https://arxiv.org/api/UbFz98LnJXWo/RltDkBrGg9gMVI 2026-06-10T04:27:18Z 45264 45 15 http://arxiv.org/abs/2606.07823v1 2026-06-05T20:18:44Z

We investigate motility-induced phase separation in a lattice gas of self-propelled particles with hard-core exclusion, where an internal director biases particle hopping along the lattice coordination directions while undergoing rotational diffusion, together with a thermal-like translational diffusion. Rather than employing stochastic simulations, we adopt a master-equation formalism within a general mean-field approximation. By linearizing the mean-field master equation around the homogeneous stationary state and applying Bloch's theorem, the stability analysis is reduced to a $z$-dimensional tight-binding eigenvalue problem. A perturbation expansion in the wavenumber near $\vk = 0$ then yields the spinodal surface in closed analytical form for six Bravais lattices: linear, square, hexagonal, simple cubic, body-centered cubic, and face-centered cubic. The influence of lattice geometry is shown to enter exclusively through a single coefficient $\mathcal{A}$ which we evaluate exactly for each case. We further show that translational diffusion smooths the interface between the dense and dilute phases. Finally, we determine the rotational probability currents associated with the inhomogeneous stationary states, a distinctive signature of the broken detailed balance underlying active-system dynamics.

2026-06-05T20:18:44Z Felipe Hawthorne Cristiano F. Woellner José A. Freire http://arxiv.org/abs/2605.13244v2 2026-06-05T18:27:30Z

The size-dependent liquid-vapor surface tension controls phase change, wetting, and transport at nanoscales, yet its first curvature correction, the Tolman length, remains difficult to determine. We develop a thermodynamic and statistical-mechanical framework that relates this correction to bulk response properties of a one-component liquid near liquid-vapor coexistence. For curved interfaces, the analysis considers two local formulations of the same capillary-chemical balance, in excess pressures and in relative density deviations. For weakly compressible liquids in the regime emphasized here, the adopted asymmetric density-based formulation is the practically relevant one, with finite-curvature effects entering through vapor supersaturation under capillary equilibrium. At coexistence, the planar-limit value of the same Tolman length reduces to a combination of the liquid isothermal compressibility and its pressure derivative and can be recast as a bulk fluctuation-response observable of the homogeneous liquid in the isothermal-isobaric ensemble. In this representation, the planar-limit coefficient is determined by second and third central moments of the volume distribution, equivalently by the pressure response of the relative fluctuation width. For water, homogeneous (N,P,T) simulations of SPC/E and TIP4P/2005 sample the bulk liquid, not an explicit liquid-vapor interface, and yield estimates near -0.7 Angstrom at 300 K. An independent evaluation based on the IAPWS-IF97 industrial formulation gives -0.713 +/- 0.004 Angstrom at the same coexistence state and predicts a weakly nonmonotonic temperature dependence along coexistence. Beyond water, the framework applies to other one-component liquids in regimes where an accurate thermal equation of state or sufficiently converged bulk volume statistics are available.

2026-05-13T09:30:06Z 28 pages, 6 figures, 2 tables; accepted manuscript; revised author-prepared figures, results unchanged Sergii Burian Yevhenii Shportun Liudmyla Klochko Leonid Bulavin Dmytro Gavryushenko Mykola Isaiev 10.1063/5.0336709 http://arxiv.org/abs/2510.15771v3 2026-06-05T17:49:06Z

Cohesive active assemblies are often regulated by spatially heterogeneous nonequilibrium driving, such as gradients in motility, biochemical turnover, or mechanical activity. Such heterogeneous driving can influence where condensates or cell collectives accumulate, how stable they are, and how they exchange material with their surroundings. However, the minimal physical mechanisms by which activity gradients control the positioning and turnover of cohesive active matter remain unclear. Here, we address this question using a model of attractive active Brownian particles (ABPs) in a spatially varying activity field. Using Brownian dynamics simulations, we show that these particles undergo liquid-gas phase separation, and spatially varying activity fields induce striking emergent dynamics. Attractive active droplets migrate up activity gradients, and at sufficiently high activity, they can fragment or evaporate into a dilute phase. For finite clusters, evaporated ABPs can redistribute through the simulation box, reassemble into new clusters in lower-activity regions, and migrate again toward higher activity, giving rise to cyclic positioning through repeated nucleation, migration, evaporation, and reassembly.

2025-10-17T15:59:41Z Hossein Vahid Jens-Uwe Sommer Abhinav Sharma http://arxiv.org/abs/2605.26458v2 2026-06-05T16:46:10Z

Harnessing active matter calls for strategies that break the directional symmetry of self-propelled motion without altering the propulsion mechanism itself. Here, we show that magnetically inert spherical active colloids can be steered through the anisotropic viscous response of a ferrofluid under a uniform magnetic field. Self-propelled Janus colloids exhibit robust cross-field motion transverse to the magnetic field, although the applied magnetic field directly controls neither the particles nor their propulsion speed. Quantitative measurements reveal an emergent reorientation torque that grows with both propulsion speed and magnetic field strength. A squirmer model in a magnetoviscous medium captures these observations and shows that the torque arises from the coupling between swimmer-generated flow and anisotropic rotational viscosity. Our findings establish a hydrodynamic basis for converting viscous dissipation into directional symmetry breaking through anisotropic rheology, providing a route to field-controlled material transport by active matter.

2026-05-26T02:12:52Z 19 pages, 5 figures, supplemental material Ziyang Zhou Takuya Kobayashi Keita Saito Masato Ito Kohei Yoshinaga Yasutaka Iwashita Kazusa Beppu Yusuke T. Maeda http://arxiv.org/abs/2606.07438v1 2026-06-05T16:37:53Z

We investigate, through numerical simulations, the rheology of a dry suspension of deformable droplets under pressure-driven flow. The system exhibits two force-driven dynamical transitions. At low forcing, the suspension behaves as a yield-stress material: below a critical force, droplets remain arrested in an amorphous solid-like state. Our simulations suggest that yielding is controlled by droplet contacts and predict that the critical force strongly depends on deformability. Above yielding, the suspension does not flow steadily but rather enters an intermittent, stick-slip regime characterised by long-lived caging and non-Gaussian velocity fluctuations. This state can be interpreted as a "self-pinned'' glass, in which slowly evolving droplet overlaps generate an effective rugged energy landscape that dynamically traps droplets and produces intermittent rearrangements reminiscent of near-critical dynamics in depinning models. At larger forcing, droplets deform sufficiently to continuously exchange neighbours, progressively annealing the overlap structure and driving a dynamic transition to a string-like, flowing state. Our results identify the restructuring of overlap networks as a generic mechanism which controls flow in driven suspensions of deformable particles.

2026-06-05T16:37:53Z Achille Quarante Michael Chiang Davide Marenduzzo Giuseppe Negro http://arxiv.org/abs/2606.07384v1 2026-06-05T15:22:27Z

Hydrogels are versatile materials due to their softness and ability to undergo large changes in water content. Their mechanics, however, are complex, being a tight coupling between fluid flow and elastic deformations. We use experiments and theory to show that this coupling simplifies when hydrogels are not fully swollen. In this regime, polymer-water affinity controls local hydration, while the much weaker polymer network elasticity plays a secondary role, setting the resulting elastic shape. This observation enables a simplified model that accurately predicts stresses and deformations.

2026-06-05T15:22:27Z A. Chao Correas Y. Feng R. W. Style D. S. Kammer http://arxiv.org/abs/2606.07371v1 2026-06-05T15:13:50Z

Optically-responsive microgels offer a versatile platform for designing adaptive soft materials with coupled light and thermal responsiveness. Control over the crosslinking degree is particularly appealing as it can regulate not only particle size but also stiffness, thereby enabling remote tuning of key material functionalities. However, the internal structural changes that couple molecular photoresponsive mechanisms to mesoscopic properties remain poorly resolved. Here, we investigate different light-responsive microgels containing covalently incorporated coumarin moieties, which impart optical sensitivity through UV-induced cycloaddition, by combining dynamic light scattering, small-angle neutron scattering, and molecular dynamics simulations. We show that light irradiation alters not only particle size but also the internal polymer density distribution and subsequent thermal response. Before irradiation, the microgels exhibit a star-like architecture with a dense core and extended polymeric arms. After irradiation, the network evolves toward a markedly more compact structure. This transformation cannot be rationalized simply as an equivalent to an increase in crosslinking density during synthesis, as observed in the thermal response, revealing light as a powerful tool to regulate microgel architecture and multifunctional responsiveness.

2026-06-05T15:13:50Z Fabrizio Camerin Megha Emerse Gianpaolo Gallo Najet Mahmoudi Gregory Smith Emanuela Zaccarelli Lucio Isa Marco Laurati Jacopo Vialetto http://arxiv.org/abs/2606.07292v1 2026-06-05T14:03:05Z

We consider a generic case of neutrally wetting microswimmers in symmetric mixtures of two phase separating fluids, using hydrodynamic simulations. The swimmers spontaneously emulsify the two fluids into bicontinuous foam-like state. The two principal activity components: source dipole (self-propulsion) and force dipole (active mixing), create a twofold mechanism to stabilise the structures. When the self-propulsion is too strong, the swimmers cross the interfaces rapidly and the two fluids will phase separate. Below this threshold, the active stresses from the force dipoles, stabilise a dynamic and bicontinuous foam-like state. When the activity is turned off, the system relaxes into a kinetically trapped bicontinuous state, with particles permanently trapped at the interfaces. Our results provide a microscopic route to tunable active emulsions, with implications for bacterial suspensions and synthetic active matter.

2026-06-05T14:03:05Z 6 pages, 6 figures Harinadha Gidituri Sotiris Samatas Juho S. Lintuvuori http://arxiv.org/abs/2606.07133v1 2026-06-05T10:45:13Z

We investigate the adhesion dynamics of a thin elastic structure in contact with a viscous fluid and retracted at a controlled speed, mimicking natural adhesion mechanisms. During detachment, the viscous fluid confined between the deformable structure and a rigid substrate generates an adhesive force due to a pressure drop within the thin film. We show from dedicated experiments that the structural flexibility introduces a strongly nonlinear mechanical response, which significantly alters both the magnitude and the evolution of the adhesion force with retraction velocity. In contrast to rigid systems, the deformability of the structure enables enhanced and tunable adhesion. To capture this interplay, we develop a theoretical framework that couples elasticity and viscosity, providing new insights into how flexible structures enable adhesion control.

2026-06-05T10:45:13Z Mary Williams Thomas Desmedt Fabian Brau Pascal Damman http://arxiv.org/abs/2512.19714v2 2026-06-05T08:03:00Z

We develop an extended Onsager real-cavity framework to describe the Casimir--Polder interaction of small molecules dissolved in dielectric liquids near planar interfaces. By analytically resolving the geometry of the cavity opening, we derive closed-form expressions that capture the modification of the interaction as the molecule approaches a surface and connect smoothly to the asymptotic medium-assisted limit. Using experimentally established dielectric functions for water, propanol, and PTFE together with accurate molecular polarisabilities for O$_2$ and N$_2$, we compute the full distance-dependent potential for representative molecule--liquid--surface combinations. The results reveal how local-field screening, cavity geometry, and material response jointly determine both the magnitude and shape of the interaction, including the characteristic transition between open-cavity ($z\lesssim z_{\rm C}$) and closed-cavity ($z\gtrsim z_{\rm C}$) regimes. Beyond providing quantitative predictions, the framework offers an analytically transparent decomposition of dispersion forces in liquids, enabling a direct identification of the underlying physical contributions and an efficient exploration of parameter dependencies across different systems. The approach thus provides a useful baseline for interpreting dispersion interactions in complex environments within a continuum, local-field corrected description.

2025-12-15T10:43:05Z Johannes Fiedler Drew F. Parsons http://arxiv.org/abs/2606.07018v1 2026-06-05T08:00:41Z

In this paper we review some analytic results on the dynamics of the FPU system. In the first part of the paper, having in mind that the FPU Hamiltonian and the Toda Hamiltonian are close each other, we present some results on the action angle variables of the Toda system and deduce some stability properties for the dynamics of the FPU system. We first focus on the case of finitely many particles and then we study the limit $N\to\infty$. We present also some results on the continous limit of the Toda chain showing that it is well described by a couple of KdV equations. Then we study directly the dynamics of the function interpolating the FPU system and show that the dynamics is Hamiltonian and that the Hamiltonian is very close to a function of the first three Hamiltonians of the KdV hierarchy. In the second part of the paper we present some results valid in the thermodynamic limit, according to which the time autocorrelation functions of some suitably constructed observables decay slowly implying lower bounds on the thermalization times of the system.

2026-06-05T08:00:41Z 22 pages, no figure. Submitted to Journal of Statistical Physics Dario Bambusi Andrea Carati Alberto Maiocchi http://arxiv.org/abs/2312.08788v4 2026-06-05T03:04:49Z

Dense bacterial suspensions exhibit turbulent behaviour called ``bacterial turbulence''. The behavior of the bulk unconstrained bacterial turbulence is described well by the Toner-Tu-Swift-Hohenberg (TTSH) equation for the velocity field. However, it remains unclear how we should treat boundary conditions on bacterial turbulence in contact with some boundaries (e.g. solid walls). To be more specific, although the importance of the ``edge current'', the flow along the boundary, has been demonstrated in several experimental studies on confined bacterial suspensions, previous numerical studies based on the TTSH equation employ non-slip boundary conditions and do not seem to describe properly the behavior of bacteria near the boundaries. In this study, we impose a slip boundary condition on the TTSH equation to describe the bacterial motion at boundaries. We develop a method to implement the slip boundary condition. Using this method, we have successfully produced edge current and discovered that the direction of the edge current temporally oscillates. The oscillation can be attributable to the advection term in the TTSH equation. Our work demonstrates that boundary conditions could play an important role in the collective dynamics of active systems.

2023-12-14T10:13:53Z 18 pages, 23 figures Phys. Rev. E, 109:054604, May 2024 Hiroki Matsukiyo Jun-ichi Fukuda 10.1103/PhysRevE.109.054604 http://arxiv.org/abs/2411.16212v2 2026-06-05T02:34:36Z

A fluid, with broken time-reversal symmetry, would exhibit odd transport coefficients, such as odd viscosity, thermal conductivity and diffusion coefficient, which may fundamentally alter the fluid properties and significantly influence the structure and dynamics of immersed objects. Here, we develop an efficient coarse-grained simulation approach for the odd fluid, that captures all essential features of real odd fluids. Based on microscopic kinetic theory, we analytically derive the transport coefficients of the mesoscale odd fluid. Furthermore, we validate our approach by performing both simulations and theoretical calculations to explore the intricate transport phenomena of the odd fluid under various external drivings. Our work thus paves the way for studying anomalous transport in odd fluids and for large-scale simulations of odd complex fluids.

2024-11-25T09:20:54Z Phys. Rev. E, 113, 055102 (2026) Yuxing Jiao Mingcheng Yang 10.1103/gkct-3247 http://arxiv.org/abs/2508.04420v2 2026-06-05T01:52:07Z

Odd fluids are a class of fluids characterized by non-zero antisymmetric transport coefficient tensors induced by broken time-reversal symmetry. In our previous work, a mesoscale simulation model for two-dimensional isotropic odd fluids was developed. Here, we extend the model to the three-dimensional case that corresponds to an anisotropic odd fluid with cylindrical symmetry. Using kinetic theory, we analytically derive the viscosity tensor and Navier-Stokes equation for the three-dimensional mesoscale odd fluid, which are quantitatively verified by simulations. Furthermore, through both simulation and hydrodynamic theory, we demonstrate that the planar Poiseuille flow of the three-dimensional odd fluid exhibits exotic transport behavior. This work thus paves the way for performing large-scale simulations to explore and exploit intriguing phenomena of odd fluids.

2025-08-06T13:07:18Z Yuxing Jiao Mingcheng Yang http://arxiv.org/abs/2606.06710v1 2026-06-04T20:52:50Z

The cylindrical snap-fit is a ubiquitous fastening method that is both simple to manufacture and assemble, and yet secure. It consists of a partial cylindrical shell that `snaps' onto a cylindrical object. We build on previous work to describe the mechanics of the cylindrical snap-fit as a naturally curved thin elastic shell placed atop a rigid cylinder; we investigate the shell's behaviour when subject to a point force pushing it onto or pulling it off the cylinder. We classify the possible contact regimes according to whether the shell has a nonzero lifting capacity. We term situations with lifting capacity `grip-fits' and show that this includes both the snap-fit and a `stick-fit' regime, which allows lifting despite not having the characteristic `snap'. Regimes without lifting capacity are also characterized for completeness. We show that the different regimes may be characterized entirely by the shell/cylinder geometry and the coefficient of friction. We then consider different metrics for the lifting performance in the grip-fit regime. Our analysis reveals the trade-offs between assembly force, disassembly force, lifting force, and clamping force, providing design principles for secure lifting, easy detachment, and safe handling of fragile objects.

2026-06-04T20:52:50Z Grace K. Curtis Ian M. Griffiths Dominic Vella