the channel capacity. We propose Free Signal Multiple Access (FSMA), a synchronization-free, gateway-controlled MAC protocol. Like a traffic signal, FSMA uses a single LoRa upchirp (FreeChirp) to indicate channel availability. By transmitting it at a lower spreading factor than the node uplink, FSMA implicitly filters weak-link nodes through channel reciprocity, reducing the collision window by 6-200x without synchronization, handshakes, or hardware modifications. Hardware experiments with 25 COTS LoRa nodes and a drone-mounted gateway demonstrate 2x higher throughput, 2.5-5x better packet reception ratio, and up to 5x improved energy efficiency. Large-scale simulations with real TLE-based satellite trajectories confirm scalability to 5000+ devices per satellite pass.2025-10-03T08:18:25Z11 pages, 18 figuresRohith Reddy VennamMaiyun ZhangRaghav SubbaramanDeepak VasishtDinesh Bharadiahttp://arxiv.org/abs/2609.03481v2Geometric Ceilings on Time-Frequency Masking for Single-Channel Separation2026-09-09T09:40:30ZMost single-channel separators estimate a source by applying a real gain to the mixture in each time-frequency bin. The optimum of that format, which the oracle masks used as bounds do not attain, is the orthogonal projection of the source onto the line spanned by the mixture, its residual set by the angle between them. Locating an estimator reduces to the block structure of a real-linear operator on stacked spectra, giving a chain of four nested classes whose three larger terms match three assumptions on the prior: zero means, circularity and absence of inter-frequency coupling. Held fixed the chain is a cascade of four orthogonal projections; refitted per frame it collapses onto its first term, attributing the whole residual to one missing real parameter per bin, the phase. When the phase posterior is symmetric about the mixture direction, the minimum mean-square estimate falls back onto the line, with gain the posterior mean of the oracle gain and excess error its variance. On MUSDB18 a posterior mean under a non-circular Gaussian-mixture prior leaves the class yet stays 11.44 dB under the per-frame ceiling, which four times as many components and 7.5x the data do not close; a closed-form gate attributes some 70% of it, in decibels, to the predicted variance. The widest fixed class stays 6.70 dB under the same ceiling. Leaving the class and minimising squared error are conflicting requests: the barrier lies in the criterion rather than in the prior.2026-09-03T07:38:02ZSubmitted to Digital Signal Processing (Elsevier), manuscript DSP-S-26-06261. 33 pages, 6 figures. Companion paper: What Selects, What Reconstructs (submitted to IEEE/ACM TASLP)Maxime Baeldehttp://arxiv.org/abs/2609.09844v1Semi-Cooperative Passive Integrated Sensing and Communication by Utilizing Physical Layer Information of 5G Signals2026-09-09T07:50:19ZIn recent years, integrated sensing and communication (ISAC) has attracted significant attention towards future cellular networks. Currently, various works have demonstrated sensing performance in existing wireless communication systems. Most of the demonstrations are based on passive type due to the radio regulatory. However, because of the difficulty in access to the communication protocol stacks in commercial cellular systems, the evaluation of the cellular communication signals for semi-cooperative passive ISAC is limited. In this paper, a semi-cooperative passive ISAC system is developed with open-source 5G framework and software-defined radio devices. And the performance is experimentally evaluated by utilizing the physical layer information of actual 5G signals from the developed system. In this system, communication is established with 5G signals and physical layer information are obtained and extracted for analysis. The performance of the system is verified by conducting experiments under several communication scenarios including the synchronization, pinging, and data transmission. Different physical layer information is collected, and the propagation characteristics are analyzed by a multi-path configuration. The experiment results demonstrated that variable bandwidths were utilized for different communication scenarios and the multipath was successfully detected with two different approaches. These results show that the developed system is promising for semi-cooperative passive ISAC in wider application fields2026-09-09T07:50:19ZBo WeiRyusei OganeHang Song