https://arxiv.org/api/Z8yFOAvOjCugL1wNK7JeDq7apEg2026-03-22T17:05:36Z2679616515http://arxiv.org/abs/2504.16729v2MEC Task Offloading in AIoT: A User-Centric DRL Model Splitting Inference Scheme2026-03-05T11:47:51ZWith the rapid development of the Artificial Intelligence of Things (AIoT), mobile edge computing (MEC) becomes an essential technology underpinning AIoT applications. However, multi-angle resource constraints, multi-user task competition, and the complexity of task offloading decisions in dynamic MEC environments present new technical challenges. Therefore, a user-centric deep reinforcement learning (DRL) model splitting inference scheme is proposed to address the problem. This scheme combines model splitting inference technology and designs a UCMS_MADDPG-based offloading algorithm to realize efficient model splitting inference responses in the dynamic MEC environment with multi-angle resource constraints. Specifically, we formulate a joint optimization problem that integrates resource allocation, server selection, and task offloading, aiming to minimize the weighted sum of task execution delay and energy consumption. We also introduce a user-server co-selection algorithm to address the selection issue between users and servers. Furthermore, we design an algorithm centered on user pre-decision to coordinate the outputs of continuous and discrete hybrid decisions, and introduce a priority sampling mechanism based on reward-error trade-off to optimize the experience replay mechanism of the network. Simulation results show that the proposed UCMS_MADDPG-based offloading algorithm demonstrates superior overall performance compared with other benchmark algorithms in dynamic environments.2025-04-23T14:01:36Z43 pages,13 figures,3 tablesWeixi LiRongzuo GuoYuning WangFangying Chenhttp://arxiv.org/abs/2603.04944v1Analysis of Proactive Uncoordinated Techniques to Mitigate Interference in FMCW Automotive Radars2026-03-05T08:41:51ZModern vehicles increasingly rely on advanced driver-assistance systems (ADAS), with radars playing a key role due to their cost-effectiveness and reliable performance. However, the growing number of radars operating in the same spectrum raises concerns about mutual interference, which could lead to system malfunctions and potential safety risks. This study focuses on a scenario in which all vehicles are equipped with frequency-modulated continuous-wave (FMCW) radars, and it assesses the impact of interference on radar functionality - expressed in terms of probability of failure - by considering both direct and reflected signals. The radars may employ one of the following proactive mitigation methods to reduce the impact of interference, all of which require no inter-vehicle coordination but differ in complexity: (i) random carrier-frequency hopping on a frame-by-frame basis, (ii) random carrier-frequency hopping on a chirp-by-chirp basis, and (iii) a directional, compass-based method specifically addressing interference from opposite directions, which can be combined with either of the two previous methods. In this work, we assume realistic simulated road traffic scenarios and develop a novel model that captures correlated interference and accounts for the main radar setting parameters. Results reveal that dense scenarios pose a high risk of radar malfunctions. Among the analyzed methods, chirp-by-chirp frequency hopping emerges as the most effective approach to mitigate interference and ensure system reliability, but only when combined with a sufficiently large bandwidth. The compass-based method, on the other hand, shows limited effectiveness and appears not worth the additional system complexity.2026-03-05T08:41:51ZAccepted for publication in the IEEE Transactions on Radar SystemsAlessandro BazziFrancesco MiccoliFabrizio CuccoliLuca FacherisVincent Martinezhttp://arxiv.org/abs/2603.04898v1U-Parking: Distributed UWB-Assisted Autonomous Parking System with Robust Localization and Intelligent Planning2026-03-05T07:38:51ZThis demonstration presents U-Parking, a distributed Ultra-Wideband (UWB)-assisted autonomous parking system. By integrating Large Language Models (LLMs)-assisted planning with robust fusion localization and trajectory tracking, it enables reliable automated parking in challenging indoor environments, as validated through real-vehicle demonstrations.2026-03-05T07:38:51ZThis paper has been accepted by infocom. The source code has been released at: https://github.com/qiongwu86/U-ParkingYiang WuQiong WuPingyi FanKezhi WangWen ChenGuoqiang MaoKhaled B. Letaiefhttp://arxiv.org/abs/2603.04788v1Adaptive Personalized Federated Reinforcement Learning for RIS-Assisted Aerial Relays in SAGINs with Fluid Antennas2026-03-05T04:08:41ZSpace-air-ground integrated networks (SAGINs) interconnect satellites, uncrewed aerial vehicles (UAVs), and ground devices to enable flexible and ubiquitous wireless services. The integration of reconfigurable intelligent surfaces (RISs) and fluid antenna systems (FASs) further enhances radio environment controllability. However, the tight integration of cross-layer facilities and radio enhancement technologies leads to pronounced environmental dynamics and heterogeneity, posing fundamental challenges for system modeling and optimization in large-scale SAGINs. This paper investigates a SAGIN in which low Earth orbit (LEO) satellite constellations communicate with multiple ground hotspots via RIS-assisted UAV relays, serving both FAS-equipped and conventional users. A system model is developed that explicitly captures satellite mobility, UAV trajectories, RIS phase control, and heterogeneous user reception capabilities. Accordingly, a multi-hotspot downlink rate maximization problem is studied, whose solvability is analyzed through a hierarchical Stackelberg game. To address heterogeneous and time-varying multi-hotspot environments, an adaptive personalized federated reinforcement learning (FRL) algorithm is proposed for adaptive optimization of UAV trajectories and RIS phase controls. Simulation results demonstrate superior performance and validate the effectiveness of personalization in dynamic heterogeneous SAGIN scenarios.2026-03-05T04:08:41Zunder review at IEEE Transactions on Mobile ComputingYuxuan YangBin LyuAbbas Jamalipourhttp://arxiv.org/abs/2603.04779v1Selfish Cooperation Towards Low-Altitude Economy: Integrated Multi-Service Deployment with Resilient Federated Reinforcement Learning2026-03-05T03:53:24ZThe low-altitude economy (LAE) is a rapidly emerging paradigm that builds a service-centric economic ecosystem through large-scale and sustainable uncrewed aerial vehicle (UAV)-enabled service provisioning, reflecting the transition of the 6G era from technological advancement toward commercial deployment. The significant market potential of LAE attracts an increasing number of service providers (SPs), resulting in intensified competition in service deployment. In this paper, we study a realistic LAE scenario in which multiple SPs dynamically deploy UAVs to deliver multiple services to user hotspots, aiming to jointly optimize communication and computation resource allocation. To resolve deployment competition among SPs, an authenticity-guaranteed auction mechanism is designed, and game-theoretic analysis is conducted to establish the solvability of the proposed resource allocation problem. Furthermore, a resilient federated reinforcement learning (FRL)-based solution is developed with strong fault tolerance, effectively countering transmission errors and malicious competition while facilitating potential cooperation among self-interested SPs. Simulation results demonstrate that the proposed approach significantly improves service performance and robustness compared with baseline methods, providing a practical and scalable solution for competitive LAE service deployment.2026-03-05T03:53:24Zunder review at IEEE Transactions on Vehicular TechnologyYuxuan YangBin LyuAbbas Jamalipourhttp://arxiv.org/abs/2603.04777v1Body-scale NFC for wearables: human-centric body-scale NFC networking for ultra-low-power wearable devices (Demo of UTokyo Kawahara Lab 2025)2026-03-05T03:51:19ZNear Field Communication (NFC) is a promising technology for ultra-low-power wearables, yet its short communication range limits its use to narrow-area, point-to-point interactions. We propose a body-scale NFC networking system that extends NFC coverage around the body, enabling surface-to-multipoint communication with distributed NFC sensor tags. This demonstration introduces two key technologies: Meander NFC and picoRing NFC. First, Meander NFC expands a clothing-based NFC networking area up to body scale while enabling a stable readout of small NFC tags occupying 1% of the coverage area. Meander NFC uses a meander coil which creates a spatially confined inductive field along the textile surface, ensuring robust coupling with small tags while preventing undesired electromagnetic body coupling. Second, picoRing NFC solves the weak inductive coupling caused by distance and size mismatches. By leveraging middle-range NFC and coil optimization, picoRing NFC extends the communication range to connect these disparate nodes between the ring and wristband.2026-03-05T03:51:19ZHideaki YamamotoYifan LiWakako YukitaTomoyuki YokotaTakao SomeyaRyo TakahashiYoshihiro Kawahara10.1145/3772363.3799126http://arxiv.org/abs/2603.04758v1Quantum Algorithms for Network Signal Coordination2026-03-05T03:14:52ZThere has been increasing interest in developing efficient quantum algorithms for hard classical problems. The Network Signal Coordination (NSC) problem is one such problem known to be NP complete. We implement Grover's search algorithm to solve the NSC problem to provide quadratic speedup. We further extend the algorithm to a Robust NSC formulation and analyse its complexity under both constant and polynomial-precision robustness parameters. The Robust NSC problem determines whether there exists a fraction (alpha) of solutions space that will lead to system delays less than a maximum threshold (K). The key contributions of this work are (1) development of a quantum algorithm for the NSC problem, and (2) a quantum algorithm for the Robust NSC problem whose iteration count is O(1/sqrt(alpha)), independent of the search space size, and (3) an extension to polynomial-precision robustness where alpha = alpha_o/p(N) decays polynomially with network size, retaining a quadratic quantum speedup. We demonstrate its implementation through simulation and on an actual quantum computer.2026-03-05T03:14:52ZVinayak DixitRichard Pechhttp://arxiv.org/abs/2405.06754v4Wall-Street: An Intelligent Vehicular Surface for Reliable mmWave Handover2026-03-04T22:34:00ZmmWave networks promise high bandwidth but face significant challenges in maintaining reliable connections for users moving at high speed. Frequent handovers, complex beam alignment, and signal blockage from car bodies lead to service interruptions and degraded performance. We present Wall-Street, a vehicle-mounted smart surface that enhances mmWave connectivity for in-vehicle users. Wall-Street improves mobility management by (1) steering outdoor mmWave signals into the vehicle for shared coverage and providing a single, collective handover for all users; (2) performing neighbor-cell search without interrupting data transfer, ensuring seamless handovers; and (3) connecting users to a new cell before disconnecting from the old cell for reliable cell transitions. We implemented and integrated Wall-Street into the COSMOS testbed. We collected PHY traces with multiple base station nodes and in-vehicle user nodes with a surface-mounted vehicle, driving on a nearby road. Our trace-driven ns-3 simulation demonstrates a throughput im- provement of up to 78% and a latency reduction of up to 34% over the standard Standalone handover scheme.2024-05-10T18:15:34Z15 pages, 21 figures, to appear in ACM MobiCom 2026Kun Woo ChoPrasanthi MaddalaIvan SeskarKyle Jamiesonhttp://arxiv.org/abs/2603.04653v1Quantum Time Synchronization of Star Networks2026-03-04T22:29:27ZWe extend the single source approach of Valencia et al in order to synchronize the clocks of an N user start network, connected both through fiber and in free space. Entangled photon pairs from a centralized SPDC source are distributed through a 1 by N splitter to four remote users arranged in a star topology. Using commercially available single photon detectors and time taggers, we achieve median time precision of 50 ps for atomic oscillators and 20 ps for GPS displayed oscillators in our Kalman models. Thus, we achieve three order of magnitude improvement over GPS alone. By monitoring the drift fo the correlation peaks over time, we also extract the frequency skew between users's local clocks to 35ps/s precision. From these measurements, e3ach user can compute its offset and drift relative to every other user, achieving full network synchronization without a central clock.2026-03-04T22:29:27ZBrian J. RollickZhensheng JiaBernardo A. Hubermanhttp://arxiv.org/abs/2603.04626v1Joint Visible Light and RF Backscatter Communications for Ambient IoT Network: Fundamentals, Applications, and Opportunities2026-03-04T21:42:13ZThe rapid growth of the Internet of Things (IoT) devices in the sixth-generation (6G) wireless networks raises significant generality and scalability challenges due to energy consumption, deployment complexity, and environmental impact. Ambient IoT (A-IoT), leveraging ambient energy harvesting (EH) for batteryless device operation, has emerged as a promising solution to address these challenges.Among various EH and communication techniques, visible light communication (VLC) integrated with ambient backscatter communication (AmBC) offers remarkable advantages, including energy neutrality, high reliability, and enhanced security. In this paper, we propose a joint VLC-AmBC architecture, emphasizing fundamental concepts, system designs, and practical implementations. We explore potential applications in environmental monitoring, healthcare, smart logistics, and secure communications. We present proof-of-concept demonstrations for three distinct types of ambient backscatter devices (AmBDs): EH-Only, VLC-Relay, and VLC-Control. Experimental results demonstrate the feasibility of implementing joint VLC-AmBC systems, highlighting their practical viability across various deployment scenarios. Finally, we outline future research directions, including integrated sensing and communication, as well as optimized energy-efficient deployment. Open issues, such as large-scale deployment challenges, are also discussed, thereby providing a clear roadmap for future developments in joint VLC-AmBC-enabled A-IoT ecosystems.2026-03-04T21:42:13Z7 pages, 5 figures, 1 tableBoxuan XieYifan ZhangKalle KoskinenAlexis A. DowhuszkoJiacheng WangRuichen ZhangZehui XiongDusit NiyatoZhu HanRiku Jänttihttp://arxiv.org/abs/2602.10125v4How segmented is my network?2026-03-04T20:57:18ZNetwork segmentation is a popular security practice for limiting lateral movement, yet practitioners lack a metric to measure how segmented a network actually is. We define segmentedness as the fraction of potential node-pair communications disallowed by policy -- equivalently, the complement of graph edge density -- and show it to be the first statistically principled scalar metric for this purpose. Then, we derive a normalized estimator for segmentedness and evaluate its uncertainty using confidence intervals. For a 95\% confidence interval with a margin-of-error of $\pm 0.1$, we show that a minimum of $M=97$ sampled node pairs is sufficient. This result is independent of the total number of nodes in the network, provided that node pairs are sampled uniformly at random. We evaluate the estimator through Monte Carlo simulations on Erdős--Rényi, stochastic block models, and real-world enterprise network datasets, demonstrating accurate estimation. Finally, we discuss applications of the estimator, such as baseline tracking, zero trust assessment, and merger integration.2026-01-31T15:28:09Z5 Tables, 5 FiguresRohit Dubehttp://arxiv.org/abs/2603.04550v1Transformer-Based Multipath Congestion Control: A Decoupled Approach for Wireless Uplinks2026-03-04T19:34:11ZThe proliferation of artificial intelligence applications on edge devices necessitates efficient transport protocols that leverage multi-homed connectivity across heterogeneous networks. While Multipath TCP enables bandwidth aggregation, its in-kernel congestion control mechanisms lack the programmability and flexibility needed for achieving efficient transmission. Additionally, inherent measurement noise renders network state partially observable, challenging data-driven approaches like deep reinforcement learning (DRL). To address these challenges, we propose a Transformer-based Congestion Control Optimization (TCCO) framework for multipath transport. TCCO employs a decoupled architecture that offloads control decisions to an external decision engine via a lightweight in-kernel client and user-space proxy, enabling edge devices to leverage external computational resources while maintaining TCP/IP compatibility. The Transformer-based DRL agent in the external decision engine uses self-attention to capture temporal dependencies, filter noise, and coordinate control across subflows through a unified policy. Extensive evaluation on both simulated and real dual-band Wi-Fi testbeds demonstrates that TCCO achieves superior adaptability and performance than state-of-the-art baselines, validating the feasibility and effectiveness of TCCO for wireless networks.2026-03-04T19:34:11Z13 pages, 14 figuresZongyuan ZhangTianyang DuanLiang WangZihan FangZheng LinYijun LuJiening WuXia DuMiao YangZhe ChenHeming CuiJun Luohttp://arxiv.org/abs/2603.04381v1A DualPI2 Module for Mahimahi: Behavioral Characterization and Cross-Platform Analysis2026-03-04T18:46:44ZLow Latency, Low Loss, and Scalable Throughput (L4S) is an emerging paradigm for latency control based on DualPI2 active queue management and scalable congestion control. While a Linux kernel implementation of DualPI2 is available, controlled and reproducible experimentation on L4S mechanisms can be facilitated by a modular, user-space alternative. In this paper, we present a DualPI2 module for the Mahimahi network emulator, designed to support extensible, component-level experimentation without kernel modification. We conduct a statistical behavioral characterization of the Mahimahi implementation by examining key metrics across diverse traffic patterns and network conditions, using the Linux kernel implementation as a reference baseline. Our analysis shows that behavioral alignment across execution environments is not automatic: identical DualPI2 parameterization does not guarantee identical dynamics. Instead, key control parameters exhibit environment-dependent sensitivity, leading to regime-dependent discrepancies across bandwidth-delay product (BDP) conditions. Through targeted parameter exploration, we identify configurations that improve cross-platform alignment in low BDP regimes, while revealing structural differences that persist under higher load. This work provides both a practical tool for experimental L4S research and empirical insight into cross-platform behavioral differences, highlighting the importance of systematic characterization and environment-aware parameter selection in emulation-based AQM studies.2026-03-04T18:46:44ZNawel AliouaLinghe ZhangAneesh GargFrancis Y. YanElizabeth Beldinghttp://arxiv.org/abs/2603.04368v1LLM-supported 3D Modeling Tool for Radio Radiance Field Reconstruction2026-03-04T18:33:26ZAccurate channel estimation is essential for massive multiple-input multiple-output (MIMO) technologies in next-generation wireless communications. Recently, the radio radiance field (RRF) has emerged as a promising approach for wireless channel modeling, offering a comprehensive spatial representation of channels based on environmental geometry. State-of-the-art RRF reconstruction methods, such as RF-3DGS, can render channel parameters, including gain, angle of arrival, angle of departure, and delay, within milliseconds. However, creating the required 3D environment typically demands precise measurements and advanced computer vision techniques, limiting accessibility. This paper introduces a locally deployable tool that simplifies 3D environment creation for RRF reconstruction. The system combines finetuned language models, generative 3D modeling frameworks, and Blender integration to enable intuitive, chat-based scene design. Specifically, T5-mini is finetuned for parsing user commands, while all-MiniLM-L6-v2 supports semantic retrieval from a local object library. For model generation, LLaMA-Mesh provides fast mesh creation, and Shap-E delivers high-quality outputs. A custom Blender export plugin ensures compatibility with the RF-3DGS pipeline. We demonstrate the tool by constructing 3D models of the NIST lobby and the UW-Madison wireless lab, followed by corresponding RRF reconstructions. This approach significantly reduces modeling complexity, enhancing the usability of RRF for wireless research and spectrum planning.2026-03-04T18:33:26ZSubmitted to an IEEE conferenceChengling XuHuiwen ZhangHaijian SunFeng Yehttp://arxiv.org/abs/2603.04361v1Service Function Chain Routing in LEO Networks Using Shortest-Path Delay Statistical Stability2026-03-04T18:28:03ZLow Earth orbit (LEO) satellite constellations have become a critical enabler for global coverage, utilizing numerous satellites orbiting Earth at high speeds. By decomposing complex network services into lightweight service functions, network function virtualization (NFV) transforms global network services into diverse service function chains (SFCs), coordinated by resource-constrained LEOs. However, the dynamic topology of satellite networks, marked by highly variable inter-satellite link delays, poses significant challenges for designing efficient routing strategies that ensure reliable and low-latency communication. Many existing routing methods suffer from poor scalability and degraded performance, limiting their practical implementation. To address these challenges, this paper proposes a novel SFC routing approach that leverages the statistical properties of network link states to mitigate instability caused by instantaneous modeling in dynamic satellite networks. Through comprehensive simulations on end-to-end shortest-path propagation delays in LEO networks, we identify and validate the statistical stability of multi-hop routes. Building on this insight, we introduce the Stability-Aware Multi-Stage Graph Routing (SA-MSGR) algorithm, which incorporates pre-computed average delays into a multi-stage graph optimization framework. Extensive simulations demonstrate the superior performance of SA-MSGR, achieving significantly lower and more predictable end-to-end SFC delays compared to representative baseline strategies.2026-03-04T18:28:03ZLi ZengZixin WangYuanming ShiKhaled B. Letaief