https://arxiv.org/api/sxZ2SqcSgkQMayvjtSHf5gV1W1Q 2026-06-11T06:04:26Z 45276 390 15 http://arxiv.org/abs/2603.09801v2 2026-05-10T07:35:41Z

Yield-stress fluid flow through porous media is governed by a strong coupling between rheology and pore-scale geometry, leading to nonlinear, non-Darcy transport and pronounced channelisation near yielding. We develop a pore-network model for Herschel-Bulkley flow in two-dimensional disordered porous media, including optional wall slip. The network is closed by a physics-based pressure-flow relation for a converging-diverging throat, so that yielding and post-yield transport emerge directly from the pore-scale fluid mechanics without fitted resistance parameters. Benchmarking against direct numerical simulations shows that the model captures both the bulk pressure drop and the evolution of the flow topology from spatially distributed transport to strongly channelised flow. The framework also captures the leading effect of wall slip, which lowers the pressure gradient required for transport and reactivates pathways that remain blocked in the no-slip case. Using the model across different porous geometries, we show that near-yield pressure losses are governed by constriction statistics rather than by an obstacle-scale length. In particular, rescaling with the domain-averaged minimum throat width collapses the plastic-dominated response across porosities, identifying the dissipation-relevant geometric scale for viscoplastic transport in this regime.

2026-03-10T15:32:08Z Cláudio P. Fonte Elliott Sutton Kohei Ohie Eleanor Doman Yuji Tasaka Anne Juel http://arxiv.org/abs/2605.11004v1 2026-05-10T04:08:42Z

The limitations of conventional mineral oil-based lubricants motivate the development of environmentally benign emulsions capable of providing lubrication and heat dissipation in demanding applications. In this study, nano-organoclay (Garamite 1958)-stabilized thixotropic water-in-oil Pickering emulsions are developed using sunflower oil as the base. The rheological and tribological properties of the emulsion system are systematically examined. Rheological findings reveal a pronounced increase in yield stress, shear thinning and thixotropic behavior on increasing Garamite loading percentage in the emulsion. The tribological performance is assessed against dry, water, and oil-lubricated conditions for a steel-steel interface under high contact pressure. The findings indicate that the tribological performance is significantly influenced by the microstructure and thixotropic behavior of the emulsions. The emulsion with the optimal nano-clay concentration demonstrates approximately 41\% and 84\% lower friction and approximately 80\% and 96\% lower wear than oil and water, respectively. The emulsion exhibits sensitivity to the sliding direction and displays load-responsive friction behavior with a memory effect owing to the reversible structuring of the clay-droplet network. This superior performance is attributed to the combined effects of thixotropy, anisotropic nanoclay morphology, and stable droplet armoring, which form a robust and adaptive interfacial film. This study advances the understanding of Pickering emulsions in metallic tribosystems by correlating the microstructure and rheology with tribological performance, thereby facilitating the design of high-performance, smart, and eco-conscious lubricants for metallic systems.

2026-05-10T04:08:42Z 21 pages, 10 figures, SI Arun Kumar Rahul Yadav Yogesh M. Joshi Manjesh K. Singh http://arxiv.org/abs/2605.09289v1 2026-05-10T03:33:20Z

When subjected to specific prestresses, continuum elastic shells can exhibit geometric zero modes: complex motions that require vanishing elastic energy to excite, enabling them to be driven by weak and generic energy inputs. Despite recent interest in these modes, we understand very little about their dynamical properties. Non-Euclidean plates modeled on minimal surfaces are one example in which prestresses and geometry combine to produce a continuum of ground states that the plate can explore through a geometric zero mode. We demonstrate that a non-Euclidean plate with metric corresponding to Enneper's minimal surface exhibits the predicted continuous stability, but this degeneracy is ultimately lifted by aging. Despite developing a preferred configuration, the zero mode remains the softest mode. Using a combination of analytical theory and experiments, we show that the elastodynamics of this soft mode is captured by the dynamics of a damped pendulum. A periodic driving uncovers resonance phenomena in this pendulum mode, such as small oscillations and steady rotations, but mixes with an additional flapping mode at high frequencies.

2026-05-10T03:33:20Z Joseph C. Roback Carlos E. Moguel-Lehmer Katharina A. Fransen Christian D. Santangelo Ryan C. Hayward http://arxiv.org/abs/2605.09194v1 2026-05-09T22:18:42Z

Direct ink writing (DIW) using frontal ring-opening metathesis polymerization (FROMP) offers a compelling route to the rapid and energy-efficient fabrication of thermoset and elastomeric polymer architectures, leveraging a self-propagating exothermic curing reaction. While FP-DIW excels at freestanding path printing due to the rapid solidification, it is constrained by stringent rheological requirements, a lower bound on achievable feature size due to quenching, and the need for the reaction front to closely follow the nozzle during printing. Here, we overcome these constraints by leveraging embedded 3D printing to implement FP-DIW with delayed solidification, thereby decoupling shape retention and solidification from ink chemistry and rheology. The use of a yield-stress support medium enables extrusion of low-viscosity inks by suppressing gravitational and capillary instabilities, mitigating front quenching at small diameters, and allowing time-delayed solidification to fuse complex, overlapping, and mechanically interlinked features after deposition. Two complementary thermal initiation strategies are introduced:\ volumetric dielectric heating via microwaves and surface heating at the boundary of the support bath. Formulations based on dicyclopentadiene (DCPD), cyclooctadiene (COD), and mixtures thereof, result in tunable final mechanical properties with glass transition temperatures spanning $-50$ to $160 $$^\text{o}$C. The versatility of this approach is demonstrated through the fabrication of lattices, springs, mechanically interlocked, and multimaterial architectures. Compared to printing in air, this embedded approach introduces a substantially broader range of possible formulations, material properties, feature sizes, and architectures.

2026-05-09T22:18:42Z Mohammad Tanver Hossain Yun Seong Kim Pallab Layek Pranav Krishnan Youngbum Lee Minjiang Zhu Shubh Singh Philippe H. Geubelle Paul V. Braun Jeffery W. Baur Nancy R. Sottos Sameh H. Tawfick Randy H. Ewoldt http://arxiv.org/abs/2605.09172v1 2026-05-09T21:16:10Z

Non Newtonian flows are typically governed by intrinsic bulk rheology, which imposes strong constraints on transport through confined geometries. Here, we show that stable boundary lubrication can fundamentally alter this behavior by localizing shear within a thin, low-viscosity interfacial layer. As a result, the nonlinear rheological response of a broad class of complex materials, including yield-stress, shear-dependent, and thixotropic materials, is strongly suppressed during flow. Using analytical solutions of Stokes flow and numerical simulations, we demonstrate that lubrication-induced shear localization leads to an apparent Newtonianization of transport, in which the macroscopic flow response becomes primarily controlled by the lubricating layer and geometric confinement rather than the intrinsic material properties. In this regime, materials that would otherwise require large pressure gradients can be transported at substantially lower driving forces. Notably, this boundary-dominated transport enables gravity-driven passive flow with orders-of-magnitude enhancement in throughput compared to rigid-wall conduits. These results establish lubrication as a powerful mechanism for tuning and simplifying complex fluid transport, with implications for biological systems, soft and jammed materials, and energy-efficient fluids.

2026-05-09T21:16:10Z 13 pages, 7 figures Arvind Arun Dev Paszkal Papp Thomas M. Hermans Bernard Doudin http://arxiv.org/abs/2512.16884v7 2026-05-09T17:52:03Z

We consider a minimalist model of polar chiral active matter consisting of a spatially distributed ensemble of phase-slaved, overdamped, self-propelled agents whose phase dynamics follow a localized Kuramoto-Sakaguchi coupling. Importantly, the agents' chirality is widely distributed, constituting noise for the ensemble. We derive a formal isomorphism between the model and the overdamped Langevin equation of a disordered, resistively shunted Josephson array, placing individual agents in a tilted washboard potential. Agents that are trapped in this potential are locally phase-synchronized, whereas `slipping' agents that are not trapped feature a quantifiable phase slip velocity, and are subsequently constantly accumulating phase. We demonstrate that phase rigidity is maintained by information supercurrents. We perform a linearisation of the underlying Vlasov-Fokker-Planck equation, which identifies a kinetic Turing instability in the agent ensemble that selects a finite wavelength for the reordering of the active bath. Varying the dispersion in intrinsic oscillator frequencies, we perform a Monte-Carlo simulation that produces a disorder-broadened Adler-Ohmic crossover in the ensemble-averaged slip velocity, in agreement with the Josephson junction prediction. Lastly, we show that the polar alignment torque of the hypothesized 3D agent dynamics (going from $S^1$ to $S^3$ is equivalent to the Gilbert-damping term of the Landau-Lifshitz-Gilbert equation; azimuthal precession yields a Goldstone-mode in which the conservative response carries an effective inertia proportional to order parameter squared. This result provides a microscopic basis for the spin-wave transport assumed in inertial-spin models of flocking. Within its regime of validity (dry, polar, chiral agents under marginal synchronisation and with sufficient noise), the model is well-described as a dissipative spintronic fluid.

2025-12-18T18:50:02Z 21 pages, 9 figures Magnus F Ivarsen http://arxiv.org/abs/2510.04393v2 2026-05-09T15:40:46Z

A model of dissipative micromagnetics coupled to (visco-)elasticity is explored, following the procedures of the Ericksen-Leslie theory of nematic liquid crystals allowing for angular momentum due to magnetization. An outcome is the Landau-Lifshitz-Gilbert theory coupled to material spin. A further power-less augmentation to the angular momentum of the theory with classical kinetic energy density is also considered, with a preliminary exploration of its potential in representing the Einstein-de Haas and Barnett effects within continuum mechanics. A treatment of the continuum mechanics of hard magnetic soft materials as a constrained polar material is presented. The models of DeSimone and James (2002) and Zhao et al. (2019) are discussed as two different, namely energetically and kinematically, constrained models of magnetoelasticity encompassed within the overall framework.

2025-10-05T23:19:44Z This paper is to appear in the Journal of Elasticity Amit Acharya Siladitya Pal http://arxiv.org/abs/2603.25198v2 2026-05-09T08:13:22Z

We perform molecular dynamics simulations to investigate hydration structures and dynamics in seven water-containing polymers: PVA, PHEA, PHEMA, PBA, PMEMA, PEG, and PMEA. The analysis integrates four perspectives: the water-content dependence of the glass transition temperature $T_g$, polymer chain fluctuations characterized by dihedral angle distributions, hydrogen-bond lifetimes $τ_{\mathrm{HB}}$ between water and polymer functional groups, and the localization and exchange dynamics of confined water quantified by the distinct part of van Hove correlation function. Hydroxyl-containing polymers (PVA, PHEA, and PHEMA) exhibit relatively high dry-state $T_g$ values and its pronounced depression upon hydration. Chain fluctuations are limited, and $τ_{\mathrm{HB}}$ follows Arrhenius behavior, forming localized hydration shells. In contrast, PMEMA and PBA show low equilibrium water contents and hydrophobic character; although their dry-state $T_g$ values are moderately lower and less sensitive to water content, chain fluctuations remain small, and $τ_{\mathrm{HB}}$ also obeys Arrhenius behavior, with hydrophobic aggregation promoting water localization. PEG and PMEA display low dry-state $T_g$ values and weak water-content dependence. Greater rotational freedom around ether or methoxy oxygen atoms leads to larger chain fluctuations and loosely bound water. Below $T_g$, $τ_{\mathrm{HB}}$ between water and ether or methoxy oxygen atoms exhibits super-Arrhenius behavior. These results clarify three hydration types: highly hydrated (PVA, PHEA, and PHEMA), hydrophobic (PMEMA and PBA), and flexibly hydrated (PEG and PMEA), and provide a molecular-level framework for interpreting interfacial water governed by water-polymer interactions.

2026-03-26T09:04:53Z 12 pages, 7 figures for main text, 7 pages for supplementary material, to appear in J. Chem. Phys J. Chem. Phys. 164, 204903 (2026) Atsuki Hashimoto Kokoro Shikata Kang Kim Nobuyuki Matubayasi 10.1063/5.0335731 http://arxiv.org/abs/2605.08780v1 2026-05-09T08:11:11Z

How do solute concentration and molecular chemistry govern the transition from membrane saturation to destabilization? We address this using microsecond-scale molecular dynamics simulations of dipalmitoylphosphatidylcholine (DPPC) bilayers with chloroform (CHCl$_3$) and a homologous series of alkanols (methanol, ethanol, octanol) over $0-50\%$ concentrations. Although complete membrane melting is not observed within $1000\, ns$, all systems exhibit clear precursors of destabilization, including enhanced thickness fluctuations, reduced lipid order, and mechanical softening. Chloroform induces pronounced thinning and large fluctuations, consistent with deep, transient insertion. Methanol perturbs primarily the headgroup region, while ethanol shows intermediate behavior with partial insertion. Octanol preserves bilayer thickness at high concentrations due to lipid-like insertion but significantly increases fluctuations and interdigitation. Across all systems, increasing concentration decreases the area compressibility modulus and deuterium order parameter, accompanied by smoothing of lateral pressure profiles, indicating stress redistribution. Free energy analysis reveals increased membrane partitioning and reduced translocation barriers with concentration, strongest for octanol and weakest for methanol. These results demonstrate that membrane destabilization is governed by the interplay of insertion depth, interfacial crowding, and lipid packing disruption.

2026-05-09T08:11:11Z Anirban Polley http://arxiv.org/abs/2512.21528v2 2026-05-09T06:40:54Z

The sensory richness of coffee is widely recognised and arises from the complex chemistry and immersion in cultural practices of coffee preparation. In contrast, the physical complexity of espresso has received less attention. The multiphase reactive flow through a dissolving, elastic porous medium remains challenging to describe. Using a controlled experimental setup based on a café-grade espresso machine, we demonstrate that the interplay between elasticity and porosity governs the long-time flow rate during espresso extraction and, consequently, the concentration of solubles in the final beverage. We introduce a minimal model that captures the resulting non-linear pressure-flow relationship and propose a methodology capable of reproducing the time-dependent behaviour of the espresso brewing process. Finally, we show that dissolution dynamics play a central role in determining the temporal evolution of flow during extraction.

2025-12-25T06:40:47Z 12 pages, 10 figures, accepted in Phys. Fluids Radost Waszkiewicz Franciszek Myck Łukasz Białas Maria Puciata-Mroczynska Michał Dzikowski Piotr Szymczak Maciej Lisicki http://arxiv.org/abs/2512.05149v2 2026-05-09T02:29:48Z

Entangled structures such as textiles and architected materials are often doubly periodic. Due to this property and their finite transverse thickness, the symmetries of these materials are described by the crystallographic layer groups. While orbifold notation provides a compact topological description and classification of the planar wallpaper groups, no analogous framework has been available for the spatial layer groups. In this article we develop an orbifold theory in three dimensions and introduce a complete set of Conway-type symbols for all layer groups. To illustrate its applicability, we analyze several knitted fabric motifs and show how their layer-group symmetries are naturally expressed in this new orbifold notation. This work establishes a foundation for the topological classification of doubly periodic structures beyond the planar setting.

2025-12-03T07:02:02Z Sonia Mahmoudi Elizabeth J. Dresselhaus Michael S. Dimitriyev http://arxiv.org/abs/2601.02654v2 2026-05-09T01:30:34Z

The Euler buckling of rods is a long-studied mechanical instability, and it remains relevant to this day, as the constituent components in many biological and physical systems are linear polymers, such as microtubules or carbon nanotubes. At finite temperature, if a polymer is shorter than its persistence length, the polymer is semiflexible, and its elasticity remains rod-like. But polymers can also stretch due to their finite extensibility, which can couple to energetically cheap bending deformations in nonlinear ways when a load is applied to the system. We show how the interplay between thermal fluctuations and nonlinear elasticity dramatically modifies the Euler buckling instability for compressed semiflexible polymers in a fixed strain ensemble. We identify a Ginzburg-like length scale beyond which thermally excited undulations lead to a softened Young's modulus, while the polymer nevertheless remains semiflexible. Both perturbative calculations and numerical Monte Carlo simulations suggest a qualitative change in several scaling properties of the buckling transition. The critical compressional strain for thermal buckling now increases with system size, in contrast to athermal buckling, where it decreases with system size. Renormalization group calculations confirm this picture, and also show that thermal buckling is controlled by a new fixed point with different critical exponents compared to classical Euler buckling.

2026-01-06T02:10:10Z 22 pages, 15 figures (additional clarifications provided with results unchanged) Phys. Rev. E 113, 055418 (2026) Richard Huang David R. Nelson Suraj Shankar 10.1103/22w1-mvfb http://arxiv.org/abs/2510.09900v2 2026-05-08T21:34:47Z

Common force fields overestimate the hydration free energies of hydrophobic solutes, leading to an exaggerated hydrophobic effect. We compute the hydration free energies of linear alkanes from methane to eicosane (C${20}$H${42}$) using free energy perturbation with various three-site (SPC/E, OPC3) and four-site (TIP4P/2005, OPC) water models in combination with the TraPPE-UA alkane force field. All water models overestimate hydration free energies, although the four-site models perform better than the three-site ones. Using alkane cavity free energies, we reparameterize the alkane-water Lennard-Jones well depth to bring simulation results in agreement with experimental and group-contribution estimates at 300 K. The reparameterized models significantly improve agreement with experiments across temperatures (290--350 K). We also show that the General Amber Force Field (GAFF) with TIP4P/2005 water provides closer agreement with experimental hydration free energies than the original TraPPE-UA/TIP4P/2005 combination. Finally, we show that applying a shifted Lennard-Jones potential introduces systematic deviations in the hydration free energies.

2025-10-10T22:24:53Z The Journal of Physical Chemistry B, Volume 130, Issue 17, 2026 Yalda Ramezani Sumit Sharma 10.1021/acs.jpcb.5c07832 http://arxiv.org/abs/2605.07759v1 2026-05-08T14:03:20Z

Self-encapsulated droplets floating at an oil--air interface undergo striking shape changes during evaporation, including flattening and localized loss of membrane tension leading to crumpling and wrinkling. Here we combine experiments, modeling and simulations to obtain predictive morphological maps. We perform contact-angle and evaporation experiments on water droplets coated by a hydrophobin protein film and floating in a fluorinated oil, providing reference profiles and volume-loss sequences for quantitative validation. We develop an axisymmetric mechanics framework in which equilibria follow from minimization of a total free energy combining surface energies, membrane strain energy and gravitational potential, subject to volume and contact-line constraints. A quasi-convex tension-relaxation rule accounts for compression-free states and enables coexistence of taut, wrinkled (one principal tension vanishes) and crumpled (both vanish) membrane domains. A finite element algorithm computes quasi-static morphing under volume reduction; key parameters are identified by fitting the reference contact-angle profile and then used without further tuning. The model reproduces the experimentally observed shape evolution and resolves the associated stress redistribution. Systematic parameter scans yield morphological phase diagrams governed by the Bond number, the oil--droplet surface-tension ratio and the density ratio. For buoyant droplets, crumpling relocates between exposed and submerged caps as parameters vary; for heavy droplets, a crossover to circumferential wrinkling along the immersed sidewall emerges. Wall-meniscus variations shift phase boundaries and can suppress bottom crumpling, consistent with wall-affected experiments.

2026-05-08T14:03:20Z D. Andrini D. Riccobelli L. Gazzera S. Molteni P. Metrangolo P. Ciarletta http://arxiv.org/abs/2605.07754v1 2026-05-08T13:57:54Z

We study the deformation of a two-dimensional viscous droplet in simple shear in the presence of odd viscosity. We derive an analytical solution for the droplet shape and surrounding flow field within the framework of odd Stokes flow, allowing for differences in both even and odd viscosity between the droplet and the surrounding fluid. This solution yields closed-form expressions for the macroscopic apparent even and odd viscosities of a dilute emulsion. We show that, provided all viscosity differences remain moderate, the steady-state Taylor deformation parameter satisfies $D_T^\infty = \text{Ca} + \mathcal{O}(\text{Ca}^2)$ so that the leading-order droplet deformation is unchanged from the classical (even-viscous) result. Nevertheless, pronounced effects emerges beyond leading order, where our direct numerical simulations reveal odd-viscous differences to the droplet deformation. In addition, we show that the flow is influenced only by the difference in odd viscosity between the droplet and the medium and not on their individual values. Our analysis clarifies how odd viscosity might modify the effective rheology of dilute emulsions and provides a framework for interpreting droplet-based measurements of odd-viscous response. Key words: odd viscosity $|$ droplets $|$ emulsions $|$ surface tension $|$ chiral fluids

2026-05-08T13:57:54Z Thomas Appleford Hugo França Maziyar Jalaal