https://arxiv.org/api/csAQ/g0N4qhrHScHAcOg5tZnvKA2026-06-10T05:58:42Z808812015http://arxiv.org/abs/2604.26068v1Calibrated Persistent Homology Tests for High-dimensional Collapse Detection2026-04-28T19:09:27ZWe study detection of collapse in high-dimensional point clouds, where mass concentrates near a lower-dimensional set relative to a non-collapsed geometry. We propose persistent homology-based test statistics under two well-studied filtrations, with cutoffs calibrated under a broad set of non-collapsed reference models. We benchmark power across three alternative collapse mechanisms (linear/spectral, nonlinear-support, and contamination/heterogeneity) and distill the results into a mechanism map guiding the choice of filtration and statistic.2026-04-28T19:09:27ZAccepted at CG Week 2026Alexander Kalinowskihttp://arxiv.org/abs/2506.22263v2The Walk-Length Filtration for Persistent Homology on Weighted Directed Graphs2026-04-28T18:41:57ZDirected graphs arise in many applications where computing persistent homology helps to encode the shape and structure of the input information. However, there are only a few ways to turn the directed graph information into an undirected simplicial complex filtration required by the standard persistent homology framework. In this paper, we present a new filtration constructed from a directed graph, called the walk-length filtration. This filtration mirrors the behavior of small walks visiting certain collections of vertices in the directed graph. We show that, while the persistence is not stable under the usual $L_\infty$-style network distance, a generalized $L_1$-style distance is, indeed, stable. We further provide an algorithm for its computation, and investigate the behavior of this filtration in examples, including cycle networks and synthetic hippocampal networks with a focus on comparison to the often used Dowker filtration.2025-06-27T14:30:51ZDavid E. MuñozElizabeth MunchFiras A. Khasawnehhttp://arxiv.org/abs/2604.25695v1Point Group Symmetry of Polyhedral Diagrams in Graphic Statics2026-04-28T14:22:38ZSymmetry is an implicit objective in structural form-finding that often reconciles efficiency and aesthetics. This paper identifies the symmetry of polyhedral diagrams in three-dimensional graphic statics (3DGS) as point groups and formulates them as constraints, enabling the optimization and manipulation of polyhedral diagrams that preserve such symmetry. 3DGS has been an efficient and effective tool for the form-finding of funicular structures. However, when modifying complex diagrams for design exploration or optimization, one can easily break the symmetry of the reciprocal design input, rendering the result undesirable for practical use. To address this problem, this paper investigates symmetry transformations and introduces point groups, an abstract algebra tool commonly used in crystallography to represent the symmetry and equivalence between a network of atoms (points with labels). It then discusses the hierarchy of symmetry in the geometry types of a polyhedral diagram, and proposes the constraint of symmetry through edge lengths. Based on the crystal symmetry search algorithm by spglib and pymatgen, a fast fingerprinting algorithm is developed to identify the point group of a polyhedral diagram and sort equivalent edges into sets. Finally, the paper shows that the necessary and sufficient condition for preserving the point group symmetry is that each set of edges has the same length. This constraint is compatible with the algebraic formulation of 3DGS and effectively preserves symmetry while reducing the dimension of the solution space. The method is implemented in the PolyFrame 2 plug-in for Rhino and Grasshopper.2026-04-28T14:22:38ZYefan ZhiYao LuMasoud Akbarzadehhttp://arxiv.org/abs/2604.25397v1A dynamic $(1+\varepsilon)$-spanner for disk intersection graphs2026-04-28T09:07:25ZWe maintain a $(1+\varepsilon)$-spanner over the disk intersection graph of a dynamic set of disks. We restrict all disks to have their diameter in $[4,Ψ]$ for some fixed and known $Ψ$. The resulting $(1+\varepsilon)$-spanner has size $O(n \varepsilon^{-2} \log Ψ\log (\varepsilon^{-1}))$, where $n$ is the present number of disks.
We develop a novel use of persistent data structures to dynamically maintain our $(1+\varepsilon)$-spanner. Our approach requires $O(\varepsilon^{-2} n \log^4 n \log Ψ)$ space and has an $O( \left( \fracΨ{\varepsilon} \right)^2 \log^4 n \log^2 Ψ\log^2 (\varepsilon^{-1}))$ expected amortised update time. For constant $\varepsilon$ and $Ψ$, this spanner has near-linear size, uses near-linear space and has polylogarithmic update time. Furthermore, we observe that for any $\varepsilon < 1$, our spanner also serves as a connectivity data structure. With a slight adaptation of our techniques, this leads to better bounds for dynamically supporting connectivity queries in a disk intersection graph. In particular, we improve the space usage when compared to the dynamic data structure of (Baumann et al., DCG'24), replacing the linear dependency on $Ψ$ by a polylogarithmic dependency. Finally, we generalise our results to $d$-dimensional hypercubes.2026-04-28T09:07:25ZSarita de BergIvor van der HoogEva RotenbergJohanne M. VistisenSampson Wonghttp://arxiv.org/abs/2603.18929v2On the Duality of Coverings in Hilbert Geometry2026-04-27T15:12:07ZWe prove polarity duality for covering problems in Hilbert geometry. Let $G$ and $K$ be convex bodies in $\mathbb{R}^d$ where $G \subset \operatorname{int}(K)$ and $\operatorname{int}(G)$ contains the origin. Let $N^H_K(G,α)$ and $S^H_K(G,α)$ denote, respectively, the minimum numbers of radius-$α$ Hilbert balls in the geometry induced by $K$ needed to cover $G$ and $\partial G$. Our main result is a Hilbert-geometric analogue of the König-Milman covering duality: there exists an absolute constant $c \geq 1$ such that for any $α\in (0,1]$, \[
c^{-d}\,N^H_{G^{\circ}}(K^{\circ},α)
~ \leq ~ N^H_K(G,α)
~ \leq ~ c^{d}\,N^H_{G^{\circ}}(K^{\circ},α), \] and likewise, \[
c^{-d}\,S^H_{G^{\circ}}(K^{\circ},α)
~ \leq ~ S^H_K(G,α)
~ \leq ~ c^{d}\,S^H_{G^{\circ}}(K^{\circ},α). \] We also recover the classical volumetric duality for translative coverings of centered convex bodies, and obtain a new boundary-covering duality in that setting.
The Hilbert setting is subtler than the translative one because the metric is not translation invariant, and the local Finsler unit ball depends on the base point. The proof involves several ideas, including $α$-expansions, a stability lemma that controls the interaction between polarity and expansion, and, in the boundary case, a localized relative isoperimetric argument combined with Holmes--Thompson area estimates. In addition, we provide an alternative proof of Faifman's polarity bounds for Holmes--Thompson volume and area in the Funk and Hilbert geometries.2026-03-19T14:08:39ZSunil AryaDavid M. Mounthttp://arxiv.org/abs/2604.24445v1Second gonality of smooth aCM curves on quartic surfaces in $\mathbb{P}^3$2026-04-27T13:12:00ZFor a smooth irreducible curve $C$, its second gonality $d_2$ is defined to be the minimum integer $d$ such that $C$ admits a linear series $g_d^2$. In this paper, we compute the second gonality of a smooth aCM curve $C$ lying on a smooth quartic surface in $\mathbb{P}^3$, whose Clifford index is computed by a net on $C$.2026-04-27T13:12:00Z19 pagesKenta Watanabehttp://arxiv.org/abs/2506.01432v4New aspects of quantum topological data analysis: Betti number estimation, and testing and tracking of homology and cohomology classes2026-04-27T09:33:29ZWe introduce several new quantum algorithms for estimating homological invariants, specifically Betti numbers and persistent Betti numbers, of a simplicial complex given via a structured classical input. At the core of our algorithm lies the ability to efficiently construct the block-encoding of Laplacians (and persistent Laplacians) based on the classical description of the given complex. From such block-encodings, Betti numbers (and persistent Betti numbers) can be estimated. The complexity of our method is polylogarithmic in the number of simplices in both simplex-sparse and simplex-dense regimes, thus offering an advantage over existing works. Moreover, prior quantum algorithms based on spectral methods incur significant overhead due to their reliance on estimating the kernel of combinatorial Laplacians, particularly when the Betti number is small. We introduce a new approach for estimating Betti numbers based on homology tracking and homology property testing, which enables exponential quantum speedups over both classical and prior quantum approaches under sparsity and structure assumptions. We further initiate the study of homology triviality and equivalence testing as natural property testing problems in topological data analysis, and provide efficient quantum algorithms with time complexity nearly linear in the number of simplices when the rank of the boundary operator is large. In addition, we develop a cohomological approach based on block-encoded projections onto cocycle spaces, enabling rank-independent testing of homology equivalence. This yields the first quantum algorithms for constructing and manipulating r-cocycles in time polylogarithmic in the size of the complex. Together, these results establish a new direction in quantum topological data analysis and demonstrate that computing topological invariants can serve as a fertile ground for provable quantum advantage.2025-06-02T08:43:58Z55 pages, 1 figureNhat A. Nghiemhttp://arxiv.org/abs/2604.24135v1Near-tight Bounds for Computing the Fréchet Distance in d-Dimensional Grid Graphs and the Implications for λ-low Dense Curves2026-04-27T07:42:51ZThe Fréchet distance is a popular distance measure between trajectories or curves in space, or between walks in graphs. We study computing the Fréchet distance between walks in the $d$-dimensional grid graphs, i.e. $\mathbb{Z}^d$ where points share an edge if they differ by one in one coordinate.
We give an algorithm, that for two simple paths on $n$ vertices, $(1+\varepsilon)$-approximates the Fréchet distance in time $\widetilde{O}((\frac{n}{\varepsilon})^{2-2/d} +n)$. We complement this by a near-matching fine-grained lower bound: for constant dimensions $d \geq 3$, there is no $O((\varepsilon^{2/d}(\frac{n}{\varepsilon})^{2-2/d})^{1-δ})$ algorithm for any $δ>0$ unless the Orthogonal Vector Hypothesis fails. Thus, our results are tight up to a factor $\varepsilon^{2/d}$ and $\log(n)$-factors. We extend our results to imbalanced lower and upper bounds, where the curves have $n$ and $m$ vertices respectively, and also obtain near-tight bounds.
Driemel, Har-Peled and Wenk [DCG'12] studied \emph{realistic assumptions} for curves to speed up Fréchet distance computation. One of these assumptions is $λ$-low density and they can compute a $(1+\varepsilon)$-approximation between $λ$-low dense curves in time $\widetilde{O}( \varepsilon^{-2} λ^2 n^{2(1-1/d)})$. By adapting our lower bound, we show that their algorithm has a tight dependency on $n$ and a tight dependency on $\varepsilon$ as $d$ goes to infinity. A gap remains in terms of $λ$.2026-04-27T07:42:51ZJacobus ConradiIvor van der HoogFrederikke UldahlEva Rotenberghttp://arxiv.org/abs/2604.23330v1Bowties and Hourglasses: Intersections of Double-Wedges (or Stabbing and Avoiding Line Segments)2026-04-25T14:37:57ZWe study the common intersection of arrangements of double-wedges. We consider arrangements where double-wedges may be either bowties (which do not contain a vertical line) or hourglasses (which contain a vertical line), in contrast to earlier studies that focused on arrangements of only bowties. This generalization changes the setting drastically, in particular, with respect to all arguments involving the point-line duality. Namely, a point in the intersection of all double-wedges is equivalent to a line that stabs a set of segments $\mathcal{S}$ (corresponding to the bowties) while it avoids a different set of segments $\mathcal{A}$ (corresponding to the complement of the hourglasses).
We show that in this general setting, the intersection of $n$ double-wedges may consist of $Ω(n^2)$ interior-disjoint regions. Further, we discuss Gallai-type results for arrangements of segments and anti-segments, and we provide algorithms for computing the intersection of such arrangements with worst-case optimal running time. Finally, we also prove that we can find a single intersection point in almost optimal running time, assuming that 3SUM admits no truly subquadratic-time algorithm.2026-04-25T14:37:57ZDaniel BertschingerHenry FörsterFabian KluteIrene ParadaPatrick SchniderBirgit Vogtenhuberhttp://arxiv.org/abs/2604.23171v1Single-Source Shortest Paths and Almost Exact Diameter in Pseudodisk Graphs2026-04-25T06:54:49ZWe study SINGLE-SOURCE SHORTEST PATH (SSSP) on unweighted intersection graphs whose node set corresponds to a set of $n$ constant-complexity objects in the plane. We prove SSSP can be solved in $O(U(n)\ \mathrm{polylog}\,n)$ expected time for any class of objects whose union complexity is $U(n)$. In particular, we obtain an $O(n 2^{α(n)}\log^2 n)$ algorithm for arbitrary pseudodisks, and an $O(λ_{s+2}(n)2^{O(\log^* n)} \log^2 n)$ algorithm for locally fat objects. This significantly extends the class of objects for which SSSP can be solved in $O(n\ \mathrm{polylog}\, n)$ time: so far, $O(n\ \mathrm{polylog}\, n)$ SSSP algorithms were not even known for pseudodisks that are fat and convex and similarly-sized.
Our second result concerns the DIAMETER problem, which asks for the maximum distance between any two nodes in a graph. Even for intersection graphs, near-quadratic algorithms are difficult to obtain, and the $O(n^2\ \mathrm{polylog}\, n)$ running time that follows from our SSSP algorithm is the first near-quadratic running time for such general classes of intersection graphs. Obtaining subquadratic running time is even more challenging. We prove that the diameter of a set of arbitrary pseudodisks can be computed almost exactly, namely up to an additive error of 2, in $\tilde{O}(n^{2-1/14})$ expected time. This generalizes and speeds up a recent algorithm by Chang, Gao, and Le~(SoCG 2024) that works for similarly-sized disks (or similarly-sized pseudodisks that are fat and satisfy a strong monotonicity assumption) and runs in $\tilde{O}(n^{2-1/18})$ time. To this end, we develop a so-called star-based $r$-clustering for intersection graphs of pseudodisks, which is interesting in its own right. Our star-based $r$-clustering can also be used to obtain an almost exact distance oracle for pseudodisks that uses $O(n^{2-1/13})$ storage and has $O(1)$ query time.2026-04-25T06:54:49Z31 pages, 6 figuresMark de BergBart M. P. JansenJeroen S. K. Lammehttp://arxiv.org/abs/2604.23021v1The Prophet and the Voronoi Diagram2026-04-24T21:19:11ZConsider a stream of $n$ random points (say, from the unit square) arriving one by one, where a player has to make an irreversible immediate decision for each arriving point whether to pick it. The player has to pick a single point, and the payoff is the area of the cell of the picked point, in the final Voronoi diagram of \emph{all} the points. We show that there is a simple strategy so that with probability $\geq 1 - \tilde O(1/\sqrt{n})$, the player's payoff is only a constant factor smaller than the optimal choice (i.e., the one made by the prophet). This competitiveness is somewhat surprising, as this payoff is larger by a factor of $Θ( \log n)$ than the average payoff.2026-04-24T21:19:11ZSariel Har-Peledhttp://arxiv.org/abs/2505.20435v3The Shape of Adversarial Influence: Characterizing LLM Latent Spaces with Persistent Homology2026-04-24T16:05:30ZExisting interpretability methods for Large Language Models (LLMs) predominantly capture linear directions or isolated features. This overlooks the high-dimensional, relational, and nonlinear geometry of model representations. We apply persistent homology (PH) to characterize how adversarial inputs reshape the geometry and topology of internal representation spaces of LLMs. This phenomenon, especially when considered across operationally different attack modes, remains poorly understood. We analyze six models (3.8B to 70B parameters) under two distinct attacks, indirect prompt injection and backdoor fine--tuning, and show that a consistent topological signature persists throughout. Adversarial inputs induce topological compression, where the latent space becomes structurally simpler, collapsing the latent space from varied, compact, small-scale features into fewer, dominant, large-scale ones. This signature is architecture-agnostic, emerges early in the network, and is highly discriminative across layers. By quantifying the shape of activation point clouds and neuron-level information flow, our framework reveals geometric invariants of representational change that complement existing linear interpretability methods.2025-05-26T18:31:49ZAideen FayInés García-RedondoQiquan WangHaim DubossarskyAnthea Monodhttp://arxiv.org/abs/2604.20137v1Optimization of Constrained Quasiconformal Mapping for Origami Design2026-04-22T03:07:32ZOrigami structures, particularly Miura-ori patterns, offer unique capabilities for surface approximation and deployable designs. In this study, a constrained mapping optimization algorithm is designed for designing surface-aligned Miura-ori via a narrow band approximation of the input surface. The Miura-fold, embedded in the narrow band, is parameterized to a planar domain, and a mapping is computed on the parameter pattern by optimizing certain energy terms and constraints. Extensive experiments are conducted, showing the significance and flexibility of our methods.2026-04-22T03:07:32ZKa Ho LaiHei Tung TsangGary P. T. ChoiLok Ming Luihttp://arxiv.org/abs/2604.20004v1A continuum of Künneth theorems for persistence modules2026-04-21T21:27:33ZWe develop new aspects of the homological algebra theory for persistence modules, in both the one-parameter and multi-parameter settings. For a poset $P$ and an order preserving map $\varphi:P\times P\to P$, we introduce a novel tensor product of persistence modules indexed by $P$, $\otimes_{\varphi}$. We prove that each $\otimes_{\varphi}$ has a right adjoint, $\mathbf{Hom}^{\varphi}$, the internal hom of persistence modules that also depends on $\varphi$. We prove that every $\otimes_{\varphi}$ yields a Künneth short exact sequence of chain complexes of persistence modules. Dually, the $\mathbf{Hom}^{\varphi}$ also has an associated Künneth short exact sequence in cohomology. As special cases both of these short exact sequences yield Universal Coefficient Theorems. We show how to apply these to chain complexes of persistence modules arising from filtered CW complexes.
For the special case of $P=\mathbb{R}_+$, the $p$-quasinorms for each $p\in (0,\infty]$ yield a distinct $\otimes_{\ell^p_c}$ and its adjoint $\mathbf{Hom}^{\ell^p_c}$. We compute their derived functors, $\mathbf{Tor}^{\ell^p_c}$ and $\mathbf{Ext}_{\ell^p_c}$ explicitly for interval modules. We show that the Universal Coefficient Theorem developed can be used to compute persistent Borel-Moore homology of a filtration of non-compact spaces. Finally, we show that for every $p\in [1,\infty]$ the associated Künneth short exact sequence can be used to significantly speed up and approximate persistent homology computations in a product metric space $(X\times Y,d^p)$ with the distance $d^p((x,y),(x',y'))=||d_X(x,x'),d_Y(y,y')||_p$.2026-04-21T21:27:33Z52 pages, 10 figuresNikola Milićevićhttp://arxiv.org/abs/2604.19586v1Monotile kirigami2026-04-21T15:38:11ZKirigami, the art of paper cutting, has been widely used in the modern design of mechanical metamaterials. In recent years, many kirigami-based metamaterials have been designed based on different planar tiling patterns and applied to different science and engineering problems. However, it is natural to ask whether one can create deployable kirigami structures based on the simplest forms of tilings, namely the monotile patterns. In this work, we answer this question by proving the existence of periodic and aperiodic monotile kirigami structures via explicit constructions. In particular, we present a comprehensive collection of periodic monotile kirigami structures covering all 17 wallpaper groups and aperiodic monotile kirigami structures covering various quasicrystal patterns as well as polykite tilings. We further perform theoretical and computational analyses of monotile kirigami patterns in terms of their shape and size changes under deployment. Altogether, our work paves a new way for the design and analysis of a wider range of shape-morphing metamaterials.2026-04-21T15:38:11ZHugo Hiu Chak ChengGary P. T. Choi