https://arxiv.org/api/6/M5RXFVhmC1FJFths6MHViEtkM 2026-06-10T07:41:13Z 45264 75 15 http://arxiv.org/abs/2606.04961v1 2026-06-03T14:47:09Z

We analyze residual frozen flux in a long narrow superconducting strip cooled through its transition temperature $T_{c}$ in a small perpendicular magnetic field. This problem is relevant for the issue of trapped magnetic flux in superconducting electronic devices. During cooling, the low-temperature vortex configuration is formed at temperatures very close to $T_{c}$, where the flux density is determined by dynamic balance between the thermally-activated exits and entries of vortices over the geometrical energy barrier formed by the interaction with the strip edges and the Meissner screening current. In the field range between the minimum flux-expulsion field and the penetration field, the equilibrium flux density is finite due to thermal activation and rapidly decreases with decreasing temperature. During cooling, however, the escape rate decreases exponentially, and the vortex density falls out of equilibrium at a field-dependent freezing temperature $T_{\mathrm{fr}}$. We derive and solve the dynamic-balance equation for this process, which yields definite quantitative results for $T_{\mathrm{fr}}$ and the frozen vortex density. The relative freezing temperature $1\!-\!T_{\mathrm{fr}}/T_{c}$ exceeds the fluctuation width of the transition by a large logarithmic factor, rapidly increases when the magnetic field approaches the minimum flux-expulsion field, and logarithmically increases with decreasing cooling rate. The resulting frozen flux density has a very strong magnetic-field dependence which can be used to define the effective flux-expulsion magnetic field.

2026-06-03T14:47:09Z 11 pages, 9 figures, Subm. Phys. Rev. B Alexei E. Koshelev http://arxiv.org/abs/2606.04791v1 2026-06-03T12:17:59Z

Dielectric confinement strengthens Coulomb correlations in quasi-two-dimensional electrolytes and can promote Bjerrum pairing in charge-neutral slits. Here we use a generalized Debye-Huckel-Bjerrum theory to show that weak surface charge changes this picture by stoichiometrically doping the slit with mobile counterions. These counterions maintain a finite screening floor, decouple microscopic pairing from macroscopic ionicity, and shift association-driven criticality to lower temperatures. The critical-temperature suppression collapses onto a single scaled perturbation variable, revealing how surface charge and dielectric confinement jointly control charged nanofluidic slits. Brownian-dynamics tests further show that the same counterions are not always fully bulk-like diffusive: at low intrinsic salt density, explicit wall charge slows in-plane diffusion, whereas at higher intrinsic density the wall-induced diffusion penalty decreases and the mobile-counterion description becomes dynamically accurate. These results identify surface charge as a thermodynamic doping field that tunes both correlated ionic stability and the diffusion mechanism in nanofluidic confinement.

2026-06-03T12:17:59Z 14 pages, 5 figures Na Shen Yabei Wu Wenqing Zhang http://arxiv.org/abs/2606.04766v1 2026-06-03T11:50:24Z

Multidomain proteins with flexible unstructured sequence regions are abundant in cellular signaling. This protein architecture enables self-assembly into supramolecular structures, but how structured interaction domains and overall protein architecture jointly regulate the assembly size, structure and kinetics remains unclear. Here we use the budding yeast protein Bem1 as a model multidomain system to show that supramolecular polymerization can be tuned by charge heterogeneity and protein architecture. We experimentally demonstrate that Bem1's isolated PB1 domain forms extended filaments, whereas full-length Bem1 forms substantially shorter assemblies, indicating that the PB1 domain drives assembly while the remaining protein architecture tunes filament length. To understand these observations, we develop minimal coarse-grained models approximating the PB1 as a polar 5-bead domain and the full-length Bem1 as a 6-bead model with an additional bead representing the remainder of Bem1. The weight distribution of supramolecular filaments assembled by the 5-bead model quantitatively follows reversible Flory-like polymerization theory, which is tunable within a narrow charge polarity regime. In contrast, the 6-bead model shifts chain-length distributions towards shorter polymers despite retaining the same driving domain. We show that this deviation arises from steric and geometric constraints imposed by the appended unstructured regions, where the rotational flexibility between the charge-polar structured domain and the unstructured region emerges as key physical parameter governing self-limited self-assembly. Together, our results establish charge polarity, protein architecture, and conformational flexibility as programmable control knobs for supramolecular polymerization and suggest a general framework for understanding how multidomain proteins assemble into tunable biomolecular structures.

2026-06-03T11:50:24Z Nynke Marije Hettema Meng Shen Frank van Opstal Emmett Lim Liedewij Laan http://arxiv.org/abs/2606.04622v1 2026-06-03T08:57:46Z

To date, natural and synthetic polymer-based microcapsules have been used extensively in various dermato-cosmetic applications, with an emphasis on the targeted delivery of active ingredients, including therapeutic and aesthetic interventions. Although numerous polymer candidates have been comprehensively investigated, polyurethane based microcapsules have received comparatively minor attention, despite possessing a multitude of intrinsic benefits. However, in recent years, although there has been an upsurge of studies involving polyurethane, predominantly as a capsule wall or shell component, towards tangible dermato-cosmetic applications, these are only intermittently documented. In the current review, we target this lacuna, explore, and collate only the most contemporary trends and advances (2017-to date) in the field. In addition, despite the significance, and pertaining to the acute deficiency of rheological studies targeting polyurethane-based microcapsules in dermato-cosmetic applications, we critically examine and lay a comprehensive interpretation, based on the current state-of-the-art, inevitability for systematic inquiries, and identification of several target domains that need urgent attention. Finally, we deliberate on the challenges and the impending projections from a diverse outlook. We focus on a steady and more sustainable path forward via incorporation of green raw materials, cumulative domain-optimized and customer-focused applications, and a significantly improved understanding of the microcapsule mechanical behavior via implementation of novel rheological characterization procedures.

2026-06-03T08:57:46Z 52 Pages, 11 Figures, 1 Table Transport Phenomena 2026; 1(1): 20260006 Sharadwata Pan Andreas Wierschem Natalie Germann Thomas Becker 10.1515/tp-2026-0006 http://arxiv.org/abs/2606.04605v1 2026-06-03T08:44:40Z

We use lubricated-flow discrete-element-method (LF-DEM) simulations to examine how contact-network organization shapes particle motion in dense shear-thickening suspensions. The primary system studied is a two-dimensional bidisperse monolayer where rigid clusters are identified by the $(3,3)$ pebble game; three-dimensional simulations are shown to have qualitatively similar rotational velocity statistics. Across the stress--solid-fraction state diagram, frictional contact number, $k\ge 3$ percolation, and rigid-cluster fluctuations all strengthen in the same region where translational velocity correlations grow, consistent with rigid clusters translating coherently while the surrounding non-rigid particles accommodate a disproportionate share of the local velocity gradient. Rotational motion provides a complementary view: non-affine angular-velocity distributions broaden, near-contact rotations become increasingly anti-correlated, and rigid and non-rigid particles carry distinct statistics. Connectivity, rigidity, and velocity correlations are related but distinct signatures of the constrained collective motion that accompanies shear-thickening and the approach to shear jamming.

2026-06-03T08:44:40Z Michel Orsi Rahul Pandare Brolin Adu-Poku Bulbul Chakraborty Jeffrey F. Morris http://arxiv.org/abs/2606.04533v1 2026-06-03T07:17:37Z

A vibrational paradigm of atomic dynamic in dense fluids is known to provide useful insight on the transport and thermodynamic properties of fluids in three dimensions. In this paper, a vibrational model is generalized to describe the excess entropy of two-dimensional (2D) fluids. A simple practical implementation of this model is demonstrated to deliver accurate results for various systems, such as one-component plasmas with Coulomb and logarithmic interactions, a 2D fluid of dipole particles, and a 2D Yukawa fluid. The applicability limits, relevance to three-dimensional fluids, relations to other 2D phenomena, and potential practical applications are briefly discussed.

2026-06-03T07:17:37Z 11 pages, 7 figures Physical Review E 113, 014104 (2026) Sergey Khrapak 10.1103/14db-xhrv http://arxiv.org/abs/2511.20075v4 2026-06-03T07:08:20Z

The pinch-off of bubbles in viscoelastic liquids is a fundamental process that has received little attention compared to viscoelastic drop pinch-off. While these processes exhibit qualitative similarities, the dynamics of the pinch-off process are significantly different. When a drop of a dilute polymer solution pinches off, a thread is known to develop that prevents breakup due the diverging polymer stresses. Conversely, our experiments reveal that this thread is absent for bubble pinch-off in dilute polymer solutions. We show that a thread becomes apparent only for high polymer concentrations, where the pinch-off dynamics become very sensitive to the size of the needle from which the bubble detaches. The experiments are complemented by numerical simulations and analytical modeling using the Oldroyd-B model, which capture the dilute regime. The model shows that polymer stresses are still singular during bubble pinch-off, but the divergence is much weaker as compared to drop pinch-off. This explains why, in contrast to droplets, viscoelastic bubble-threads do not appear for dilute suspensions but require large polymer concentrations

2025-11-25T08:47:20Z 15 pages, 14 figures, submitted to Physical Review Fluids Coen I. Verschuur Physics of fluids department, University of Twente, Enschede, The Netherlands Alexandros T. Oratis Physics of fluids department, University of Twente, Enschede, The Netherlands Vatsal Sanjay Physics of fluids department, University of Twente, Enschede, The Netherlands Jacco H. Snoeijer Physics of fluids department, University of Twente, Enschede, The Netherlands http://arxiv.org/abs/2604.23850v2 2026-06-03T01:46:49Z

Additives of sparingly soluble components are known to slow down or completely inhibit Ostwald ripening in dispersed systems. In this paper, our earlier model of stabilization against Ostwald ripening is revisited and extended. In a quasi-steady-state mode, the process is shown to be controlled by the diffusion of the less soluble component, and the whole machinery of the classical Lifshits-Slezov-Wagner (LSW) theory can be leveraged almost without any change. The particle size distribution is predicted to follow the same distribution function pattern as in the classic LSW theory. The rate of ripening follows the classic cubic law. To extend our earlier result, an improved extrapolatory equation for the ripening rate is derived, that covers the whole formulation range, accounts for the difference in molar volumes of the components and for the solution non-ideality. The behavior described above is observed over the range of high concentrations of the poorly soluble component, with the cutoff determined by the lock-in number described in the previous paper of this series. When the concentration of the additive is low, the kinetics no longer follows the LSW pattern; instead, the particle size distribution becomes bimodal, with the fraction of 'fines' enriched by the poorly soluble component and the fraction of the large particles to ripen as if no additive were present. The lock-in parameter L1 can be used to characterize for the transition from one mode to another. In the end, some practical stabilization approaches for emulsions are discussed.

2026-04-26T19:39:59Z As accepted in Open Transport in January 2026 Alexey Kabalnov http://arxiv.org/abs/2606.04331v1 2026-06-03T01:15:09Z

The van der Waals interaction has been extensively studied for colloidal forces and resultant emergent phenomena such as colloidal stability, aggregation, and suspension rheology, but the effect of electrolytes on this interaction, especially at intermediate and high electrolyte concentrations, remains incompletely understood. We have extended the Lifshitz theory for van der Waals interactions in pure water to alkali nitrate solutions at arbitrary concentrations by developing a dielectric response model for alkali nitrate solutions that is based on electronic structure calculations of the molecular constituents. Due to their importance in catalysis, ceramics, and coating technologies, the Hamaker constants for rutile, boehmite, and alumina nanoparticles suspended in alkali nitrate solutions are calculated as a function of salt concentration. Contrary to prevailing assumptions, increasing the concentration of sodium (Na), potassium (K), and rubidium (Rb) nitrate solutions causes appreciable increases of the Hamaker constants relative to pure water instead of decreases, whereas cesium nitrate (CsNO3) has almost no effect on the Hamaker constant. We discussed the influence of the solution molar volume, the polarizability of the dissolved ions, and optical properties of the interacting particles in the context of previously published work. Our study indicates a non-vanishing role of van der Waals interactions on colloidal stability at intermediate and high electrolyte concentrations, leading to physical insights on emergent phenomena associated with nanoparticles.

2026-06-03T01:15:09Z Micah P. Prange Jaehun Chun Gregory K. Schenter Elias Nakouzi Yihui Wei Aurora E. Clark Kevin M. Rosso Carolyn I. Pearce http://arxiv.org/abs/2606.04256v1 2026-06-02T22:10:29Z

Cellular morphogenesis, the process by which biological tissues acquire shape and structure, remains a fundamental challenge in understanding pattern formation and the coordinated remodeling of cellular assemblies. Under appropriate conditions, cytoskeletal filaments can organize into a nematic phase exhibiting partial orientational order. Topological defects within this nematic organization generate localized mechanical stresses that destabilize the tissue and promote deformation and structural rearrangements to relieve internal stresses. We develop a continuum framework that models living tissues as active biological networks represented as nematic polymer networks capable of heterogeneous growth and remodeling. The model captures macroscopic effects through spatial variations in the fiber order parameter which drives the system away from equilibrium. Morphogenesis is described as a sequence of quasi-static equilibrium states governed by the coupling between nematic order, elasticity, stress-driven growth, and adaptive relaxation. Finite element simulations illustrate Hydra regeneration and development when topological defects are prescribed according to the mature organism's expected morphology. The results show that defect topology controls stress localization and shape evolution: $+1$ defects drive protrusion formation, while $-1/2$ defects act as structural stabilizers with minimal growth. By varying the initial defect configuration, we model diverse morphogenetic outcomes, including uniaxial regeneration, tentacle formation, and biaxial development.

2026-06-02T22:10:29Z Silvia Paparini Giulio G. Giusteri L. Angela Mihai http://arxiv.org/abs/2606.07652v1 2026-06-02T20:59:27Z

Most high-performance elastic textiles rely on yarns composed of chemically dissimilar polymers, rendering them difficult to recycle. Here, we demonstrate fully thermo-mechanically recyclable stretchable yarns composed of polyethylene (PE) family materials. Inspired by structure-property relationships in natural materials, we engineer a library of melt-spun PE fibers spanning mechanical properties from elastomeric to functional by tuning polymer crystallinity and chain orientation. These fibers are assembled into core-sheath yarns comprising an olefin block copolymer elastic core and a high-strength PE sheath, forming a helical architecture. The resulting yarns exceed mechanical performance of commercial PET-spandex yarns while maintaining full recyclability. We further show that PE homopolymers and copolymers can be jointly melt-processed and recycled without phase separation or loss of performance. This approach enables stretchable recyclable textiles from fibers with previously demonstrated cooling, moisture-wicking and stain-resisting performance and provides a scalable pathway toward circular garments compatible with existing polyethylene recycling streams.

2026-06-02T20:59:27Z SeongHyeon Kim Duo Xu Volodymyr Korolovych Domingo R. Flores-Hernandez Kaniz Moriam Daniel J. Braconnier Svetlana V. Boriskina http://arxiv.org/abs/2605.26083v2 2026-06-02T20:49:44Z

Colloidal gels assembled from nanoparticles (NPs) are a versatile class of soft network-based materials capable of rich dynamic, mechanical, and even optical or magnetic responses to stimuli. Understanding how their hierarchically organized processes relate to macroscopic network properties remains a broad and unresolved problem in soft matter physics. The mechanisms of gel formation can depend sensitively on the pathway and the nature of NP interactions, thus far preventing a unified theoretical bridge between nanoscopic interactions and structural evolution and network dynamics. Indirect measurement of dynamics using light-scattering techniques provides an experimental means to quantify underlying particle and network motion. X-ray photon correlation spectroscopy (XPCS) has emerged as a powerful tool for probing nanoscopic motion in nanoparticle gels, but alone cannot resolve the full spatiotemporal spectrum of dynamics that drive gelation, aging, and network mechanical properties. While in situ rheo-XPCS enables simultaneous probing of nanoscale and bulk mechanical responses, complementary light scattering, microscopy, or simulations can extend spatiotemporal characterization and, consequently, understanding of NP gel network physics. Implementing a modular model platform with tunable primary nanoparticle features allows systematic variation of nanoscopic characteristics that drive emergent gel responses and inform the development of theoretical models for a wide range of soft, dynamic, nanostructured materials. The rapid expansion of XPCS capabilities at fourth-generation light sources, combined with complementary tools and robust model systems, positions the field to move beyond descriptive fundamental studies toward the design of nanoparticle gels with adaptive and programmable behaviors.

2026-05-25T17:47:52Z 77 pages, 7 figures, Perspective for Physical Review E (accepted for publication) William D. Brackett Zachary M. Sherman Felix Lehmkühler Thomas M. Truskett Delia J. Milliron 10.1103/xn5z-cwjz http://arxiv.org/abs/2606.04138v1 2026-06-02T18:52:14Z

The coordinated interactions between organisms enhance collective functionality, a feature that artificial systems such as enzymatic nanomotors seek to replicate. A key objective, yet still a major challenge, is to achieve chemical communication among nanomotors. Progress has been limited by the difficulties in verifying effective signaling processes, including chemical signal propagation and the response of receiving nanomotors. Here, we address this challenge using an enzymatic nanomotor system that demonstrates communication between two populations through generically non-reciprocal phoretic response. A primary swarm of glucose-responsive nanomotors migrates toward a glucose gradient while producing H2O2 as a diffusible communication signal. This self-generated chemical gradient then acts as a chemoattractant for a secondary swarm of catalase-powered nanomotors. Through carefully designed experiments, we visualize the propagating H2O2 gradient and quantify the spatiotemporal response of the receiver nanomotors to the chemical front. Combined experimental and theoretical analysis has revealed that the synergy between different combinations of chemo-attractive and chemo-repulsive mobilities and catalytic rates of consumption and production of substrates and products gives rise to a wealth of different collective responses in the system. This work represents a step toward programmable synthetic systems at the collective level, broadening the functionality of chemical nanomotors and opening opportunities for future hybrid living-synthetic systems.

2026-06-02T18:52:14Z Shuqin Chen Giorgio Lovato Oriol Jutglar Soler Daniel Sánchez-deAlcázar Ramin Golestanian Samuel Sánchez http://arxiv.org/abs/2606.03952v1 2026-06-02T17:40:22Z

Random packings of disordered rigid rods exhibit emergent cohesion, as exemplified in a nest of twigs that is self-equilibrated, free-standing structures. We analyze the geometric motif underlying this cohesion using a rod packing that maximizes the average crossing number subject to non-penetration constraints. We show that this protocol leads to self-caging: collective geometric constraints that prevent rod escape even in finite systems with free boundaries, leading to packings that remain mechanically cohesive due to a combination of purely repulsive and frictional interactions. We show that self-caging is controlled by the available free-volume in translational and rotational configuration spaces, which is minimal when $N/(Zα)=1/3$ where $N$ is the number of rods, $α$ is the aspect ratio, and $Z$ is the average coordination number. Our results establish a minimal geometric motif for entanglement-induced cohesion in athermal rod packings, with implications for cohesive granular matter without attractive forces.

2026-06-02T17:40:22Z Yeonsu Jung L. Mahadevan http://arxiv.org/abs/2606.03894v1 2026-06-02T16:53:15Z

The axial dispersion of polymers in microchannels depends on an interplay between microchannel geometry, polymer architecture, and hydrodynamics. Here, we investigate the axial dispersion of linear, comb, and star polymers in parallel-plate and sinusoidal expansion-contraction microchannels at dilute concentrations using multiparticle collision dynamics simulations. The polymers all contain the same number of monomers but differ in their architecture, and their concentration is fixed at either one value that is dilute for all polymers or the same value relative to the overlap concentration for each polymer. The dispersion coefficients measured at a nominal solvent volumetric flow rate are found to depend on both architecture and concentration. We show that the dispersion coefficients collapse as a function of the Péclet number after accounting for confinement effects on the polymer diffusion coefficient and polymer contributions to the flow field, and the dispersion coefficients in the parallel-plate microchannel can be reasonably predicted using a theory that accounts for inhomogeneous distribution of the polymers in the microchannel.

2026-06-02T16:53:15Z C. Levi Petix Tzortzis Koulaxizis Griffin D. Overton Antonia Statt Michael P. Howard