Dicovering the emergent nonlinear dynamics of acoustically levitated cube clusters

2026-03-16T20:38:27Z

The complex behavior of many natural and engineered systems emerges from the interaction of a small number of effective degrees of freedom. Discovering the physical basis of the interactions between these degrees of freedom directly from experimental observations has been a longstanding challenge, particularly with respect to predicting the long-time dynamics of dynamical systems with unknown equations of motion. Here, we introduce a data-driven approach that is able to produce a generative model for the long-time dynamical behavior of systems with a weakly attracting manifold. We apply this method to an experimental dynamical system with two degrees of freedom: acoustically levitated pairs of cube-shaped particles, which cluster by sharing a single edge. In the acoustic trap, the center-of-mass of the cube cluster oscillates vertically about the levitation plane, while also oscillating about their flexible hinge-like connection. Depending on their initial condition, the hinge dynamics evolve about three distinct nonlinear dynamical attractors persisting for hundreds of cycles. In order to capture the underlying physics, we develop a numerical fitting procedure and extract a minimal nonlinear dynamical model that captures both the long-time dynamics of the cluster as well as the convergence onto the dynamical steady state. This dynamical model uncovers the nonlinear, non-reciprocal coupling between the center-of-mass motion and the hinge degree of freedom that stabilizes the dynamical attractors, which we subsequently confirm by independent finite-element methods. Our results demonstrate a novel data-driven method for the discovery of nonlinear models with long-timescale stable predictions.

Biomedical active matter: Emergence and breakdown of collective functionalities

2026-03-16T18:10:01Z

Living systems are made of active materials with microscopic components that work together to perform macroscopic biological tasks. The breakdown of these collective functionalities leads to diseases, which, conversely, could be treated by exploiting self-organization in healthcare technologies. Here, we review recent advances in this rapidly growing field of biomedical active matter. The main themes are (1) collective self-assembly and spatiotemporal coordination; (2) collective motion, transport, and navigation; (3) collective sensing, signaling, and communication; and (4) collective adaptation, evolution, and learning. We discuss these emerging processes in a wide range of systems, including protein folding, biomolecular condensates, cytoskeleton dynamics, intracellular flows, bacterial biofilms, quorum sensing, cilia synchronization, wound healing, biolocomotion, neurons, endocrine signalling, and cardiovascular flow networks. For each, we highlight medical conditions associated with reduced collective functionality and how they may be treated using microrobotic swarms, bioinspired metamaterials, diagnostics, lab-on-chip devices, organoids, and other active and adaptive matter innovations.

Nonequilibrium energetics of sensing and actuation by a smart active particle

2026-03-16T17:54:15Z

Smart active agents must allocate finite energetic resources across distinct functions, yet the underlying thermodynamic trade-offs remain poorly understood. Here, we introduce a minimal model of a self-steering particle with an internal polarity-cue sensor coupled to an external environmental field, decomposing its steady-state entropy production rate into locomotion, actuation, and sensing costs. This separation exposes an energetic bookkeeping structure underlying even the simplest form of embodied navigation. The emergence of Pareto fronts linking energetic expenditure to localisation precision and path-following performance shows that feedback-controlled active motion is constrained by quantitative thermodynamic bounds that persist across distinct task geometries.

Topological localisation and motility of active knots

2026-03-16T17:49:15Z

Nonequilibrium active polymers provide a minimal framework to investigate biopolymers such as DNA and chromatin under the action of molecular motors. Here we study active ring polymers with controlled topology and show that knot type qualitatively determines their nonequilibrium behaviour. We find that activity induces opposite localisation responses in different topological families: torus knots systematically delocalise and inflate, whereas twist knots tighten and remain localised. We trace this divergent behaviour to the distinct symmetry properties of their tangent fields, which control the alignment of active forces along the chain. We show that topology also governs internal and emergent dynamics. Active torus knots behave as soft chiral self-propelled particles exhibiting persistent motion with a well-defined handedness fixed by their topological chirality. In contrast, achiral knots show no net handedness. The knot thus acts as a deformable topological quasiparticle whose morphology and propulsion are selected by topology. These results suggest potential routes toward programmable soft chiral particles with controllable morphology and emergent motility modes.

On modeling fracture of soft polymers

2026-03-16T16:59:20Z

Soft polymers are ubiquitous materials in nature and as engineering materials with properties varying from rate-independent to rate-dependent. Current fracture toughness measures are non-unique for rate-dependent soft materials for varying loading profiles and specimen geometries. Works on modeling fracture in rate-dependent soft polymers are limited to specific pre-cracked geometries. There is no generally agreed-upon model for the fracture of soft polymers. We propose and show that a critical value of stress work can be used as a measure of fracture resistance for a certain class of soft polymers. We develop a damage model to predict fracture in soft polymers. In the model, the energetic part of the critical stress work is proposed as a damage initiation criterion that has the ability to capture failure surfaces. The damage growth is modeled through a generalized gradient-damage framework. The fracture model is validated for both elastomers and viscous soft polymers by comparing model predictions against experimental results for different materials (ethylene propylene diene monomer - EPDM, EPS25 vitrimer, styrene butadiene rubber - SBR, natural rubber - NR, and polyborosiloxane - PBS), a variety of specimen geometries, and loading conditions. The model can predict key physical phenomena such as brittle and ductile responses and different fracture profiles. The microstructural quantities, such as subchain dissociation energy during the fracture of polymers, can be predicted from the macroscopic model parameters.

Glass and jamming transitions in a random organization model

2026-03-16T16:46:27Z

We study a two-dimensional, off-lattice particle model introduced to describe absorbing phase transitions in driven non-Brownian suspensions. We numerically explore the $(φ,ε)$ phase diagram, where $φ$ is the packing fraction and $ε$ controls the amplitude of particle jumps. We use a binary mixture to suppress crystallization, which allows us to disentangle the model's distinct phase transitions between amorphous states. At large $φ$, we find that the approach to the absorbing transition is preceded by a non-equilibrium glass transition to a non-diffusive amorphous state. This dynamic arrest makes the location of the critical absorbing transitions protocol-dependent. The $ε\to 0$ end-point of the transition line defines a jamming transition whose location is shown to vary continuously with the preparation protocol, and cannot serve as a unique definition of random close packing. Near jamming, we observe a complex landscape and marginal stability, reminiscent of Gardner phases found in thermal glasses. The critical exponents characterizing packings at the jamming transition numerically agree with alternative approaches based on energy minimization, and with analytic predictions from mean-field replica theory. We analyze hyperuniformity in fluid and glass phases, where it emerges with qualitatively distinct signatures, and show that random organization dynamics does not determine the hyperuniformity observed in jammed packings, which is found to be non-universal. Our results show that random organization models share deep physical similarities with thermal soft-particle systems undergoing glass and jamming transitions, with little impact of the non-equilibrium nature of the microscopic dynamics on emerging physical properties.

Emergent Elasticity and Quasiconformal Flow in Active Solids

2026-03-16T16:20:57Z

A constitutive relation between stress and strain relative to a reference state is the basic assumption of elasticity theory. However, in living matter, force generation is governed by motor molecule activity, which does not depend on deformation relative to a reference. A different approach is needed to describe how cells sculpt tissues through local active forces. We develop a theory of two-dimensional continuum mechanics where the active stress configuration, rather than a reference shape, is the fundamental input. Motivated by the Active Tension Network model for epithelia, we encode motor-driven forces between cells in a Riemannian tension metric. We derive a stress-metric relation for the macroscopic stress that results from embedding the tension manifold into physical space (defining cell positions). Despite the absence of constitutive laws, a stress-free reference state and an effective stress-strain relation arise from the tension metric, making the system an effectively elastic active solid. Moving from statics to dynamics, our framework describes how an active solid can morph its shape through adiabatic dynamics of active stress. To capture large, plastic deformations through cell rearrangement, we introduce a second metric that geometrizes the cell network topology. Topological rearrangement appears as a continuous reparametrization of the tension manifold. This mathematical framework, based on Riemannian geometry, isothermal coordinates, and quasi-conformal flows, quantitatively predicts how local contractile activity determines large-scale shape and provides a principled continuum description of active plasticity. A companion paper validates the continuum analysis through coarse-graining of discrete cell networks. Our theory identifies a geometric origin of emergent elasticity and plasticity in living matter and, more broadly, in active and granular materials.

Disorder to Order Transition in 1D non-reciprocal Cahn-Hilliard Model

2026-03-16T14:33:48Z

We present the phenomenology of the one dimensional non-reciprocal Cahn Hilliard model for varying non-reciprocity $(α)$ and different boundary conditions. At small $α$, a perturbed uniform state evolves to a defect laden configuration that lacks global polar order. Defects are the sources and sinks of travelling waves. For a given $α$, defects with a unique wave number that increases monotonically with $α$ are selected. A critical threshold $α_c$ marks the onset of a transition to states with finite global polar order. For periodic boundary conditions, above $α_c$, the system shows travelling waves that are completely ordered. In contrast, travelling waves are incompatible with the Neumann and Dirichlet boundary conditions. Instead, for $α\gtrsim α_c$, we find fluctuating domains that show intermittent polar order and at large $α$, the system partitions into two domains with opposite polar order.

Will it form a glass? Tackling glass formation using binary classification

2026-03-16T14:07:39Z

Glass formation is one of the most important and fundamental open problems in glass science. Predicting whether a liquid can be easily frozen into a glass appears simple but is far from it. In this communication, we address glass formation in inorganic nonmetallic liquids using binary classification to predict the probability that a given liquid will form a glass under typical laboratory conditions. Using a dataset of more than 50,000 examples, we trained random forest classifiers that achieved ROC-AUC values around 0.89 and PR-AUC close to 0.95 on the holdout dataset (i.e., unseen data). A rigorous model selection routine was employed, including hyperparameter tuning with cross-validation, and four different data treatment routes were evaluated. Using SHAP values, we extracted valuable insights from the trained models that both agree with established knowledge and extend it. For example, we identified that the bandgap energy of the constituent chemical elements is positively correlated with glass formation. When glass stability parameters and Jezica were added to the dataset, no performance improvement was observed, but model complexity decreased significantly. This result is particularly relevant for composition screening, especially in inverse design problems.

A mechanical bifurcation constrains the evolution of cell sheet folding in the family Volvocaceae

2026-03-16T12:06:38Z

The processes of morphogenesis that give rise to the shapes of organs and organisms during development are often driven by mechanical instabilities. Can such mechanical bifurcations also drive or constrain the evolution of these processes in the first place? We discover an instance of these constraints in the green algae of the family Volvocaceae. During their development, their bowl-shaped embryonic cell sheet turns itself inside out. This inversion is driven by a simple wave of cell wedging in the genus Pleodorina (16-128 cells) and more complex programmes of cell shape changes in Volvox (~400-50000 cells). However, no species with intermediate cell numbers (256 cells) have been described. Here, we relate this gap to a mechanical bifurcation: Focusing on the inversion of Pleodorina californica (64 cells), we develop a continuum model, in which the cell shape changes driving inversion appear as changes of the intrinsic curvature of an elastic surface. A mechanical bifurcation in this model predicts that inversion is only possible in a subset of its parameter space. Strikingly, parameters estimated for P. californica fall into this possible subset, but those that we extrapolate to 256 or more cells using allometric observations and a model of cell cleavage in Volvocaceae do not. Our work thus suggests that the more complex inversion strategies of Volvox are an evolutionary necessity to obviate this bifurcation and indicates more broadly how mechanical bifurcations can drive the evolution of morphogenesis.

Cracking donuts and sorting lipids: geometry controls archaeal membrane stability and lipid organization

2026-03-16T12:06:00Z

Cells are defined by lipid membranes that differ in their structure across the tree of life. While the membranes of most bacteria and eukaryotes consist of single-headed bilayer lipids, the membranes of archaea are composed of mixtures of single-headed bilayer lipids and double-headed bolalipids. Archaeal bolalipids can adopt straight or u-shaped conformations, enabling them - together with bilayer lipids - to control whether membranes form bilayer or monolayer structures. Yet, the physical principles governing archaeal membranes remain largely unexplored, especially how membrane structure couples to externally imposed curvature during membrane remodeling. Here, we perform coarse-grained molecular dynamics simulations of toroidal vesicles to systematically probe the effects of all relevant combinations of mean and Gaussian curvatures on shape stability and lipid organization. We find that soft bilayer membranes can sustain all curvatures induced, whereas rigid bolalipid monolayer membranes either transition to different vesicle shapes or rupture. Bilayer-mimicking u-shaped bolalipids and bilayer lipids are spatially accumulated in regions of high mean membrane curvature independent of Gaussian curvature. Our work identifies curvature-composition coupling as a physical signature of archaeal membrane remodeling.

Polarization Plasticity of Ferroelectric Nematics: a case of Electrostatic Frustration in Simple Planar Electrode Cells

2026-03-16T09:17:46Z

Because of their spontaneous bulk polarization, ferroelectric nematic liquid crystals can be easily brought by surface coupling or confinement in a state in which the accumulation of bound charges becomes incompatible with polar order, creating frustration. This condition also occurs in the simplest cells with parallel uncoated metal electrodes where we find that the polarization charge accumulating on the electrodes is proportional to the applied voltage for $ΔV< V_{sat}$, a threshold value independent of cell thickness. We show that below $V_{sat}$, frustration drives the system into a regime of polarization plasticity, in which nematic ordering is preserved and the nematic director remains perpendicular to the electrodes, while instead the polarization is reduced to cancel the internal electric field. In this regime, the kinetics of bound charge reversal becomes independent from $ΔV$. The observations are consistent with a model in which the system splits into antipolar tubular domains of mesoscale diameter extending from electrode to electrode, in which the polarization retains its unconstrained equilibrium value, separated by pure polarization-reversal walls.

Cage Breaking Far from Equilibrium

2026-03-16T08:35:54Z

Active matter can flow and yield under conditions where passive matter jams and slows down, as self-propulsion significantly modulates particle escape from local cages. How activity microscopically reshapes the caging environment to produce this effect, however, remains poorly understood. Here we study a minimal active-matter model of cage breaking: three distinguishable self-propelling disks under circular confinement. This simple setting allows us to construct an entropic landscape for rearrangements and to compare it exactly with its equilibrium counterpart. At low activity the landscape is effectively bistable, whereas at high activity it develops additional metastable basins associated with frustrated clusters at the boundary. We quantify the system's departure from equilibrium and show that cage breaking is fastest when the persistence length matches the particle radius, linking a geometric microscopic scale to the enhanced dynamics of active glasses. Extending the landscape to two dimensions reveals circulating probability currents, and a Markov-state description shows that detailed balance is broken both in the continuous landscape dynamics and in the coarse-grained transitions between entropic basins. Our results provide a minimal microscopic framework for understanding how activity reshapes caging, relaxation, and irreversibility in dense nonequilibrium matter.

Strain-rate, temperature and size effects on the mechanical behavior of fiber bundles

2026-03-16T07:51:24Z

The mechanical characteristics of fibers (of various materials), as well as of fiber bundles, are of primary importance for the design and the mechanical behavior of textiles, or of fibrous and composite materials. These characteristics are classically determined from strain-rate controlled tensile testing, generally assuming a negligible role of thermal activation on damage and fracturing processes. Under this assumption, the distribution of individual fiber strengths can be deduced from a downscaling of the macroscopic mechanical behavior at the bundle scale. There are however many experimental evidences of strain-rate and temperature effects on the mechanical behavior of individual fibers or bundles, which can also creep under constant applied load. This indicates a strong role of thermal activation on these processes. Here, these effects are analyzed from a fiber-bundle model with equal-load-sharing, in which thermal activation of fiber breakings is introduced from a kinetic Monte-Carlo algorithm adapted for time-varying stresses. This allows to rationalize these rate or temperature effects, such as a decrease of bundle strength, strain at peak stress, and apparent Young's modulus with decreasing strain-rate and/or increasing temperature. This also shows that the classical downscaling procedure used to estimate the distribution of individual fiber strengths from the mechanical behavior at the bundle scale should be considered with caution. If mechanical testing of the bundle is performed under conditions favoring the role of thermal activation (e.g. low applied strain-rate), this procedure can strongly underestimate the intrinsic (athermal) Weibull's parameters of the fiber strengths distribution. The same model is used as well to explore size (number of fibers) effects on bundle mechanical response.

Polydisperse polymer networks with irregular topologies I: Mechanics of cross-link distributions

2026-03-16T04:37:14Z

The structure of polymer networks, defined by chain lengths and connectivity patterns, fundamentally influences their bulk properties. While existing polymer network models connect chain properties to emergent network behavior, they are often limited to monodisperse networks with regular connectivities. In this work, we introduce a novel modeling framework that shifts the focus from individual polymer chains to cross-links and their connected chains as the fundamental unit of analysis. The key features of this framework are the relaxation of the cross-link junction position to satisfy local force balance, and physically intuitive means for satisfying material frame indifference. We explore two distinct limiting behaviors for the orientation of the frame of a cross-link: (1) the free rotation limit, which assumes the cross-link rotates to minimize free energy, and (2) the frame averaging limit, which incorporates structural heterogeneity by averaging over all possible cross-link orientations. It is found that an increase in variance in monomer numbers generally leads to network softening, while in bimodal networks, the onset of strain stiffening is controlled by shorter chains and the stiffening response is modulated by the ratio of short to long chains. By deriving closed-form approximations for both limits valid in the regimes of small deformation or small polydispersity, we offer an efficient computational approach to modeling the mechanics of complex, polydisperse networks. An aim of this framework is to take a step toward the rational modeling and design of heterogeneous polymer networks with structures tailored for specific properties.